Preparation and Application of Fullerene C60‐Polymers in Piezoelectric Quartz Crystal Sensors for Hemoglobin and Olefins

The C60—polycinnamaldehyde (C₆₀—PCA) and C60—polyphenylacetylene (C60—PPA) polymers were synthesized by the Friedel—Craft reaction and applied as piezoelectric (PZ) quartz crystal coating materials. A C60—polycinnamaldehyde (PCA) coated piezoelectric quartz crystal liquid sensor with a homemade computer interface was prepared and applied as a PZ hemoglobin sensor. The adsorption of hemoglobin onto the C60—PCA coated crystal resulted in a decreased oscillating frequency. The variations in crystal frequency were converted to voltage with a frequency to voltage converter, followed by amplification with OPA and data acquisition with an analog to digital converter. The PZ hemoglobin sensor exhibited good sensitivity of 6530 Hz/(mg/mL) with a detection limit at the ppm level for hemoglobin. Further, a C60—polyphenylacetylene (C60—PPA) coated piezoelectric quartz crystal gas sensor with an Intell‐8255 data processing system for various olefin vapors was also made. The aromatic hydrocarbons such as toluene seem to have greater adsorption onto C60—PPA membrane than alkynes, alkenes, and alkanes. The adsorption of polycyclic aromatic hydrocarbons (PAHs) onto the C60—PPA membrane was also examined. The C₆₀—PPA coated PZ crystal gas sensor showed much better sensitivity for PAHs than for other olefins such as toluene, 1‐hexyne and 1‐hexene, and a much larger frequency shift for naphthalene than other PAHs was also found.     

Polymer Coated Piezoelectric Quartz Crystal Protein Bio‐Sensors

A polymer coated piezoelectric crystal detection system with a home‐made computer interface for signal acquisition and data processing was prepared as a liquid chromatographic detector for various proteins. Various polymers, e.g., polyvinyl aldehhyde (polyacrolein) (PVA), polyacrylamide/glutaldehyde (PAA/GA) and bio‐gel A, were used as coating materials on quartz crystals for adsorption of various protein molecules, e.g., catalase (CA), hemoglobin (Hb), α‐chymotrypsin (Ch), albumin (Ab). The frequency responses of the polyacrlein coated piezoelectric detector for various proteins were in the order: catalase> hemoglobin> α‐chymotrypsin > albumin. In contrast, the order of the frequency responses of bio‐gel A and polyacrylamide/glutaldehyde coated piezoelectric crystals for these proteins were: hemoglobin> catalase > α‐chymotrypsin ≥ albumin and hemoglobin > albumin > catalase. The polyacrolein coated piezoelectric crystal protein detector exhibited a good linear frequency response with a high sensitivity of about 2.5×10³ Hz/(mg/mL) for catalase. In addition, bio‐gel A and polyacrylamide/glutaraldehyde coated crystals were sensitive to hemoglobin with sensitivities of about 4.5×10³ Hz/(mg/mL) and 3.0×10³ Hz/(mg/mL), respectively. Study of the interference of various organic molecules, e.g., alcohols, amines, ketones and carboxylic acids, in the detection of proteins with theses polymer coated crystals was also made. The polyacrolein coated crystal for proteins under went less interference from various organic molecules than bio‐gel A or polyacrylamide/glutaraldehyde coated crystals. Effects of coating load, concentration of proteins and flow rate of liquid chromatographic eluent were also investigated and discussed.     

Detection of Hydrogen Peroxide and Glucose Based on Immobilized C60‐Catalase Enzyme

The interaction between fullerene C60 and catalase enzyme was studied with a fullerene C60‐coated piezoelectric (PZ) quartz crystal sensor. The partially irreversible response of the C60‐coated PZ crystal sensor for catalase was observed by the desorption study, which implied that C60 could chemically react with catalase. Thus, immobilized fullerene C60‐catalase enzyme was synthesized and applied in determining hydrogen peroxide in aqueous solutions. An oxygen electrode detector with the immobilized C60‐catalase was also employed to detect oxygen, a product of the hydrolysis of hydrogen peroxide which was catalyzed by the C60‐catalase. The oxygen electrode/C60‐catalase detection system exhibited linear responses to the concentration of hydrogen peroxide and amount of immobilized C60‐catalase enzyme that was used. The effects of pH and temperature on the activity of the immobilized C60‐catalase enzyme were also investigated. Optimum pH at 7.0 and optimum temperature at 25 °C for activity of the insoluble immobilized C60‐catalase enzyme were found. The immobilized C60‐catalase enzyme could be reused with good repeatability of the activity. The lifetime of the immobilized C60‐catalase enzyme was long enough with an activity of 93% after 95 days. The immobilized C60‐catalase enzyme was also applied in determining glucose which was oxidized with glucose oxidase resulting in producing hydrogen peroxide, followed by detecting hydrogen peroxide with the oxygen electrode/C60‐catalase detection system.     

Insulin Surface Acoustic Wave Immunosensor Based on Immobilized C60/Anti‐Insulin Antibody

Immobilized fullerene C₆₀/anti‐insulin antibody was prepared and applied in shear horizontal surface acoustic wave (SH‐SAW) immunosensors to detect insulin in aqueous solutions. The immobilizations of anti‐insulin onto fullerene were studied through a C₆₀/PVC coated SH‐SAW sensor system in liquid. The partially irreversible frequency response for an anti‐insulin antibody was observed by the desorption study, which implied that fullerene could chemically react with anti‐insulin. C₆₀/anti‐insulin coating materials were successfully prepared and identified with an FTIR spectrometer. The C₆₀/anti‐insulin coated SH‐SAW immunosensors were developed and applied for detection of insulin in aqueous solutions. Within the range of normal human insulin concentration, the SH‐SAW immunosensors immobilized with C₆₀/anti‐insulin exhibited linear frequency responses to the concentration of insulin with a sensitivity of 130 Hz/pM. The SH‐SAW immunosensor immobilized with C₆₀/anti‐insulin showed a detection limit of 0.58 pM for insulin in aqueous solution. The interference of various common bio‐species in human blood, e.g. urea, ascorbic acid, tyrosine, and metal ions, to the SH‐SAW immunosensor immobilized with C₆₀/anti‐insulin for insulin was investigated. These common bio‐species interferences showed nearly no interference to the SAW immunosensors coated with C₆₀/anti‐insulin. The reproducibility of the SH‐SAW immunosensor immobilized with C₆₀/anti‐insulin for insulin was also investigated and is discussed.     

Preparation and Application of Immobilized Fullerene C60‐Heparin for Anticoagulation of Blood

The interaction between fullerene C60 and heparin was studied using a fullerene C60‐coated piezoelectric quartz crystal sensor. The irreversible response of the piezoelectric quartz crystal was found which could be attributed to the quite strong adsorption of heparin onto the C60 molecule. Immobilized fullerene C60‐Heparin was prepared and successfully applied as a good inhibitor for blood clotting. Like solvated heparin, both wet and dry C60‐heparin solid all demonstrated excellent ability of anticoagulation of blood. The blood clotting time with C60‐heparin solid was found to be > 7 days, while only 17.9 min required for blood clotting time in the absence of C60‐heparin solid. Furthermore, the C60‐heparin coated artificial PVC blood vessels were prepared by coating fullerene C60 onto the surface of artificial PVC blood vessels, followed by the adsorption of water solvated heparin onto the fullerene C60 molecule to form C60‐heparin coating. The blood clotting time of blood in artificial PVC blood vessels with C60‐heparin coating was found to be > 30 days, while only ≤ 30 min. of blood clotting time without the C60‐Heparin coating was observed. The C60‐heparin coated artificial PVC blood vessels can be expected to be employed in human body for the anticoagulation of blood.     

Piezoelectric Crystal Membrane Chemical Sensors Based on Fullerene and Macrocyclic Polyethers

Various reusable and sensitive piezoelectric (PZ) quartz crystal membrane sensors with home‐made computer interfaces for signal acquisition and data processing were developed to detect organic/inorganic vapors and organic/inorganic/biologic species in solutions, respectively. Fullerene(C60), fullerene derivatives and artificial macrocyclic polyethers, e.g., crown ethers and cryptands, were synthesized and applied as coating materials on quartz crystals of the PZ crystal sensors. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic or inorganic species onto coating material molecules on the crystal surface. The crown ether‐coated PZ crystal gas detector exhibited high sensitivity with a frequency shift range of 10–340 Hz/(mg/L) for polar organic gases, a short response time (< 2.0 min.), good selectivity, and good reproducibility. The Ag(I)/crptand22 and Ru(III) / crptand22 coated PZ gas detectors were also prepared for nonpolar organic vapors, e.g., alkynes and alkenes. The frequency shifts of the nonpolar PZ sensors were in the order: alkynes > alkenes > alkanes. A Ti(IV)/Cryptand22‐coated PZ crystal sensor was also developed to detect the inorganic air pollutants, e.g., CO and NO₂. A piezoelectric gas sensor for both polar/nonpolar organic vapors based on C60‐cryptand22 was also prepared. The cryptand22‐coated PZ gas sensor was also employed as a GC detector for organic molecules. The cryptand22‐coated piezoelectric GC detectors compared well with the commercial thermal conductivity detector (TCD). The interaction between fullerene C60 and organic molecules was studied with a fullerene coated PZ gas detector. A multi‐channel PZ organic gas detector with PCA(Principal Component Analysis) and BPN (Back Propagation Neural) analysis methods was developed. Various liquid piezoelectric crystal sensors based on long‐chain macrocyclic polyethers, e.g., C₁₀H₂₁‐dibenzo‐16‐crown‐5, C₁₈H₃₇‐benzo‐15‐crown‐5, (C₁₇CO)₂‐cyptand22 and fullerene derivatives, e.g., C60‐NH‐cryptand22 and dibenzo‐16‐crown‐5‐C60, were also developed as HPLC detectors for metal ions, anions, and various organic compounds in solutions. The sensitive and highly selective PZ bio‐sensors based on enzymes, polyvinylaldehyde, polycinnaldehyde‐C60 and C60‐cryptand22 were developed to detect various biologic species, e.g., proteins, glucose, and urea. A quite sensitive EQCM (Electrochemical Quartz Crystal Micro‐balance) detection system was also developed for detection of trace heavy metal ions.     

Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Immobilized Fullerene C60‐Enzyme‐Based Electrochemical Glucose Sensor

A mixed‐valence cluster of cobalt(II) hexacyanoferrate and fullerene C60‐enzyme‐based electrochemical glucose sensor was developed. A water insoluble fullerene C60‐glucose oxidase (C60‐GOD) was prepared and applied as an immobilized enzyme on a glassy carbon electrode with cobalt(II) hexacyanoferrate for analysis of glucose. The glucose in 0.1 M KCl/phosphate buffer solution at pH = 6 was measured with an applied electrode potential at 0.0 mV (vs Ag/AgCl reference electrode). The C60‐GOD‐based electrochemical glucose sensor exhibited efficient electro‐catalytic activity toward the liberated hydrogen peroxide and allowed cathodic detection of glucose. The C60‐GOD electrochemical glucose sensor also showed quite good selectivity to glucose with no interference from easily oxidizable biospecies, e.g. uric acid, ascorbic acid, cysteine, tyrosine, acetaminophen and galactose. The current of H₂O₂ reduced by cobalt(II) hexacyanoferrate was found to be proportional to the concentration of glucose in aqueous solutions. The immobilized C60‐GOD enzyme‐based glucose sensor exhibited a good linear response up to 8 mM glucose with a sensitivity of 5.60 × 10² nA/mM and a quite short response time of 5 sec. The C60‐GOD‐based glucose sensor also showed a good sensitivity with a detection limit of 1.6 × 10^‐6 M and a high reproducibility with a relative standard deviation (RSD) of 4.26%. Effects of pH and temperature on the responses of the immobilized C60‐GOD/cobalt(II) hexacyanoferrate‐based electrochemical glucose sensor were also studied and discussed.     

Piezoelectric crystal/surface acoustic wave biosensors based on fullerene C60 and enzymes/antibodies/proteins

The development of piezoelectric (PZ) quartz crystal and surface acoustic wave (SAW) biosensors based on fullerene C60 and immobilized C60-enzymes/antibodies/proteins for the detection of various biological species are reported. The C60 coated piezoelectric crystal sensors can be applied to the study of interactions between fullerene C60 and some biological species, such as enzymes, antibodies, proteins and heparin. The partial irreversible responses for some biospecies from C60 molecules were observed by the desorption study which implied that C60 could chemically react with these biological species. Thus, immobilized biological species, e.g. C60-GOD, C60-catalase, C60-urease, C60-lipase, C60-anti IgG, C60-heparin, C60-Hb, C60-Mb and C60-anti-Hb were successfully prepared. The immobilized C60-GOD, C60-catalase, C60-urease, C60-anti-IgG and C60-anti-Hb were employed as adsorbents onto quartz crystal of various piezoelectric biosensors to detect glucose, H₂O₂, urea, IgG, and hemoglobin respectively. The immobilized C60-lipase was applied to distinguishably catalyze the hydrolysis of some optical isomers such as L- and D-phenyalanine methyl ester and to determine these optical isomers. The immobilized C60-heparin was employed as a good inhibitor for blood clotting like solvated heparin. The H₂O₂ bio-sensor was set up with the immobilized C60-catalase to detect oxygen, the product of the hydrolysis of H₂O₂ by C60-catalase. The immobilized C60-GOD enzyme piezoelectric glucose sensor exhibited a good sensitivity and a good lower limit for glucose. A piezoelectric crystal urea biosensor based on immobilized C60-urease was also prepared to detect urea. Comparison between solvated and immobilized enzymes used for biosensors was also made. The C60-anti IgG or C60-anti-Hb coated IgG piezoelectric crystal sensors exhibited good sensitivity, selectivity and repeatability for IgG or hemoglobin. Fullerene C60-Hb and C60-myoglobin (C60-Mb) coated surface acoustic wave (SAW) immunosensors were prepared to detect the anti-hemoglobin (anti-Hb) and anti-myoglobin (anti-Mb) antibody, respectively. An electrochemical SAW (ESAW) detection system was also developed to detect glucose in aqueous solutions.     

Fullerene‐Crown Ether Coated Piezoelectric Crystal Liquid Chromatographic Detector for Metal Ions and Polar/Nonpolar Organic Molecules

Fullerene(C60)‐dibenzo‐16‐crown‐5‐oxyacetic acid (DBI6C5‐OCH₂‐COOC₆₀) was prepared and applied as the coating material on piezoelectric quartz crystals for detection of various metal ions and polar/nonpolar organic molecules. The C60‐crown ether‐coated piezoelectric crystal sensor with a home‐made computer interface for signal acquisition and data processing was applied as an ion chromatographic (IC) detector for various metal ions, e.g., alkali metal, alkaline earth metal and transition‐metal ions. The piezoelectric detector exhibited quite good sensitivity of 10⁴ ～ 10⁶ Hz/M and good detection limit of 10^?3 ～ 10^?4 M for these metal ions. The C60‐crown ether piezoelectric detector compared well with the commercial conductivity detector conventionally used for metal ions. The ionic size and ionic charge seemed to have significant effect on the frequency response of the piezoelectric detector. The C60‐crown ether coated piezoelectric crystal sensor was also employed as a high performance liquid chromatographic (HPLC) detector for various polar organic molecules with frequency responses in the order: amines > carboxylic acids > alcohols > ketones. Furthermore, nonpolar organic molecules, e.g., n‐hexane, 1‐hexene and 1‐hexyne, were also detected with this piezoelectric crystal detector. The frequency responses of the piezoelectric crystal detector for these nonpolar organic molecules were in the following order: alkynes > alkenes > alkanes. The effects of solvents and flow rate on the frequency responses of the piezoelectric crystal detector were investigated. The C60‐crown ether coated piezoelectric crystal detector also showed short response time (< 1 min.) and good reproducibility.     

Preparation and Characterization of Transparent and UV‐Shielding Epoxy/SR‐494/APTMS/ZnO Nanocomposites with High Heat Resistance and Anti‐Static Properties

This research is to develop transparent and UV‐shielding Epoxy/SR‐494/APTMS/ZnO nanocomposite materials with high heat resistant and anti‐static properties. Firstly, the APTMS (3‐(acryloxypropyl)trimethoxysilane) performs the silanol intermediates by hydrolysis in pH 4～5 acid solution. The inorganic anti‐static fillers of powder ZnO can be successfully coupled and crosslinked to Epoxy/SR‐494 organic matrixes with these silanols of APTMS coupling agents. The remained active ‐OH functional groups of the APTMS/ZnO complexes can network bonding with epoxy prepolymers. Therefore, the Epoxy/APTMS/ZnO complexes with good anti‐static composites will be successfully prepared. Finally, in order to improve the thermal resistant and mechanical properties, the polyfunctionalized SR‐494 (pentaery‐thritol tetracrylate) acrylate monomers and the Epoxy/APTMS/ZnO composites are chain polymerized to form an excellent cross‐linking structure of organic/inorganic nanocomposites. The chemical bonding formation and the best weight contents of reaction components are identified by FT‐IR spectra. The thermal resistance, transparence, surface electric resistance, and hardness of these nanocomposites are measured by TGA, DSC, UV‐Visible, surface resistant meter, and pencil hardness tester respectively. Experimental results show that these nanocomposites have 90% transmittance and the best Td value is 389.3 °C which is 109.0 °C and 78.6 °C higher than those of pure epoxy resin and pure SR‐494 acrylate resin respectively. The glass transition temperature is not detected below 200 °C. The surface electric resistances of Epoxy/SR‐494/APTMS/ZnO hybrid thin films are decreased from 3.14 × 10¹³ to 5.13 × 10⁷ Ω/cm². The hardness of these nanocomposites is as high as 8H, and those hybrid films have high UV‐shielding properties. The morphology structures of the hybrid thin films are estimated by SEM. The results show that the optical thin films are evenly distributed with inorganic colloidal particles and the average particle size of these nanocomposites is 45～80 nm, while the powder ZnO (particle size: 2～5 μm) was used as inorganic filler.     

Fullerene‐β‐Cyclodextrin Conjugate Based Electrochemical Sensing Device for Ultrasensitive Detection of p‐Nitrophenol

The article describes the use of a fullerene (C₆₀)‐β‐cyclodextrin conjugate, synthesized via 1,3‐dipolar cycloaddition, for the ultrasensitive electrochemical detection of p‐nitrophenol. This conjugate was successfully immobilized on the surface of a glassy carbon electrode and the developed device showed high activity towards p‐nitrophenol due to the synergetic effect of C₆₀, the latter becoming highly conductive upon reduction. The determination of p‐nitrophenol was performed by using square wave voltammetry over a concentration range from 2.8×10^?9 mol L^?1 to 4.2×10^?7 mol L^?1 and the detection limit was calculated to be 1.2×10^?9 mol L^?1.     

Direct Electrochemistry of Glucose Oxidase Immobilized on Titanium Carbide‐Au Nanoparticles‐Fullerene C60 Composite Film and Its Biosensing for Glucose

The direct electrochemistry of glucose oxidase (GOD) immobilized on the designed titanium carbide‐Au nanoparticles‐fullerene C₆₀ composite film modified glassy carbon electrode (TiC‐AuNPs‐C₆₀/GCE) and its biosensing for glucose were investigated. UV‐visible and Fourier‐transform infrared spectra of the resulting GOD/TiC‐AuNPs‐C₆₀ composite film suggested that the immobilized GOD retained its original structure. The direct electron transfer behaviors of immobilized GOD at the GOD/TiC‐AuNPs‐C₆₀/GCE were investigated by cyclic voltammetry in which a pair of well‐defined, quasi‐reversible redox peaks with the formal potential (E^0′) of ‐0.484 V (vs. SCE) in phosphate buffer solution (0.05 M, pH 7.0) at the scan rate of 100 mV·s^?1 were obtained. The proposed GOD modified electrode exhibited an excellent electrocatalytic activity to the reduction of glucose, and the currents of glucose reduction peak were linearly related to glucose concentration in a wider linearity range from 5.0 × 10^?6 to 1.6 × 10^?4 M with a correlation coefficient of 0.9965 and a detection limit of 2.0 × 10^?6 M (S/N = 3). The sensitivity and the apparent Michaelis‐Menten constant (K_M^app) were determined to be 149.3 μA·mM^?1·cm^?2 and 6.2 × 10^?5 M, respectively. Thus, the protocol will have potential application in studying the electron transfer of enzyme and the design of novel electrochemical biosensors.     

Direct Electrochemistry and Catalytic Activity of Hemoglobin and Myoglobin Entrapped in PEG Film

Abstract

Direct electrochemistry and electrocatalysis of two heme proteins, hemoglobin (Hb) and myoglobin (Mb), incorporated in polyethylene glycol (PEG) films, were studied by cyclic voltammetry. The two proteins exhibited a pair of well‐defined, quasi‐reversible cyclic voltammetric peaks with the apparent formal potential at about ?0.21 V (Hb) and ?0.22 V (Mb), respectively, vs. saturated calomel electrode (SCE) in pH 5.0 acetate buffer solution, characteristic of the h eme Fe(III)/Fe(II) redox couples, indicating enhanced electron transfer between the proteins and the substrate electrode in the PEG film environment. The protein–PEG films could also exhibit excellent stability. Meanwhile, positions of Soret absorption band of the proteins in the PEG films suggested that the heme proteins kept their secondary structure similar to their native state in the medium pH range. Oxygen, trichloroacetic acid, nitric oxide, and hydrogen peroxide could all be catalytically reduced by Hb or Mb in PEG films.     

Conducting core‐sheath nanofibers for electroactive shape‐memory applications

Conducting nanofibers coated with polypyrrole (PPy) and poly(3‐hexylthiophene) (P3HT) exhibiting core‐sheath structures were prepared by vapor‐phase polymerization of the conducting polymers on electrospun polyurethane nanofibers. The synthesis of the conducting polymers was confirmed by Fourier transform infrared spectroscopy and energy‐disperse X‐ray spectroscopy. The surfaces of the PPy‐coated nanofibers were slightly rough, while very smooth and regular surfaces were observed in the case of the P3HT‐coated nanofibers. The initial polymerization rate of PPy was higher than that of P3HT. In addition, the electrical conductivities of the core‐sheath structured nanofiber webs of both types increased with polymerization time. The maximum sheet conductivity of the PPy and P3HT‐coated nanofiber webs was 5 × 10^?3 S/cm and 1 × 10^?2 S/cm, respectively. The webs of the conducting core‐sheath structured nanofibers were effective in generating sufficient electrical heating necessary for harnessing these materials for electroactive shape‐memory‐based applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrochemical Oxidation of Methionine Mediated by a Fullerene‐C60 Modified Gold Electrode

The usefulness of a C₆₀‐fullerene modified gold (Au) electrode in mediating the oxidation of methionine in the presence of potassium ions electrolyte has been demonstrated. During cyclic voltammetry, an oxidation peak of methionine appearing at +1.0 V vs. Ag/AgCl was observed. The oxidation current of methionine is enhanced by about 2 times using a C₆₀ modified gold electrode. The current enhancement is significantly dependent on pH, temperature and C₆₀ dosage. Calibration plot reveals linearity of up to 0.1 mM with a current sensitivity of close to 50 mA L mol^?1 and detection limit of 8.2×10^?6 M. The variation of scan rate study shows that the system undergoes diffusion‐controlled process. Diffusion coefficient and rate constant of methionine were determined using hydrodynamic method (rotating disk electrode) with values of 1.11×10^?5 cm² s^?1 and 0.0026 cm s^?1 respectively for unmodified electrode while the values of diffusion coefficient and rate constant of methionine using C₆₀ modified Au electrode are 5.7×10^?6 cm² s^?1 and 0.0021 cm s^?1 respectively.     

Synthesis and Anti‐tumor Evaluation of Novel C‐37 Modified Derivatives of Gambogic Acid

Gambogic acid (GA, 1 ), the most prominent representative of Garcinia natural products, has been reported to be a promising anti‐tumor agent. In order to further explore the structure‐activity relationship of GA and discover novel GA derivatives as anti‐tumor agents, 17 novel C‐37 modified derivatives of GA were synthesized and evaluated for their in vitro anti‐tumor activities against A549, HCT‐116, BGC‐823, HepG2 and MCF‐7 cancer cell lines. Among them, 11 compounds were found to be more potent than GA against some cancer cell lines. Notably, compound 8 was almost 5–10 folds more active than GA against A549 and BGC‐823 cell lines with the IC₅₀ values of 0.12 µmol·L^?1 and 0.57 µmol·L^?1, respectively. Chemical modification at C‐37 position of GA by introducing of hydrophilic amines could lead to increased activity and improved drug‐like properties. These findings will enhance our understanding of the structure‐activity relationship (SAR) of GA and lead to the discovery of novel GA derivatives as potential anti‐tumor agents.     

Electrochemical Investigation of Myoglobin in Layer‐by‐Layer Films Assembled with Sulfonated‐β‐Cyclodextrin

In this work, myoglobin (Mb) and sulfonated‐β‐cyclodextrin (S‐CD) were assembled into {S‐CD/Mb}_n layer‐by‐layer films on solid substrates. In pH 7.0 buffers, the {S‐CD/Mb}_n films assembled on electrodes showed a pair of well‐defined and nearly reversible CV peaks at about ?0.35 V vs. SCE. The stable CV response of {S‐CD/Mb}_n films could be used to electrocatalyze reduction of oxygen and hydrogen peroxide in solution. For comparison, another modified β‐cyclodextrin, carboxyethyl‐β‐cyclodextrin (C‐CD), was also assembled with Mb into {C‐CD/Mb}_n multilayer films. The driving forces of the assembly were explored and discussed.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Microwave‐assisted Synthesis of Novel 3,4‐Bis‐chalcone‐N‐arylpyrazoles and Their Anti‐inflammatory Activity

A series of 3,4‐bis‐chalcone‐N‐arylpyrazoles 3a‐h was prepared conveniently from diacetyl pyrazoles 2a,b . All reactions were carried out under conventional thermal heating and/or microwave irradiation. The structure of the latter functionally pyrazoles was confirmed under the bases of their IR, mass, ¹H NMR and ¹³C NMR. The X‐ray diffraction of compound 3e not only confirmed the chemical structure of 3a‐h , but also showed the E configuration of their chalcone moieties. Treatment of compound 3e with phenyl hydrazine in presence of acetic acid afforded the tri‐pyrazle 4 . The anti‐inflammatory activity of the newly synthesized compounds was investigated. Some of these compounds showed a moderate activity when compared with indomethacin as a reference drug. The combination between chalcone and pyrazole moieties revealed a variable effect in anti‐inflammatory activity.