Enantioseparation of dansyl amino acids by ligand‐exchange capillary electrophoresis with zinc(II)‐L‐phenylalaninamide complex

A novel method of chiral ligand‐exchange CE was developed with L ‐amino acylamides as a chiral ligand and zinc(II) as a central ion. It has been demonstrated that these chiral complexes, such as Zn(II)‐L ‐alaninamide, Zn(II)‐L ‐prolinamide, and Zn(II)‐L ‐phenylalaninamide, are suitable for use as chiral selectors for the enantioseparation of either individual pair of or mixed dansyl amino acids. The optimal separation running buffer consisted of 5 mM ammonium acetate, 100 mM boric acid, 4 mM ZnSO₄·7 H₂O, and 8 mM L ‐amino acylamides at pH 8.2. The experiments showed that apart from the effect of the concentration of the complexes on the resolution and the migration time, the buffer pH also had a sharp influence on resolution. The employed chiral ligands exhibited different enantioselectivities and enantiomer migration orders. D ‐Amino acids migrate faster than L ‐amino acids when Zn(II)‐L ‐alaninamide and Zn(II)‐L ‐phenylalaninamide are used as chiral selectors, but it was observed that the migration order is reversed when Zn(II)‐L ‐prolinamide is used as the chiral selector. Furthermore, the amount of dansylated amino acids is found to be highly dependent on the labeling temperature.     

Amino Acid Ionic Liquids as Chiral Ligands in Ligand‐Exchange Chiral Separations

Recently, amino acid ionic liquids (AAILs) have attracted much research interest. In this paper, we present the first application of AAILs in chiral separation based on the chiral ligand exchange principle. By using 1‐alkyl‐3‐methylimidazolium L ‐proline (L ‐Pro) as a chiral ligand coordinated with copper(II), four pairs of underivatized amino acid enantiomers—dl ‐phenylalanine (dl ‐Phe), dl ‐histidine (dl ‐His), dl ‐tryptophane (dl ‐Trp), and dl ‐tyrosine (dl ‐Tyr)—were successfully separated in two major chiral separation techniques, HPLC and capillary electrophoresis (CE), with higher enantioselectivity than conventionally used amino acid ligands (resolution (R_s)=3.26–10.81 for HPLC; R_s=1.34–4.27 for CE). Interestingly, increasing the alkyl chain length of the AAIL cation remarkably enhanced the enantioselectivity. It was inferred that the alkylmethylimidazolium cations and L ‐Pro form ion pairs on the surface of the stationary phase or on the inner surface of the capillary. The ternary copper complexes with L ‐Pro are consequently attached to the support surface, thus inducing an ion‐exchange type of retention for the dl ‐enantiomers. Therefore, the AAIL cation plays an essential role in the separation. This work demonstrates that AAILs are good alternatives to conventional amino acid ligands for ligand‐exchange‐based chiral separation. It also reveals the tremendous application potential of this new type of task‐specific ILs.     

Ultrafast FRET to Study Spontaneous Micelle‐to‐Vesicle Transitions in an Aqueous Mixed Surface‐Active Ionic‐Liquid System

The spontaneous micelle‐to‐vesicle transition in an aqueous mixture of two surface‐active ionic liquids (SAILs), namely, 1‐butyl‐3‐methylimidazolium n‐octylsulfate ([C₄mim][C₈SO₄]) and 1‐dodecyl‐3‐methylimidazoium chloride ([C₁₂mim]Cl) is described. In addition to detailed structural characterization obtained by using dynamic light scattering, transmission electron microscopy (TEM), and cryogenic TEM techniques, ultrafast fluorescence resonance energy transfer (FRET) from coumarin 153 (C153) as a donor (D) to rhodamine 6G (R6G) as an acceptor (A) is also used to study micelle–vesicle transitions in the present system. Structural transitions of SAIL micelles ([C₄mim][C₈SO₄] or [C₁₂mim]Cl micelles) to mixed SAIL vesicles resulted in significantly increased D –A distances, and therefore, increased timescale of FRET. In [C₄mim][C₈SO₄] micelles, FRET between C153 and R6G occurs on an ultrafast timescale of 3.3 ps, which corresponds to a D –A distance of about 15 Å. As [C₄mim][C₈SO₄] micelles are transformed into mixed micelles upon the addition of a 0.25 molar fraction of [C₁₂mim]Cl, the timescale of FRET increases to 300 ps, which suggests an increase in the D –A distance to 31 Å. At a 0.5 molar fraction of [C₁₂mim]Cl, unilamellar vesicles are formed in which FRET occurs on multiple timescales of about 250 and 2100 ps, which correspond to D –A distances of 33 and 47 Å. Although in micelles and mixed micelles the obtained D –A distances are well correlated with their radius, in vesicles the obtained D –A distance is within the range of the bilayer thickness.     

Development of new chiral ligand exchange capillary electrophoresis system with amino acid ionic liquids ligands and its application in studying the kinetics of l-amino acid oxidase

New kinds of amino acid ionic liquids (AAILs) with pyridinium as cations and l-lysine (l-Lys) as anion have been developed as the available chiral ligands coordinated with Zn(II) in chiral ligand-exchange capillary electrophoresis (CLE-CE). Four kinds of AAILs, including [1-ethylpyridinium][l-lysine], 1-butylpyridinium][l-lysine], [1-hexylpyridinium][l-lysine] and 1-[octylpyridinium][l-lysine], were successfully synthesized and characterized by nuclear magnetic resonance and mass spectrometry. Compared with other AAILs, the best chiral separation of Dns-d, l-amino acids could be achieved when [1-ethylpyridinium][l-lysine] was chosen as the chiral ligand. It has been found that after investigating the influence of key factors on the separation efficiency, such as pH of buffer solution, the ratio of Zn(II) to ligand and complex concentration, eight pairs of Dns-d, l-AAs enantiomers could be baseline separated and three pairs were partly separated under the optimum conditions. The proposed CLE-CE method also exhibited favorable quantitative analysis property of Dns-d, l-Met with good linearity (r² = 0.998) and favorable repeatability (RSD ≤ 1.5%). Furthermore, the CLE-CE system was applied in investigating the kinetic contents of l-amino acid oxidase, which implied that the proposed system has the potential in studying the enzymatic reaction mechanism.     

A three‐dimensional homochiral metal–organic framework constructed from manganese(II) with S‐carboxymethyl‐N‐(p‐tosyl)‐l‐cysteine and 4,4′‐bipyridine

In the chiral polymeric title compound, poly[aqua(4,4′‐bipyridine)[μ₃‐S‐carboxylatomethyl‐N‐(p‐tosyl)‐l ‐cysteinato]manganese(II)], [Mn(C₁₂H₁₃NO₆S₂)(C₁₀H₈N₂)(H₂O)]_n, the Mn^II ion is coordinated in a distorted octahedral geometry by one water molecule, three carboxylate O atoms from three S‐carboxyatomethyl‐N‐(p‐tosyl)‐l ‐cysteinate (Ts‐cmc) ligands and two N atoms from two 4,4′‐bipyridine molecules. Each Ts‐cmc ligand behaves as a chiral μ₃‐linker connecting three Mn^II ions. The two‐dimensional frameworks thus formed are further connected by 4,4′‐bipyridine ligands into a three‐dimensional homochiral metal–organic framework. This is a rare case of a homochiral metal–organic framework with a flexible chiral ligand as linker, and this result demonstrates the important role of noncovalent interactions in stabilizing such assemblies.     

Poly[[diaqua‐μ‐4,4′‐bipyridine‐dinitratodi‐μ‐l‐tyrosinato‐dicopper(II)]: a chiral two‐dimensional coordination polymer

The title compound, [Cu₂(C₉H₁₀NO₃)₂(NO₃)₂(C₁₀H₈N₂)(H₂O)₂]_n, contains Cu^II atoms and l ‐tyrosinate (l ‐tyr) and 4,4′‐bipyridine (4,4′‐bipy) ligands in a 2:2:1 ratio. Each Cu atom is coordinated by one amino N atom and two carboxylate O atoms from two l ‐tyr ligands, one N atom from a 4,4′‐bipy ligand, a monodentate nitrate ion and a water molecule in an elongated octahedral geometry. Adjacent Cu atoms are bridged by the bidentate carboxylate groups into a chain. These chains are further linked by the bridging 4,4′‐bipy ligands, forming an undulated chiral two‐dimensional sheet. O—H...O and N—H...O hydrogen bonds connect the sheets in the [100] direction. This study offers useful information for the engineering of chiral coordination polymers with amino acids and 4,4′‐bipy ligands by considering the ratios of the metal ion and organic components.     

Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF‐TrFE) has been investigated. 1‐ethyl‐3‐methylimidazolium acetate, [C₂mim][OAc], 1‐ethyl‐3‐methylimidazolium triflate, [C₂mim][(CF₃SO₃)], 1‐ethyl‐3‐methylimidazolium lactate, [C₂mim][Lactate], 1‐ethyl‐3‐methylimidazolium thiocyanate, [C₂mim][SNC] and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate [C₂mim][HSO₄] have been used in SPE prepared by solvent casting. The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC]>[CF₃SO₃)]>[HSO₄]>[Lactate]>[OAc], which is mainly dependent on the viscosity of the ionic liquid.     

Temperature‐induced solid‐to‐solid transformation in helical homochiral coordination polymers

The reactions of (R)‐ and (S)‐4‐(1‐carboxyethoxy)benzoic acid (H₂CBA) with 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,3‐BMIB) ligands afforded a pair of homochiral coordination polymers (CPs), namely, poly[[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(S)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] monohydrate], {[Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]·H₂O}_n or {[Zn{(S)‐CBA}(1,3‐BMIB)]·H₂O}_n ( 1‐L ), and poly[[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(R)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] monohydrate] ( 1‐D ). Three kinds of helical chains exist in compounds 1‐D and 1‐L , which are constructed from Zn^II atoms, 1,3‐BMIB ligands and/or CBA^2? ligands. When the as‐synthesized crystals of 1‐L and 1‐D were further heated in the mother liquor or air, poly[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(S)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)], [Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]_n or [Zn{(S)‐CBA}(1,3‐BMIB)]_n ( 2‐L ), and poly[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(R)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] ( 2‐D ) were obtained, respectively. The single‐crystal structure analysis revealed that 2‐L and 2‐D only contained one type of helical chain formed by Zn^II atoms and 1,3‐BMIB and CBA^2? ligands, which indicated that the helical chains were reconstructed though solid‐to‐solid transformation. This result not only means the realization of helical transformation, but also gives a feasible strategy to build homochiral CPs.     

A novel C2 symmetric chiral stationary phase with N‐[(4‐Methylphenyl)sulfonyl]‐l‐leucine as chiral side chains

In this study, a series of chiral stationary phases based on N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine amide, whose enantiorecognition property has never been studied, were synthesized. Their enantioseparation abilities were chromatographically evaluated by 67 enantiomers. The chiral stationary phase derived from N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine showed much better enantioselectivities than that based on N‐(4‐methylbenzoyl)‐l ‐leucine amide. The construction of C₂ symmetric chiral structure greatly improved the enantiorecognition performance of the stationary phase. The C₂ symmetric chiral stationary phase exhibited superior enantioresolutions to other chiral stationary phases for most of the chiral analytes, especially for the chiral analytes with C₂ symmetric structures. By comparing the enantioseparations of the enantiomers with similar structures, the importance of hydrogen bond interaction, π–π interaction, and steric hindrance on enantiorecognition was elucidated. The enantiorecognition mechanism of trans‐N,N′‐(1,2‐diphenyl‐1,2‐ethanediyl)bis‐acetamide, which had an excellent separation factor on the C₂ symmetric chiral stationary phase, was investigated by ¹H‐NMR spectroscopy and 2D ¹H‐¹H nuclear overhauser enhancement spectroscopy.     

Atomic Force Microscopy and X‐Ray Photoelectron Spectroscopy of Lead(II) Membrane Electrode Based on Dithiodibenzoic Acid as Ionophore

The use of 1‐butyl‐3‐methylimidazolium hexafluorophosphate ionic liquid [C₄mim][PF₆] as additive in a Pb(II) plastic membrane electrode increased significantly the selectivity of the sensor. Atomic force microscopy and depth profiling X‐ray photoelectron spectroscopy were applied to investigate the compositional and morphological changes of the surface and bulk of the membrane during the conditioning process of the electrode.     

The ionic parachor and predicting properties of amino acid ionic liquid homologues of 1-alkyl-3-methylimidazolium glycine

The amino acid ionic liquids(AAILs) [C3mim][Gly](1-propyl-3-methylimidazolium glycine) and [C4mim][Gly](1-butyl-3methylimidazolium glycine) have been prepared by the neutralization method and characterized by 1 H NMR spectroscopy and differential scanning calorimetry(DSC).The values of their density,surface tension and refractive index were measured at(298.15 ± 0.05) K.Since the AAILs can form strong hydrogen bonds with water,small amounts of water are difficult to remove from the AAILs by common methods.In order to eliminate the effect of the impurity water,the standard addition method(SAM) was applied to these measurements.A new concept which is called the ionic parachor has been put forward.The [C n mim] + cations were treated as a group of reference ions and the individual values of their ionic parachor were evaluated in terms of an extrathermodynamic assumption.Then,using the values of the ionic parachor of reference ions,the parachor,surface tension γ and refractive index n D of the ionic liquids investigated in this work were estimated.The estimated values correlate quite well with the corresponding experimental values.     

Supramolecular Self‐Assembly of Cucurbit[6]uil and Ionic Liquid in Non‐aqueous System

A novel [2]pseudorotaxane of cucurbit[6]uril(CB[6]) and 1‐butyl‐3‐methyl‐imidazolium bromide ([C₄mim]Br) was synthesized by directly mixing the host and the guest molecules in non‐aqueous system. Structural characterizations of the [2]pseudorotaxane were carried out by 1D, 2D NMR and X‐ray crystallography techniques both in solution and in crystal structure. The crystal structure demonstrated that CB[6] and [C₄mim]Br formed a complex with the ratio 1:1, in which one guest [C₄mim]Br was included inside the CB[6], while two other [C₄mim]Br molecules were free and surrounded the [2]pseudorotaxane as solvent molecules, which could stabilize the crystal structure through hydrogen bonds. Moreover, parallel solvent channels consisting by free [C₄mim]Br molecules occupied the pores among the frame of the pseudorotaxanes and formed zigzag lines in the crystal structure. [C₄mim]Br can serve as not only the guest reactant but also the solvent in the formation of [2]pseudorotaxane formation.     

Enantiomeric and Diastereomeric Self‐Assembled Multivalent Nanostructures: Understanding the Effects of Chirality on Binding to Polyanionic Heparin and DNA

A family of four self‐assembling lipopeptides containing Ala‐Lys peptides attached to a C₁₆ aliphatic chain were synthesised. These compounds form two enantiomeric pairs that bear a diastereomeric relationship to one another (C₁₆‐l ‐Ala‐l ‐Lys/C₁₆‐d ‐Ala‐d ‐Lys) and (C₁₆‐d ‐Ala‐l ‐Lys/C₁₆‐l ‐Ala‐d ‐Lys). These diastereomeric pairs have very different critical micelle concentrations (CMCs). The self‐assembled multivalent (SAMul) systems bind biological polyanions as a result of the cationic lysine groups on their surfaces. For heparin binding, there was no significant enantioselectivity, but there was a binding preference for the diastereomeric assemblies with lower CMCs. Conversely, for DNA binding, there was significant enantioselectivity for systems displaying d ‐lysine ligands, with a further slight preference for attachment to l ‐alanine, with the CMC being irrelevant.     

The surface tension,density and refractive index of amino acid ionic liquids: [C3mim][Gly] and [C4mim][Gly]

The amino acid ionic liquids (AAILs) [C₃mim][Gly] (1-propyl-3-methylimidazolium glycine) and [C₄mim][Gly] (1-butyl-3-methylimidazolium glycine) have been prepared by the neutralization method and characterized by ¹H NMR spectroscopy and differential scanning calorimetry (DSC). The values of their density, surface tension and refractive index were measured at different temperatures. Since the AAILs can form strong hydrogen bonds with water, small amounts of water are difficult to remove from the AAILs by common methods. In order to eliminate the effect of the impurity as water, the standard addition method (SAM) was applied to these measurements. The values of thermal expansion coefficients, α, surface excess energy, E_a, surface excess entropy, S_a, and molar refraction, R_m, for the AAILs were determined.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Luminescent Soft Material: Two New Europium‐Based Ionic Liquids

Two new Eu‐based ionic liquid systems, [C₄mim][DTSA] : [Eu(DTSA)₃] and 2[C₄mim] [DTSA] : [Eu(DTSA)₃] were synthesized at 120° under inert conditions from 1‐butyl‐1‐methylimidazolium ditoluenesulfonylamide ([C₄mim][DTSA]). The identity and purity of the synthesized compounds were confirmed by elemental analysis, IR, Raman, and ¹H‐NMR spectroscopy. As they solidify below 100° as glasses they qualify as ionic liquids. Fluorescence measurements show that the materials exhibit a strong red luminescence of high color purity. Therefore, they have the potential to be used for optical applications such as in emission displays.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

Isolation and purification of alkaloids from the fruits of Macleaya cordata by ionic‐liquid‐modified high‐speed counter‐current chromatography

Macleaya cordata (Willd) R. Br. is a medicinal plant. The most important bioactive compounds of M. cordata are alkaloids that have many biological activities including antifungal, anti‐inflammatory, and antitumor. In this study, an ionic‐liquid‐modified high‐speed counter‐current chromatography method was established to obtain alkaloids from the fruits of M. cordata. The conditions of ionic‐liquid‐modified high‐speed counter‐current chromatography, including solvent systems, the content of ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄]), and the posttreatment of the ionic liquid, were investigated. Five alkaloids protopine, allocryptopine, sanguinarine, 8‐O‐demethylchelerythrine, and chelerythrine were separated from the extract of the fruits using a high speed counter‐current chromatography with two‐phase solvent system composed of dichloromethane/methanol/0.3 mol/L hydrochloric acid aqueous solution/[C₄mim][BF₄] (4:2:2:0.015, v/v). Their purities were 96.33, 95.56, 97.94, 96.22, and 97.90%, respectively. The results indicated that a small amount of ionic liquids as modifier of the two‐phase solvent system could shorten the separation time and improve the separation efficiency of the alkaloids from the fruits. The ionic‐liquid‐modified high‐speed counter‐current chromatography would provide a feasible way for highly effective separation of alkaloids from natural products.     

[C12mim]Br: A Temperature‐dependent Phase Transfer Catalyst and Its Application for Aerobic Oxidative Synthesis of 2‐Aryl Benzimidazoles,Benzoxazoles or Benzothiozoles Catalyzed by TEMPO Based Ionic Liquid

The application of [C₁₂mim]Br ionic liquid/o‐xylene temperature‐dependent biphasic system into the [Imim‐TEMPO][Cl]/O₂‐promoted condensation between o‐phenylenediamines, o‐aminophenol or o‐aminothiophenol with aldehydes for preparing benzimidazoles, benzoxazoles or benzothiozoles is described. Several aldehydes and o‐phenylenediamines, o‐aminophenol or o‐aminothiophenol were reacted efficiently to form corresponding products in excellent yields. Both the [Imim‐TEMPO][Cl] and [C₁₂mim]Br could be reused at least eight times without significantly decreasing the catalytic activity.