Synthesis,Spectral, and Electrochemical Properties of meso‐5,10,15,20‐Tetrakis (2′‐chlorobenzoquinolin‐3′‐yl)porphyrins

The synthesis, characterization, and redox and spectral properties of the meso‐5,10,15,20‐tetrakis(2′‐chlorobenzoquinolin‐3′‐yl)porphyrin are reported. The synthesis of the porphyrin was performed by following the modified Lindsey procedure, and its zinc(II) derivative was prepared by using the conventional method. The electronic properties of the compound were investigated by cyclic voltammetry and spectroscopy. This compound shows unusual redox behavior with difficulty in oxidation and ease of reduction compared to tetraphenylporphyrin.     

β‐Functionalized meso Tetrahalothien‐2‐ylporphyrins: Synthesis,Spectral, and Electrochemical Properties

Two types of β‐ functionalized (mono nitrated and perbrominated) meso tetrakis(5‐halothien‐;2‐yl)porphyrins, which can be used as precursors for the synthesis of other asymmetric and highly substituted porphyrins, have been synthesised and characterized. Introduction of a nitro group at the β‐ position shifted soret band 11–16 nm to the red region and redox potentials to > 170 mV for oxidation and > 250 mV for reduction anodically. Perbromination of halothienylporphyrins lead to enhanced bathochromically shifted uv‐visible spectral bands, but had only marginal influence on oxidation potentials. Effect of mono nitro group and eight bromo groups on the electronic properties of the porphyrins is attributed, respectively to, the electron deficiency created in the porphyrin π‐ system and the nonplanar conformation induced by the bulky bromo groups.     

Synthesis of N,N,N-4,4＂-Di-（4-methylphenyl）-2,2＇：6＇,2＂- terpyridine-N,N,N-tris（isothiocyanato） Ruthenium（Ⅱ） and Application to Colorimetric Hg^2＋ Sensor

A terpyridine derivative DPTP [di-（4-methylphenyl）-2,2＇：6＇,2＂-terpyridine] was conveniently synthesized from 2-bromopyridine via halogen-dance reaction, Kharash coupling and Stille coupling reaction. Then its corresponding ruthenium complex Ru-DPTP [N,N,N-4,4＇＇-di-（4-methy,phenyl）-2,2＇：6＇,2＂-terpyridine-N,N,N-tris（is,-thi,cyanat,）- ruthenium（H） ammonium] was obtained and fully characterized by IR, UV-Vis, ESI MS and elemental analysis. The MLCT absorption band of Ru-DPTP was blue-shifted from 570 to 500 nm upon addition of Hg^2＋. Among a series of surveyed metal ions, the complex showed a unique recognition to Hg^2＋, indicating that it can be used as a selective colorimetric sensor for Hg^2＋.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

Direct Electrochemistry of Glucose Oxidase Immobilized at a Novel Composite Material β‐Cyclodextrin/poly(4‐aminothiophenol)/Au Nanoparticle Modified Electrode

A novel complex material was fabricated by three steps. In the first step, gold nanoparticle (Au_nano) was prepared with the method of chemistry and dialysis. In the second step, 4‐aminothiophenol (AT) was encapsulated in the cavity of β‐cyclodextrin and formed inclusion complex, cyclodextrin/4‐aminothiophenol (CD/AT). And then inclusion complex was adsorbed to the surface of Au_nano based on the bond of Au‐S interaction. In the last step, a complex material, cyclodextrin/poly(4‐aminothiophenol)‐Au nanoparticles (CD/PAT‐Au_nano) was obtained by the polymerizing in the acid solution initiated by chlorauric acid. The CD/PAT‐Au_nano has spherical nanostructure with the average diameter of 55 nm. Glucose oxidase (GOx) was anchored with this complex material and direct electrochemistry of GOx was achieved. A couple of stable and well‐defined redox peaks were observed with the formal potential (E^0′) of ‐0.488 V (vs. SCE) in a pH 6.98 buffer solution. The GOx modified electrode also exhibited an excellent electrocatalytic activity to the reduction of glucose, a linearity range for determination of glucose is from 0.25 mM to 16.0 mM with a detection limit of 0.09 mM (S/N = 3). This protocol had potential application to fabricate the third‐generation biosensor.     

Voltammetric Characterization of Redox‐Inactive Guest Binding to LnIII[15‐Metallacrown‐5] Hosts Based on Competition with a Redox Probe

A novel competitive binding assay was implemented to monitor the binding of a redox inactive substrate to a redox inactive metallacrown host based on its competition with ferrocene carboxylate (FcC^?) using cyclic voltammetry (CV). First, the binding of FcC^? to Ln^III[15‐MC‐5] (LnMC) hosts was characterized by cyclic voltammetry. It was shown that the voltammetric half wave potentials, E_1/2, shifted to more positive potentials upon the addition of LnMC. The explicit dependence of E_1/2 with the concentration of LnMC was used to determine the association constants for the complex. The FcC^? binding strength decreased with larger central lanthanide metals in the LnMC hosts, and substantially weaker binding was observed with La^III. X‐ray crystallography revealed that the hydrophobic host cavity incompletely encapsulated FcC^? when the guest was bound to the nine‐coordinate La^III, suggesting the LnMC’s ligand side chains play a substantial role in guest recognition. With knowledge of the MC‐FcC^? solution thermodynamics, the binding affinity of a redox inactive guest was then assessed. Addition of sodium benzoate to a LnMC and FcC^? mixture resulted in E_1/2 shifting back to the value observed for FcC^? in the absence of LnMC. The association constants between benzoate and LnMC’s were calculated via the competitive binding approach. Comparison with literature values suggests this novel assay is a viable method for determining association constants for host–guest systems that exhibit the proper electrochemical behavior. Notably, this CV competitive binding approach does not require the preparation of a modified electrode or a tethered guest, and thus can be generalized to a number of host–guest systems.     

Redox Reaction of the Pd0 Complex Bearing the Trost Ligand with meso‐Cycloalkene‐1,4‐biscarbonates Leading to a Diamidato PdII Complex and 1,3‐Cycloalkadienes: Enantioselective Desymmetrization Versus Catalyst Deactivation

The Pd⁰ complex 1 that bears the Trost ligand 2 undergoes a facile redox reaction with 1,4‐biscarbonates 5 b – d and rac‐ 22 under formation of the diamidato–Pd^II complex 7 and the corresponding 1,3‐cycloalkadienes 8 b – d . The redox deactivation of complex 1 was the dominating pathway in the reaction of 5 b – d with HCO₃^? at room temperature. However, at 0 °C the six‐membered biscarbonate 5 b , catalytic amounts of complex 1 , and HCO₃^? mainly reacted in an allylic alkylation, which led to a highly selective desymmetrization of the substrate and gave alcohol 6 b with ≥99 % ee in 66 % yield. An increase of the catalyst loading in the reaction of 5 b with 1 and HCO₃^? afforded the bicyclic carbonate 12 b (96 % ee, 92 %). Formation of carbonate 12 b involves two consecutive inter‐ and intramolecular substitution reactions of the π‐allyl–Pd^II complexes 16 b and 18 b , respectively, with O‐nucleophiles and presumably proceeds through the hydrogen carbonate 17 b as key intermediate. The intermediate formation of 17 b is also indicated by the conversion of alcohol rac‐ 6 b to carbonate 12 b upon treatment with HCO₃^? and 1 . The Pd⁰‐catalyzed desymmetrization of 5 b with formation of 12 b and its hydrolysis allow an efficient enantioselective synthesis of diol 13 b . The reaction of the seven‐membered biscarbonate 5 c with ent‐ 1 and HCO₃^? afforded carbonate ent‐ 12 c (99 % ee, 39 %). The Pd⁰ complex 1 is stable in solution and suffers no intramolecular redox reaction with formation of complex 7 and dihydrogen as recently claimed for the similar Pd⁰ complex 9 . Instead, complex 1 is rapidly oxidized by dioxygen to give the stable Pd^II complex 7 . Thus, formation of the Pd^II complex 10 from 9 was most likely due to an oxidation by dioxygen. Oxidative workup (air) of the reaction mixture stemming from the desymmetrization of 5 c catalyzed by 1 gave the Pd^II complex 7 in high yield besides carbonate 12 c .     

Detection of α‐Methylacyl‐CoA Racemase in Serum and Urine Using a Highly Sensitive Electrochemical Immunodetector

The detection of α‐methylacyl‐CoA racemase (AMACR), a novel biomarker for prostate cancer, is demonstrated in serum and urine using a novel immuno‐detection method. The detection system consists of a three‐electrode conventional electrochemical cell modified with a gating electrode for applying a gating voltage V_G to the immune complex immobilized on the working electrode to provide signal amplification. The detection system is realized by integrating gating electrodes with screen‐printed electrodes. This detection method does not require involved sample preparation procedures. The detection was demonstrated in serum and urine samples on the nanogram/mL level with V_G equal to 0.6 V. Detection in serum was also performed on the picogram/mL level with a limit of 100 picogram/mL with V_G=0.6 V being a necessary condition.     

Discriminating Influence of α‐ and Methylated β‐Cyclodextrins on Complexation and Polymerization of Diacrylate and Dimethacrylate Monomers

Summary: Host‐guest complexes of α‐cyclodextrin (α‐CD) and methylated β‐cyclodextrin (Me‐β‐CD) with diacrylates and dimethacrylates of butan‐1,4‐diol and hexan‐1,6‐diol at varying stoichiometries were studied. The complexes were analyzed by means of ¹H NMR, two‐dimensional ROESY spectroscopy and Job's curves, which clearly revealed the discriminating influence of the two hosts towards complex formation. The corresponding polymers were obtained using a redox initiator system in water. Thermal analysis and IR measurements of the polymers provided evidence for the existence of a polyrotaxane architecture.

Proposed structure of the cross‐linked polymers obtained by the redox polymerization of the Me‐β‐CD complexed monomers.     

Superior Electron‐Transport Ability of π‐Conjugated Redox Molecular Wires Prepared by the Stepwise Coordination Method on a Surface

Electronic conductivity of molecular wires is a critical fundamental issue in molecular electronics. π‐Conjugated redox molecular wires with the superior long‐range electron‐transport ability could be constructed on a gold surface through the stepwise ligand–metal coordination method. The β^d value, indicating the degree of decrease in the electron‐transfer rate constant with distance along the molecular wire between the electrode and the redox active species at the terminal of the wire, were 0.008–0.07 Å^?1 and 0.002–0.004 Å^?1 for molecular wires of bis(terpyridine)iron and bis(terpyridine)cobalt complex oligomers, respectively. The influences on β^d by the chemical structure of molecular wires and the terminal redox units, temperature, electric field, and electrolyte concentration were clarified. The results indicate that facile sequential electron hopping between neighboring metal–complex units within the wire is responsible for the high electron‐transport ability.     

Electrochemical Investigation of Na‐Salt of 2‐Methyl‐3‐(4‐nitrophenyl)acrylate on Glassy Carbon Electrode

The electrochemical behavior of Na‐salt of 2‐methyl‐3‐(4‐nitrophenyl)acrylate (NPA) and its reduction product was studied by cyclic (CV), differential pulse(DPV) and square wave voltammetry (SWV) using a glassy carbon electrode (GCE). The results revealed that NPA is irreversibly reduced leading to the formation of a reduction product (P_NPA). For pH<9.0 the peak potential was linearly dependent on pH. For pH>9.0 the peak potential was pH‐independent and the value of pK_b≈9.0 was determined. The adsorbed P_NPA exhibited reversible redox reaction. The reduction of P_NPA was pH dependent. To ensure that the electrochemical behavior of NPA is due to the reducible moiety, NO₂, closely related compounds to NPA were also studied, and a redox mechanism was proposed for NPA.     

2‐Amino‐8‐(2‐deoxy‐2‐fluoro‐β‐D‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one: Synthesis and Conformation of a 5‐Aza‐7‐deazaguanine Fluoronucleoside

Nucleobase‐anion glycosylation of 2‐[(2‐methyl‐1‐oxopropyl)amino]imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one ( 6 ) with 3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐α‐D ‐arabinofuranosyl bromide ( 8 ) furnishes a mixture of the benzoyl‐protected anomeric 2‐amino‐8‐(2‐deoxy‐2‐fluoro‐D ‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐ones 9 / 10 in a ratio of ca. 1 : 1. After deprotection, the inseparable anomeric mixture 3 / 4 was silylated. The obtained 5‐O‐[(1,1‐dimethylethyl)diphenylsilyl] derivatives 11 and 12 were separated and desilylated affording the nucleoside 3 and its α‐D anomer 4 . Similar to 2′‐deoxy‐2′‐fluoroarabinoguanosine, the conformation of the sugar moiety is shifted from S towards N by the fluoro substituent in arabino configuration.     

Detection and structural features of the βB2‐B3‐crystallin heterodimer by radical probe mass spectrometry (RP‐MS)

The predilection of the β‐crystallin B2 subunit to interact with the βB3 subunit rather than self associate is evident by the detection of the βB2‐B3‐crystallin heterodimer by native gel electrophoresis and electrospray ionisation time‐of‐flight (ESI‐TOF) mass spectrometry under non denaturing conditions. The complex has been detected for the first time and its molecular mass is measured to be 47 450 ± 1 Da. Radical probe mass spectrometry (RP‐MS) was subsequently applied to investigate the nature of the heterodimer through the limited oxidation of the subunits in the complex. Two peptide segments of the βB2 subunit and six of the βB3 subunit were found to oxidise, with far greater oxidation observed within the βB3 versus the βB2 subunit. This, and the observation that the oxidation data of βB2 subunit is inconsistent with the structure of the βB2 monomer, demonstrates that the protection of βB2 is conferred by its association with βB3 subunit within the heterodimer where only the residues of, and towards, its N‐terminal domain remain exposed to solvent. The results suggest that the βB2 subunit adopts a more compacted form than in its monomeric form in order for much of its structure to be enveloped by the βB3 subunit within the heterodimer. Copyright © 2009 John Wiley & Sons, Ltd.     

Methylene Blue as a Photosensitizer and Redox Agent: Synthesis of 5‐Hydroxy‐1H‐pyrrol‐2(5H)‐ones from Furans

A highly efficient and general singlet‐oxygen‐initiated one‐pot transformation of readily accessible furans into 5‐hydroxy‐1H‐pyrrol‐2(5H)‐ones has been developed. The methodology was extended to the synthesis of other high‐value α,β‐unsaturated γ‐lactams. This useful set of transformations relies not only on the photosensitizing ability of methylene blue, but also on its redox properties: properties that have until now been virtually ignored in a synthetic context.     

Investigation of the Catalytic Activity of a 2‐Phenylidenepyridine Palladium(II) Complex Bearing 4,5‐Dicyano‐1,3‐bis(mesityl)imidazol‐2‐ylidene in the Mizoroki‐Heck Reaction

The phenylidenepyridine (ppy) palladacycles [PdCl(ppy)(IMes)] ( 4 ) [IMes = 1,3‐bis(mesityl)imidazol‐2‐ylidene] and [PdCl(ppy){(CN)₂IMes}] ( 6 ) [(CN)₂IMes = 4,5‐dicyano‐1,3‐bis(mesityl)imidazol‐2‐ylidene] were prepared by facile two step syntheses, starting with the reaction of palladium(II) chloride with 2‐phenylpyridine followed by subsequent addition of the NHC ligand to the precatalyst precursor [PdCl(ppy)]₂. Suitable crystals for the X‐ray analysis of the complexes 4 and 6 were obtained. It was shown that 6 has a shorter NHC‐palladium bond than the IMes complex 4 . The difference of the palladium carbene bond lengths based on the higher π‐acceptor strength of (CN)₂IMes in comparison to IMes. Thus, (CN)₂IMes should stabilize the catalytically active central palladium atom better than IMes. As a measure for the π‐acceptor strength of (CN)₂IMes compared to IMes, the selone (CN)₂IMes · Se ( 7 ) was prepared and characterized by ⁷⁷Se‐NMR spectroscopy. The π‐acceptor strength of 7 was illuminated by the shift of its ⁷⁷Se‐NMR signal. The ⁷⁷Se‐NMR signal of 7 was shifted to much higher frequencies than the ⁷⁷Se‐NMR signal of IMes · Se. Catalytic experiments using the Mizoroki‐Heck reaction of aryl chlorides with n‐butyl acrylate showed that 6 is the superior performer in comparison to 4 . Using complex 6 , an extensive substrate screening of 26 different aryl bromides with n‐butyl acrylate was performed. Complex 6 is a suitable precatalyst for para‐substituted aryl bromides. The catalytically active species was identified by mercury poisoning experiments to be palladium nanoparticles.     

Enhanced redox stability and electrochromic properties of aromatic polyamides based on N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new bis(triphenylamine)‐type dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was prepared by a well‐established procedure and led to a new family of redox‐active aromatic polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenylphenylenediamine (TPPA) segments. The resulting polyamides were amorphous with good solubility in many organic solvents, and most of them could be solution cast into flexible polymer films. The polyamides exhibited high thermal stability with glass‐transition temperatures in the range of 247–293 °C and 10% weight‐loss temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during oxidative scanning, with a strong color change from a colorless or pale yellowish neutral form to green and blue oxidized forms. They had enhanced redox stability and electrochromic performance when compared with the corresponding analogs without tert‐butyl substituents on the TPPA unit. The polyamide with TPPA units in both the diacid and diamine components shows multicolored electrochromic behavior. A polyamide containing both the cathodic coloring anthraquinone chromophore and the anodic coloring TPPA chromophore has the ability to show red, green, and blue states, toward single‐component RGB electrochromics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chloro­bis­[N‐ethoxy­carbonyl‐N′‐(p‐methoxy­phenyl)­thio­urea‐κS]copper(I)

The title copper(I) complex, [CuCl(C₁₁H₁₄N₂O₃S)₂], was synthesized by the redox reaction of cupric chloride with the corresponding thio­urea derivative as reducing agent. The Cu^I coordination environment is trigonal planar, involving two S atoms and one Cl atom. The presence of intramolecular hydrogen bonds leads to the formation of a cis conformation and promotes the stability of the complex.     

Total Synthesis of the Biphenyl Alkaloid (−)‐Lythranidine

A sequence comprising a ring‐closing alkyne metathesis of a propargyl alcohol derivative, followed by a ruthenium‐catalyzed redox isomerization of the derived cycloalkyne and a transannular aza‐Michael addition allowed the formation of the distinguishing piperidine‐metacyclophane framework of the Lythraceum alkaloid lythanidine in a few high‐yielding steps. This application attests to the excellent functional‐group tolerance of a molybdenum alkylidyne complex endowed with triphenylsilanolate ligands, which enabled the macrocyclization even in the presence of protic functionalities, and thus illustrates the power of contemporary catalytic acetylene chemistry for target‐oriented synthesis.     

An Unprecedented Blueshifted Naphthalimide AIEEgen for Ultrasensitive Detection of 4‐Nitroaniline in Water via “Receptor‐Free” IFE Mechanism

The development of a new naphthalene appended naphthalimide derivative ( NMI ) with aggregation‐induced enhanced emission (AIEE) property for the sensitive detection of 4‐nitroaniline (4‐NA) in aqueous media is presented here. The newly designed naphthalimide AIEEgen has an exceptional blue‐shifted condensed state emission that is devoid of any receptor site, accomplished ultrasensitive detection of 4‐NA, which is one of the broad‐spectrum pesticides that belong to the class III toxic chemical, at parts per billion level (LOD/36 ppb, K_sv=4.1×10⁴ m ^?1) in water with excellent selectivity even in the presence of potentially competing aliphatic and aromatic amines. The reported probe is the first of its kind, demonstrating major advantages of receptor‐free inner filter effect (IFE) mechanism for the sensitive detection of 4‐NA using an AIEEgenic probe. Excellent sensitivity for 4‐NA is also achieved on paper‐based test‐strip for low‐cost on‐site detection.