Electroanalytical Determination of Paracetamol Using Pd Nanoparticles Deposited on Carboxylated Graphene Oxide Modified Glassy Carbon Electrode

The study presents a novel paracetamol (PA) sensor based on Pd nanoparticles (PdNPs) deposited on carboxylated graphene oxide (GO?COOH) and nafion (Nf) modified glassy carbon electrode (GCE). The morphologies of the as prepared composites were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and fourier transform infrared spectroscopy (FTIR). The experimental results demonstrated that Nf/GO?COOPd displayed excellent electrocatalytic response to the oxidation PA. The linear range was 0.04–800 μM for PA with limit of detection of 0.012 μM and excellent sensitivity of 232.89 μA mM^?1 cm^?2. By considering the excellent performance of Nf/GO?COOPd composite such as wider linear range, lower detection, better selectivity, repeatability, reproducibility, and storage stability, the prepared composite, especially GO?COOH support, with satisfactory electrocatalytic properties was a promising material for the modification of electrode material in electrochemical sensor and biosensor field.     

Artful union of a zirconium-porphyrin MOF/GO composite for fabricating an aptamer-based electrochemical sensor with superb detecting performance

More and more attentions have been focused on design and synthesis of novel metal-organic framework/graphene oxide (MOF/GO) composites with unique performance. Zirconium-porphyrin MOF (PCN-222) is in-situ synthesis with the existence of GO with −COOH group to artfully fabricate a PCN-222/GO composite. This composite can be employed as functional material to modify the working electrode. Thanks to excellent electrical conductivity of GO, abundant mesoporous channels and numerous Zr(IV) metal sites of PCN-222, this composite can immobilize a large amount of aptamer through strong π-π stacking interaction and high affinity between phosphate group of aptamer and Zr(IV) site of PCN-222 simultaneously. Hence, an ultra-sensitive electrochemical aptasensor based on PCN-222/GO composite can quantificationally detect trace chloramphenicol with limit of detection of 7.04 pg/mL (21.79 pmol/L) from 0.01 ng/mL to 50 ng/mL by electrochemical impedance spectroscopy even in real samples. Meanwhile, this fabricated aptasensor reveals good repeatability, outstanding selectivity and preferable long-term storage. This research provides a useful approach to construct MOF/GO composites for fabricating electrochemical aptasensors in the electrochemical detection field.     

Electrochemical Sensing of Chemical Warfare Agent Based on Hybrid Material Silver‐aminosilane Graphene Oxide

The threat from chemical warfare agents (CWAs) imparts an alarming call for the global community not limited to human being but also extends as unprecedented environmental threat, hence, timely detection and degradation in the event of CWAs attack is very crucial. Herein, we describe a hybrid material of 3‐aminopropyltriethoxysilane (APTES) modified graphene oxide (GO) on glassy carbon (GC) electrode along with electrodeposited silver nanodendrimers (AgNDs) for the electrochemical detection and degradation of CWA sulphur mustard (HD). The AgNDs/APTES‐GO hybrid material was characterized by SEM, EDX, BET, TGA, Raman, UV‐Vis, XPS and XRD techniques. The AgNDs/APTES‐GO modified GC electrode was also characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Electrochemical studies indicated presence of electrocatalysis owing to the synergistic effect of AgNDs and GO for sensing CWA HD via reductive dehalogenation. The AgNDs/APTES‐GO modified GC electrode exhibited linearity for CWA HD from 5.3 μM to 42.4 μM. Constant potential electrolysis was performed with modified electrode and degradation products were analysed using GC‐MS, highlighting the great potential of graphene based hybrid material. This new strategy provides an opportunity for the development of “detect and destroy” system for the CWAs and other environmental toxic pollutant, which could help in mitigation of on‐ site events for first responders.     

Determination of Explosives Using Electrochemically Reduced Graphene

A graphene‐based electrochemical sensing platform for sensitive determination of explosive nitroaromatic compounds (NACs) was constructed by means of electrochemical reduction of graphene oxide (GO) on a glassy carbon electrode (GCE). The electrochemically reduced graphene (ER‐GO) adhered strongly onto the GCE surface with a wrinkled morphology that showed a large active surface area. 2,4‐Dinitrotoluene (2,4‐DNT), as a model analyte, was detected by using stripping voltammetry, which gave a low detection limit of 42 nmol L⁻¹ (signal‐to‐noise ratio=3) and a wide linear range from 5.49×10⁻⁷ to 1.1×10⁻⁵ M . Further characterizations by electrochemistry, IR, and Raman spectra confirmed that the greatly improved electrochemical reduction signal of DNT on the ER‐GO‐modified GC electrode could be ascribed to the excellent electrocatalytic activity and high surface‐area‐to‐volume ratio of graphene, and the strong π–π stacking interactions between 2,4‐DNT and the graphene surface. Other explosive nitroaromatic compounds including 1,3‐dinitrobenzene (1,3‐DNB), 2,4,6‐trinitrotoluene (TNT), and 1,3,5‐trinitrobenzene (TNB) could also be detected on the ER‐GO‐modified GC electrode at the nM level. Experimental results showed that electrochemical reduction of GO on the GC electrode was a fast, simple, and controllable method for the construction of a graphene‐modified electrode for sensing NACs and other sensing applications.     

Differential Pulse Voltammetry Determination of Ofloxacin in Human Serum and Urine Based on a Novel Tryptophan‐graphene Oxide‐carbon Nanotube Electrochemical Sensor

The highly sensitive determination of ofloxacin (OFL) in human serum and urine was achieved on a novel tryptophan‐graphene oxide‐carbon nanotube (Trp‐GO‐CNT) composite modified glassy carbon electrode (Trp‐GO‐CNT/GCE). The Trp‐GO‐CNT composite was fabricated, and its morphologies and surface functional groups were characterized by field emission scanning electron microscopy (FE‐SEM) and Fourier transform infrared (FT‐IR) spectroscopy. The electrochemical properties of Trp‐GO‐CNT/GCE were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The superior electrochemical behaviors of Trp‐GO‐CNT/GCE toward OFL can be mainly assigned to the excellent electrocatalytic activity of Trp, the great conductivity and high surface area of GO and CNT, and the synergistic effect between Trp, GO and CNT. Under optimum conditions, a wide and valuable linear range (0.01–100 μM), a low detection limit (0.001 μM, S/N=3), a good linear relationship (R2>0.999), good stability and repeatability were obtained for the quantitative determination of OFL. Furthermore, the Trp‐GO‐CNT electrochemical sensor was successfully applied to the determination of OFL in human serum and urine samples, and satisfactory accuracy and recovery could be obtained.     

Photodynamic Therapy of Oligoethylene Glycol‐Dendronized Reduction‐Sensitive Porphyrins

Graphene oxide (GO ) and its functionalized derivatives have attracted increasing attention in medical treatment. Herein, a reduction sensitive PEI‐GO ‐SS ‐TPP was synthesized for photodynamic therapy. More than 80% porphyrin release was observed in the presence of 10 mmol•L⁻¹ DTT in one day. The confocal laser scanning microscopy confirmed that the cell uptake efficiency of PEI‐GO‐SS‐TPP was remarkably enhanced as compared to free porphyrin which was significantly dependent on incubation time. For photodynamic therapy, GSH‐OEt could effectively increase the photodynamic therapy efficiency of PEI‐GO ‐SS ‐TPP . Compared with free porphyrin, the toxicity from PEI‐GO ‐SS ‐TPP is much higher with a low IC₅₀ (2.1 µg/mL ) value. All results indicate that the PEI‐GO ‐SS ‐TPP PSs are promising for photodynamic therapy.     

聚吡咯/还原氧化石墨烯复合物的合成及电容性能

通过原位聚合方法制备不同配比的聚吡咯/氧化石墨（PPy/GO）复合物,将其用NaBH4还原得到聚吡咯/还原氧化石墨烯(PPy/RGO)复合物,采用X射线衍射、红外光谱和场发射扫描电子显微镜（FESEM）对其结构和形貌进行物理表征。 采用循环伏安、恒电流充放电和交流阻抗等电化学方法系统研究了所制备样品的电化学性能。 实验结果表明,在电流密度为0.5 A/g、吡咯（Py）与GO质量比为95∶5时,得到的复合物还原前后比电容分别可达401.5和314.5 F/g,远高于单纯的GO（34.8 F/g）和PPy（267.5 F/g）。 经过1200圈循环稳定性测试后,PPy/RGO复合物比电容保持了原来的62.5%,与PPy和PPy/GO（电容保持率分别为16.8%和46.4%）相比,PPy/RGO表现出更好的循环稳定性能,有望成为超级电容器电极材料。     

电化学还原氧化石墨烯用于四环素电催化检测

四环素(TTC)因其广泛的抗菌性和低生产成本等特点而成为应用最广泛的兽医药物. TTC的大量使用不可避免地导致其进入地表水、地下水和污水处理厂.迄今,已有许多方法用于TTC检测,包括免疫测定法、微生物检测法和化学-物理法等.然而,这些方法费用高,耗时长或需要复杂的样品预处理过程,不适合现场测量或常规分析.电化学分析法具有操作简单、成本低廉、选择性和灵敏度较高、易实现在线检测等特点,在检测领域具有重要优势.石墨烯在电化学传感器领域表现出优越的应用性能,但有关石墨烯材料应用于电分析和电催化方面的报道仍然有限.石墨烯的前驱体氧化石墨烯(GO)片层底面上具有各种类型的含氧官能团和层状边缘,导致其绝缘并具有很多缺陷,使GO包含了sp2和sp3杂化碳原子,为GO提供了独特的具有化学功能的异构电子结构.通过对GO进行还原,可以生成新的sp2域或者改变含氧官能团的数量和类型,从而为GO提供更多的特殊性质.研究表明,电化学还原是一种绿色快速的还原方法,可以控制GO的还原程度和还原过程.本文利用电化学还原法来调整GO表面的官能团和缺陷度,利用在–0.8 V还原电位下得到的电化学还原氧化石墨烯(ERGO-0.8V)修饰玻碳电极(GC)为工作电极(GC/ERGO-0.8V),采用循环伏安法对溶解在pH=3的缓冲溶液中的TTC进行电化学检测,发现ERGO-0.8V对TTC具有电催化性能.利用红外光谱(FT-IR)、X射线光电子能谱(XPS)和拉曼光谱对ERGO-0.8V, ERGO-1.2V, GO及化学还原得到的石墨烯(CRGO)表面官能团和缺陷程度进行了表征,考察了TTC在ERGO-0.8V/GC上的电化学行为,对其电催化还原机理进行了推测.结果表明,与GO, ERGO-1.2V及CRGO修饰电极相比, GC/ERGO-0.8V修饰电极的催化还原峰在0–0.5 V,对TTC表现出独特的电催化性能, GC/ERGO-0.8V电极对浓度为0.1–120 mg/L的TTC溶液具有良好的检测性能,在不同浓度范围内其氧化峰峰电流与峰电位的线性关系不同. FT-IR和XPS结果显示,在–0.8 V还原电位下得到的ERGO-0.8V,其官能团类型和数量发生变化,但仍存在大量官能团,主要是羧基、羟基和环氧基.同时,拉曼表征显示ERGO-0.8V的缺陷密度增大,同时新生成的sp2域减小而使得ERGO的sp2域减小.对比GO等其他材料的表征结果推测,官能团变化是影响ERGO独特电催化性质的主要因素,除此之外还有材料的缺陷度和sp2域.推测GC/ERGO-0.8V修饰电极对TTC可能的催化机理为： TTC在GC/ERGO电极上的还原与氢醌和醌之间的转换有关;而对于ERGO,则可能对应于羧基和羟基之间的转化.然而,同样具有羧基和羟基的ERGO-1.2V则对TTC没有产生电催化作用.其原因可能是在–0.8到–1.2 V还原电位下,形成的羧基位于石墨烯片层内部,而片层内的电子传递较慢.     

Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

4-Mercaptophenylboronic acid functionalized graphene oxide composites: Preparation,characterization and selective enrichment of glycopeptides

Selective enrichment and isolation of glycopeptides from complex biological samples was indispensable for mass spectrometry (MS)-based glycoproteomics, however, it remained a great challenge due to the low abundance of glycoproteins and the ion suppression of non-glycopeptides. In this work, 4-mercaptophenylboronic acid functionalized graphene oxide composites were synthesized via loading gold nanoparticles on polyethylenimine modified graphene oxide surface, followed by 4-mercaptophenylboronic acid immobilization by the formation of Au–S bonding (denoted as GO/PEI/Au/4-MPB composites). The composites showed highly specific and efficient capture of glycopeptides due to their excellent hydrophilicity and abundant boronic acid groups. The composites could selectively capture the glycopeptides from the mixture of glycopeptides and nonglycopeptides, even when the amounts of non-glycopeptides were 100 times more than glycopeptides. Compared with commercial meta-amino phenylboronic acid agarose, the composites showed better selectivity when the sample was decreased to 10 ng. These results clearly verified that the GO/PEI/Au/4-MPB composites might be a promising material for glycoproteomics analysis.     

Surface modification by graphene oxide:An efficient strategy to improve the performance of activated carbon based supercapacitors

An efficient and cost-effective strategy to modificate the surface of active carbon (AC), form a 3D-conductive network, and therefore improve the electrochemical performance of AC based supercapacitor was developed.     

Activated carbon/graphene composites with high-rate performance as electrode materials for electrochemical capacitors

Glucose-derived activated carbon (GAC)/reduced graphene oxide (RGO) composites are prepared by pre-carbonization of the precursors (aqueous mixture of glucose and graphene oxide) and KOH activation of the pyrolysis products. The effect of the mass ratio of graphene oxide (GO) in the precursor on the electrochemical performance of GAC/RGO composites as electrode materials for electrochemical capacitors is investigated. It is found that the thermally reduced graphene oxide sheets serves as a wrinkled carrier to support the activated carbon particles after activation. The pore size distribution and surface area are depended on the mass ratio of GO. Besides, the rate capability of GAC is improved by the introduction of GO in the precursor. The highest specific capacitance of 334 F g^?1 is achieved for the GAC/RGO composite prepared from the precursor with a GO mass ratio of 3 %.     

On Oxygen‐Containing Groups in Chemically Modified Graphenes

Reduced graphenes (belonging to the class of chemically modified graphenes, CMG) are one of the most investigated and utilized materials in current research. Oxygen functionalities on the CMG surfaces have dramatic influences on material properties. Interestingly, these functionalities are rarely comprehensively characterized. Herein, the four most commonly used CMGs, mainly electrochemically reduced graphene oxide (ER‐GO), thermally reduced graphene oxide (TR‐GO), and the corresponding starting materials, that is, graphene oxide and graphite oxide, were comprehensively characterized by a wide variety of methods, such as high‐resolution X‐ray photoelectron spectroscopy, electrochemical impedance spectroscopy, UV/Vis spectroscopy, transmission electron microscopy (TEM), and voltammetry, to establish connections between the structures of these materials that carry different oxygen functionalities and their electrochemical behaviors. This was followed by the quantification of the negatively charged oxygen‐containing groups (OCGs) by UV/Vis spectroscopy and of the electrochemically reducible OCGs by voltammetry. Lastly, a biofunctionalization with gold nanoparticle (AuNP)‐modified DNA sequences was performed by the formation of covalent bonds with the carboxylic groups (? COOH) on the CMG surfaces. There was an evident predominance of functionalizable ? COOH groups on the ER‐GO surface, as confirmed by a higher amount of Au detected both with differential‐pulse voltammetry and impedance spectroscopy, coupled with visualization by TEM. We exploited the DNA–Au bioconjugates as highly specific stains to localize and visualize the positions of carboxylic groups. Our findings are very important to clearly identify the presence, nature, and distribution of oxygen functionalities on different chemically modified graphenes.     

聚吡咯/氧化石墨烯层状复合材料的制备及其在超级电容器中的应用(英文)

通过将吡咯单体在低温下与氧化石墨烯进行原位聚合,获得聚吡咯/石墨烯(Ppy/CRGO)复合材料.采用场发射电子显微镜(FESEM)、红外(FT-IR)和热重分析(TGA)对复合物的表面形貌、结构进行表征.FESEM结果表明,通过控制氧化石墨烯(GO)和吡咯单体的质量比例,可以对复合物的层状和厚度进行调控.FT-IR和TGA结果表明,聚吡咯(Ppy)是通过化学键合的方式与氧化石墨烯复合在一起.通过机械冷压法将粉末状Ppy/CRGO复合物压成圆片电极,并探讨了石墨烯和聚吡咯复合比例、反应时间、烘干温度和孔隙率等因素对Ppy/CRGO复合物电极的电学和电化学性能的影响.结果表明,Ppy与CRGO质量比为10∶1所制得的Ppy/CRGO复合物的电容量为421 F·g-1,通过在电极中引入孔隙,电容量能进一步提升为509 F·g-1.     

Heightened Integration of POM‐based Metal–Organic Frameworks with Functionalized Single‐Walled Carbon Nanotubes for Superior Energy Storage

To increase the conductivity of polyoxometalate‐based metal–organic frameworks (POMOFs) and promote their applications in the field of energy storage, herein, a simple approach was employed to improve their overall electrochemical performances by introducing a functionalized single‐walled carbon nanotubes (SWNT‐COOH). A new POMOF compound, [Cu₁₈(trz)₁₂Cl₃(H₂O)₂][PW₁₂O₄₀] (CuPW), was successfully synthesized, then the size‐matched functionalized SWNT–COOH was introduced to fabricate CuPW/SWNT–COOH composite (PMNT–COOH) by employing a simple sonication‐driven periodic functionalization strategy. When the PMNT–COOH nanocomposite was used as the anode material for Lithium‐ion batteries (LIBs), PMNT–COOH( 3 ) (CuPWNC:SWNT‐COOH=3:1) showed superior behavior of energy storage, a high reversible capacity of 885 mA h g^?1 up to a cycle life of 170 cycles. The electrochemical results indicate that the uniform packing of SWNT–COOH provided a favored contact between the electrolyte and the electrode, resulting in enhanced specific capacity during lithium insertion/extraction process. This fabrication of PMNT–COOH nanocomposite opens new avenues for the design and synthesis of new generation electrode materials for LIBs.     

L-苏氨酸分子印迹传感器的制备及应用

采用电化学方法制备了纳米银/聚槲皮素修饰充蜡石墨电极(Ag/Qu/WGE)。以L-苏氨酸(L-Thr)为模板分子,将一定量的壳聚糖,L-Thr和Nafion的混合液涂布在Ag/Qu/WGE上,采用恒电位法电化学清洗除去模板分子L-Thr,得到基于壳聚糖/纳米银/聚槲皮素的L-Thr分子印迹复合膜修饰电极(TMIP/WGE)。采用场发射扫描电镜、红外光谱分析、X射线光电子能谱和电化学技术表征了TMIP/WGE的形成。TMIP/WGE对L-Thr具有良好的电催化氧化作用,可用于L-Thr的快速、灵敏检测,L-Thr的氧化峰电流(1.45 V)和其浓度在0.1~1.0μmol/L范围内呈良好的线性关系,检出限(3σ)为0.01μmol/L。该电极已成功用于苏氨酸发酵液中L-Thr的检测。     

Intercalation Study of Low‐Molecular‐Weight Hyperbranched Polyethyleneimine into Graphite Oxide

We report for the first time the intercalation of low‐molecular‐weight hyperbranched polyethyleneimine (PEI) into graphite oxide (GO) for the facile, bulk synthesis of novel graphene‐based hybrid (GO‐PEI) materials exhibiting tailored interlayer galleries. The size of the intercalant as well as the loading in GO were systematically investigated to determine their contribution to the basal spacing of the resulting materials. Powder X‐ray diffraction measurements demonstrated the generation of constrained hybrid systems along the c axis that exhibit considerably increased interlayer distances compared with the starting, pristine GO. The results of X‐ray photoelectron and FTIR studies are consistent with a “grafting‐to” process of the intercalated PEI with the oxygen functional groups present along the GO framework. Furthermore, it was found that a great number of the nitrogen‐containing groups in PEI still remain available within the newly formed, confined micro‐environment of intercalated GO galleries. The increased surface area of the GO‐PEI hybrids in conjunction with the remaining available active groups of intercalated PEI render the synthesised hybrids very attractive candidates as nanostructured adsorbents.     

An Electrochemical Sensing Platform for the Detection of Lead Ions Based on Dicarboxyl‐Calix[4]arene

A simple and highly sensitive electrochemical sensor COOH−C4 derived from dicarboxyl‐calix[4]arene modified on a screen printed gold electrode (Au) was developed for the determination of lead ions in water samples. A 3‐mercaptopropionic acid (MPA) monolayer was used as a template on the gold electrode for the surface modification with dicarboxyl‐calixarene. The modified electrodes were surface‐characterized using Fourier Transform infrared spectroscopy (FTIR). The data obtained proved the confirmation of each stage of the electrode modification. The electrochemical analyses of the COOH−C4 electrode showed an enhanced electrocatalytic activity and higher current towards Pb²⁺ ions as compared to the bare Au and MPA/Au electrodes. Under optimum conditions, the differential pulse voltammetry response of COOH−C4 displayed a wide linear response ranging from 280–2500 μg/L for Pb²⁺ with a detection limit of 6.2 μg/L. In addition, the fabricated electrode showed a high selectivity and stability towards the Pb²⁺ ions in presence of possible interfering species. The present method was successfully applied to determine Pb²⁺ ions in real samples with satisfactory precision, with a relative standard deviation of 3.12 % and an acceptable recovery of 92 %, which demonstrated the potential application of dicarboxyl‐calix[4]arene modified on electrodes for heavy‐metal sensing.     

A facile method to prepare graphene-coat cotton and its application for lithium battery

The free-standing and binder-free electrode materials, cotton/graphene (CGN) composites were prepared via a simple “dipping and freeze-drying” process using raw cotton as the supporting body (platform) and graphene oxide (GO) as the suspension. Then the cotton/GO (CGO) composites were annealed at 1000 °C under an Ar flow conditions to obtain CGN composites. The results show that the CGN structure can protect the cotton framework and have better thermal stable property than the cotton alone. Galvanostatic charge–discharge tests demonstrated that the GO concentration had great effects on their electrochemical performances. The CGN (for the GO with 3 and 5 mg ml^?1) provide reversible discharge capacity of 160 mAh g^?1 after 100 cycles, which is about 1.5 times higher than that of the cotton alone (115 mAh g^?1 after 100 cycles). Excellent electrochemical properties of CGN can be ascribed to its controllable structure with more lithium ion storage sites, high electronic conductivity, and fast ion diffusion velocity. The results suggest that this work develops a simple, cheap, and suitable large-scale production method in the lithium-ion batteries.     

In‐Situ covalent synthesis of gold nanorods on GO surface as ultrasensitive Raman probe

In this paper, using thiolated graphene oxide (GO‐O‐SH) as substrate, gold nanorods (AuNRs) covalently linked to the GO surface by in‐situ seed growth method were first reported. The as‐prepared composites were characterized by UV–vis spectrum, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT‐IR). Experimental results indicated that the introduction of short flexible organic chain between GO and AuNRs contributed to the homogenous synthesis of gold rods, and uniform gold nanorods with aspect ratio within 3~8 were covalently linked to the surface of GO with high stability and yield. The strategy represented an outstanding improvement in comparison to the traditional route for fabricating GO@AuNRs composites. Furthermore, based on coupling of the two nanomaterials, the composites could act as high sensitive Raman probe with limit of detection (LOD) reaching 1 × 10^?12 M.