Simultaneous enantioseparation of cyproconazole,bromuconazole, and diniconazole enantiomers by CD‐modified MEKC

An efficient method for the simultaneous enantioseparation of cyproconazole, bromuconazole, and diniconazole enantiomers was developed by CD‐modified MEKC using a dual mixture of neutral CDs as chiral selector. Three neutral CDs namely hydroxypropyl‐β‐CD, hydroxypropyl‐γ‐CD, and γ‐CD were tested as chiral selectors at different concentrations ranging from 10, 20, 30 and 40 mM, but enantiomers of the studied fungicides were not completely separated. The best dual chiral recognition mode for the simultaneous separation of cyproconazole, bromuconazole, and diniconazole enantiomers was achieved with a mixture of 27 mM hydroxypropyl‐β‐CD and 3 mM hydroxypropyl‐γ‐CD in 25 mM phosphate buffer (pH 3.0) containing 40 mM SDS to which methanol‐acetonitrile (10%:5% v/v) was added as organic modifiers. The best separation was based on the appearance of 10 peaks simultaneously, with good resolution (R_s 1.1–15.9), and peak efficiency (N>200 000). Good repeatabilities in the migration time, peak area, and peak height were obtained in terms of RSD ranging from (0.72 to 1.06)%, (0.39 to 3.49)%, and (1.90 to 4.84)%, respectively.     

Development of a novel dual CD‐MEKC system for the systematic flavonoid fingerprinting of Ligaria cuneifolia (R. et P.) Tiegh.—Loranthaceae—extracts

The present work deals with the development and validation of a novel dual CD‐MEKC system for the systematic flavonoid fingerprinting of Ligaria cuneifolia (R. et P.) Tiegh.—Loranthaceae—extracts. The BGE consisted of 20 mM pH 8.3 borate buffer, 50 mM SDS, a dual CD system based on the combination of 5 mM β‐CD and 2% w/v S‐β‐CD, and 10% v/v methanol. The proposed method has been successfully applied to the comparative analysis of extracts from aerial parts and different hosts, geographical areas, and extraction procedures in order to establish the flavonoid fingerprint of L. cuneifolia . The method was validated according to international guidelines. LOD and LOQ, intra and interday precision, and linearity were determined for catechin, epicatechin, procyanidin B2, rutin, quercetin‐3‐O‐glucoside, quercetin‐3‐O‐xyloside, quercetin‐3‐O‐rhamnoside, quercetin‐3‐O‐arabinofuranoside, quercetin‐3‐O‐arabinopyranoside, and quercetin. The CD‐MEKC methodology emerges as a suitable alternative to the traditional HPLC for quality control, fingerprinting, and standardization of L. cuneifolia extracts from different sources.     

Simultaneous determination of aliskiren and hydrochlorothiazide from their pharmaceutical preparations using a validated stability‐indicating MEKC method

A stability‐indicating MEKC method was developed and validated for the simultaneous determination of aliskiren (ALI) and hydrochlorothiazide (HCTZ) in pharmaceutical formulations using ranitidine as an internal standard (IS). Optimal conditions for the separation of ALI, HCTZ and its major impurity chlorothiazide (CTZ), IS and degradation products were investigated. The method employed 47 mM Tris buffer and 47 mM anionic detergent SDS solution at pH 10.2 as the background electrolyte. MEKC method was performed on a fused‐silica capillary (40 cm) at 28°C. Applied voltage was 26 kV (positive polarity) and photodiode array (PDA) detector was set at 217 nm. The method was validated in accordance with the ICH requirements. The method was linear over the concentration range of 5–100 and 60–1200 μg/mL for HCTZ and ALI, respectively (r²>0.9997). The stability‐indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using the PDA detection. Precision and accuracy evaluated by RSD were lower than 2%. The method proved to be robust by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of ALI and HCTZ both individually and in a combined dosage tablet formulation to support the quality control.     

Baseline separation of α and β‐acids homologues and isomers in hop (Humulus lupulus L.) by CD‐MEKC‐UV

An alternative method for simultaneous baseline separation of α and β‐acids homologues and isomers in hop by CD‐MEKC with UV detection was proposed. The optimized background electrolyte was composed of 30 mmol/L sodium tetraborate solution, 45 mmol/L sodium dodecyl sulfate, 20 mmol/L β‐cyclodextrin and 10% v/v acetonitrile. The instrumental conditions were evaluated by using a 3³ Box‐Benhken experimental design. In order to demonstrate the applicability of the method, 21 hop samples from different varieties were analyzed. The repeatability intra‐ and interday tests were performed and relative standard deviations lower than 7% for area and migration times were observed. The present method comprehended 8 min analysis time and revealed to be faster and more efficient when compared to previous reports from literature.     

Development and validation of a capillary electrophoresis method applied to the analysis of l‐citrulline in an oral formulation for pediatric use

A simple and highly sensitive CE–UV method was applied in the determination of l ‐ctrulline, which was developed from an oral formulation for pediatric use. The novel method was based on the analysis of l ‐citrulline for direct ultraviolet detection at 198 nm. The BGE consisted of 10 mM sodium tetraborate and 50 mM SDS at pH 9, and the electrophoretic parameters were optimized. The method was validated in terms of specificity, linearity, LOD, LOQ, precision, accuracy, and robustness. The LOD and LOQ obtained were 1.36 and 4.54 μg/mL, respectively. In addition, the method offers higher sensitivity and specificity compared with the results obtained from HPLC method using UV‐detectors, in which l‐ citrulline needs to be derivatizated. Furthermore, low cost and simplicity of the system allowed the rapid and simple quantitation of l‐ citrulline in the oral formulation for quality control and stability indicated method.     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Determination of lumiracoxib by a validated stability‐indicating MEKC method and identification of its degradation products by LC‐ESI‐MS studies

A stability‐indicating MEKC method was developed and validated for the analysis of lumiracoxib (LMC) in pharmaceutical formulations using nimesulide as the internal standard (IS). Optimal conditions for the separation of LMC and degradation products were investigated. The method employed 50 mM borate buffer and 50 mM anionic detergent SDS solution at pH 9.0. MEKC method was performed on a fused‐silica capillary (50 μm id; effective length, 40 cm) maintained at 30°C. The applied voltage was 20 kV and photodiode array (PDA) detector was set at 208 nm. The method was validated in accordance with the International Conference on Harmonisation requirements. The stability‐indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using PDA detection. The degradation products formed under stressed conditions were investigated by LC‐ESI‐MS and the two degraded products were identified. MEKC method was linear over the concentration range of 5–150 μg/mL (r²=0.9999) of LMC. The method was precise, accurate, with LOD and LOQ of 1.34 and 4.48 μg/mL, respectively. The robustness was proved by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of LMC in tablets to support the quality control.     

Synthesis,Biological Evaluation,and Crystallographic Studies of Extended Guanine‐Based (lin‐Benzoguanine) Inhibitors for tRNA‐Guanine Transglycosylase (TGT)

This paper describes the rational design, synthesis, and biological evaluation of a new generation of inhibitors of the bacterial enzyme tRNA‐guanine transglycosylase (TGT), which has been identified as a new target in the fight against bacillary dysentery (Shigellosis). The enzyme catalyzes the exchange of guanine in the anticodon wobble position of tRNA by the modified base preQ₁, a guanine derivative, according to a ping‐pong mechanism involving a covalent TGT‐tRNA intermediate (Fig. 2). Based on computer modeling (Fig. 3), lin‐benzoguanine (6‐aminoimidazol[4,5‐g]quinazolin‐8(7H)‐one ( 2 )) was selected as an extended central scaffold, to form up to seven in‐plane intermolecular H‐bonds with the protein while sandwiching between Tyr106 and Met260. Versatile synthetic protocols were developed for the synthesis of 2 , and derivatives with phenyl, benzyl, and 2‐phenylethyl side chains (i.e., 16, 17a , and 12a, 12b, 13, 17 , resp.) to reach into the lipophilic pocket lined by Val282, Val45, and Leu68 (Schemes 1–3). To account for the limited solubility of the new ligands and in consequence of a recently developed detailed understanding of the mechanism of TGT catalysis (Fig. 2), the enzyme kinetic assay was completely redesigned, providing competitive (K_ic) and uncompetitive (K_iu) inhibition constants with respect to tRNA binding by TGT. The modifications of the various parameters in the new assay are described in detail. Binding affinities of the new inhibitors were found to be in the single‐digit micromolar range (K_ic values, Fig. 8). Decoration of the lin‐benzoguanine scaffold with lipophilic residues only gave a modest improvement in biological activity which was explained on structural grounds with the help of four crystal structures (Fig. 10) obtained by soaking the protein with inhibitors 2 and 12a – 12c . Both biochemical and biostructural analyses reported in this paper provide a fertile basis for the development of more potent future generations of TGT inhibitors.     

Reactive modifications of some chain‐ and step‐growth polymers with phosphorus‐containing compounds: effects on flame retardance—a review

This article reviews the recent developments in the synthetic strategies to chemically modify several chain‐growth polymers that were primarily developed in our laboratories, with a view to improve their flame retardance. In addition, it also incorporates the corresponding methodologies for the step‐growth thermoplastics and thermoset materials. For chain‐growth polymers, this involves primarily copolymerization reactions, under radical initiation, of acrylic or styrenic monomers with phosphorus‐containing comonomers, or optionally, by post‐modification reactions on preformed olefinic polymeric substrates with appropriate phosphorus‐containing reagents. In the case of step‐growth polymers, generally, an appropriate phosphorus‐bearing moiety is employed, as one of the reactive components, during the step‐growth synthetic process. The relative predominance of vapor‐ and condensed‐phase mechanisms of flame retardance in the modified systems was evaluated through a combination of various analytical techniques. It was found that incorporation of phosphorus, through chemical modification reactions, on to the various thermoplastics resulted in substantial increases in the flame retardation. Furthermore, mechanistic aspects of flame retardation revealed both vapor‐phase and condensed‐phase elements depending on the chemical nature of the parent polymer in question and to a lesser extent on the chemical environment of the phosphorus‐bearing moiety. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and curing of amino‐containing benzoxazine as a novel hardener for diglycidyl ether of bisphenol‐A

Benzoxazines containing various additional functional groups have been extensively reported to improve the properties of polybenzoxazines. In this work, a novel amino‐containing benzoxazine (PDETDA‐NH₂) was conveniently synthesized from diethyltoluenediamine (DETDA), 2‐hydroxybenzaldehyde, and paraformaldehyde and was used as a hardener for diglycidyl ether of bisphenol‐A (DGEBA). The curing behaviors of PDETDA‐NH₂ and PDETDA‐NH₂/DGEBA systems were studied by DSC, FT‐IR, and ¹H NMR. When curing, PDETDA‐NH₂ was firstly polymerized to N,O‐acetal‐type polymer and then rearranged to Mannich‐type polymer at elevated temperature, while the addition reaction between amino and benzoxazine was discouraged because of the steric hindrance of alkyl substituents. During PDETDA‐NH₂/DGEBA curing, it was found that the reactions happened in the order of addition polymerization of amino and epoxide, ring‐opening polymerization of benzoxazine, etherification between phenolic hydroxyl of the polymerized benzoxazine, and epoxide. Compared with DETDA cured DGEBA, PDETDA‐NH₂ cured DGEBA showed higher modulus, higher char yield, and much lower water uptake.     

Microwave‐assisted synthesis of a novel phosphorus‐containing spiroorthoester,characterization and cationic polymerization

A new phosphorus‐containing spiroorthoester, (1,4,6‐trioxaspiro [4,4] nonan‐2‐yl)‐methyl 3‐[10‐(9,10‐dihydro‐9‐oxa‐9‐phosphaphenanthrene‐10‐oxide)]‐propanoate (SOE‐P), was synthesized under microwave irradiation with a short reaction time (1 h), because classical thermal heating did not lead to the desired product. The structure of the new monomer was confirmed by ¹H, ¹³C, and ³¹P. SOE‐P was homopolymerized and copolymerized with phenylglycidyl ether with ytterbium triflate as a cationic initiator in DSC experiments. These reactions were monitored by FTIR/ATR, and the formation of poly(ether‐ester)s with a pendant bulky phosphorylated group was shown. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4722–4730, 2006     

Synthesis and properties of fluorine‐containing polyethers with pendant hydroxyl groups by the polyaddition of bis(epoxide)s with diols

Fluorine‐containing polyethers with pendant hydroxyl groups were synthesized by the polyaddition of fluorine‐containing bis(epoxide)s with certain fluorine‐containing diols with quaternary onium salts as catalysts. When the polyaddition was performed with 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol diglycidiyl ether and 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol, the corresponding polyether with pendant hydroxyl groups was successfully obtained in good yield. The polyaddition of certain fluorine‐containing bis(epoxide)s with diols also proceeded in bulk to provide the corresponding fluorine‐containing polyethers with high molecular weights. These polyethers were highly transparent at 157 nm for 0.1 μm thickness, with their transmittance of 14–75% at 157 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2543–2550, 2004     

Synthesis and characterization of a narrow‐bandgap polymer containing alternating cyclopentadithiophene and diketo‐pyrrolo‐pyrrole units for solar cell applications

We have synthesized a narrow‐bandgap conjugated polymer ( PCTDPP ) containing alternating cyclopentadithiophene (CT) and diketo‐pyrrolo‐pyrrole (DPP) units by Suzuki coupling. This PCTDPP exhibits a low band gap of 1.31 eV and a broad absorption band from 350 to 1000 nm, which allows it to absorb more available photons from sunlight. A bulk heterojunction polymer solar cell incorporating PCTDPP and C₇₀ at a blend ratio of 1:3 exhibited a high short‐circuit current of 10.87 mA/cm² and a power conversion efficiency of 2.27%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1669–1675, 2010     

A straightforward strategy for the efficient synthesis of acrylate and phosphine oxide‐containing vegetable oils and their crosslinked materials

Phosphorus‐containing triglycerides were prepared from a new route that involves the singlet oxygen photo‐oxygenation of high oleic sunflower oil and further reduction of the resulting hydroperoxide derivatives to a mixture of secondary allylic alcohols. These allylic alcohols in presence of chlorodiphenylphosphine give allylic phosphinites capable to undergo a [2,3]‐sigmatropic rearrangement leading to tertiary phosphine oxides directly linked to triglyceride in a one‐pot two‐step reaction. The obtained phosphorus‐containing triglycerides with different hydroxyl content were activated to polymerization by acrylation and these acrylate triglycerides were radically crosslinked in presence of different amounts of pentaerythritol tetra‐acrylate. The thermal, dynamic‐mechanical, and flame retardancy properties of the final materials were evaluated. Thermal and thermo‐oxidative degradation was studied by gas chromatography/mass spectrometry, ³¹P HR‐MAS NMR spectroscopy, and scanning electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4051–4063, 2009     

Microchip CE‐LIF method for the hydrolysis of L‐glutamine by using L‐asparaginase enzyme reactor based on gold nanoparticle

l ‐Asparaginase (l ‐Asnase) can suppress the growth of malignant cells by rapid depletion of two essential amino acids, l ‐glutamine (l ‐Gln) and l ‐asparagine (l ‐Asn). To study the cytotoxic effect and the secondary complications of l ‐Asnase in the treatment of acute lymphoblastic leukemia, the development of a novel enzyme reactor of l ‐Asnase for the hydrolysis of l ‐Gln, employing the enzyme‐gold nanoparticle conjugates in capillary, was reported in this work. First, a microchip CE (MCE)‐LIF was established for the separation of l ‐amino acids (l ‐Gln and l ‐glutamic acid) and studying the hydrolysis of l ‐Gln by using l ‐Asnase enzyme reactor. Then, using l ‐Gln as target analyte, the enzyme kinetics of l ‐Asnase in free solution, enzyme‐gold nanoparticle conjugates (E‐GNP), and the enzyme‐gold nanoparticle conjugates immobilized in capillary (E‐GNP‐C) were investigated in detail with the proposed MCE‐LIF method. Moreover, for optimizing the enzymatic reaction efficiency, three important parameters, including the length of capillary, the enzyme concentration reacted with gold nanoparticle and the amount of l ‐Asnase immobilized on the gold nanoparticle, have been studied. Owing to the high specific activity, the E‐GNP‐C enzyme reactor exhibited the best performance for the hydrolysis of l ‐Gln.     

Highly efficient,catalyst‐free,one‐pot,pseudo five‐component synthesis of novel pyrazoline‐containing Schiff bases,metal complexes formation and computational studies via DFT method

In this study, a green and high yielding synthesis of novel pyrazoline‐containing Schiff bases via a one‐pot pseudo five‐component condensation reaction under catalyst‐free conditions in EtOH at room temperature is described. Initially, the reaction of 1,1‐bis(methylthio)‐2‐nitroethylene (BMTNE), with NH₂NH₂.H₂O is used for situ preparation of 1,1‐dihydrazino‐2‐nitroethylene (DHNE). Then, wide varieties of aldehydes are added to the mixture to afford the desired products good to excellent yields. This synthetic route is presented with several unique merits such as simplicity in operation and workup, readily presented starting materials, and high functional group tolerance. Additionally, the stoichiometric complex formation of these Schiff bases as ligand (L) with various metal ions [Mn(OAc)₂, Cu(OAc)₂ and Zn(OAc)₂] in general molecular formula [ML] is examined via Job's method. Subsequently, theoretical analysis of the product is accomplished using density functional theory (DFT) calculations. According to the frontier molecular orbital (FMO) analysis, it is found that the aryl group linked to the imine bond contributes as an electron donor in the ligand–metal complex.     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

Facile preparation of boronic acid‐functionalized magnetic nanoparticles with a high capacity and their use in the enrichment of cis‐diol‐containing compounds from plasma

The use of bronate affinity adsorbents is a new separation method that appeared recently with great potential for specific extraction of cis‐diol‐containing compounds. In this work,a new strategy for the facile construction of boronic acid‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@FPBA MNPs) with a high capacity was described. The extraction capacity of the Fe₃O₄@FPBA MNPs was determined to be 66.0 ± 2.7 µmol/g for catechol and 80.6 ± 2.0 µmol/g for dopamine, being higher than that for the reported methods. The Fe₃O₄@FPBA MNPs were used to extract four cis‐diol drugs: caffeic acid isopropyl ester, caffic acid bornyl ester, isopropyl 3‐(3,4‐dihydroxyphenyl)‐2‐hydroxypropanoate and 3‐(3, 4‐dihydroxyphenyl)‐2‐hydroxylpropionic acid – from the spiked rabbit plasma, and the recoveries of four drugs were between 87.29 and104.37% with relative standard deviations ranging from 1.34 to 8.81%. Under the most favorable conditions, the solid‐phase extraction combined with HPLC‐UV for the analysis of four drugs in plasma could eliminate interferences from endogenous components of the biological fluids and exhibited sufficient precision and accuracy. These results showed that the prepared Fe₃O₄@FPBA MNPs were qualified for efficiently enriching and determining the trace cis‐diol substances from biological samples. Copyright © 2014 John Wiley & Sons, Ltd.     

UPLC‐MS/MS method for the determination of tobacco‐specific biomarker NNAL,tamoxifen and its main metabolites in rat plasma

Cigarette smoke is known to interact with tamoxifen‐metabolizing enzymes and transporters and potentially affect its treatment outcome. 4‐(N‐ nitrosomethylamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL) is an important metabolite of 4‐(methylnitro‐samino)‐1‐(3‐pyridyl)‐1‐butanone (NNK) because it is frequently used as a biomarker to assess human smoke exposure. In order to study the potential pharmacokinetic interaction between cigarette smoke and tamoxifen in rats a UPLC‐MS/MS method for the simultaneous determination of NNAL and tamoxifen along with its metabolites in rat plasma has been developed and validated. Analytes were extracted with methanol and separated on a HSS T3 column by a gradient elution with the mobile phase consisting of acetonitrile and water. The lower limits of quantitation ranged from 0.05 to 0.62 ng/mL. Precisions showed RSD <15.8% and accuracy in the range 80.6–116.0%. Mean analyte recoveries ranged from 76.9 to 108.4%. The method was successfully applied to study the effects of cigarette smoke condensate (CSC), NNK and benzo(a)pyrene pre‐treatment on the pharmacokinetics of tamoxifen and its metabolites in rats. Significant effects of CSC, NNK, benzo(a)pyrene were observed on pharmacokinetics of tamoxifen and its metabolites. We also found that plasma NNAL levels are statistically significant correlated with plasma 4‐hydroxy‐tamoxifen and endoxifen.