Ungewöhnliche Koordinationspolyeder um Sauerstoff in Li4Cl(OH)3

Unusual Coordination Polyhedra around Oxygen in Li₄Cl(OH)₃ The pseudobinary system LiOH/LiCl was investigated by X-ray methods. Two compounds, Li₄Cl(OH)₃ and Li₂Cl(OH), were obtained. The crystal structure of Li₄Cl(OH)₃ solved by single-crystal methods is delt with. For Li₂Cl(OH) powder diffraction data are given: Li₄Cl(OH)₃: P2₁/m, Z = 2, a = 5.4096(8) Å, b = 7.382(2) Å, c = 6.2076(8) Å, β = 94.40(1)°, Z(F_o) with (F_o)² ≧ 3σ(F_o)² = 483, Z (parameter) = 50, R/R_w = 0.022/0.025 Li₂Cl(OH): Pmma, Z = 2, a = 7.680(8) Å, b = 4.001(7) Å, c = 3.899(6) Å The hydroxide rich compound crystallizes in a new type of structure which contains puckered layers [Li₄(OH)₃⁺] connected via chloride ions.     

球型Ni(OH)2表面包覆Y(OH)3及其高温充放电性能

应用共沉淀的方法在球型Ni(OH)₂的表面包覆了一层Y(OH)₃,并研究了包覆不同含钇量后的球型Ni(OH)₂的高温充放电性能。研究结果表明:包覆Y(OH)₃的球型Ni(OH)₂具有良好的高温充放电性能。其中1C充放电条件下,包覆量为0.3%的Ni(OH)₂较好,0.2C充放电条件下,包覆量为1%的Ni(OH)₂较好。     

Li2I(OH): Eine Verbindung mit eindimensional unendlich kantenverknüpften [Li4/2(OH)]+-Pyramiden

Li₂I(OH): A Compound with Onedimensional Infinite Edge Sharing [Li_4/2(OH)⁺] Pyramids The pseudobinary system LiOH/LiI was investigated by X-ray methods. Two compounds, Li₂I(OH) and Li₅I(OH)₄ exist. The structure of Li₂I(OH) was solved by single-crystal data. For Li₅I(OH)₄ lattice constants and space group symmetry are given: Li₂I(OH): Pnma, Z = 4, a = 10.339(4) Å, b = 5.567(1) Å, c = 6.643(2) Å, Z(F_o) mit (F_o)² ≧ 3σ(F_o)² = 439, Z (parameter) = 23, R/R_w = 0.030/0.040 Li₅I(OH)₄: Pmmn or P2₁mn(= Pmn2₁), Z = 2, a = 10.42 Å, b = 5.30 Å, c = 5.81 Å Li₂I(OH) crystallizes in a new type of structure. The motif of a distorted hexagonal close-packed arrangement of iodide ions is penetrated by chains of [Li_4/2(OH)⁺].     

Bisphosphoric modified amino functional [xFe3O4–2xAl(OH)3]/waterborne polyurethane nanocomposite with superparamagnetism and flame retardancy

Based on the strong adsorption of the diphosphate group to Fe and Al ions, first, the Fe₃O₄ and Al (OH)₃ nanoparticles were modified by alendronate sodium (ALN), and organic phosphorus coated nanoparticles (Fe₃O₄‐ALN and Al (OH)₃‐ALN) with the active group ─NH₂ were prepared. Novel [xFe₃O₄–2xAl(OH)₃]/waterborne polyurethane nanocomposite with superparamagnetism and excellent flame retardancy were prepared by in situ polymerization. The experimental results showed that when the content of Fe₃O₄‐ALN increased, the M_s increased. And the saturation magnetization reached 14.35 emu/g when the Fe₃O₄‐ALN content was 10 wt%. The nanoparticle network formed by Fe₃O₄ and Al (OH)₃ can prevent the melting deformation of waterborne polyurethane (WPU) composite film and reduce the burning area. And the dual physical protective layer formed by nanoparticle network and char layer can prevent the combustible gas contacting with oxygen and giving off combustion heat, which effectively reduced the heat and smoke gas release. When the content of xFe₃O₄–2xAl(OH)₃ was 20 wt%, the oxygen index of the composite was 28.4%, and the flame retardancy of nanocomposite was classified as V‐0 rating in the UL‐94 test.     

Crystal structure of synthetic Cu3SeO4(OH)4

Summary The crystal structure of synthetic Cu₃SeO₄(OH)₄ was determined by single crystal X-ray methods:a=8.382 (2) Å,b=6.087 (1) Å,c=12.285 (2) Å,V=626.8 ų,Z=4, space group Pnma,R=0.026,R _w =0.021 for 1255 independent reflections (sin / 0.8 Å^–1). The crystal structure is isotypic to that of the mineral antlerite, Cu₃SO₄(OH)₄. The copper atoms are Jahn-Teller distorted with Cu^[4+2]O₆ polyhedra forming triple chains along [010]. These chains are linked via SeO₄ tetrahedra and weak hydrogen bonds to a framework structure.

---

Die Kristallstruktur von synthetischem Cu₃SeO₄(OH)₄

Zusammenfassung Die Kristallstruktur von synthetischem Cu₃SeO₄(OH)₄ wurde mittels Einkristall-Röntgenmethoden ermittelt:a=8.382 (2) Å,b=6.087 (1) Å,c=12.285 (2) Å,V=626.8 ų,Z=4, Raumgruppe Pnma,R=0.026,R _w =0.021 für 1255 unabhängige Reflexe (sin / 0.8 Å^–1). Die Kristallstruktur ist isotyp mit der des Minerals Antlerit, Cu₃SO₄(OH)₄. Die Kupferatome sind Jahn-Teller-verzerrt, die Cu^[4+2]O₆ Polyeder bilden Dreierketten entlang [010]. Diese Ketten sind über SeO₄-Tetraeder und schwache Wasserstoffbrücken zu einer Gerüststruktur verbunden.

     

Facile Synthesis and Catalytic Properties of β-Co（OH）2 and Mg（OH）2 Nanoplates

β-Co(OH)2 and Mg(OH)2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction(SAED),and gas chromatograph.     

Nonanatrium-bis(hexahydroxoaluminat)-trihydroxid-hexahydrat (Na9[Al(OH)6]2(OH)3 · 6H2O) – Kristallstruktur,NMR-Spektroskopie und thermisches Verhalten

Nonasodium Bis(hexahydroxoaluminate) Trihydroxide Hexahydrate (Na₉[Al(OH)₆]₂(OH)₃ · 6H₂O) – Crystal Structure, NMR Spectroscopy and Thermal Behaviour The crystal structure of the nonasodium bis(hexahydroxoaluminate) trihydroxide hexahydrate Na₉[Al(OH)₆]₂(OH)₃ · 6H₂O (4.5 Na₂O Al₂O₃ · 13.5 H₂O) (up to now described as 3 Na₂O · Al₂O₃ · 6H₂O, 4Na₂O · Al₂O₃ · 13 H₂O and [3 Na₂O · Al₂O₃ · 6H₂O] [xNaOH · yH₂O], respectively) was solved. The X-ray single crystal diffraction analysis (triclinic, space group P1 , a = 8.694(1) Å, b = 11.344(2) Å, c = 11.636(3) Å, α = 74.29(2)°, β = 87.43(2)°, γ = 70.66(2)°, Z = 2) results in a structure, consisting of monomeric [Al(OH)₆]^3? aluminate anions, which are connected by NaO₆ octahedra groups. Furthermore the structure contains both, two hydroxide anions only surrounded by water of crystallization and OH groups of [Al(OH)₆]^3? aluminate anions and a hydroxide anion involved in three NaO₆ coordination octahedra directly and moreover connected with a water molecule by hydrogen bonding. The results of ²⁷Al and ²³Na-MAS-NMR investigations, the thermal behaviour of the compound and possible relations between the crystal structure and the conditions of coordination in the corresponding sodium aluminate solution are discussed as well.     

La(OH)3负载锌铝水滑石的制备及其应用在锌镍二次电池中的性能

采用共沉淀法将氢氧化镧(La(OH)₃)负载在锌铝水滑石(Zn-Al LDHs)的表面,扫描电镜(SEM)、X射线衍射(XRD)表明La(OH)₃成功负载在锌铝水滑石表面,并且负载后的锌铝水滑石仍然为六边形片状晶体,且粒径均匀、分散性好。La(OH)₃质量其具有较好的可逆性、更大的正腐蚀电位及较小的电池内阻。5%La(OH)₃@Zn-Al LDHs在经过80次循环后,其循环保持率为94.84%。     

Zur Kenntnis des Natrium-tetrahydroxoaluminat-chlorids Na2[Al(OH)4]Cl

On the Sodium Tetrahydroxoaluminate Chloride Na₂[Al(OH)₄]Cl The hitherto unknown compound Na₂[Al(OH)₄]Cl was prepared by crystallisation from a NaCl containing sodium aluminate solution. According to the X-ray single crystal investigation (tetragonal, space group P4/nmm, a = 7.541 Å, c = 5.059 Å, Z = 2) the compound represents the first example of a crystalline hydroxoaluminate with monomeric [Al(OH)₄]^? anions. Cl^? shows a quadratic anti prismatic coordination to 4 Na⁺ and over hydrogen bonds to 4 O^2? while Na⁺ is octahedrally coordinated by 4 O^2? and 2 Cl^? (axial). The results of the crystal structure analysis are confirmed by ²⁷Al and ²³Na MAS NMR investigations. Na₂[Al(OH)₄]Cl decomposes at about 200°C without intermediates under formation of β-NaAlO₂ and NaCl.     

Synthesis of Amines by Reduction of Imines with the MCl2/NaBH4 (M = Co,Ni) System

A simple method for the synthesis of amines by the reduction of imines, anils and enamines, including some chiral substrates, with the MCl₂/NaBH₄/CH₃OH reagent (M = Co, Ni) in 64–82% yields is described.     

NaBH4/Ac2O/DOWEX(R)50WX4: A Convenient System for Fast Preparation of gem‐Diacetates from Aldehydes

Reductive‐acylalation of aldehydes has been carried out by NaBH₄/Ac₂O/DOWEX(R)50WX4 system. A variety of aldehydes (1 mmol) have been reacted with Ac₂O (0.5 mL) and NaBH₄ (1 mmol) in the presence of DOWEX(R)50WX4 (0.5 g) for the preparation of their corresponding acylals within 1 min at room temperature with excellent yields of the products (90‐95%). Ketones do not react with this system.     

Hydrogen Peroxide Sensor Based on Carbon Nanotubes/β‐Ni(OH)2 Nanocomposites

Ni(OH)₂ nanoflowers were synthesized by a simple and energy‐efficient wet chemistry method. The product was characterized by scanning electron microscopy (SEM) and X‐ray powder diffraction (XRD). Then Ni(OH)₂ nanoflowers attached multi‐walled carbon nanotubes (MWCNTs) modified glassy carbon electrodes (GCE) were proposed (MWCNTs/Ni(OH)₂/GCE) to use as electrochemical sensor to detect hydrogen peroxide. The results showed that the synergistic effect was obtained on the MWCNTs/Ni(OH)₂/GCE whose sensitivity was better than that of Ni(OH)₂/GCE. The linear range is from 0.2 to 22 mmol/L, the detection limit is 0.066 mmol/L, and the response time is <5 s. Satisfyingly, the MWCNTs/Ni(OH)₂/GCE was not only successfully employed to eliminate the interferences from uric acid (UA), acid ascorbic (AA), dopamine (DA), glucose (GO) but also NO₂^? during the detection. The MWCNTs/Ni(OH)₂/GCE allows highly sensitive, excellently selective and fast amperometric sensing of hydrogen peroxide and thus is promising for the future development of hydrogen peroxide sensors.     

Preparation and Application of La(OH)3 Nanoparticles Self‐Assembled Film Modified Electrode

Abstract

La(OH)₃ nanoparticles were successfully prepared with the sol‐gel method, and the preparation of a glassy carbon electrode modified by La(OH)₃ nanoparticles was investigated. The modified electrode shows an excellent electrocatalytic activity for hydroquinone. The anodic and cathodic overpotentials are reduced by ca. 143 mV and 83 mV, respectively, compared with those obtained with a bare glassy carbon electrode. According to the electrochemistry response, we set up a new method to determinate hydroquinone. The catalytic anodic current response of differential pulse voltammogram increases linearly with hydroquinone concentrations from 2.7×10^?7 to 6.5×10^?4 mol L^?1 with a detection limit of 6.0×10^?8 mol L^?1. The recovery of hydroquinone in a simulative sample is satisfactory, especially for its elimination of the interference of 1,2‐benzenediol (pyrocatechol) and 1,3‐benzenediol (m‐dihydroxybenzene). The method is simple, quick, and sensitive.     

Die Kristallstrukturen der Hydroxyhalogenide Li4(OH)3Br und Li4(OH)3I

The Crystal Structures of the Lithium Hydroxide Halides Li₄(OH)₃Br and Li₄(OH)₃I Using single crystal analysis and powder diffraction data the crystal structures of the lithium hydroxide halides Li₄(OH)₃Br and Li₄(OH)₃I were solved and refined. Li₄(OH)₃Br crystallises in the space group P2₁/m and is isotypic with the lighter homologue Li₄(OH)₃Cl. (Rietveld‐refinement; T = 293 K; a = 545, 41(1); b = 758, 13(1); c = 650, 20(1) pm; β = 93, 82(1)°; Z = 2; 300 unique reflections; R_p = 0, 106; R_wp = 0, 109; R_exp = 0, 081). Li₄(OH)₃I crystallises in the space group Pmmn in a variant of the LiOH structure in which 1/4 of the hydroxide anions are replaced by iodide anions. (Single crystal analysis; T = 100 K; a = 1029, 5(4); b = 525, 9(2); c = 573, 2(2) pm; Z = 2; 392 unique reflections; R₁ = 0, 0642).     

Synthesis of Mono-Dispersed Mg(OH)2 Nanoflakelets

Mono-dispersed Mg(OH)₂ nanoflakelets have been prepared with the assistant of 4-(p-nitrophenylazo)resorcinol. The samples were characterized using XRD, TEM, and ED. Electron diffraction analysis showed that single crystalline nanoflakelets were obtained in hydrothermal process, and porous Mg(OH)₂ nanosheets were prepared at lower temperature. Nitrogen adsorption isotherms show that the surface area of Mg(OH)₂ nanosheets is 129 m²/g. Possible growth mechanism of the nanoflakelets is discussed.     

3D nanostructured Ni(OH)2 microspheres as an efficient immobilization matrix of Ru(bpy)3 for high-performance electrochemiluminescence sensor

The electrochemistry and electrochemiluminescence (ECL) of novel three-dimensional nanostructured Ru(bpy)₃²⁺/Ni(OH)₂ microspheres were investigated for the first time. The negatively charged porous Ni(OH)₂ microspheres composed of Ni(OH)₂ nanowires were specifically designed to interact with Ru(bpy)₃²⁺. The large surface area and porous structure of Ni(OH)₂ microspheres enhance loading of Ru(bpy)₃²⁺ and mass transport of the model analyte, tripropylamine (TPA). Excellent ECL performance of the presented sensor was achieved including good stability and wide linear range from 7.7 × 10⁻¹⁰ to 3.8 × 10⁻³ M with the detection limit of 2.6 × 10⁻¹⁰ M to TPA.     

Spontaneous Growth of 3D Silver Mesoflowers on Poly(4-vinylpyridine) Brushes-Grafted-Graphene Oxide Films and Facile Creation of Nanoporosities over their Surface

Fabricating three-dimensional (3D) hierarchical noble-metal particles by spontaneous redox reactions between graphene and noble-metal salts still remains a great challenge. Herein, the fact that graphene oxide (GO) itself acts as both a platform for grafting polymer brushes and a reducing agent to reduce [Ag(NH₃)₂]⁺ ions is taken advantages of. 3D flower-like Ag mesoparticles (Ag mesoflowers, Ag MFs) with tunable size and shapes can spontaneous grow on poly(4-vinylpyridine) brushes-grafted-graphene oxide (P4VP-g-GO) films in Ag(NH₃)₂OH solution without the use of any additional reducing agent. The residual Ag(NH₃)₂OH on 3D Ag MFs surface can be further reduced by NaBH₄, causing abundant nanoporosities over the entire Ag MFs. The resulting Ag nanoporous MFs (Ag NMFs) with larger surface-to-volume ratio and higher nanoscale roughness exhibit ultrasensitivity in surface-enhanced Raman spectroscopy (SERS) detection, and the detection limit for 4-aminothiophenol is as low as 10⁻¹³ m .     

Structurally Stable Ni(OH)2 Composite with Super Long-term Cycling Life for Aqueous High-performance Supercapacitor

We synthesized an electrochemical structurally stable composite electrode, containing Ni-doped Co(CO₃)_0.5OH ⋅ 0.11H₂O nanoneedles and nanoflake-/nanofrustum-like Ni(OH)₂ with highly hydrophilic group, leading to enhanced rare performance. The electrode exhibits an outstanding ultra-long cycle life of more than 140,000 cycles. Specially, the assembled aqueous hybrid supercapacitor presents more than 80 % capacity retention even after 170,000 cycles and high energy density of 44.5 Wh kg⁻¹. This work highlights a feasible strategy to design and develop high-efficiency electrodes via engineering on composition and nanostructure.     

Theoretical study on the reaction of (Z)‐CF3CHCHCF3 with OH radicals

The mechanism on the OH‐initiated atmospheric oxidation reaction of (Z)‐CF₃CH?CHCF₃ with and without O₂/NO has been investigated theoretically. The electronic structure information of the potential energy surface was obtained at the M06‐2X/aug‐cc‐pVDZ level, and the single‐point energies were refined by MCG3/3 method. The calculations show that the (Z)‐CF₃CH?CHCF₃ + OH reaction occurs via addition‐elimination mechanism, leading to products CF₃ and CF₃CH?CH(OH), rather than H‐abstraction mechanism at low temperature. Under atmospheric condition, the OH‐addition intermediate is likely to react rapidly with O₂/NO, and the likely products are CF₃C(O)H, CF₂(O), CF₃CH(OH)CH(O), FNO, and HO₂, as is proposed by experiment. © 2013 Wiley Periodicals, Inc.     

Reductive amination of carbohydrates using NaBH(OAc)<Subscript>3</Subscript>

An improved protocol for reductive amination of carbohydrates is developed. This derivatization facilitates the detection of oligosaccharides in HPLC-UV and mass spectrometric applications by enhancing the signal of the carbohydrates. In this study, reductive amination was achieved using NaBH(OAc)₃.This reducing agent is an attractive alternative to the toxic, but extensively used reducing agent, NaBH₃CN. Several types of carbohydrates were successfully derivatized using NaBH(OAc)₃, and the results obtained from this protocol were compared with those obtained with NaBH₃CN. Both reducing agents were equally effective in side-by-side analysis. Two purification strategies (purification by zip-tip and HPLC) were implemented and the instrumental limit of detection of each method was compared. The detection limit was ~1,000 times lower when the purification was done using HPLC, compared to using the zip-tip. Since the derivatization by-products in this protocol are not toxic, MS analysis also could also be performed directly, without purification. The MS/MS data of derivatized and underivatized oligosaccharides were acquired as well. The derivatized oligosaccharides produce more easily interpretable product ions than underivatized oligosaccharides.