Nonaqueous CE ESI‐IT‐MS analysis of Amaryllidaceae alkaloids

The Amaryllidaceae are widely distributed medical plants. Lycorine, lycoramine, lycoremine, and lycobetaine are the major active alkaloids in Amaryllidaceae plants. A nonaqueous CE ESI‐IT‐MS method for separation, identification, and quantification of the Amaryllidaceae alkaloids has been developed. The MS^1–3 behavior has been studied and the fragmentation pathways of main fragment ions have been proposed. The effects of several factors such as composition and concentration of buffer, applied voltage, composition, and flow rate of the sheath liquid, nebulizing gas pressure, flow rate, and temperature of drying gas were investigated. Under the optimal conditions, the linear concentration range of these compounds was wide with the correlation coefficient (R²) >0.99. RSDs of migration time and peak areas were <10%. The LODs were <240 ng/mL. The proposed method can be successfully applied to the determination of the related alkaloids in the Lycoris radiata roots.     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

Analysis of glycerophospho‐ and sphingolipids by CE

Glycerophospholipids are amphiphilic molecules possessing polar head groups with a glycerol backbone and nonpolar variable long‐chain fatty acids. Numerous molecular species are found in a single class of glycerophospholipid, conferring to these lipids a high structural diversity. They are major components of biological membranes and participate in important activities involving cell signaling and substrate transport. Sphingolipids consist of long‐chain bases linked by an amide bond to a fatty acid and via the terminal hydroxyl group to complex carbohydrate or phosphorus moieties, constituting a complex family of compounds that also present an enormous structural variability. As important component of neuronal membranes, sphingolipids contribute to cellular diversity and functions and are associated with several neurodegenerative disorders. Moreover, they were studied in several foods due to their sensorial, reological, and antioxidant characteristics. In this work, the most relevant information available on glycerophospholipid and sphingolipid analysis by CE is reviewed. CE is a very promising analytical technique in polar lipid analysis, which provides high efficiency, relatively high resolution, and enormous versatility and requires small amounts of sample and solvent. MEKC and NACE methodologies have been developed as the most useful alternatives for these analyses by CE. Very interesting LODs have been achieved enabling the application of CE to the determination of glycerophospholipids and sphingolipids in several food and biological matrices.     

Spectrophotometric Determination of the Stability Constant of the Inclusion Complexes of Some Catechol Derivatives with β‐Cyclodextrin Based on Their Reaction with Iodate

The effects of β‐cyclodextrin (β‐CD) inclusion on the kinetics of the oxidation of several cathechol derivatives, including 4‐tert‐butylcatechol, 3‐methylcatechol and 3‐methoxycatechol, with iodate was studied spectrophotometrically. The rate of the oxidation reactions decreased by increasing β‐CD concentration as a result of inclusion. The stability constants for the inclusion complexes of the investigated compounds were determined based on the changes in the rate constants as a function of β‐CD concentration at pH 3.0. The rate constants for the free and complexed forms and also the stability constants for the inclusion complexes were calculated. The role of the hydrophobic effect was evaluated by studying the influence of the presence of different amounts of ethanol on the β‐CD: guest interaction. In a given H₂O‐EtOH mixture the stability of β‐CD complexes shows the order of 4‐tert‐butylcatechol ≈ 3‐methylcatechol ≈ 3‐methoxycatechol. Increasing ethanol content caused a decrease in the stability constant of the inclusion complexes and an increase in observed rate constants.     

Quantitative structure–activity relationship model for prediction study of corrosion inhibition efficiency using two‐stage sparse multiple linear regression

A new quantitative structure–activity relationship (QSAR) of the inhibition of mild steel corrosion in 1 M hydrochloric acid using furan derivatives was developed by proposing two‐stage sparse multiple linear regression. The sparse multiple linear regression using ridge penalty and sparse multiple linear regression using elastic net (SMLRE) were used to develop the QSAR model. The results show that the SMLRE‐based model possesses high predictive power compared with sparse multiple linear regression using ridge penalty‐based model according to the mean‐squared errors for both training and test datasets, leave‐one‐out internal validation (Q²_int = 0.98), and external validation (Q²_ext = 0.95). In addition, the results of applicability domain assessment using the leverage approach reveal a reliable and robust SMLRE‐based model. In conclusion, the developed QSAR model using SMLRE can be efficiently used in the studies of corrosion inhibition efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

l‐Lysine‐derived ionic liquids as chiral ligands of Zn(II) complexes used in ligand‐exchange CE

Amino acid ionic liquids (AAILs) with l ‐lysine (l ‐Lys) as anion were synthesized and applied as new chiral ligands in Zn(II) complexes for chiral ligand‐exchange CE. After effective optimization, baseline enantioseparation of seven pairs of dansylated amino acids was achieved with a buffer of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM ZnSO₄, and 6.0 mM [C₆mim][l ‐Lys] at pH 8.2. To validate the unique behavior of AAILs, a comparative study between the performance of Zn(II)‐l ‐Lys and Zn(II)‐[C₆mim][l ‐Lys] systems was conducted. In Zn(II)‐[C₆mim][l ‐Lys] system, it has been found that the improved chiral resolution could be obtained and the migration times of the three test samples were markedly prolonged. Then the separation mechanism was further discussed. The role of [C₆mim][l ‐Lys] indicated clearly that the synthesized AAILs could be used as chiral ligands and would have potential utilization in separation science in future.     

Analysis of N‐acetylaminosugars by CE: A comparative derivatization study

N‐linked or O‐linked glycans derived from glycoprotein processing carry, an N‐acetylglucosamine or an N‐acetylgalactosamine respectively, at their reducing termini. The presence of the N‐acetylamino group on C‐2 of reducing sugar residues has been reported to hamper the derivatization reaction with a chromophore at the anomeric centre. In this paper N‐acetyllactosamine, N‐acetylglucosamine, N‐acetylgalactosamine and several other neutral monosaccharides are coupled to three different dyes (4‐aminobenzonitrile, 2‐aminopyridine, 2‐aminobenzoic acid (2‐AA)) by reductive amination and analysed by CE with UV detection. The 2‐AA derivatives showed the lowest concentration detection limits, varying approximately in the 2–3 μM range for the saccharides tested including the N‐acetamido ones. The possibility to separate and detect with the same sensitivity ten 2‐AA‐labelled monosaccharides mainly found in mammalian or plant glycoproteins in a single CE run is highlighted. The analysis has been carried out in less than 25 min using the borate‐complexation method in CZE mode. The influence of the strength of the acid used as catalyst in the chemical modification of the sugars with 2‐AA is also shortly addressed.     

Albumin‐bound low molecular weight thiols analysis in plasma and carotid plaques by CE

We describe a new method for the quantification of low molecular weight thiols, as homocysteine, cysteine, cysteinylglycine, glutamylcysteine and glutathione bound to human plasma albumin. After albumin isolation and purification by SDS‐PAGE, thiols were freed from protein with tri‐n‐butylphosphine and successively derivatized with 5‐iodoacetamidofluorescein. Samples were then injected and quantified in about 18 min by CE with laser induced fluorescence detection. Precision tests indicate a good repeatability of the method both for migration times (RSD<0.63%) and areas (RSD<2.98%). The method allows to measure all five low molecular weight thiols released from just 3 μg of albumin thus improving the other described methods in which only three or four thiols were detected. Due to the elevated sensitivity (LOD of 0.3 pM for all thiols), also low molecular weight thiols bound to albumin filtered in tissues could be quantified.     

Quantitative analysis of thiols in consumer products on a microfluidic CE chip with fluorescence detection

A microchip CE-based method for the quantification of the thiols mercaptoethanoic acid (MAA) and 2-mercaptopropionic acid (2-MPA) in depilatory cream and cold wave lotions was developed. The thiols were first derivatized with the fluorogenic reagent ammonium-7-fluorobenzo-2-oxa-1,3-diazole-4-sulfonate (SBD-F). The derivatives were separated within only 20 s by microchip CE and detected by their fluorescence. Conventional CE with diode array detection and LC with fluorescence detection were used for validation. The internal standard 3-mercaptopropionic acid (3-MPA) provided RSDs of multiple injections of only 4% or less for the MCE approach. LOD is 2 microM, LOQ 6 microM, and the linear range comprises nearly three decades of concentration starting at the LOQ.     

Sieving properties of end group‐halogenated Pluronic polymer matrix in DNA separation under nondenaturing CE analysis

CE‐SSCP analysis is a well‐established DNA separation method that is based on variations in mobility caused by sequence‐induced differences in the conformation of single‐stranded DNA. The resolution of CE‐SSCP analysis was improved by using a Pluronic polymer matrix, and it has been successfully applied in various genetic analyses. Because the Pluronic polymer forms a micellar cubic structure in the capillary, it provides a stable internal structure for high‐resolution CE‐SSCP analysis. We hypothesized that formation of micellar cubic structure is influenced by the end hydroxyl group of the Pluronic polymer, which affords structural stability through hydrogen bonding. To test this hypothesis, the hydroxyl group was halogenated to eliminate the hydrogen bonding without disturbing the polarity of polymer matrix. CE‐SSCP resolution of two DNA fragments with a single base difference was significantly worse in the halogenated polymer matrices due to band broadening. The viscoelastic properties of control (which has hydroxyl group), chlorinated, and brominated F108 solution upon heating were also investigated by rheological experiments, and we found that gelation was significantly associated with resolution. In this series of experiments, the effect of the hydroxyl group in Pluronic polymer matrix on separation resolution of CE‐SSCP analysis was demonstrated.     

A PDMS sheath flow cuvette for high‐sensitivity LIF measurements in CE

A simple method for producing a sheath flow cuvette in PDMS suitable for post‐column detection in CE is described. Two types of cuvette were investigated. In the first, the sheath flow channel had a round cross‐section of approximately 635 μm diameter, whereas the second cuvette had a 300×300 μm² square channel. Both cuvettes produced laminar flows that ensheathed the separation capillary's effluent allowing sensitive fluorescence measurements. The elasticity of the PDMS allowed the 300×300 μm² square sheath flow channel to expand uniformly and accommodate the larger 330–340 μm od round separation capillary, producing a self‐aligning cuvette with robust mechanical properties. With this cuvette, linear calibrations of over five orders of magnitude and 15–30 zmol fluorescein detection limits were obtained for 12 and 50 μm id capillaries.     

Studies of protection of iron corrosion by rosin imidazoline self‐assembled monolayers

A type of rosin imidazoline (IM) has been synthesized using rosin acid and diethylenetriamine (DETA) as raw materials. The monolayers of IM were assembled on the surface of iron. The monolayers of the IM inhibitor were characterized by electrochemical impedance spectroscopy (EIS), electrochemical polarization curves and double‐layer capacitance. Surface analysis was carried out to establish the mechanism of corrosion inhibition of iron by X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy. The IM inhibitor showed good inhibition efficiency for iron in 0.1 M H₂SO₄. The inhibition mechanism of IM inhibitor was interpreted using molecular simulation. Copyright © 2006 John Wiley & Sons, Ltd.     

State‐of‐the‐art applications of cyclodextrins as functional monomers in molecular imprinting techniques: a review

As a versatile tool in separation science, cyclodextrins and their derivatives, known as emerging functional monomers, have been used extensively in molecular imprinting techniques. The attributes of cyclodextrins and their derivatives are widely known to form host–guest inclusion complex processes between the polymer and template. The exploitation of the imprinting technique could produce a product of molecularly imprinted polymers, which are very robust with long‐term stability, reliability, cost‐efficiency, and selectivity. Hence, molecularly imprinted polymers have gained popularity in chemical separation and analysis. Molecularly imprinted polymers containing either cyclodextrin or its derivatives demonstrate superior binding effects for a target molecule. As noted in the previous studies, the functional monomers of cyclodextrins and their derivatives have been used in molecular imprinting for selective separation with a wide range of chemical compounds, including steroidals, amino acids, polysaccharides, drugs, plant hormones, proteins, pesticides, and plastic additives. Therefore, the main goal of this review is to illustrate the exotic applications of imprinting techniques employing cyclodextrins and their derivatives as single or binary functional monomers in synthesizing molecularly imprinted polymers in areas of separation science by reviewing some of the latest studies reported in the literature.     

Site‐specific separation and detection of phosphopeptide isomers with pH‐mediated stacking capillary electrophoresis‐electrospray ionization‐tandem mass spectrometry

This study reported a pH‐mediated stacking CE coupled with ESI MS/MS method to determine the phosphorylation sites of three synthetic phosphopeptides containing structural isomers. These phosphopeptides mimic the phosphopeptides (amino acid residues 12–25) derived from the trypsin‐digested products of human lamin A/C protein. The LODs were determined to be 118, 132 and 1240 fmol for SGAQASS¹⁹TpPL²²SPTR, SGAQASS¹⁹TPL²²SpPTR, and SGAQASS¹⁹TpPL²²SpPTR, respectively. The established method was employed to analyze the phosphorylation sites of the trypsin‐digested products of glutathione S‐transferase‐lamin A/C (1–57) fusion protein that had been phosphorylated in vitro by cyclin‐dependent kinase 1. The results indicated that this method is feasible to specifically determine the phosphorylation site from phosphopeptide isomers in the trypsin‐digested products of a kinase‐catalyzed phosphoprotein, which should benefit the investigation of protein kinase‐mediated cellular signal transduction.     

Determination of micro‐RNA in cardiomyoblast cells using CE with LIF detection

Micro‐RNAs (miRNAs) are small, endogenous, singlestranded, and noncoding RNAs. The miRNAs have been found to perform important functions in many cellular processes, such as development, proliferation, differentiation, and apoptosis. Circulating miRNAs have been proposed as emerging biomarkers in diseases such as cancer, diabetes, and cardiovascular disease including acute myocardial infarction (AMI). In this study, we developed CE with LIF (CE‐LIF) using fluorescence‐labeled DNA probe for determination of low abundance miRNA in cell extracts. The target miRNA is miRNA‐499, a biomarker candidate of AMI with low abundance in biological samples. In order to measure the trace level of miRNA, we optimized the hybridization conditions such as hybridization time, temperature, and buffer solution. The highest fluorescence intensity of the hybridized miRNA‐499 was found when hybridization was conducted at 40°C in 50 mM Tris‐acetate (pH 8.0) buffer containing 50 mM NaCl, and 10 mM EDTA for 15 min. The hybridized miRNA‐499 was detected in cultured H9c2 cardiomyoblast cells and the analysis of miRNA‐499 was completed within 1 h using CE‐LIF. These results showed the potential of CE for fast, specific, and sensitive high‐throughput analysis of low‐abundance miRNAs in cell extracts, biofluids, and tissues.