A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

One‐Pot Synthesis of 1,4‐Oxathiino[2,3‐b]quinoxalines or ‐pyrazines from 2,3‐Dichloroquinoxaline or ‐pyrazine and 1‐Aryl‐2‐bromoalkan‐1‐ones

An efficient one‐pot synthesis of novel heterocyclic derivatives, 2‐aryl‐1,4‐oxathiino[2,3‐b]quinoxalines or ‐pyrazines 5 , via the reaction of 2,3‐dichloroquinoxaline or ‐pyrazine with Na₂S?9 H₂O, and subsequent treatment of the resulting 2‐chloro‐3‐sodiosulfanylquinoxaline or ‐pyrazine 2 with 1‐aryl‐2‐bromo‐1‐alkanones and then NaH under mild conditions is described.     

Furopyridines. XXVI. Reactions of cyanopyridine derivatives of furo[2,3‐b]‐, ‐[3,2‐b]‐, ‐[2,3‐c]‐ and ‐[3,2‐c]pyridine

Bromination of α‐cyanopyridine derivatives of furopyridines 1a‐d gave the 2,3‐dibromo‐2,3‐dihydro compounds 2a‐d in excellent yields. Treatment of 2a‐d with sodium hydroxide in methanol yielded compounds formed through the dehydrobromination and solvolysis of the nitrile. N‐Oxidation of 1a and 1b gave N‐oxide in much poor yield, while 1c and 1d gave the N‐oxide 13c and 13d in good yields. The nucleophilic reactions (cyanation, chlorination and acetoxylatoin) of 13c through a Reissert‐Henze type reaction gave poor results, which would be caused by the strong electron withdrawing effect of the cyano group.     

A Facile One‐Pot Synthesis of Functionalized 1,5‐Dihydro‐2H‐[1]benzopyrano[2,3‐b]pyridin‐5‐ones

The highly reactive 1 : 1 intermediate generated in the reaction between dialkyl acetylenedicarboxylate (=but‐2‐ynedioic acid dialkyl ester) 4 and triphenylphosphine was trapped by 2‐amino‐4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehydes 5 to yield highly functionalized dialkyl‐1,5‐dihydro‐5‐oxo‐1‐phenyl‐2H‐[1]benzopyrano[2,3‐b]pyridine‐2,3‐dicarboxylates in high yield.     

Highly Efficient Synthesis of Thieno[2,3‐b]indole Derivatives

Thieno[2,3‐b]indole derivatives were efficiently prepared via the reaction of 1,3‐dihydro‐2H‐indole‐2‐thiones with α‐bromo‐substituted ketones or aldehydes and in the presence of Et₃N (Scheme 2 and Table). The reaction took place under very mild conditions and in short times with good to excellent yields.     

Synthesis of Three‐, Five‐, and Six‐Membered Heterocycles Derived from New β‐Amino‐α‐(trifluoromethyl) Alcohols

Nucleophilic trifluoromethylation of α‐imino ketones 2 , derived from arylglyoxal, with Ruppert–Prakash reagent (CF₃SiMe₃) offers a convenient access to the corresponding O‐silylated β‐imino‐α‐(trifluoromethyl) alcohols. In a ‘one‐pot’ procedure, by treatment with NaBH₄, these products smoothly undergo reduction and desilylation yielding the expected β‐amino‐α‐(trifluoromethyl) alcohols 4 . The latter were used as starting materials for the synthesis of diverse trifluoromethylated heterocycles, including aziridines 5 , 1,3‐oxazolidines 8 , 1,3‐oxazolidin‐2‐ones 9 , 1,3,2‐oxazaphospholidine 2‐oxides 10 , 1,2,3‐oxathiazolidine 2‐oxides 11 , and morpholine‐2,3‐diones 12 . An optically active 5‐(trifluoromethyl)‐substituted 1,3‐oxazolidin‐2‐one 9g was also obtained.     

Synthesis of 2,3‐Diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ol Derivatives by the Reaction of Aryl(3‐isocyanopyridin‐4‐yl)methanones with Aryl Grignard Reagents

The reaction of aryl(3‐isocyanopyridin‐4‐yl)methanones 1 , easily prepared from commercially available pyridin‐3‐amine, with aryl Grignard reagents gave, after aqueous workup, 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ols 2 . These rather unstable alcohols were O‐acylated with Ac₂O in pyridine in the presence of a catalytic amount of 4‐(dimethylamino)pyridine (DMAP) to afford the corresponding 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐yl acetates 3 in relatively good yields.     

A Facile Approach for Synthesis of Benzofuro[2,3‐c]pyridines via Intramolecular Cascade Annulations

A facile synthesis of benzofuro[2,3‐c]pyridines has been achieved under mild conditions by using ammonium acetate as the nitrogen source through intramolecular cascade annulation. This reaction could efficiently construct pyridine ring and furan ring in one step. Moreover, the key annulation step was demonstrated through dihydrobenzofuran intermediates.     

Synthesis of Novel Polyfunctionally Substituted Thieno[2,3‐c]pyridazines

4‐Cyano‐5,6‐dimethylpyridazin‐3‐(2H)‐thione 3b was used as a key intermediate for the synthesis of novel polysubstituted thieno[2,3‐c]pyridazines.     

Chemoselective Route for Synthesis of N‐Aryl‐3‐oxochromeno[2,3‐c]pyrazole‐2(3H)‐carbothioamide Derivatives

A chemoselective route for the synthesis of chromeno[2,3‐c]pyrazole‐2(3H)‐carbothioamide derivatives by a five‐component reaction of salicylaldehyde, malononitrile, NH₂NH₂?H₂O, aryl isothiocyanate, and H₂O in EtOH/AcOH mixture is reported. This new protocol has the advantages of high yields, short reaction times, ease of operation, and simple purification. All structures were confirmed by IR, ¹H‐ and ¹³C‐NMR, and MS analyses. A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis of substituted amino‐cycloalkyl[b]thieno‐[3,2‐e]pyridines

An efficient two respectively three steps procedure for the synthesis of cycloalkyl[b]thieno[3,2‐e]‐pyridine amines was developed and in general good to very good yields were obtained.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Synthesis of Certain 3-Aminopyrazolo[5,4-b]pyridine and 3,4-Substituted Pyrido[2′,3′：3,4]pyrazolo[5,1-c][1,2,4]triazine Derivatives

2-Thioxo-1,2-dihydropyridine derivatives 2a, 2b were reacted with methyl iodide to give 2-methylthiopyridines 3a, 3b, which were reacted with hydrazine hydrate to produce 3-aminopyrazolo[5,4-b]pyridines 4a, 4b. Compounds 4a, 4b were diazotized to afford the corresponding diazonium salts 5a, 5b, which were reacted with some active methylene compounds 6a-6h to give the corresponding pyrido[2′,3′ ： 3,4]pyrazole[5,1-c][1,2,4]triazines 7-14.     

A Simple Synthesis of 2‐{(Arylmethylidene)hydrazinylidene]‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4(3H)‐ones

A simple synthesis of 2‐hydrazinylidene‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4‐ones is described. A mixture of (isocyanoimino)(triphenyl)phosphorane, an aromatic aldehyde, and dehydroacetic acid (=3‐acetyl‐2‐hydroxy‐6‐methyl‐4H‐pyran‐4‐one) undergo a 1 : 1 : 1 addition reaction under mild conditions to afford the title compounds in excellent yields.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Synthesis of Novel Pyrano[2,3‐b]pyridines from α,α′‐Bis(substituted‐benzylidene)cycloalkanones

In this paper, we describe a two‐step synthesis of a series of tacrine analogues. In the first step, α,α'‐bis(substituted‐benzylidene)cycloalkanones are reacted with malononitrile to afford 2‐amino‐3‐cyano‐4H‐pyrans. The second step involves the conversion of pyrans to pyrano[2,3‐b]pyridines with the use of AlCl₃ as catalyst.     

Synthesis and Evaluation of Bioactivity of Thiazolo[3,2‐b]‐[1,2,4]‐triazoles and Isomeric Thiazolo[2,3‐c]‐[1,2,4]‐triazoles

Synthesis of 2‐(o‐nitrophenyl)‐6‐arylthiazolo[3,2‐b]‐[1,2,4]‐triazoles 4 and its isomer 3‐(o‐nitrophenyl)‐5‐arylthiazolo[2,3‐c]‐[1,2,4]‐triazoles 6 has been achieved starting from the appropriate 1‐(o‐nitrobenzoyl)‐3‐thiosemicarbazide 1 . Compound 1 on condensation with α‐haloketones gives 2‐(o‐nitrobenzoyl)hydrazino‐4‐arylthiazole hydrobromide 5 , which, on cyclization with POCl₃, affords thiazolo[3,2‐b]‐[1,2,4]‐triazoles 6 and not the isomeric thiazolo[3,2‐b]‐[1,2,4]‐triazoles 4 . This has been established by an unequivocal synthesis of 4 through polyphosphoric acid cyclization of 5‐aroylmethylmercapto‐3‐o‐nitrophenyl‐[1,2,4]‐triazole 3 . Compound 3 was synthesized by condensation of α‐haloketones with 5‐mercapto‐3‐(o‐nitrophenyl)‐[1,2,4]‐triazole 2 , obtained cyclization of 2‐(o‐nitrobenzoyl)hydrazinecarbothioamide 1 with NaOH. The antibacterial and antifungal activities of some of the compounds have also been evaluated.     

Efficient Synthesis of (3E)‐3‐[Amino(aryl)methylidene]chromane‐2,4‐diones (=(3E)‐3‐[Amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) via a Three‐Component Reaction

The Michael‐type addition of a 4‐hydroxycoumarin (=4‐hydroxy‐2H‐1‐benzopyran‐2‐one) 1 to a β‐nitrostyrene (=(2‐nitroethenyl)benzene) 2 in the presence of AcONH₄ leads to substituted (3E)‐3‐[amino(aryl)methylidene]chroman‐2,4‐diones (=(3E)‐3‐[amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) 4 (Table 1). High yields, short reaction time, and easy workup are advantages of this novel one‐pot three‐component reaction.     

Synthesis of 2-(hetero)arylthieno[2,3-b] or [3,2-b]pyridines from 2,3-dihalopyridines, (hetero)arylalkynes,and Na2S. Further functionalizations

A simple and efficient three-step methodology is described for the first time for the synthesis of 2-(hetero)arylthieno[2,3-b] or [3,2-b]pyridines. The first step is a Sonogashira coupling from 3-bromo-2-chloropyridine or 2-bromo-3-chloropyridine with several (hetero)arylalkynes to obtain the corresponding 2- or 3-chloro(hetero)arylethynylpyridines. These were cyclized by treatment with Na₂S affording the expected 2-(hetero)arylthienopyridines. As an improvement, these reactions were also performed in one-pot, without the isolation of the Sonogashira product, giving the thienopyridines in similar or better yields, reducing significantly the reaction time after the addition of Na₂S. Further functionalizations were achieved in the thienopyridine system either by bromination in the thiophene ring or chlorination in the pyridine ring via a N-oxide intermediate, allowing metal-catalyzed coupling reactions and/or nucleophilic substitutions. The functionalization of some substituents is also possible and as an example a 1,3-diarylurea was obtained from the reaction of an aniline derivative with an arylisocyanate.