Synthesis and photovoltaic investigation of dithieno[2,3‐d:2′,3′‐d′]‐benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene‐based conjugated polymer with an enlarged π‐conjugated system

Compared with benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (BTT), an extended π‐conjugation fused ring derivative, dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (DTBTT) has been designed and synthesized successfully. For investigating the effect of extending conjugation, two wide‐bandgap (WBG) benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based conjugated polymers (CPs), PBDT‐DTBTT, and PBDT‐BTT, which were coupled between alkylthienyl‐substituted benzo[1,2‐b:4,5‐b′]dithiophene bistin (BDT‐TSn) and the weaker electron‐deficient dibromides DTBTTBr₂ and BTTBr₂ bearing alkylacyl group, were prepared. The comparison result revealed that the extending of conjugated length and enlarging of conjugated planarity in DTBTT unit endowed the polymer with a wider and stronger absorption, more ordered molecular structure, more planar and larger molecular configuration, and thus higher hole mobility in spite of raised highest occupied molecular orbital (HOMO) energy level. The best photovoltaic devices exhibited that PBDT‐DTBTT/PC₇₁BM showed the power conversion efficiency (PCE) of 2.73% with an open‐circuit voltage (V_OC) of 0.82 V, short‐circuit current density (J_SC) of 6.29 mA cm^?2, and fill factor (FF) of 52.45%, whereas control PBDT‐BTT/PC₇₁BM exhibited a PCE of 1.98% under the same experimental conditions. The 38% enhanced PCE was mainly benefited from improved absorption, and enhanced hole mobility after the conjugated system was extended from BTT to DTBTT. Therefore, our results demonstrated that extending the π‐conjugated system of donor polymer backbone was an effective strategy of tuning optical electronic property and promoting the photovoltaic property in design of WBG donor materials.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

Three‐Component One‐Pot Synthesis of Indeno[2′,1′:5,6]Pyrido[2,3‐d]Pyrazole Derivatives in Aqueous Media

A series of indeno[2′,1′:5,6]pyrido[2,3‐d]pyrazoles was synthesized by the three‐component reaction of aldehyde, 5‐amino‐3‐methyl‐1‐phenylpyrazole and 1,3‐indenedione in the presence of SDS in aqueous media. The structures were characterized by IR, ¹H NMR, high resolution mass spectra and were further confirmed by X‐ray diffraction analysis.     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

One‐Pot Four‐Component Synthesis of Thieno[2,3‐d]pyrimidin‐4‐amines via Sequential Gewald/Cyclocondensation Reactions

A one‐pot four‐component synthesis of thieno[2,3‐d]pyrimidin‐4‐amines via sequential Gewald/cyclocondensation reactions is described. 2‐Aminothiophene‐3‐carbonitriles obtained from the Gewald reaction between cyclic ketones, malononitrile, and sulfur underwent a condensation? cyclization reaction with benzonitriles under solvent‐free conditions to afford the title compounds in excellent yields.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

One‐pot Sequential Reactions Featuring a Copper‐catalyzed Amination Leading to Pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines and Dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines

Tetracyclic skeletons combining an imidazo[1,2‐a]pyridine moiety with a quinoline framework such as pyrido[2′,1′:2,3]imidazo[4,5‐b]quinoline are stimulating increasing interests since they are close isosteres of a series of powerful antiproliferative compounds. In this paper, we report a novel methodology for the synthesis of pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines through one‐pot sequential reactions of commercially available or readily obtainable 2‐aminopyridines, 2‐bromophenacyl bromides, aqueous ammonia, and aldehydes. Moreover, dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines could also be obtained in a similar manner by using various ketones as the substrates in place of aldehydes. Notably, the whole procedure combines condensation/amination/cyclization reactions in one pot to give complex compounds in a simple and practical manner. Compared with literature methods, the synthetic strategy reported herein has the advantages of readily available starting materials, structural diversity of products, good functional group tolerance, and obviation of step‐by‐step operations.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

New Convenient Five‐Component One‐Pot Synthesis of 3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile Derivatives

3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile derivatives were synthesized through a one‐pot five‐component condensation reaction.     

A Novel and Efficient Synthesis of Pyrido[1,2‐a]‐Fused 1,3‐Diazaheterocyclic Compounds via a One‐Pot Three‐Component Reaction

An efficient one‐pot synthesis of pyrido[1,2‐a]‐fused 1,3‐diazaheterocyclic compounds by three‐component reaction of diamine, nitroketene dithioacetal (=1,1‐bis(methylsulfanyl)‐2‐nitroethene), and electron‐poor itaconic anhydride (=2‐methylidenesuccinic anhydride=2‐methylidenebutanedioic anhydride) in aqueous EtOH is reported. This protocol has the advantages of easiness, higher yields, and shorter reaction times. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

MIL‐53(Fe) Metal–Organic Frameworks (MOFs) as an Efficient and Reusable Catalyst for the One‐Pot Four‐Component Synthesis of Pyrano[2,3‐c]‐pyrazoles

A novel and simple approach for the efficient and rapid synthesis of pyrano[2,3‐c]‐pyrazoleshas been accomplished via the four‐component condensation reaction of malononitrile, hydrazine hydrate, ethyl acetoacetate, and substituted aldehydes using MIL‐53(Fe) metal–organic framework (MOF) as a catalyst in ethanol at room temperature. Recycling studies have shown that the MIL‐53(Fe) can be readily recovered and reused six times without significant loss of its activity. The present protocol offers the advantages including short reaction times, simple workup, high yields, elimination of toxic solvents, no chromatographic purification and recoverability of the catalyst. Also, the catalyst was fully characterized by SEM, EDX, FT‐IR, XRD, TGA and TEM analysis.     

Bridgehead Bicyclo[4.4.0]boron Heterocycles: A One‐Pot Four‐Component Synthesis of Dibenzo[e,i][1,3,7,2]oxadiazaborecin‐8(7H)‐ones

A one‐pot four‐component synthesis of 6‐aryl‐6H‐dibenzo[e,i][1,3,7,2]oxadiazaborecin‐8(7H)‐ones is described. Heating a mixture of isatoic anhydride and a benzylamine afforded the corresponding anthranilamide derivative, which was condensed with a 2‐hydroxybenzaldehyde and an arylboronic acid under solvent‐free conditions to produce bridgehead bicyclo[4.4.0]‐boron heterocycles in good to excellent yields. Single‐crystal X‐ray analysis conclusively confirms the structures of the obtained bridgehead bicyclic 6–6 heterocyclic compounds.     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

An Efficient Synthesis of Chromeno[2,3‐d]pyrimidine‐2,4‐diones with a Nitroketene‐Aminal Moiety at C(5) by a One‐Pot Four‐Component Reaction

An efficient and novel synthesis of chromeno[2,3‐d]pyrimidine‐2,4‐dione derivatives with a nitroketene‐aminal moiety at C(5) via four‐component reaction of salicylaldehydes, barbituric acid, diamines, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene in EtOH and in the presence of AcOH is reported. Easy performance, good yields, and easy purification are the main advantages of this method. All structures were confirmed by IR, MS, and ¹H‐ and ¹³C‐NMR, and by X‐ray crystal‐structure analyses. A plausible mechanism for this type of reaction is proposed (Scheme).     

Facile One‐Pot Synthesis of Monosubstituted 1‐Aryl‐1H‐1,2,3‐triazoles from Arylboronic Acids and Prop‐2‐ynoic Acid (=Propiolic Acid) or Calcium Acetylide (=Calcium Carbide) as Acetylene Source

The synthesis of monosubstituted 1‐aryl‐1H‐1,2,3‐triazoles was achieved in a one‐pot reaction from arylboronic acids and prop‐2‐ynoic acid or calcium acetylide (=calcium carbide), respectively, as a source of acetylene, with yields ranging from moderate to excellent (Scheme 1, Table 2). The reaction conditions were successfully applied to arylboronic acids, including analogs with various functionalities. Unexpectedly, the 1,2,3‐triazole moiety promoted a regioselective hydrodebromination (Scheme 2).     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

One‐Pot Synthesis of Novel Pyrrolo[1,2‐a]quinoxaline‐4(5H)‐ones Using Benzene‐1,2‐diamine,Acetylenedicarboxylates, and β‐Nitrostyrene Derivatives

The reaction between a variety of o‐phenylenediamines (=benzene‐1,2‐diamines), dialkyl acetylenedicarboxylates, and derivatives of nitrostyrene (=(E)‐(2‐nitroethenyl)benzene) in the presence of sulfamic acid (SA; H₃NSO₃) as catalyst led to the corresponding pyrrolo[1,2‐a]quinoxaline‐4(5H)‐one derivatives in high yields.     

One‐Pot,Four‐Component Synthesis of Fully Substituted 1,3,4‐Oxadiazole Derivatives from (Isocyanoimino)triphenylphosphorane,a Primary Amine,an Aromatic Carboxylic Acid,and Chloroacetone

The 1 : 1 imine intermediate 7 generated by the addition of a primary amine 2 to chloroacetone ( 1 ) is trapped by (isocyanoimino)triphenylphosphorane ( 4 ) in the presence of an aromatic carboxylic acid 3 and leads to the formation of the corresponding iminophosphorane intermediate 9 (Scheme 2). The 1,3,4‐oxadiazole derivatives 5 are then formed via an intramolecular aza‐Wittig reaction of the iminophosphorane intermediate 9 . The reactions were completed under neutral conditions at room temperature. The fully substituted 1,3,4‐oxadiazole derivatives 5 were produced in high yields (Table).     

Silica Nanoparticles as a Highly Efficient Catalyst for the One‐Pot Synthesis of 2‐Hydroxyacetamide Derivatives from Isocyanides and Electron‐Poor Aromatic Aldehydes

Reaction of an isocyanide with an electron‐poor aromatic aldehyde in the presence of silica nanoparticles (silica NP; ca. 42 nm) proceeds smoothly at room temperature to afford 2‐hydroxyacetamide derivatives in high yields (Scheme 1 and Table 1).