Electrosynthesis of Poly(para)phenylene in an Ionic Liquid: Cyclic Voltammetry and in Situ STM/Tunnelling Spectroscopy Studies

The electropolymerization of benzene in the air and water‐stable ionic liquid 1‐hexyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIm)FAP is investigated. The study comprises cyclic voltammetry, IR and in situ STM/tunnelling spectroscopy measurements. The IR results indicate that poly(para)phenylene is the end product of the electropolymerization of benzene in the employed ionic liquid. The resulting conjugation lengths of the product fall between 19 and 21. A polymer reference electrode is used successfully for the electrochemical polymerization of benzene. The first in situ STM results show that the electropolymerization of benzene in the ionic liquid can be probed on the nanoscale and the band gap of the prepared polymer can be determined. The electrodeposited polymer film obtained at a constant potential of 1.0 V vs PPP (polyparaphenylene) exhibits a band gap of 2.9±0.2 eV.     

The Effect of the Buffering Capacity of the Supporting Electrolyte on the Electrochemical Oxidation of Dopamine and 4‐Methylcatechol in Aqueous and Nonaqueous Solvents

Dopamine was electrochemically oxidized in aqueous solutions and in the organic solvents N,N‐dimethyl‐formamide and dimethylsulfoxide containing varying amounts of supporting electrolyte and water, to form dopamine ortho‐quinone. It was found that the electrochemical oxidation mechanism in water and in organic solvents was strongly influenced by the buffering properties of the supporting electrolyte. In aqueous solutions close to pH 7, where buffers were not used, the protons released during the oxidation process were able to sufficiently change the localized pH at the electrode surface to reduce the deprotonation rate of dopamine ortho‐quinone, thereby slowing the conversion into leucoaminochrome. In N,N‐dimethylformamide and dimethylsulfoxide solutions, in the absence of buffers, dopamine was oxidized to dopamine ortho‐quinone that survived without further reaction for several minutes at 25 °C. The voltammetric data obtained in the organic solvents were made more complicated by the presence of HCl in commercial sources of dopamine, which also underwent an oxidation process.     

Electrochemistry of Benzophenanthridine Alkaloids. Formation and Characterization of Redox Active Films from Products of Sanguinarine and Chelerythrine Oxidation

The behavior of sanguinarine and chelerythrine alkaloids upon electrochemical oxidation on solid electrodes in buffered aqueous medium is reported in this study. Electro‐oxidation of sanguinarine and chelerythrine results in the formation of redox active electropolymerized films. The films were characterized by cyclic voltammetry, EQCM and surface enhanced Raman scattering spectroscopy excited in near‐infrared range. The electropolymerization is suggested to proceed via formation of alkaloids' ortho‐benzoquinone derivatives.     

Electrochemical Detection of Glutathione Using a Poly(caffeic acid) Nanocarbon Composite Modified Electrode

A modified glassy carbon electrode was prepared through electropolymerization of caffeic acid in the presence of either carbon nanotubes or nano‐carbon drop cast onto the electrode surface. The voltammetric behaviour of the electrode was characterized using the ortho‐quinone moiety on the caffeic acid unit and the surface loading optimized for current response. The nanocomposite mediated electrode was used for the sensitive detection of glutathione at concentrations as low as 500 nM.     

Electrochemical polymerization of imidazolum‐ionic liquids bearing a pyrrole moiety

A series of imidazolium‐based ionic liquid monomers bearing a terminal pyrrole moiety were synthesized and electrochemically polymerized. It is found that the polymerizability of the synthesized ionic liquids is strongly dependent on the type of the counteranions. Although bromide monomer is not polymerizable, well‐defined polymeric films can be formed on various substrates in the cases of flour‐containing anions (BF₄^?, PF₆^?). The performed characterizations show that all resulting polypyrrole films are electroactive, and the imidazolium‐based ionic liquid moieties are correctly incorporated in polymer films during the electropolymerization process. This work not only provides a facile new method to immobilize ionic liquids on solid surface. Interestingly, without use of any template unique “knit” morphology and nanostructure, even hierarchical structures could also be produced by the electropolymerization of these new functionalized pyrrole monomers. We found that the properties of the pendant ionic liquid units on the surface of the formed polymer films preserved, and by simple anion exchange their surface energy and tension could be easily tuned without loss of the electrical, optical properties, and morphology of the polypyrrole films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4151–4161, 2008     

Synthesis and properties of new fluorinated ester,thioester, and amide substituted polythiophenes. Towards superhydrophobic surfaces

A series of new fluorinated polythiophenes has been synthesized by oxidative chemical and electrochemical polymerization and by Ullmann coupling. The substitution with the perfluoroalkyl alkyl chain CH₂CH₂C₆F₁₃ on the 3 position of the thiophene ring is performed via an ester, thioester, or amide connector, (CH₂)_m‐C(O)X, m = 0–2, with a view to investigating the role of the linker on the polymerization and on the properties of the corresponding polymers. The bromination of the monomers at the 2 and 5 positions allows the use of Ullmann coupling to form soluble fluorinated oligomers. The electron affinity was determined from cyclic voltammetry and a value of 3.1 eV was found for the ester derivative; such materials represent interesting candidates for use in light‐emitting devices or as an electron accepting material in photodiodes/solar cells. The oxidative polymerizations need the connector to be spaced out from the heterocycle to reduce its withdrawal effect. The ester, thioester, and amide spacer determined to a large extent the efficiency of the oxidative polymerization, and particularly the electropolymerization, as well as the solubility of the polymers formed. All the polymers were analyzed by GPC and by UV–visible and fluorescence spectroscopies. The electrochemical oxidation of the thioester and amide group prevents the formation of electroactive films by electropolymerization. But in the case of the ester group, the electroformed polymer exhibits exceptional stable superhydrophobic and lipophobic properties because of a porous surface and the presence of a fluorinated chain that confers low surface energy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4707–4719, 2007     

Anionic polymerization of o‐substituted styrene derivatives: Control of reactivity and stereochemistry by aminomethyl group

Ortho‐substituted styrenes, such as 2‐(N,N‐dimethylaminomethyl)styrene ( 1 ), 2‐(1‐pyrrolidinylmethyl)styrene ( 2 ), and 2‐[(S)‐2‐(1‐pyrrolidinylmethyl)‐1‐pyrrolidinylmethyl]styrene ( 3 ), were synthesized, and the effects of the ortho‐substituents on the polymerizability and stereoregularity of the obtained polymers using the anionic method were examined. The bulkiness and coordination of the ortho‐substituted amino groups to the counter cation significantly affected the polymerizability and stereochemistry of the obtained polymers. The anionic and radical polymerizations of 2 with a less hindered ortho‐substituent afforded polymers in good yields, whereas those of 1 and 3 resulted in lower yields. The anionic polymerization of 3 bearing an optically active diamine derivative at the ortho‐position with n‐butyllithium in toluene at 0 °C gave a polymer with a high stereoregularity and stable regular conformation based on the stereoregular backbone structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4088–4094, 2000     

Nanofold‐decorated surfaces from the electrodeposition of di‐alkyl‐cyclopentadithiophenes

This work describes the synthesis and subsequent electrodeposition of 4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene (cyclopentadithiophene) monomers di‐substituted with alkyl chains. Each monomer was electropolymerized in solution to observe their capacity at creating well‐structured, rough surfaces. The length of the alkyl chain substituent has a significant influence on the overall surface morphology and wetting behavior after electropolymerization. In the case of nonsubstituted cyclopentadithiophene monomers or those with short alkyl (methyl and ethyl) substituents, the polymerization proceeds readily, forming rough surfaces that follow the Wenzel regime of wetting. In these cases, the surfaces were decorated with globular agglomerates and woven mat features. The measured surface roughness decreases with alkyl chain length as steric hindrance caused by the alkyl substituents limits electropolymerization. As the alkyl chain substituent increases to propyl chain length and beyond, the increase in steric hindrance is so significant that the surface morphology formed during electrodeposition is primarily due to π‐stacking interactions between very short oligomers formed in solution. With propyl and butyl substituents, nanofold morphology is observed, leading to surfaces with much higher contact angles with water (~132°) that follow the Cassie‐Baxter regime of wetting. This type of surface morphology has only been demonstrated one other time and with the use of fluorinated constituents. This work exposes a mild, fluorine‐free synthetic route to creating nanofold‐decorated surfaces.     

meta‐Selective C−H Arylation of Fluoroarenes and Simple Arenes

Fluorine is known to promote ortho‐C?H metalation. Based upon this reactivity, we employed an activated norbornene that traps the ortho‐palladation intermediate and is then relayed to the meta position, leading to meta‐selective C?H arylation of fluoroarenes. Deuterium experiment suggests that this meta‐arylation is initiated by ortho C?H activation and the catalytic cycle is terminated by C‐2 protonation. A dual‐ligand system is crucial for the observed high reactivity and site selectivity. Applying this approach to simple benzene or other arenes also affords arylation products with good yield and site selectivity.     

Hypervalent Activation as a Key Step for Dehydrogenative ortho CC Coupling of Iodoarenes

Building on earlier results, a direct metal‐free α‐ arylation of substituted cyclic 1,3‐diones using ArI(O₂CCF₃)₂ reagents has been developed; unlike other arylative approaches, the arylated products retain the iodine substituent ortho to the newly formed C?C bond. The mechanism is explored by using DFT calculations, which show a vanishingly small activation barrier for the C?C bond‐forming step. In fact, taking advantage of an efficient in situ hypervalent activation, the iodoarenes are shown to undergo a cross‐ dehydrogenative C?C coupling at the C?H ortho to the iodine. When Oxone is used as terminal oxidant, the process is found to benefit from a rapid initial formation of the hypervalent ArI(OR)₂ species and the sulfate‐accelerated final coupling with a ketone. This method complements the ipso selectivity obtained in the metal‐catalyzed α‐arylation of carbonyl compounds.     

New Insights into the Hexaphenylethane Riddle: Formation of an α,o‐Dimer

Upon reduction of a 1H‐cyclobuta[de]naphthalene‐4,5‐diylbis(diarylmethylium) species, a new C? C bond is formed between the C_α and C_ortho atoms of the two chromophores, which presents an unprecedented coupling pattern for the dimerization of two trityl units. By attaching an annulated cyclobutane ring at the opposite peri position of the naphthalene core, the distance between the C_α carbon atoms was elongated beyond the limit of σ‐bond formation through “scissor effects”. The suppression of C_α? C_α bond formation, which would lead to hexaphenylethane‐type compounds, is key to the first successful isolation of the α,o‐adducts. The 5‐diarylmethylene‐6‐triarylmethyl‐1,3‐cyclohexadiene unit in the α,o‐adducts is stable, and isomerization of the cyclohexadiene unit into an aromatic system was not observed. The newly formed C_α? C_ortho bond was cleaved upon two‐electron oxidation to regenerate the dicationic dye.     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Electrochemical Detection of Melamine

Poly(caffeic acid) polymer was immobilized onto the surface of a glassy carbon electrode via electropolymerization. Voltammetry shows a signal related to the two‐electron oxidation of the immobilized hydroquinone groups in the caffeic acid monomer units. The modified electrode in aqueous solution shows complexation of the electrogenerated o‐quinone species with melamine thus allowing in the electrochemical detection of melamine by recording the shift in potential of the oxidation signal of the polymer. Melamine detection was investigated in pure aqueous solutions and in the presence of milk powder solutions and the proposed analytical method of melamine detection in milk powder was applied successfully with an average recovery of ca. (91±7.9)%.     

Surface‐initiated ring‐opening polymerization of p‐dioxanone on Wang resin bead

Biodegradable poly(p‐dioxanone) (PPDO) was formed on Wang resin surface by surface‐initiated ring‐opening polymerization (SI‐ROP). The SI‐ROP of p‐dioxanone (PDO) was achieved by heating a mixture of Tin(II) bis(2‐ethylhexanoate) [Sn(Oct)₂], hydroxyl functionalized Wang resin, and PDO in anhydrous toluene at 80 °C. The resultant polymer‐grafted Wang resin (Wang‐g‐PPDO) was characterized by fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), optical microscopy (OM), and field‐emission scanning electron microscopy (FE‐SEM). The FTIR spectra of Wang‐g‐PPDO show peak characteristic of PPDO at 2943 cm^?1 (? C? H stretch), at 1741 cm^?1 (? C?O stretch), and 1136 cm^?1 (C? O? C stretch) indicating the formation of ester linkage between PPDO and hydroxyl terminated Wang resin. The DSC thermogram show melting peak corresponding to PPDO polymer on Wang resin surface. Thermogravimetric investigation shows increase in PPDO content on the Wang resin surface in terms of percentage of weight loss with increase in reaction time. The OM and SEM photographs clearly show the formation of PPDO polymer on the Wang resin surface without altering the spherical nature of Wang resin bead. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1178–1184, 2008     

Development of Biosensor for Catechol Using Electrosynthesized Poly(3‐methylthiophene) and Incorporation of LAC Simultaneously

Simultaneous electropolymerization of 3‐methylthiophene and incorporation of Laccase (LAC) was carried out in the presence of propylene carbonate as a medium by amperometric method. This enzyme modified electrode was used for the sensing of polyphenol. Catechol is taken as a model compound for the study. UV‐Vis spectral studies suggest no denaturation of LAC in presence of propylene carbonate. The SEM studies reveal the surface morphology and incorporation of LAC in P3MT with agglomerated flaky masses are observed in with and without enzyme micrographs. The cyclic voltammograms were recorded for 0.01 mM catechol on plain glassy carbon, polymer and enzyme incorporated electrodes at pH 6.0 and scan rate 50 mV s^?1. The fabricated electrochemical biosensor was used for the determination of catechol in aqueous solution by Differential Pulse Voltammetry (DPV) technique. The concentration linear range of 8×10^?8 to 1.4×10^?5 M a value of Michealis? Menten constant K_m=7.67 µmol dm^?3 and activation energy is 32.75 kJ mol^?1. It retains 83 % of the original activity after 60 days which is much higher than that of other biosensors. The developed biosensor was used to quantify catechol in the determination in real samples.     

Lead Determination by Anodic Stripping Voltammetry Using a p‐Phenylenediamine Modified Carbon Paste Electrode

Carbon paste electrodes were modified by mixing appropriate amounts of the monomers o‐phenylendiamine, p‐phenylendiamine and m‐phenylendiamine (o‐PD, p‐PD and m‐PD) into a graphite powder‐paraffin oil matrix. The electropolymerization of the incorporated phenylendiamine was then carried out in a carbon paste electrode in acidic medium by cyclic voltammetry between ?0.30 V and +0.90 or under constant potential. The modified carbon paste electrodes (MCPEs) obtained by this electropolymerization method were found to be useful for trace determination of Pb²⁺ in aqueous solutions. Lead(II) was first preconcentrated on the modified electrodes by complexation with the modifier, and the electrode was then transferred to an electrochemical cell. The best results in terms of sensitivity and detection limit were obtained with poly p‐phenylenediamine (poly (p‐PD)). For a 10‐min preconcentration time, the calibration plot was linear from 5×10^?8 mol L^?1 to 10^?5 mol L^?1, with r²=0.999 and relative standard deviation equal to 5%. However, the lowest lead concentration that could be detected was 10^?9 mol L^?1. Interference from metal ions like Cd(II), Hg(II), Zn(II), Fe(II) and Cu(II) was also studied.     

Stereoselective Synthesis of 1,3‐Diaminotruxillic Acid Derivatives: An Advantageous Combination of CH‐ortho‐Palladation and On‐Flow [2+2]‐Photocycloaddition in Microreactors

The stereoselective synthesis of ε‐isomers of dimethyl esters of 1,3‐diaminotruxillic acid in three steps is reported. The first step is the ortho‐palladation of (Z)‐2‐aryl‐4‐aryliden‐5(4H)‐oxazolones 1 to give dinuclear complexes 2 with bridging carboxylates. The reaction occurs through regioselective activation of the ortho‐C?H bond of the 4‐arylidene ring in carboxylic acids. The second step is the [2+2]‐photocycloaddition of the C?C exocyclic bonds of the oxazolone skeleton in 2 to afford the corresponding dinuclear ortho‐palladated cyclobutanes 3 . This key step was performed very efficiently by using LED light sources with different wavelengths (465, 525 or 625 nm) in flow microreactors. The final step involved the depalladation of 3 by hydrogenation in methanol to afford the ε‐1,3‐diaminotruxillic acid derivatives as single isomers.     

Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA‐like) Film Modified Electrode

Complexing polymer‐coated electrodes have been synthesized by oxidative electropolymerization of ethylenediamine tetra‐N‐(3‐pyrrole‐1‐yl)propylacetamide (monomer L ). The presence of four polymerizable pyrrole fragments on the same EDTA skeleton was thought to confer enhanced rigidity and controlled dimensionality to the resulting complexing materials, which were used for the electrochemical detection of Hg(II), Cu(II), Pb(II) and Cd(II) ions by means of the chemical preconcentration‐anodic stripping technique. The polyamide electrode material showed particularly a significant selectivity towards mercury ions, even in the presence of a large excess of other metal cations. Moreover, the use of imprinted polymer‐coated electrodes prepared by electropolymerization of L in the presence of metal cations turned out to significantly improve the detection limits, down to 5×10^?10 mol L^?1 for Hg(II) and Cu(II) species.     

Highly renewable,thermoplastic tetrapolyesters based on hydroquinone,p‐hydroxybenzoic acid or its derivatives,phloretic acid,and dodecanedioic acid

A series of tetrapolyesters were obtained by polymerizing phloretic acid, hydroquinone, p‐hydroxybenzoic acid, or its derivatives, that is, vanillic acid or syringic acid, and dodecanedioic acid. Each monomer was polymerized in its acetylated form, except for the diacid to undergo polymerization by acidolysis. Initial polymerizations had shown that the use of phloretic acid resulted in better polymer properties than with p‐coumaric acid. The predominantly renewable polymers were obtained by melt polymerization using a two‐stage condensation process whereby antimony(III) oxide was applied as catalyst. Monomer conversions were typically close to 90%. ¹H and ¹³C NMR, DSC, TGA, solution viscometry, and GPC were applied, as well as polarized microscopy to determine polymer microstructure and composition, transition temperatures, decomposition temperatures, intrinsic viscosities, and other molecular weight properties, and when applicable the liquid crystalline behavior of the polymers. All peaks, including end group peaks in the ¹³C NMR spectra were assigned, the monomer sequence distribution was verified to be random, and a complete dyad analysis involving nine dyads and eight peaks was performed. By using p‐hydroxybenzoic acid and its derivatives without any, one or two methoxy groups and varying the copolymer compositions, melting temperatures could be tuned between 106 and 181 °C. The tetrapolyesters, which included residues of p‐hydroxybenzoic acid, formed nematic liquid crystals. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1498–1507     

Electrochemical Characterization of Myoglobin‐Polylysine Films at a Temperature Range of 6–80 °C

This work demonstrated for the first time that myoglobin cross‐linked in polylysine films is electrochemically active at 6 °C. At 6 °C, these protein films exhibited reversible reduction/oxidation peaks which are characteristic of Fe^III/Fe^II redox couple. The estimated current function densities (J=1.6×10^?4 C/V cm²), surface concentrations (Γ_T=0.10 nmol/cm²) and standard electron transfer constant (k_s=13.86 s^?1) at 6 °C for the data taken at a scan rate of 0.1 V/s were similar to those which were obtained at 10, 15 and 23 °C. Basically, this study shows a possible electrocatalytic application of these myoglobin/polylysine films, for example in low temperature sensing applications.