An all-solid-state monohydrogen phosphate sensor based on a macrocyclic ionophore

An all-solid-state electrode, containing a synthesized chiral A₂B₂ macrocyclic compound namely (4R,5R,15R,16R)-4,5,15,16-tetraphenyl-3,6,14,17-tetraazatricyclo [13.3.1.18,12] tetracosa-1(23),8,10,12(24)19,21-hexaene-2,7,13,18-tetrone as an ionophore in polyvinyl chloride (PVC)/polyurethane (PU) membrane matrix, has been developed for the selective quantification of monohydrogen phosphate ions. The best performing membrane contained PVC, PU, ionophore, and nitrophenyl octyl ether as a plasticizer in the ratio 32.2:2.6:65.1 (w/w, %). It exhibited a near-Nernstian slope of 31.0 ± 1.0 mV/decade of activity for HPO₄²⁻ ions in the concentration range of 1.0 × 10⁻⁶ to 1.0 × 10⁻² M at pH 7.4. The detection limit of the electrode was 8.4 × 10⁻⁷ M and the life time was six weeks. The electrode displayed excellent selectivity for monohydrogen phosphate over other anions and the selectivity sequence was determined as HPO₄²⁻ > SO₄²⁻ > Ac⁻ > NO₃⁻ > ClO₄⁻ > Cl⁻ > I⁻. The selective electrode for the monohydrogen phosphate ions was evaluated with a standard reference material (SRM 1548) and the titration of the sample solution.     

All Solid State Nickel(II)‐Selective Potentiometric Sensor Based on an Upper Rim Substituted Calixarene

A new ionophore, i.e. p‐(2‐thiazolazo)calix[4]arene ( I ) has been explored for its selective behavior towards Ni(II) ions. A poly(vinyl chloride) based membrane containing ( I ) as an electroactive material along with sodiumtetraphenylborate (NaTPB), and nitrophenyloctyl ether in the ratio 10 : 100 : 3 : 150 (I:PVC:NaTPB:NPOE) (w/w) was used to fabricate an all solid state nickel(II)‐selective sensor. The developed sensor exhibited a working concentration range of 1.0×10^?6–1.0×10^?1 M, with a Nernstian slope of 28.9±1.0 mV/decade of activity and a response time of 10–15 s. This sensor shows a detection limit of 9.0×10^?7 M. Its potential response remains unaffected of pH in the range 3.0–7.6, and the cell assembly could be used successfully in partially nonaqueous medium (up to 10 % v/v) without any significant change in the slope value or the working concentration range. The sensor worked satisfactorily for about ten weeks and exhibited excellent selectivity over a number of mono‐, bi‐, and tri‐valent cations including alkali, alkaline earth metal, and transition metal ions. It could be used as an indicator electrode for the end point determination in the potentiometric titration of nickel ions against ethylenediaminetetraacetic acid (EDTA) as well as for the determination of nickel ion concentration in real samples.     

Solid-state Electrochemical Sensor Based on a Cross-linked Copper(II)-doped Copolymer and Carbon Nanotube Material for Selective and Sensitive Detection of Monohydrogen Phosphate

A novel solid-state electrochemical sensor based on a newly synthesized cross-linked copper(II) doped-copolymer and carbon nanotube material was developed for the direct determination of monohydrogen phosphate ions (HPO₄²⁻). The synthesized copolymers were characterized by FTIR, XPS, TG/DTG-DTA and SEM techniques. The sensor had a Nernstian slope:-30.7±0.4 mV/decade, linear concentrations range: 1.0×10⁻⁶ - 1.0×10⁻¹ M, detection limit: 6.5×10⁻⁷ M, response time: 4 s and life time: 17 weeks. The sensor displayed constant potentials in the pH range 7.0-9.5. The sensor was successfully used as an indicator electrode in potentiometric titration and the direct determination of HPO₄ ²⁻ in water samples.     

Amide and Acyl‐Hydrazine Functionalized Calix[4]arenes as Carriers for Hydrogen Phosphate Selective Electrodes

Anion‐selective solvent polymeric membrane based on hydrogen bond‐forming, neutral ionophores with amide or acyl‐hydrazine groups are described. The use of the two calix[4]arenes results in anion‐selective electrodes with a selectivity for phosphate. The electrodes of the optimum characteristic have the composition of 1 wt% ionophore, 66 wt% o‐NPOE, 33 wt% poly (vinyl chloride) (PVC) and TDMACl (15 or 30 mol% relative to the ionophore 1 and 2 , respectively). The optimized membrane electrodes show Nernstian responses towards monohydrogen phosphate (?29.1 and ?29.3 mV/decade) based on ionophore 1 and 2 , respectively, in a wide concentration range (1.0×10^?5 to 1.0×10^?2 or 1.0×10^?5 to 1.0×10^?1 M). The selectivity coefficients are determined with the fixed interference method and the activity ratio method. The electrodes display an anti‐Hofmeister series selectivity pattern and highly selective for HPO₄^2? over Cl^?, Br^?, CH₃COO^?, NO₃^? and SO₄^2?. The lifetime of the electrodes is at least 1 month and their response time is found to be 25 s. The proposed sensors could be put to analytical use both by direct potentiometry as well as potentiometric titration.     

全固态苯巴比妥传感器

研制了一种新型的全固态苯巴比妥传感器。其Nernst线性响应范围为 1.0× 10 - 2 ～ 5 .0× 10 - 6 mol L ,斜率为 5 9 0mV pC ,检测限为 2 0× 10 - 6 mol L。此传感器响应迅速 ,重现性好 ,稳定性好 ,用此传感器以标准曲线法对药物中的苯巴比妥进行了测定 ,方法简便 ,结果与药典法相符     

Potentiometric Measurements with A New Solid State Cadmium Ion Selective Electrode

Abstract

A new solid-state cadmium ion selective electrode is evaluated. Interference effects are considered and the electrode is used to detect the endpoint in titrations of cadmium ion in water and in dimethylsulfoxide.     

Properties of A Phosphate Sensitive Solid State Electrode Based On Cerium-Iv-Hydrogenphosphate Mixed With Pvc

Abstract

The development of a phosphate sensitive electrode based on a heterogeneous (Ce-O-Ce) (HPO₄)₃·H₂O / PVC membrane is described. At a certain salt / PVC - mixture ratio an electrode for H₂PO₄ ^? with a slope of -50 mV/activity decade (AD) and a detection limit of approximately 20 ppm H₂PO₄ ^? is obtained. the selectivity coefficients for the interfering ions So₄ ^2?, cl^?, NO₃ ^?     

All‐Solid‐State Chloride Sensors with Poly(3‐Octylthiopene) Matrix and Trihexadecylmethylammonium Chlorides as an Ion Exchanger Salt

All‐solid‐state chloride sensors were prepared by incorporation of trihexadecyl‐methylammonium chloride (THMACl) as an ion‐exchanger salt into a conjugated polymer membrane, poly(3‐octylthiophene) (POT). The influence of additional membrane components, such as a lipophilic anion, (potassium tetrakis[3,5‐bis(trifluoromethyl)phenyl] borate), poly(vinyl chloride) (PVC) or a plasticizer, (2‐nitrophenyl octyl ether) were studied. The membrane components were dissolved in chloroform except for PVC, which was dissolved in tetrahydrofuran (THF). The membrane solution was deposited on glassy carbon (GC) by solution casting resulting in all‐solid‐state chloride sensors. The sensor characteristics were determined potentiometrically and with impedance spectroscopy. The addition of plasticizer was found to be crucial in obtaining a well functioning Cl^?‐ISE based on POT and THMACl.     

Synthesis of Layered Sodium Manganese Phosphate via Low-heating Solid State Reaction and Its Properties

The layered nanocrystalline sodium manganese phosphate was synthesized by low‐heating solid state reaction using MnSO₄·H₂O and Na₃PO₄·12H₂O as raw materials. The resulting sodium manganese phosphate and its calcined products were characterized using element analysis, thermogravimetry and differential thermal analyses (TG/DTA), Fourier transform IR (FT‐IR), X‐ray powder diffraction (XRD), scanning electron microscopy (SEM), ultraviolet‐visible (UV‐Vis) absorption spectroscopy, and magnetic susceptibility. The results showed that the product obtained at 70°C for 3 h, NaMnPO₄·3H₂O, was a layered compound, and its crystallite size and interlayer distance were 27 nm and 1.124 nm, respectively. The thermal process of NaMnPO₄·3H₂O between room temperature and 700°C experienced three steps, the dehydration of the one adsorption water at first, and then dehydration of the two crystal waters, at last crystallization of NaMnPO₄. Magnetic susceptibility measurements of NaMnPO₄· 3H₂O from room temperature to 2.5 K point to ferrimagnetic ordering at T_N‐35 K.     

Preparation of Ammonium Cerium Phosphate via Low-heating Solid State Reaction and Its Catalysis for Benzyl Acetate Synthesis

Ammonium cerium phosphate was prepared with (NH₄)₃PO₄·3H₂O and Ce(SO₄)₂·4H₂O as raw materials and PEG‐400 as surfactant via a solid state reaction at low‐heating temperature. The characterization result of XRD indicates that the molecular formula of the product was (NH₄)₂Ce(PO₄)₂·H₂O. The synthesis of benzyl acetate was carried out with H₂SO₄/ammonium cerium phosphate as catalyst, and uniform experimental design as well as data mining technology was applied to the experiments, in which the effect of the reaction time, the molar ratio of acid to alcohol and the amount of catalyst on the conversion yield of acetic acid were studied. When benzalcohol was 0.10 mol, under the optimal reaction conditions, i.e. reaction time of 174 min, 2.02 of molar ratio of acid to alcohol and 0.5 g of catalyst, the esterification rate of acetic acid was 97.9%. The ammonium cerium phosphate had potential for industry application since it not only was feasible and simple in synthesis technics, but also had good catalysis activity for the synthesis of benzyl acetate.     

Microfabricated Solid-contact Potentiometric Sensor for Determination of Tedizolid Phosphate,Application to Content Uniformity Testing

Solid contact sensors were designed for determination of the antibiotic prodrug tedizolid phosphate. The sensors are based on; microfabricated copper as cost-effective electrode substrate and graphene layer as a transducer. The ion sensing PVC polymeric membrane was optimized by proper selection of the anion exchanger. The graphene layer was characterized by scanning electron microscopy, Raman spectroscopy, FT-IR, besides measuring electrochemical impedance for the fabricated sensors. The potential drift decreased down to 0.133 mV h⁻¹ compared to 6.67 mV h⁻¹ for graphene free sensor. The sensors have been used to determine tedizolid phosphate in its pharmaceutical formulation and content uniformity testing applications.     

Stability Enhancement of All‐Solid‐State H+ ISEs with Cross‐Linked Silicon‐Urethane Matrices

An all‐solid‐state hydrogen‐ion‐selective electrode (ASHISE) was fabricated using the polymer hybrid membrane. Polymer membranes composed of Tecoflex polyurethane (TPU), polyvinyl chloride (PVC), silicon rubber (SR), and additives (KTpClPB, DOA, and TDDA) were cast on a carbon rod. The TPU/SR hybrid membrane exhibited a longer lifetime and a higher sensitivity in the sensing of the H⁺ ion compared to conventional TPU/PVC and PVC/SR hybrid membranes. Moreover, the addition of SiCl₄ to TPU‐based matrices enhanced the potentiometric response and ISE stability, due to the chemical bonding between Si and C?O in urethane, in which the cross‐linking configuration was confirmed by DSC, FT‐IR, and XPS experiments. TPU/SR membranes containing SiCl₄ were rendered more stable and showed a pH response over a wide range (i.e., pH 2–11.5) with the slope of 60±2 mV/pH for more than four months. The ASHISE exhibited a small interfering potential variation in the wide range of the salt concentration (from 1.0×10^?6 M up to 0.1 M). The ASHISE showed a result comparable to a commercial clinical blood analyzer.     

Tailoring Solution Cast Poly(3,4‐dioctyloxythiophene) Transducers for Potentiometric All‐Solid‐State Ion‐Selective Electrodes

A novel concept of tailoring potentiometric responses of all‐solid‐state ion‐selective electrodes was introduced. The effect of composition and resulting properties of the conjugated polymer transducer, placed between the electrode support and ion‐selective membrane, on analytical characteristic of obtained sensors was studied.     

Molecularly Imprinted Potentiometric Sensor for Nanomolar Determination of Pioglitazone Hydrochloride in Pharmaceutical Formulations

Pioglitazone Hydrochloride (PG) is an insulin-sensitizing drug and is indicated for the treatment of type II diabetes. In this study, newly molecularly imprinted electrochemical sensors were constructed for the potentiometric determination of PG in the pharmaceutical formulations (Diabetonorm® 45 and 15 mg) with high accuracy and precision. The MIP particles (ionophore) were prepared by using the PG drug as a template, acrylamide (AC) or methacrylic acid (MAA) as a functional monomer, and ethylene glycol dimthacrylate (EGDMA) as a cross-linker. The best MIP was synthesized from AC as a functional monomer, AC-MIP. The best sensor (CPEs) was formulated from graphite (47 wt%) as a carbon source, AC-MIP (5 wt.%) as an ionophore, PMA (1 wt%) as an ion-exchanger, DNPOE (47 wt.%) as a conductive oil so-called plasticizer. The best CPE electrode exhibited response slope to the Nernstian slope of 63.0 mV Decade⁻¹, linear dynamic range of 10⁻⁸–10⁻⁴ M with the detection limit of 1.0×10⁻⁸ M, along with high reversibility, short response time 30 sec, and a long lifetime. The constructed biosensors showed high selectivity against similar interfering species (e. g. arabinose, galactose, lactose, maltose, glucose, Ba²⁺, Cu²⁺, Na⁺, Zn²⁺, Mg²⁺, Fe²⁺, Ca²⁺, NH₄⁺).     

Sol‐Gel Derived Potentiometric Sensor for Determination of Vanadyl Ions

A sol‐gel electrode, based on thiacalix[4]arene as a neutral carrier, was successfully developed for the detection of VO²⁺ in aqueous solutions. The sol‐gel electrode exhibited linear response with Nernstian slope of 29.3±0.3 mV per decade, within the vanadyl ion concentration ranges 1.0×10^?6 – 1.0×10^?1 mol dm^?3. The sol‐gel electrode shows detection limit of 4.9×10^?7 mol dm^?3. The influence of membrane composition, the pH of the test solution, and the interfering ions on the electrode performance were investigated. The electrode exhibited good selectivities for a number of alkali, alkaline earth, transition and heavy metal ions. The effect of temperature on the electrode response showed that the temperature higher than 60 °C deteriorates the electrode performance. Application of the electrode for the determination of vanadyl in spiked samples is reported.     

Determination of Fluoride Ions in Mouthwash Samples by a PVC Membrane Samarium(III) Sensor

Abstract

In this study, a new ion-selective electrode for Sm³⁺ is described, illustrating 2-[(E)-1-(1H-pyrrol-2-yl)methylidene]-1-hydrazinecarbothioamide (PMH) in a poly(vinylchloride) (PVC) membrane with nitrobenzene (NB) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic additive. The proposed sensor exhibited a Nernstian response for Sm³⁺ ions over a wide concentration range between 1.0 × 10^?2 and 1 × 10^?6 M, with a detection limit of 5.2 × 10^?7 M in the pH range of 4.2–8.5. Moreover, the sensor displayed the Nernstian slope of 19.8 ± 0.3 mV per decade, having a fast response time within 10 s over the entire concentration range. This electrode presented very good selectivity and sensitivity toward the Sm³⁺ ions over a wide variety of cations, including alkali, alkaline earth, transition-metal, and heavy-metal ions. It was used as an indicator electrode in the potentiometric titration of Sm³⁺ ions with EDTA. The membrane sensor was also applied to the determination of fluoride ions in mouthwash samples.     

New Ion‐Pair Based All‐Solid‐State Surfactant Sensitive Sensor for Potentiometric Determination of Cationic Surfactants

Cationic surfactants of different types were determined using a few potentiometric sensors based on ion‐pair complexes (dodecyldimethylbenzylammonium dodecylsulfate, dodecylmethylbenzylammonium dodecylbenzensulfonate, tetrahexadecylammonium dodecylsulfate and Hyamine (benzethonium dodecylsulfate)) as sensing materials. The response of the all‐solid state surfactant sensitive electrode based on a Teflonized graphite conducting substrate, coated with a PVC membrane containing sensing material, was investigated in the solutions of Hyamine and hexadecyltrimethylammonium ion in the concentration range from 1 μM to 10 mM. Potentiometric surfactant cation titration has been performed using sodium dodecylsulfate as titrant and an ion‐pair‐based surfactant sensitive electrode as a potentiometric indicator. Several commercial surfactant products have also been titrated and the results were compared with those obtained with two‐phase standard titration method.     

Highly Selective All‐Plastic,Disposable, Cu2+‐Selective Electrodes

Conducting polymers (CP) remain a promising material to construct stable potential all‐solid‐state ion‐selective potentiometric electrodes. The unique properties of poly(3,4‐ethylenedioxythiophene) doped with poly(4‐styrenesulfonate) ions, PEDOT‐PSS: high CP stability and affinity of doping anions towards Cu²⁺ ions, make it highly attractive for construction of all‐solid‐state copper(II)‐selective electrodes with outstanding selectivity. The additional benefits can arise from solution processability of commercially available PEDOT‐PSS system. This material was highly promising for a new sensor arrangement, i.e. to obtain disposable, planar and flexible all‐plastic Cu²⁺‐selective electrodes. These sensors can be obtained by casting a commercially available dispersion of PEDOT‐PSS (Baytron P) on a plastic, non‐conducting support material. The CP being both electrical lead and ion‐to‐electron transducer, was covered with plastic, solvent polymeric Cu²⁺ selective membrane. This extremely simple arrangement, after conditioning in dilute Cu²⁺ solution, was characterized with linear Nernstian responses within the activities range from: 0.1 to 10^?4 M, followed by super‐Nernstian responses for lower activities. The latter result points to effective elimination of primary ions leakage from the plastic membrane / transducer phase and has resulted in significantly improved selectivities. Obtained log K values were equal to ?7.6 for Co²⁺, ?7.4 for Zn²⁺, ?7.2 for Ca²⁺ and ?6.8 for Na⁺, respectively.     

Determination of Ytterbium(III) Ions in Soil and Sediment Samples by a New Polymeric Yb3+-PVC Membrane Sensor

Abstract

A polyvinyl chloride (PVC) membrane sensor for ytterbium(III) ions was prepared, based on 2,5-bis(5-tert-butyl-benzoxazol-2-yl)thiophene (BBT) as a membrane carrier. The sensor illustrates the following characteristics: a linear dynamic range of 1.0 × 10^?6 to 1.0 × 10^?2 M; a Nernstian slope of 19.7 ± 0.5 mV decade^?1; a detection limit of 4.4 × 10^?7 M; a response time of <10 s; and use for at least 2 months without any significant potential divergence in the pH range of 3.5–8.4. Moreover, the recommended selective sensor revealed a comparatively satisfactory selectivity regarding most of the alkali and alkaline earth ions and some of the transition-metal and heavy-metal ions. In fact, it was used as an indicator electrode in the Yb(III) potentiometric titration with ethylene diamine tetra-acetic acid (EDTA) and the determination of concentration of Yb(III) ions in soil and sediment samples.     

A Solid State Polymer‐Coated Electrode Containing a Chiral Crown Ether Derivative for Enantioselective Detection of Phenylglycine Methyl Ester Isomer

All solid‐state enantioselective electrode (ASESE) based on a newly synthesized chiral crown ether derivative ((R)‐(?)‐(3,3′‐diphenyl‐1,1′‐binaphthyl)‐23‐crown‐6 incorporating 1,4‐dimethoxybenzene) was prepared and characterized by potentiometry. The ASESE clearly showed enantiomer discrimination for methyl esters of alanine, leucine, valine, phenylalanine, and phenylglycine, where the enantioselectivity for phenylglycine methyl ester was the highest (K_R,S=8.5±7.1%). Experimental parameters of ASESE for the analysis of (R)‐(?)‐phenylglycine methyl ester were optimized. The optimized ASESE showed a slope of 55.3±0.2 mV/dec for (R)‐(?)‐phenylglycine methyl ester in the concentration range of 1.0×10^?5–1.0×10^?2 M and the detection limit was 9.0×10^?6 M. The ASESE showed good selectivity for (R)‐(?)‐phenylglycine methyl ester against inorganic cations and various amino acid methyl esters. The concentration of (R)‐(?)‐phenylglycine methyl ester was determined in the mixture of (R)‐(?) and (S)‐(+)‐phenylglycine methyl ester, which ratios varied from 2 : 1 to 1 : 9. The lifespan of the electrode was alleged to be 30 days.