Simultaneous quantification of catecholamines in rat brain by high‐performance liquid chromatography with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence detection

A new method based on high‐performance liquid chromatography (HPLC) coupled with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence (CL) detection was developed for the simultaneous quantitation of catecholamines in rat brain. In the present CL system, gold nanoparticles were produced by the on‐line reaction of H₂O₂, NaHCO₃?Na₂CO₃ (buffer solution of luminol) and HAuCl_4. Norepinephrine (NE), epinephrine (EP) and dopamine (DA) could strongly enhance the CL signal of the on‐line gold nanoparticle‐catalyzed luminol system. The UV?visible absorption spectra and transmission electron microscopy studies were carried out, and the CL enhancement mechanism was proposed. Catecholamines promoted the on‐line formation of more gold nanoparticles, which better catalyzed the luminol–H₂O₂ CL reaction. The good separation of NE, EP and DA was achieved with isocratic elution using a mixture of methanol and 0.2% aqueous phosphoric acid (5:95, v/v) within 8.5 min. Under the optimized conditions, the detection limits, defined as a signal‐to‐noise ratio of 3, were in the range of 1.32–1.90 ng/mL, corresponding to 26.4?38.0 pg for 20 μL sample injection. The recoveries of catecholamines added to rat brain sample were >94.6%, with the precisions <5.5%. The validated HPLC?CL method was successfully applied to determine NE and DA in rat brain without prior sample purification. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantitative Monitoring of Rutin in Human Urine by Flow Injection‐Chemiluminescence Analysis

In this paper, a rapid and sensitive flow injection‐chemiluminescence (FI‐CL ) method is proposed for the quantitative determination of rutin based on the inhibitory effect of rutin on the chemiluminescence intensity from the luminol–chymotrypsin (CT ) system. The decrease of CL intensity was found to be proportional to the logarithm of rutin concentration in the range 0.1–30.0 ng/mL . A method for the quantification of rutin is proposed, with the limit of detection (LOD ) of 0.03 ng/mL (3σ). A complete analytical process including sampling and washing for rutin determination, which was conducted at a flow rate of 2.0 mL /min, could be performed completely within 30 s, yielding a sample efficiency of 120 h⁻¹. The proposed procedure was successfully applied for the determination of rutin in human urine after oral intake, with recoveries varying from 93.9 to 108.1% and relative standard derivation <4.0% (n = 5). Results showed that urine reached the maximum concentration at ~2.5 h, and the total excretion ratios were (83.5 ± 0.6) and (86.8 ± 0.7)%, respectively, for two volunteers in 8 h. The pharmacokinetic parameters, including the half‐life (1.05 ± 0.02 h), absorption rate constant (1.18 ± 0.01 h⁻¹), and elimination rate constant (0.70 ± 0.01 h⁻¹), were obtained. The possible CL mechanism of the luminol–CT –rutin reaction is discussed by FI‐CL , fluorescence, and molecular docking methods.     

A Novel Electrogenerated Chemiluminescence Reaction Scheme Using Core-Shell LuminoI-Based SiO2 Nanoparticles as a Regulator and Its Analytical Application

A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC） reaction as well as the subsequent chemiluminescence （CL） reaction not only could be separated spatially, but also presented high efficiency for analytical purpose. In this case, the core-shell luminol-based SiO2 nanoparticles offered more potential to avoid the contradiction between the EC and the CL reaction conditions. A new ECL method based on the nanoparticle was developed, and isoniazid was selected as a model analyte to illustrate the characteristics of this new ECL method. Under the selected conditions, the proposed ECL response to isoniazid concentration was linear in the range of 1.0 ×10^-10 to 1.0 × 10^-6 g/mL with 2 × 10^-11g/mL detection limit.     

Sensitive determination of sub-nanogram amounts of rutin by its inhibition on chemiluminescence with immobilized reagents

An interesting inhibitory effect of rutin on the chemiluminescence (CL) reaction between luminol and periodate was reported, and this effect was used for the determination of rutin in medicine and human urine. The CL reagents, luminol and periodate, were both immobilized on an anion-exchange column. The CL signal produced by the reaction between luminol and periodate, which were eluted from the column through water injection, was decreased in the presence of rutin. Rutin was sensed by measuring the decrement of CL intensity, and which was observed to be linear over the logarithm of 0.1-30 ngml(-1) rutin concentration range, and the limit of detection was 0.03 ngml(-1) (3sigma). At a flow rate of 2.0 mlmin(-1), both sampling and washing could be performed in 0.5 min with a relative standard deviation of less than 3.0%. The method proposed offered reagent-less procedures and remarkable stability in the determination of rutin, and could be easily reused over 80 h. The method proposed was applied successfully in the determination of rutin in pharmaceutical preparations and monitoring the excretion of rutin in human urine.     

Pre-evaluation of metal ions as a catalyst on chemiluminometric sequential injection analysis with luminol-H2O2 system

Catalytic effect of metal ions on luminol chemiluminescence (CL) was investigated by sequential injection analysis (SIA). The SIA system was set up with two solenoid micropumps, an eight-port selection valve, and a photosensor module with a fountain-type chemiluminescence cell. The SIA system was controlled and the CL signals were collected by a LabVIEW program. Aqueous solutions of luminol, H₂O₂, and a sample solution containing metal ion were sequentially aspirated to the holding coil, and the zones were immediately propelled to the detection cell. After optimizing the parameters using 1 × 10⁻⁵ M Fe³⁺ solution, catalytic effect of some metal species was compared. Among 16 metal species examined, relatively strong CL responses were obtained with Fe³⁺, Fe²⁺, VO²⁺, VO₃⁻, MnO₄⁻, Co²⁺, and Cu²⁺. The limits of detection by the present SIA system were comparable to FIA systems. Permanganate ion showed the highest CL sensitivity among the metal species examined; the calibration graph for MnO₄⁻ was linear at the concentration level of 10⁻⁸ M and the limit of detection for MnO₄⁻ was 4.0 × 10⁻¹⁰ M (S/N = 3).     

Ultrastrong Chemiluminescence Activity of Nanocarbon Materials after Ozonation and Their Effects on Different Chemiluminescent Systems

Ozonized nanocarbon materials with different dimensionalities, structures, and components exhibited significantly different chemiluminescence (CL) activities. The ozonation time and the weight ratio of hydroxyl carbon nanotubes (d≈8 nm, hyCNTs‐8) and graphene oxide (GO) strongly affected the CL activity of ozonized hybrids. Among GO, hyCNTs‐8, and GO/hyCNTs‐8, the GO/hyCNTs‐8 hybrids exhibited the strongest CL‐enhancing properties toward the luminol/H₂O₂ system, in contrast to previous reports. This study provides new understanding of the CL activity and CL‐enhancing properties of nanocarbon materials in signal‐enhanced analytical and biomedical fields.     

Sensitive determination of norepinephrine,epinephrine, dopamine and 5‐hydroxytryptamine by coupling HPLC with [Ag(HIO6)2]5−–luminol chemiluminescence detection

Based on the enhancing effects of norepinephrine (NE), epinephrine (EP), dopamine (DA) and 5‐hydroxytryptamine (5‐HT) on the chemiluminescence (CL) reaction between [Ag(HIO₆)₂]^5? and luminol in alkaline solution, a high‐performance liquid chromatography (HPLC) method with CL detection was explored for the sensitive determination of monoamine neurotransmitters for the first time. The UV–visible absorption spectra were recorded to study the enhancement mechanism of monoamine neurotransmitters on the CL of [Ag(HIO₆)₂]^5? and luminol reaction. The HPLC separation of NE, EP, DA and 5‐HT was achieved with isocratic elution using a mixture of aqueous 0.2% phosphoric acid and methanol (5:95, v/v) within 11.0 min. Under the optimized conditions, the detection limits of NE, EP, DA, and 5‐HT were 4.8, 0.9, 1.9 and 2.3 ng/mL, respectively, corresponding to 17.6–96.0 pg for 20 μL sample injection. The recoveries of monoamine neurotransmitters in rat brain were >95.6% with the precisions expressed by RSD <5.0%. The validated HPLC‐CL method was successfully applied for the quantification of NE, EP, DA and 5‐HT in rat brain. This method has promising potential for some biological and clinical investigations focusing on the levels of monoamine neurotransmitters. Copyright © 2016 John Wiley & Sons, Ltd.     

Aptamer‐based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection

A novel aptamer‐based CE with chemiluminescence (CL) assay was developed for highly sensitive detection of human immunoglobulin E (IgE). The IgE aptamer was conjugated with gold nanoparticles (AuNPs) to form AuNPs‐aptamer that could specifically recognize the IgE to produce an AuNPs‐aptamer‐IgE complex. The mixture of the AuNPs‐aptamer‐IgE complex and the unbounded AuNPs‐aptamer could be effectively separated by CE and sensitively detected with luminol‐H₂O₂ CL system. By taking the advantage of the excellent catalytic behavior of AuNPs on luminol‐H₂O₂ CL system, the ultrasensitive detection of IgE was achieved. The detection limit of IgE is 7.6 fM (S/N = 3) with a linear range from 0.025 to 250 pM. Successful detection of IgE in human serum samples was demonstrated and the recoveries of 94.9–103.2% were obtained. The excellent assay features of the developed approach are its specificity, sensitivity, adaptability, and very small sample consumption. Our design provides a methodology model for determination of rare proteins in biological samples.     

Chemiluminescent Logic Gates Based on Functionalized Gold Nanoparticles/Graphene Oxide Nanocomposites

Label‐free logic gates (AND, OR, and INHIBIT) based on chemiluminescence (CL) as new optical readout signal have been developed by taking advantage of the unique CL activity of luminol‐ and lucigenin‐functionalized gold nanoparticles/graphene oxide (luminol‐lucigenin/AuNPs/GO) nanocomposites. It was found that Fe²⁺ ions could induce the CL emission of luminol‐lucigenin/AuNPs/GO nanocomposites in alkaline solution. On this basis, by using Fe²⁺ ions and NaOH as the inputs and the CL signal as the output, an AND logic gate was fabricated. When the initial reaction system contained luminol‐lucigenin/AuNPs/GO nanocomposites and NaOH, either Fe²⁺ ions or Ag⁺ ions could react with the luminol‐lucigenin/AuNPs/GO nanocomposites to produce a strong CL emission. This result was used to design an OR logic gate using Fe²⁺ ions and Ag⁺ ions as the inputs and CL signal as the output. Moreover, two INHIBIT logic gates for Fe²⁺ and Ag⁺ were also developed using by NaClO and L ‐cysteine as their CL inhibitors, respectively. Furthermore, the proposed logic gates were successfully used to detect Fe²⁺, Ag⁺, and L ‐cysteine, respectively. The developed logic gates may find future applications in sensing, clinical diagnostics, and environmental monitoring.     

Enzymeless determination of total sugar by luminol–tetrachloroaurate chemiluminescence on chip to analyze food samples

Chemiluminescence (CL) emission from luminol–tetrachloroaurate ([AuCl₄]^?) system studied in presence of monosaccharide sugars such as glucose and fructose was investigated on a microfluidic chip fabricated by the soft lithography technique. CL emission from the luminol–[AuCl₄]^? system at 430?nm was intensified remarkably by the catalytic activity of glucose and fructose at room temperature. Under optimized conditions, the CL emission intensity of the system was found to be linearly related to the concentration of the sugars. Based on this observation, nonenzymatic determination of total sugar (glucose, fructose, or hydrolyzable sucrose) was performed in a rapid and sensitive analytical method. The results revealed that the linearity ranged from 9 to 1,750?μM for glucose and 80 to 1,750?μM for fructose, with a limit of detection of 0.65 and 0.69?μM, respectively. The relative standard deviations determined at 250?μM based on six repetitive injections were 1.13 and 1.15?% for glucose and fructose, respectively. The developed method was successfully applied for determination of the total sugar concentration in food and beverages.

Chemiluminescence reactions of luminol system catalyzed by nanoparticles of a gold/silver alloy

The chemiluminescence (CL) of luminol–H₂O₂ system is strongly enhanced on addition of nanoparticles composed of a gold/silver alloy (ratio 5:4). The effect is attributed to a catalytically enhanced decomposition of H₂O₂ to produce reactive oxygen species. A reaction mechanism is proposed. Organic compounds containing hydroxy, amino, or thiol groups (such as amino acids, dopamine, pyrocatechol) can inhibit the CL signal of the system. It is concluded that the system has a large potential in terms of the determination of such compounds.     

Determination of Nicotinamide in Food and Human Fluid Samples by Capillary

A rapid and simple capillary electrophoresis (CE) coupled with chemiluminescence (CL) detection was proposed for analysis of nicotinamide. This method was based on the inhibitory effect of nicotinamide to CL reaction of luminol‐K₃Fe(CN)₆ in alkaline aqueous solution. Under the optimal conditions, nico‐tinamide can be assayed in the range of 0.01–10.0 μM with a limit of detection of 3.0 nM. The whole analysis process can be completed within 11 min. The relative standard deviations of the signal intensity and the migration time were 3.0% and 1.5% for a standard sample at 0.1 μM, respectively. The presented CE‐CL method was successfully applied to the determination of nicotinamide in yogurt, human urine and plasma samples.     

On-Line Monitoring of Formaldehyde In Water and Air Using Chemiluminescence Detection

A rapid and sensitive chemiluminescence flow sensor for the determination of formaldehyde was proposed in this article. The analytical reagents involved in chemiluminescence (CL) reaction, luminol and KIO₄, were both immobilized on an anion-exchange column. The CL signal produced by the reaction between luminol and KIO₄, which were eluted from the column through water injection, was decreased in the presence of formaldehyde. Formaldehyde was sensed by measuring the decrement of CL intensity, which was observed linear over the logarithm of formaldehyde concentration range of 5.0-1000.0 ng mL^?1, and the limit of detection is 1.8 ng mL^?1 (3σ). At a flow rate of 2.0 mL min^?1, including sampling and washing, could be performed in 0.5 min with a relative standard deviation of less than 3.0%. The flow sensor offered reagentless procedures and remarkable stability in determination of formaldehyde, and could be easily re-used over 80 h. The proposed flow microsensor was applied successfully in the determination of formaldehyde in artificial water samples and air.     

Kinetics of metribuzin degradation by colloidal manganese dioxide in absence and presence of surfactants

The kinetics of the degradation of metribuzin by water-soluble colloidal MnO₂ in acidic medium (HClO₄) were studied spectrophotometrically in the absence and presence of surfactants. The experiments were performed under pseudo-first-order reaction conditions in respect of MnO₂. The degradation was observed to be of the first order in respect of MnO₂ while of fractional order for both metribuzin and HClO₄. The rate constant for the degradation of metribuzin was observed to decrease as the concentration of MnO₂ increased. The anionic surfactant, sodium dodecyl sulphate (SDS), was observed to be ineffective whereas the non-ionic surfactant, Triton X-100 (TX-100), accelerated the reaction rate. However, the cationic surfactant, cetyltrimethyl ammonium bromide (CTAB), caused flocculation with oppositely-charged colloidal MnO₂; hence further study was not possible. The catalytic effect of TX-100 was discussed in the light of the available mathematical model. The kinetic data were exploited to generate the various activation parameters for the oxidative degradation of metribuzin by colloidal MnO₂ in the absence as well as the presence of the non-ionic surfactant, TX-100.     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

Capillary Electrophoresis Chemiluminescence for the Analysis of Flavonoids in Pharmaceuticals and Human Plasma

A capillary electrophoresis (CE)-chemiluminescence (CL) method has been developed for the determination of the pharmacologically active flavonoids, including rutin and quercetin in pharmaceuticals and human plasma containing Ginkgo biloba leaves extract (EGb). The separation was conducted in borate buffer and luminol. The post-column CL reagent was K₃Fe(CN)₆ in NaOH medium. Rutin and quercetin were baseline separated within 10 min with detection limits of 1.0 and 5.0 nM, respectively. The maximum intra- and inter-day relative standard deviations (RSD) of migration time of analytes were <3.5 %. Moreover, the high selectivity of the CL detection and the high-separation efficiency of CE render the method the potential of quick analyzing the pharmacologically active substances in complex matrix with satisfactory results.

     

Pt NPs catalyzed chemiluminescence method for Hg2+ detection based on a flow injection system

Establishing a simple and accurate method for Hg²⁺ detection is of great importance for the environment and human health. In this work, platinum nanoparticles (Pt NPs) with different capped agents and morphologies were synthesized. It was found that Pt NPs exhibited peroxidase‐like activity that can catalyze the chemiluminescence (CL) of the luminol system without H₂O₂. The most intensive CL signals were obtained by using PVP‐capped Pt NPs as catalysis. Based on the fact that Hg²⁺ could further enhance the CL intensity in the Pt NPs‐luminol CL system, a Pt NPs‐catalyzed CL method based on a flow injection system is developed for the sensitive analysis of Hg²⁺. When the concentration of Hg²⁺ in the system increases, the CL intensity would together increase, thereby achieving sensitive Hg²⁺ detection. The limit of detection (LOD) was calculated to be 8.6 nM. This developed method provides a simple and rapid approach for the sensitive detection of Hg²⁺ and shows great promise for applications in other complex systems.     

Quantification of taurine and amino acids in mice single fibrosarcoma cell by microchip electrophoresis coupled with chemiluminescence detection

A method based on MCE coupled with chemiluminescence (CL) detection was developed for the determination of taurine (Tau) and amino acids including alanine (Ala), glycine (Gly), tryptophan (Trp), glutamic acid (Glu) and aspartic acid (Asp) present in mice single fibrosarcoma (S180) cells. Cell injection, loading, cytolysis, electrophoretic separation and CL detection were integrated onto a simple double‐T microfluidic chip. The intracellular constituents were electrophoretically separated within 150 s. The CL detection was based on the enhancement effects of Tau and amino acids on the CL reaction of luminol with H₂O₂ and Cu²⁺. The average amounts of Tau, Trp, Gly, Ala, Glu and Asp in per S180 cell from a cell population were 4.73, 1.23, 2.65, 1.94, 1.61 and 1.99 fmol. Ten S180 cells were analyzed, and the contents of Tau, Trp, Gly, Ala, Glu and Asp in mice single S180 cells were found to be in the range of 1.78–8.84, 0.95–2.31, 1.08–6.87, 1.03–4.05, 0.84–2.61 and 0.82–3.68 fmol, respectively. This work demonstrates that MCE coupled with CL detection is a useful analytical tool that is simple, quick and highly sensitive for single‐cell analysis.     

Effect of ionic and non-ionic surfactants on the reduction of water soluble colloidal MnO<Subscript>2</Subscript> by glycolic acid

Kinetics of the redox reaction between colloidal MnO₂ and glycolic acid have been studied spectrophotometrically by monitoring the decay in the absorbance of colloidal MnO₂ in absence and presence of surfactants. Anionic sodium dodecyl sulfate has no effect, non-ionic Triton X-100 catalyzed the reaction and experiments were not possible in presence of cationic cetyltrimethylammonium bromide due to the precipitation of MnO₂.The reaction followed the same type of kinetic behavior, i.e., fractional-, first- and fractional-order dependencies, respectively, in [glycolic acid], [MnO₂] and [H⁺ ] in both the media. Effects of gum arabic and manganese(II) have also been studied and discussed. Mechanisms in accordance with the experimental data are proposed for the reaction.     

H2O2-鲁米诺-荧光素钠-K2CO3高灵敏化学发光法测定二氧化碳

在碱性介质中, CO₃^2－对H₂O₂氧化鲁米诺化学发光反应具有重要作用, 荧光素钠对该反应具有很强的增敏作用. 据此, 建立了化学发光法测定二氧化碳的新方法. 方法的线性范围为1.0×10^－10～5.0×10^－6 mol•L^－1 CO₃^2－, 检出限为 1.2×10^－11 mol•L^－1 CO₃^2－ (相当于5.3×10^－10 g•L^－1 CO₂). 该方法用于室内外空气中二氧化碳含量的测定, 相对标准偏差1.8%～2.1% (n＝11), 加标实验回收率97.6%～101.4%. 论文还探讨了反应的发光机理, 发光反应很可能是由溶液中的CO₃^2－与H₂O₂作用而产生的活性自由基引发, 荧光素钠对发光的增敏作用为化学能量转移过程.