Synthesis of Aib‐Pro Oligopeptides by Repeated Azirine Coupling with the Aib‐Pro Synthon

A new synthesis of (Aib‐Pro)_n oligopeptides (n=2, 3, and 4) via azirine coupling by using the dipeptide synthon methyl N‐(2,2‐dimethyl‐2H‐azirin‐3‐yl)‐L ‐prolinate ( 1b ; Fig. 1) is presented. The most important feature of the employed protocol is that no activation of the acid component is necessary, i.e., no additional reagents are required, and the coupling reaction is performed under mild conditions at room temperature. As an attempt to provide an answer to the question of the preferred conformation of the prepared molecules, we carried out experiments by using NMR techniques and X‐ray crystallography. For example, in the case of the hexapeptide 11 , it was possible to compare the conformations in the crystalline state and in solution. After the selective hydrolysis of the methyl ester p‐BrBz‐(Aib‐Pro)₄‐OMe ( 13 ) under basic conditions, the corresponding octapeptide acid was obtained, which was then converted into the octapeptide amide p‐BrBz‐(Aib‐Pro)₄‐NHC₆H₁₃ ( 15 ) by using standard coupling conditions and activating reagents (HOBt/TBTU/DIEA) of the peptide synthesis. The conformation of this compound, as well as those of the tetrapeptides 14 and 18 , was also established by X‐ray crystallography and in solution by NMR techniques. In the crystalline state, a β‐bend ribbon structure is the preferred conformation, and similar conformations are formed in solution.     

The ‘Azirine/Oxazolone Approach’ to the Synthesis of Aib‐Pro Endothiopeptides

The reaction of methyl N‐(2,2‐dimethyl‐2H‐azirin‐3‐yl)‐L ‐prolinate ( 2a ) with thiobenzoic acid at room temperature gave the endothiopeptide Bz‐AibΨ[CS]‐Pro‐OMe ( 7 ) in high yield. In an analogous manner, (benzyloxy)carbonyl (Z)‐protected proline was transformed into the thioacid, which was reacted with 2a to give the endothiotripeptide Z‐Pro‐AibΨ[CS]‐Pro‐OMe ( 12 ). The corresponding thioacid of 7 was prepared in situ via saponification, formation of a mixed anhydride, and treatment with H₂S. A second reaction with 2a led to the endodithiotetrapeptide 9 , but extensive epimerization at Pro² was observed. Similarly, saponification of 12 and coupling with either 2a or H‐Phe‐OMe and 2‐(1H‐benzotriazol‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate/1‐hydroxy‐1H‐benzotriazole (TBTU/HOBt) gave the corresponding endothiopeptides as mixtures of two epimers. The synthesis of the pure diastereoisomer BzΨ[CS]‐Aib‐Pro‐AibΨ[CS]‐N(Me)Ph ( 21 ) was achieved via isomerization of 7 to BzΨ[CS]‐Aib‐Pro‐OMe ( 16 ), transformation into the corresponding thioacid, and reaction with N,2,2‐trimethyl‐N‐phenyl‐2H‐azirin‐3‐amine ( 1a ). The structures of 12 and 21 were established by X‐ray crystallography.     

Synthesis of Poly‐Aib Oligopeptides and Aib‐Containing Peptides via the ‘Azirine/Oxazolone Method’, and Their Crystal Structures

The protected poly‐Aib oligopeptides Z‐(Aib)_n‐N(Me)Ph with n=2–6 were prepared according to the ‘azirine/oxazolone method’, i.e., by coupling amino or peptide acids with 2,2,N‐trimethyl‐N‐phenyl‐2H‐azirin‐3‐amine ( 1a ) as an Aib synthon (Scheme 2). Following the same concept, the segments Z‐(Aib)₃‐OH ( 9 ) and H‐L ‐Pro‐(Aib)₃‐N(Me)Ph ( 20 ) were synthesized, and their subsequent coupling with N,N′‐dicyclohexylcarbodiimide (DCC)/ZnCl₂ led to the protected heptapeptide Z‐(Aib)₃‐L ‐Pro‐(Aib)₃‐N(Me)Ph ( 21 ; Scheme 3). The crystal structures of the poly‐Aib oligopeptide amides were established by X‐ray crystallography confirming the 3₁₀‐helical conformation of Aib peptides.     

The peptide (Z)‐Pro–Leuol

The structure of the synthetic protected dipeptide (Z)‐Pro–Leuol [systematic name: benzyl 2‐(1‐hydroxy­methyl‐3‐methyl­butyl­amino­carbonyl)­pyrrolidine‐1‐carboxyl­ate], C₁₉H₂₈N₂O₄, was determined by X‐ray crystallography. The peptide adopts a novel backbone conformation compared with other longer oligopeptides containing Pro–Leuol.     

Construction of Four Coordination Polymers based on 2‐[4‐(Pyridine‐4‐yl)phenyl]‐1H‐imidazole‐4,5‐dicarboxylic Acid

The imidazole‐based dicarboxylate ligand 2‐(4‐(pyridin‐4‐yl)phenyl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PyPhIDC), was synthesized and its coordination chemistry was studied. Solvothermal reactions of Ca^II, Mn^II, Co^II, and Ni^II ions with H₃PyPhIDC produced four coordination polymers, [Ca(μ₃‐HPyPhIDC)(H₂O)₂]_n ( 1 ), {[M₃(μ₂‐H₂PyPhIDC)₂(μ₃‐HPyPhIDC)₂₆(H₂O)₂] · 6H₂O}_n [M = Mn ( 2 ), Co ( 3 )], and {[Ni(μ₃‐HPyPhIDC)(H₂O)] · H₂O}_n ( 4 ). Compounds 1 – 4 were analyzed by IR spectroscopy, elemental analyses, and single‐crystal and powder X‐ray diffraction. Compound 1 displays a one‐dimensional (1D) infinite chain. Compounds 2 and 3 are of similar structure, showing 2D network structures with a (4,4) topology based on trinuclear clusters. Compound 4 has another type of 2D network structure with a 3‐connected (4.8²) topology. The results revealed that the structural diversity is attributed to the coordination numbers and geometries of metal ions as well as the coordination modes and conformations of H₃PyPhIDC. Moreover, the thermogravimetric analyses of all the compounds as well as luminescence properties of the H₃PyPhIDC ligand and compound 1 were also studied.     

Synthesis and characterization of di‐n‐butyltin(IV) complexes with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids: X‐ray crystal structures of [{(n‐C4H9)2Sn(OCOC12H8NO2−4′)}2O]2 and (n‐C4H9)2Sn{OCOC12H8NO2−4′}2

Reactions of di‐n‐butyltin(IV) oxide with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids in 1 : 1 and 1 : 2 stoichiometry yield complexes [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)}₂O]₂ ( 1 and 2 ) and (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)₂ ( 3 and 4 ) respectively. These compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy. The IR spectra of these compounds indicate the presence of anisobidentate carboxylate groups and non‐linear C? Sn? C bonds. From the chemical shifts δ (¹¹⁹Sn) and the coupling constants ¹J(¹³C, ¹¹⁹Sn), the coordination number of the tin atom and the geometry of its coordination sphere have been suggested. [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)}₂O]₂ ( 1 ) exhibits a dimeric structure containing distannoxane units with two types of tin atom with essentially identical geometry. To a first approximation, the tin atoms appear to be pentacoordinated with distorted trigonal bipyramidal geometry. However, each type of tin atom is further subjected to a sixth weaker interaction and may be described as having a capped trigonal bipyramidal structure. The diffraction study of the complex (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)₂ ( 3 ) shows a six–coordinate tin in a distorted octahedral frame containing bidentate asymmetric chelating carboxylate groups, with the n‐Bu groups trans to each other. The n‐Bu? Sn? n‐Bu angle is 152.8° and the Sn? O distances are 2.108(4) and 2.493(5) Å. The oxygen atom of the nitro group of the ligand does not participate in bonding to the tin atom in 1 and 3 . Crystals of 1 are triclinic with space group P1 and of that of 3 have orthorhombic space group Pnna. Copyright © 2003 John Wiley & Sons, Ltd.     

Novel immonium type peptide coupling reagent: 5‐(1H‐benzotriazol‐1‐yloxy)‐3,4‐dihydro‐1‐methyl 2H‐pyrrolium hexachloroantimonate (BDMP® )

A novel immonium type coupling reagent, 5‐(1H‐benzotriazol‐1‐yloxy)‐3,4‐dihydro‐1‐methyl 2H‐pyrrolium hexachloroantimonate (BDMP) has been designed, synthesized and utilized to synthesize oligopeptides and biologically active peptide both in solution and solid phase with satisfactory yield, low racemization and fast reaction rate. The estimation of racemization and the influence of several reaction parameters were studied by HPLC method using the model reaction: Z‐Gly‐Phe‐OH + Val‐OMe·HCl·Z‐Gly‐D/L‐Phe‐Val‐OMe. It was shown that the reactivity of BDMP was much higher and the racemization was much lower than those of HOBt‐based ‘onium’ reagents, even though its analogues BOMI. To further verified me effectiveness of BDMP, Leu‐enkephalin was synthesized both in solution and solid phase using BDMP as coupling reagent. The proposed mechanism was also speculated.     

Tuning the energy level of TAPC: crystal structure and photophysical and electrochemical properties of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline]

The energy level of a hole‐transporting material (HTM) in organic electronics, such as organic light‐emitting diodes (OLEDs) and perovskite solar cells (PSCs), is important for device efficiency. In this regard, we prepared 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline] ( TAPC‐OMe ), C₄₆H₄₆N₂O₄, to tune the energy level of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methylphenyl)aniline] ( TAPC ), which is a well‐known HTM commonly used in OLED applications. A systematic characterization of TAPC‐OMe , including ¹H and ¹³C NMR, elemental analysis, UV–Vis absorption, fluorescence emission, density functional theory (DFT) calculations and single‐crystal X‐ray diffraction, was performed. TAPC‐OMe crystallized in the triclinic space group P, with two molecules in the asymmetric unit. The dihedral angles between the central amine triangular planes and those of the phenyl groups varied from 26.56 (9) to 60.34 (8)° due to the steric hindrance of the central cyclohexyl ring. This arrangement might be induced by weak hydrogen bonds and C—H…π(Ph) interactions in the extended structure. The emission maxima of TAPC‐OMe showed a significant bathochomic shift compared to that of TAPC . A strong dependency of the oxidation potentials on the nature of the electron‐donating ability of substituents was confirmed by comparing oxidation potentials with known Hammett parameters (σ).     

Synthesis and Spectroscopic Characterization of Potassium Polyfluoroalken‐1‐yltrifluoroborates

The potassium fluoroborates K[RCF=CFBF₃] (R = F, Cl (cis‐/trans‐mixture), trans‐C₄F₉, cis‐C₂F₅, cis‐C₆F₁₃, trans‐C₄H₉, trans‐C₆H₅) were prepared by fluoridation (methoxide‐fluoride substitution with K[HF₂]) of RCF=CFB(OMe)₂ and Li[RCF=CFB(OMe)₃] which were obtained from RCF=CFLi and B(OMe)₃. The K[RCF=CFBF₃] salts were characterized by their ¹H, ¹¹B, ¹⁹F NMR and IR spectra.     

Polymorphism of 2,5‐[(diphenylphosphanyl)methyl]‐1,1,2,4,4,5‐hexaphenyl‐1,4‐diphospha‐2,5‐diboracyclohexane

2,5‐[(Diphenylphosphanyl)methyl]‐1,1,2,4,4,5‐hexaphenyl‐1,4‐diphospha‐2,5‐diboracyclohexane shows polymorphism as two tetrahydrofuran (THF) disolvates [C₆₄H₅₈B₂P₄·2C₄H₈O, (Ia) and (Ib)] and pseudo‐polymorphism as its toluene monosolvate [C₆₄H₅₈B₂P₄·C₇H₈, (Ic)]. In each of polymorphs (Ia) and (Ib), the diphosphadiboracyclohexane molecule is located on a centre of inversion. The THF molecule of (Ib) is disordered over two sites, with a site‐occupation factor of 0.612 (8) for the major‐occupied site. Both structures crystallize in the same space group (P2₁/n), but they display a different crystal packing. For pseudo‐polymorph (Ic), although the space group is P2₁/c, which is just a different setting of the P2₁/n space group of (Ia) and (Ib), the crystal packing is completely different. Although the crystal packing in these three structures is significantly different, their molecular conformations are surprisingly the same.     

Assembled synthesis of luminescent mono/double‐layered 2D and 3D Zn (II)‐based coordination polymers tuned by flexible bis (pyridyl)propane‐1,2‐diamines and diverse organic dicarboxylates

Six mono/double‐layered 2D and three 3D coordination polymers were synthesized by a self‐assembly reaction of Zn (II) salts, organic dicarboxylic acids and L1/L2 ligands. These polymeric formulas are named as [Zn(L1)(C₄H₂O₄)_0.5 (H₂O)]_n·0.5n(C₄H₂O₄)·2nH₂O ( 1 ), [Zn₂(L2)(C₄H₂O₄)₂]_n·2nH₂O ( 2 ), [Zn(L1)(m‐BDC)]_n ( 3 ), [Zn₂(L2)(m‐BDC)₂]_n·2nH₂O ( 4 ), [Zn₃(L1)₂(p‐BDC)₃(H₂O)₄]_n·2nH₂O ( 5 ), [Zn₂(OH)(L2) (p‐BDC)_1.5]_n ( 6 ), [Zn₂(L1)(p‐BDC)₂]_n·5nH₂O ( 7 ), [Zn₂(L2)(p‐BDC)₂]_n·3nH₂O ( 8 ) and [Zn₂(L1)(C₄H₄O₄)_1.5(H₂O)]_n·n(ClO₄)·nH₂O ( 9 ) [L1 = N,N′‐bis (pyridin‐4‐ylmethyl)propane‐1,2‐diamine, L2 = N,N′‐bis (pyridin‐3‐ylmethyl)propane‐1,2‐ diamine, m‐BDC^2? = m‐benzene dicarboxylate, p‐BDC^2? = p‐benzene dicarboxylate]. Meanwhile, these polymers have been characterized by elemental analysis, infrared, thermogravimetry (TG), photoluminescence, powder and single‐crystal X‐ray diffraction. Polymers 1–6 present mono‐ and double (4,4)‐layer motifs accomplished by L1/L2 ligands with diverse conformations and organic dicarboxylates, and the layer thickness locates in the range of 5.8–15.0 Å. In three 3D polymers, the L1 and L2 molecules adopt the same cis‐conformations and join adjacent Zn (II) cations together with p‐BDC^2? or succinate, giving rise to different binodal (4,4)‐c nets with (4.5².8³)(4.5³.7²) ( 7 ), pts ( 8 ) topology and twofold interpenetrated binodal (5,5)‐c nets with (3².4⁴.5².6²)(3.4³.5².6⁴) ( 9 ). Therefore, the diverse conformations of the two bis (pyridyl)‐propane‐1,2‐diamines and the feature of different organic dicarboxylate can effectively influence the architectures of these polymers. Powder X‐ray diffraction patterns demonstrate that these bulk solid polymers are pure phase. TG analyses indicate that these polymers have certain thermal stability. Luminescent investigation reveals that the emission maximum of these polymers varies from 402 to 449 nm in the solid state at room temperature. Moreover, 1 , 3 and 5–8 show average luminescence lifetimes from 8.81 to 16.30 ns.     

Synthesis and Characterization of New 3‐(3‐Hydroxyphenyl)‐4‐ alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione Compounds

A series of 3‐(3‐hydroxyphenyl)‐4‐alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione compounds with general formula C_nH_2n+1CNO(CO)₂C₆H₄(C₆H₄OH) in which n are even parity numbers from 2 to 18. The structure determinations on these compounds were performed by FT‐IR spectroscopy which indicated that the terminal alkyl chain attached to the oxazepine ring was fully extended. Conformational analysis in DMSO at ambient temperature was carried out for the first time via high resolution ¹H NMR and ¹³C NMR spectroscopy.     

A new two‐dimensional ZnII coordination polymer based on 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene and 5‐nitrobenzene‐1,3‐dicarboxylic acid: synthesis,crystal structure and physical properties

A novel two‐dimensional (2D) Zn^II coordination framework, poly[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene](μ‐5‐nitrobenzene‐1,3‐dicarboxylato)zinc(II)], [Zn(C₈H₃NO₆)(C₁₄H₁₄N₄)]_n or [Zn(NO₂‐BDC)(1,3‐BMIB)]_n [1,3‐BMIB is 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene and NO₂‐H₂BDC is 5‐nitrobenzene‐1,3‐dicarboxylic acid], has been prepared and characterized by IR, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Single‐crystal X‐ray diffraction analysis revealed that the compound is a new 2D polymer with a 6³ topology parallel to the (10) crystal planes based on left‐handed helices, right‐handed helical NO₂‐BDC–Zn chains and [Zn₂(1,3‐BMIB)₂]_n clusters. In the crystal, adjacent layers are further connected by C—H…O hydrogen bonds, C—H…π interactions, C—O…π interactions and N—O…π interactions to form a three‐dimensional structure in the solid state. In addition, the compound exhibits strong fluorescence emissions in the solid state at room temperature.     

Synthesis,Structure, and Magnetic Properties of a Copper(II) Metal‐Organic Framework with Biphenyl‐2,2′,4,4′‐tetracarboxylic Acid

The 2D Cu^II metal‐organic framework [Cu₂(bptc)(H₂O)₄]_n · 4nH₂O ( 1 ) (H₄bptc = biphenyl‐2,2′,4,4′‐tetracarboxylic acid) was hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction and magnetic measurements. In the structure, bptc^4– serves as a twisted Π‐shaped organic building block to connect paddlewheel [Cu₂(COO)₄] dinuclear units and mononuclear units through 2‐/2′‐carboxylate and 4‐/4′‐carboxylate, respectively. According to the magnetic analysis using a dimer‐plus‐monomer model, strong antiferromagnetic coupling is operative within the dinuclear unit (J = –311 cm^–1 based on H = –J S ₁ S ₂), and the compound behaves like a mononuclear molecule at low temperature.     

Difunctionalized {closo‐1‐CB11} Clusters: 1‐ and 2‐Amino‐12‐ethynylcarba‐closo‐dodecaborates

Carba‐closo‐dodecaborate anions with two functional groups have been synthesized via a simple two‐step procedure starting from monoamino‐functionalized {closo‐1‐CB₁₁} clusters. Iodination at the antipodal boron atom provided access to [1‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 1 a ) and [2‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 2 a ), which have been transformed into the anions [1‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 1 b ), Ph ( 1 c ), Et₃Si ( 1 d )) and [2‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 2 b ), Ph ( 2 c ), Et₃Si ( 2 d )) by microwave‐assisted Kumada‐type cross‐coupling reactions. The syntheses of the inner salts 1‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 1 e ), Et₃Si ( 1 f )) and 2‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 2 e ), Et₃Si ( 2 f )) are the first examples for a further derivatization of the new anions. All {closo‐1‐CB₁₁} clusters have been characterized by multinuclear NMR and vibrational spectroscopy as well as by mass spectrometry. The crystal structures of Cs 1 a , [Et₄N] 2 a , K 1 b , [Et₄N] 1 c , [Et₄N] 2 c , 1 e , and [Et₄N][1‐H₂N‐2‐F‐12‐I‐closo‐1‐CB₁₁H₉]?0.5 H₂O ([Et₄N ]4 a ?0.5 H₂O) have been determined. Experimental spectroscopic data and especially spectroscopic data and bond properties derived from DFT calculations provide some information on the importance of inductive and resonance‐type effects for the transfer of electronic effects through the {closo‐1‐CB₁₁} cage.     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Co‐MOFs Containing Flexible α,ω‐Alkane‐dicarboxylates and Bis(imidazole) Ligands: Synthesis,Structure, and Properties

Three structurally related flexible bis(imidazole) ligands reacted with Co(NO₃)₂ · 6H₂O and succinic acid (L₁) to yield three new metal‐organic frameworks {[Co(L₁)(L₂)] · (H₂O)}_n ( 1 ) [L₂ = 2‐bis(imidazol‐1‐yl)ethane], {[Co(L₁)(L₃)](H₂O)}_n ( 2 ) [L₃ = 1,4‐bis(imidazol‐1‐yl) butane], and {[Co(L₁)(L₄)] · (H₂O)}_n ( 3 ) [L₄ = 1,4‐bis(2‐methyl‐imidazol‐1‐yl)butane], respectively. These complexes were synthesized under solvothermal conditions and characterized by elemental analysis, IR spectroscopy, single‐crystal and powder X‐ray diffraction, as well as thermal analyses. Interestingly, the ligands in these complexes exhibit different conformations and further cause three different configurations. Complex 1 shows a three‐dimensional (3D) framework, which is connected by two‐dimensional (2D) layer structures through hydrogen bonds. Complex 2 is a diamond structure with threefold interpenetration. Complex 3 is a 3D framework linked by hydrogen bonds like complex 1 .     

Exaltone® (=Cyclopentadecanone) from Isomuscone® (=Cyclohexadecanone), a One‐C‐Atom Ring‐Contraction Methodology via a Stereospecific Favorskii Rearrangement: Regioselective Application to (−)‐(R)‐Muscone

Treatment of cyclohexadecanone ( 1g ; with I₂ (2.2 mol‐euqiv.) and KOH in MeOH) furnished the unsaturated (Z)‐ester 2g in 83% yield, via a stereospecific Favorskii rearrangement (Scheme 1). Further treatment with 3‐chloroperbenzoic acid (m‐CPBA) afforded the unreported epoxy ester 3g (88% yield), which was cleaved in 33% yield to Exaltone^® (=cyclopentadecanone; 1f ) with NaOH in MeOH/H₂O and then HCl at 65°. This methodology was similarly extended to higher (C₁₇) and lower (C₁₅ to C₁₁) cyclic ketone analogues, as well as regioselectively to (?)‐(R)‐muscone ( 5c ) and homomuscone ( 5f ) (Scheme 2). Olfactive properties of the corresponding macrocyclic 1‐oxaspiro[2,n]alkanes and ‐alkenes 4 and 8 , resulting from a Corey? Chaykovsky oxiranylation, are also presented.     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

A new route for the synthesis of phosphate esters: 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide

Podand‐type ligands are an interesting class of acyclic ligands which can form host–guest complexes with many transition metals and can undergo conformational changes. Organic phosphates are components of many biological molecules. A new route for the synthesis of phosphate esters with a retained six‐membered ring has been used to prepare 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, C₆H₄{O[cyclo‐P(O)OCH₂CMe₂CH₂O]}₂ or C₁₆H₂₄O₈P₂, (1), 2‐[(2′‐hydroxybiphenyl‐2‐yl)oxy]‐5,5‐dimethyl‐1,3,2‐dioxaphosphinane 2‐oxide, [cyclo‐P(O)OCH₂CMe₂CH₂O](2,2′‐OC₆H₄–C₆H₄OH), (2), and oxybis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, O[cyclo‐P(O)OCH₂CMe₂CH₂O]₂, (3). Compound (1) is novel, whereas the results for compounds (2) and (3) have been reported previously, but we record here our results for compound (3), which we find are more precise and accurate than those currently reported in the literature. In (1), two cyclo‐P(O)OCH₂CMe₂CH₂O groups are linked through a catechol group. The conformations about the two catechol O atoms are quite different, viz. one C—C—O—P torsion angle is −169.11 (11)° and indicates a trans arrangement, whereas the other C—C—O—P torsion angle is 92.48 (16)°, showing a gauche conformation. Both six‐membered POCCCO rings have good chair‐shape conformations. In both the trans and gauche conformations, the catechol O atoms are in the axial sites and the short P=O bonds are equatorially bound.