Modification of the Electrode Surface by Ag Nanoparticles Decorated Nano Diamond‐graphite for Voltammetric Determination of Ceftizoxime

A modified glassy carbon electrode with a film of nano diamond? graphite nano mixture decorated with Ag nanoparticles (AgNPs? NDG/GCE) was constructed and used for sensitive voltammetric determination of ceftizoxime (CFX). Morphology of AgNPs? NDG/GCE has been examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Experimental variables such as deposited amount of the modifier suspension, pH of the supporting electrolyte and accumulation potential and time were optimized by monitoring of CV and LSV responses of CFX. The results illustrate that AgNPs? NDG/GCE exhibits an excellent electrocatalytic effect in the electro‐oxidation of CFX that leads to a considerable improvement in the corresponding anodic peak current. This also allows the development of a highly sensitive voltammetric sensor for the determination of CFX in pharmaceutical and clinical samples. Under the optimum conditions, the modified electrode showed a linear response to the concentration of CFX in the range of 0.02–7 µM with detection limit of 6 nM. The prepared modified electrode has some remarkable electrochemical properties such as simple preparation, high sensitivity, excellent repeatability and reproducibility and long‐term stability.     

Nanocellulose/Carbon Nanoparticles Nanocomposite Film Modified Electrode for Durable and Sensitive Electrochemical Determination of Metoclopramide

A novel electrochemical sensor based on nanocellulose‐carbon nanoparticles (NC‐CNPs) nanocomposite film modified glassy carbon electrode (GCE) is developed for the analysis of metoclopramide (MCP). Atomic force microscopy, scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the roughness, surface morphology and performance of the deposited modifier film on GCE. SEM image demonstrated that modifier nanoparticles are uniformly deposited on GCE, with an average size of less than 50 nm. The electrochemical behavior of MCP and its oxidation product is studied using linear sweep and cyclic voltammetry over a wide pH range on NC‐CNPs modified glassy carbon electrode. The results revealed that the oxidation of MCP is an irreversible and pH‐dependent process that proceeds in an adsorption‐controlled mechanism and results in the formation of a main oxidation product, which adsorbs on the surface of NC‐CNPs/ GCE. The modified electrode showed a distinctive anodic response towards MCP with a considerable enhancement (49 fold) compared to the bare GCE. Under the optimized conditions, the modified electrode exhibited a wide linear dynamic range of 0.06–2.00 µM with a detection limit of 6 nM for the voltammetric determination of MCP. The prepared modified electrode showed several advantages such as simple preparation method, high stability, reproducibility, and repetitive usability. The modified electrode is successfully applied for the accurate determination of trace amounts of MCP in pharmaceutical and clinical preparations.     

A promising electrochemical sensing platform based on copper nanoparticles-decorated polymer in carbon nanotube electrode for monitoring methimazole

In this paper, a novel and convenient electrochemical sensor for detection of methimazole (MMI) by differential pulse voltammetry is presented. This sensor was fabricated by dripping well-dispersed MWCNTs onto glassy carbon electrode (GCE) surface, and then poly-l-Arg (P-L-Arg) film was deposited on the electrode. Finally, Cu nanoparticles (CuNPs) were electrochemically deposited on the resulting film by using cyclic voltammetry to prepare CuNPs-P-L-Arg/MWCNTs/GCE. The surface morphology of the electrodes has been studied by scanning electron microscopy. Studies reveal that the irreversible oxidation of MMI was highly facile on CuNPs-P-L-Arg/MWCNTs/GCE. The dynamic detection range of this sensor to MMI was 5.2–50 µM, with the detection limit of 2 µM. A new voltammetric method for determination of MMI was erected and shows good sensitivity and selectivity, very easy surface update and good stability. The analytical application of the modified electrode is demonstrated by determining MMI in biological fluids (serum).     

Gold Electrode Modified with Self‐Assembled Monolayer of Cysteamine‐Functionalized MWCNT and Its Application in Simultaneous Determination of Dopamine and Uric Acid

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self‐assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para‐hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and UA was investigated. The detection limit in differential pulse voltammetric determinations was obtained as 0.02 µM and 0.1 µM for DA and UA, respectively. The prepared modified electrode indicated a stable behavior and the presence of surface COOH groups of the functionalized MWCNT avoided the passivation of the electrode surface during the electrode processes. The proposed method was successfully applied for the determination of DA and UA in urine samples with satisfactory results. The response of the gold electrode modified with MWCNT‐functionalized SAM method toward DA, UA, and ascorbic acid (AA) oxidation was compared with the response of the modified electrode prepared by the direct casting of MWCNT.     

Solidified floating organic drop microextraction for determination of trace amounts of zinc in water samples by flame atomic absorption spectrometry

A glassy carbon electrode was prepared that was coated with a composite film containing electropolymerized poly(amidosulfonic acid) and multi-walled carbon nanotubes. It was used to study the electrochemical response of procaine by differential pulse voltammetry. The results indicate that the electrode exhibits a remarkable improvement in the oxidation peak of procaine, and this led to a simple and sensitive method for the electroanalytical determination of procaine. The peak current is proportional to the concentration of procaine from 80 nM to 1.0 µM. The detection limit is 25 nM (S/N?=?3). The modified electrode was successfully applied to the direct determination of procaine in pharmaceutical formulations.     

Electrocatalytic oxidation and flow-injection determination of ascorbic acid at a graphite electrode modified with a polyaniline film containing electrodeposited palladium

A method for forming a composite film on the surface of a graphite electrode is proposed. Conditions for detecting the maximum catalytic current under batch and flow conditions are determined. A procedure for the electrocatalytic determination of ascorbic acid at the graphite electrode modified with a polyaniline film containing palladium particles is proposed. The catalytic effect of this electrode manifests itself by a ～300-mV decrease in the peak potential of ascorbic acid oxidation and by a multiple increase in the peak current of ascorbic acid oxidation as compared to the unmodified electrode. The linear dependence of the electrocatalytic response of the composite electrode on the concentration of ascorbic acid is observed down to 1 × 10^?8 M and 2.5 nmol of ascorbic acid under batch and flow-injection analysis conditions, respectively.     

Construction of an electrochemical sensor based on the electrodeposition of Au-Pt nanoparticles mixtures on multi-walled carbon nanotubes film for voltammetric determination of cefotaxime

Mixtures of gold-platinum nanoparticles (Au-PtNPs) are fabricated consecutively on a multi-walled carbon nanotubes (MWNT) coated glassy carbon electrode (GCE) by the electrodeposition method. The surface morphology and nature of the hybrid film (Au-PtNPs/MWCNT) deposited on glassy carbon electrodes is characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. The modified electrode is used as a new and sensitive electrochemical sensor for the voltammetric determination of cefotaxime (CFX). The electrochemical behavior of CFX is investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable improvement in the oxidation peak current of CFX compared to glassy carbon electrodes individually coated with MWCNT or Au-PtNPs. Under the optimized conditions, the modified electrode showed a wide linear dynamic range of 0.004-10.0 μM with a detection limit of 1.0 nM for the voltammetric determination of CFX. The modified electrode was successfully applied for the accurate determination of trace amounts of CFX in pharmaceutical and clinical preparations.     

Amperometric determination of paracetomol by a surface modified cobalt hexacyanoferrate graphite wax composite electrode

A stable electro active thin film of cobalt hexacyanoferrate (CoHCF) was deposited on the surface of an amine adsorbed graphite wax composite electrode using a simple method. Cyclic voltammetric experiments showed two pairs of well defined peaks for this CoHCF modified electrode which exhibited excellent electrocatalytic property for the oxidation of paracetomol at a reduced overpotential of 100 mV and over a concentration range of 3.33 × 10⁻⁶ to 1.0 × 10⁻³ M with a slope of 0.208 μA/μM with good sensitivity. The influence of the supporting electrolyte on peak current and peak potential were also obtained in addition with effects of common interference (e.g., ascorbic acid) on the response of the modified electrode. Various parameters that influence the electrochemical behavior of the modified electrode were optimized by varying scan rates and pH. Electrochemical impedance spectroscopy studies suggested that the electrode reaction of the CoHCF film is mainly controlled by transport of counter ion. The immobilized CoHCF maintained its redox activity showing a surface controlled electrode reaction with the electron transfer rate constant (K_s) of 0.94 s⁻¹ and charge transfer coefficient of 0.42. Hydrodynamic and chronoamperometric studies were done to explore the utility of the modified electrode in dynamic systems. The results of the differential pulse voltammetry (DPV) using the modified electrode was applied for the determination of paracetomol in commercially available tablets. The results obtained reveal that the electrode under study could be used as an effective sensor for online monitoring of paracetomol.     

Pyrolytic graphite electrode modified with a thin film of a graphite/diamond nano-mixture for highly sensitive voltammetric determination of tryptophan and 5-hydroxytryptophan

We have prepared a pyrolytic graphite electrode (PGE) whose surface is covered with a thin film of a nano-mixture of graphite/diamond (NGD). The electrode is shown to be capable of electrochemically sensing of tryptophan (TRP) and 5-hydroxytryptophan (HTRP). The presence of the NGD film resulted in a remarkable increase in the peak currents and sharpness of the waves so that submicromolar concentrations of TRP and HTRP become detectable. Potential scan rates, the pH of the solution, the accumulation conditions and the amount of the modifier were optimized via cyclic voltammetry. Linear sweep voltammetry, under optimized accumulation time and in open circuit operation, was applied to the determination of TRP and HTRP with detection limits (S/N = 3) of 30 nM (TRP) and 6 nM (HTRP). The electrode can be easily prepared, displays high sensitivity, sharp peaks, long-term stability, and remarkable voltammetric reproducibility and repeatability. These properties make the sensor suitable for the trace analysis of TRP and HTRP in pharmaceutical and clinical preparations.

A pyrolytic graphite electrode modified with a thin film of a nano-mixture of graphite/diamond. This electrochemical sensor applied for determination of tryptophan and 5-hydroxytryptophan in aqueous solutions. The modified electrode showed a remarkable increase in the peak currents and sharpness of the waves.

     

Sensitive and Rapid Flow Injection Amperometric Hydrazine Sensor using an Electrodeposited Gold Nanoparticle Graphite Pencil Electrode

A gold (Au) nanoparticle-modified graphite pencil electrode was prepared by an electrodeposition procedure for the sensitive and rapid flow injection amperometric determination of hydrazine (N₂H₄). The electrodeposited Au nanoparticles on the pretreated graphite pencil electrode surface were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and electrochemical impedance spectroscopy. Cyclic voltammograms showed that the Au nanoparticle-modified pretreated graphite pencil electrode exhibits excellent electrocatalytic activity toward oxidation of hydrazine because the highly irreversibly and broadly observed oxidation peak at +600?mV at the pretreated graphite pencil electrode shifted to ?167?mV at the Au nanoparticle pretreated graphite pencil electrode; in addition, a significant enhancement in the oxidation peak current was obtained. Thus, the flow-injection (FI) amperometric hydrazine sensor was constructed based on its electrocatalytic oxidation at the Au nanoparticle-modified pretreated graphite pencil electrode. The Au nanoparticle-modified pretreated graphite pencil electrode exhibits a linear calibration curve between the flow injection amperometric current and hydrazine concentration within the concentration range from 0.01 to 100?µM with a detection limit of 0.002?µM. The flow injection amperometric sensor has been successfully used for the determination of N₂H₄ in water samples with good accuracy and precision.     

Electropolymerized Diphenylamine on Functionalized Multiwalled Carbon Nanotube Composite Film and Its Application to Develop a Multifunctional Biosensor

Diphenylamine (DPA) monomers have been electropolymerized on the amino‐functionalized multiwalled carbon nanotube (AFCNT) composite film modified glassy carbon electrode (GCE) by cyclic voltammetry (CV). The surface morphology of PDPA‐AFCNT was studied using field‐emission scanning electron microscopy (FE‐SEM). The interfacial electron transfer phenomenon at the modified electrode was studied using electrochemical impedance spectroscopy (EIS). The PDPA‐AFCNT/GCE represented a multifunctional sensor and showed good electrocatalytic behavior towards the oxidation of catechol and the reduction of hydrogen peroxide. Rotating‐disk electrode technique was applied to detect catechol with a sensitivity of 1360 µA mM^?1 cm^?2 and a detection limit of 0.01 mM. Amperometric determination of hydrogen peroxide at the PDPA‐AFCNT film modified electrode results in a linear range from 10 to 800 µM, a sensitivity of 487.1 µA mM^?1 cm^?2 and detection limit of 1 µM. These results show that the nano‐composite film modified electrode can be utilized to develop a multifunctional sensor.     

Mechanically immobilized nickel aquapentacyanoferrate modified electrode as an amperometric sensor for the determination of BHA

Nickel aquapentacyanoferrate (NAPCF), a novel transition metal complex has been prepared and its ability to act as an electrocatalyst for BHA oxidation has been demonstrated. The cyclic voltammetric behaviour of the NAPCF modified electrode prepared by mechanical immobilization on the graphite electrode was well defined. A pair of redox peaks corresponding to the electrochemical behaviour of the NAPCF was observed at 0.35 V and 0.31 V, corresponding to the anodic and cathodic peaks respectively, with a formal potential of 0.33 V. The NAPCF modified electrode favoured electrocatalytic oxidation of BHA to occur at a greatly minimized overpotential of 0.48 V. Experiments were performed to characterize the electrode as an amperometric sensor for the determination of BHA. The anodic peak current was linearly related to BHA concentration in the range of 6.24x10(-7) M to 2.19x10(-4) M with a detection limit of 2.49x10(-7) M and a correlation coefficient of 0.9979. Amperometry in stirred solution exhibited quick and sensitive response to BHA, showing the possible application of the modified electrode in flow system analysis. The modified electrode retained its initial response for more than 2 months when stored in supporting electrolyte, owing to the chemical and mechanical stability of the NAPCF mediator. This modified electrode was also quite effective in the determination of BHA in commercial samples.     

Voltammetric Determination of Neotame by Using Chitosan/Nickelnanoparticles/Multi Walled Carbon Nanotubes Biocomposite as a Modifier

A selective and simple biosensor was prepared by immobilizing chitosan/nickelnanoparticles/multi-walled carbon nanotubes biocomposite on the glassy carbon electrode surface for voltammetric quantification of neotame. The properties and morphology of the modified electrode surfaces were characterized by scanning electron microscope (SEM), energy dispersive X-ray analysis (EDX). Electro oxidation of neotame on this modified surface was examined through cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. The biocomposite modified surface (Chi/NiNPs/MWCNTs/GCE) proposed in this study showed good electrocatalytic activity for neotame with an improved voltammetric peak current at 1.004 V, unlike the bare glassy carbon electrode (GCE) surface and several other modified surfaces. Under optimum conditions, Chi/NiNPs/MWCNTs/GCE gave linear SWV responses at the range of 2 μM ∼50 μM for neotame with 0.84 μM determination limit. This voltammetric sensor was successfully employed for the quantification of neotame on food samples and showed long-term stability, advanced voltammetric behavior, and good repeatability. Selective, accurate, and precise determination of neotame highlight the importance of this electrode in monitoring the control of food additives and ensures attract a great deal of attention.     

Room-Temperature Ionic Liquid and Multi-Walled Carbon Nanotube Composite Modified Carbon-Ceramic Electrode as a Sensitive Voltammetric Sensor for Indomethacin

The electrochemical behavior of indomethacin on the surface of a carbon-ceramic electrode modified with multi-walled carbon nanotubes and an ionic liquid composite film is reported. The results show that the nano-structured film exhibited excellent enhancement effects on the electrochemical oxidation of indomethacin. The developed sensor presented a linear response to indomethacin over the concentration range from 1 to 50 µM with a detection limit of 0.26 µM. The proposed modified electrode was employed for the determination of indomethacin in biological and pharmaceutical samples using differential pulse voltammetry.     

A Glassy Carbon Electrode Modified with LangmuirBlodgett Film Composed of DNA and Polyaniline for the Sensitive Determination of Salbutamol

A composite Langmuir? Blodgett film prepared from DNA and polyaniline was deposited on the surface of a glassy carbon electrode (GCE) to give a new voltammetric sensor for the β2‐agonist salbutamol (SAL). Cyclic voltammetry and electrochemical impedance spectroscopy were employed to study the characteristic of the modified electrode. The electrochemistry of SAL at the modified electrode was investigated at pH 6.8 by cyclic voltammetry and differential pulse anodic voltammetry. The oxidation of SAL at this electrode is an adsorption‐controlled irreversible process. A sensitive electroanalytical method for determination of SAL was worked out that displays high precision and good reproducibility. The method was applied to quantify SAL in tablets with satisfactory results.     

Electrochemical Determination of Pyrogallol at Conducting Poly(3,4‐ethylenedioxythiophene) Film‐Modified Screen‐Printed Carbon Electrodes

The electrochemical oxidation of pyrogallol at electrogenerated poly(3,4‐ethylenedioxythiophene) (PEDOT) film‐modified screen‐printed carbon electrodes (SPCE) was investigated. The voltammetric peak for the oxidation of pyrogallol in a pH 7 buffer solution at the modified electrode occurred at 0.13 V, much lower than the bare SPCE and preanodized SPCE. The experimental parameters, including electropolymerization conditions, solution pH values and applied potentials were optimized to improve the voltammetric responses. A linear calibration plot, based on flow‐injection amperometry, was obtained for 1–1000 µM pyrogallol, and a slope of 0.030 µA/µM was obtained. The detection limit (S/N=3) was 0.63 µM.     

Poly(aquachlorobis(1,10–phenanthroline)copper(II)iodidemonohydrate)/GCE for simultaneous determination of caffeine and theophylline in human serum,tea, and tablet samples

This paper presents metal complex based polymer film modified electrode for simultaneous determination of caffeine, and theophylline. Potentiodynamic fabrication of poly(aquachlorobis(1,10– phenanthroline)copper(II)iodidemonohydrate) modified glassy carbon electrode (poly(ACP₂CuIH)/GCE) was verified using cyclic voltammetric and electrochemical impedance spectroscopic techniques. In contrast to the unmodified glassy carbon electrode, the poly(ACP₂CuIH)/GCE in equi-molar mixture of theophylline and caffeine revealed sufficiently separated oxidative peaks with much enhanced peak current showing electrocatalytic property of the polymer film towards the oxidation of theophylline and caffeine. Under optimized solution pH and square wave voltammetric parameters, oxidative peak current response of poly(ACP₂CuIH)/GCE showed linear dependence on the concentration of caffeine and theophylline in the concentration range 1.0–200.0 µM with limit of detection 8.92 × 10^-3 µM for theophylline, and 1.02 × 10^{-2 µ}M for caffeine. Spike recovery in the range 97.0-102.4% for theophylline, and 95.4-100.0% for caffeine, interference recovery in the range 96.0–101.0% for theophylline, and 95.7–104.3% for caffeine, agreement of the detected amounts of theophylline and caffeine in tablet samples with the nominal values, and stability of the modified electrode all validated the developed method for simultaneous determination of theophylline and caffeine in wide range of real samples. The method was applied for simultaneous determination of both theophylline and caffeine in three tea brands (Black lion, Addis, and Wush wush), pharmaceutical tablet brands (Panadol extra, and Theodrine), and human blood serum samples making the method an excellent candidate.     

Electrocatalytic oxidation of thiosulfate on a modified nickel hexacyanoferrate film electrode

Summary A modified nickel hexacyanoferrate film glassy carbon electrode is prepared by the electrochemical deposition technique. The film is very stable upon voltammetric scanning in the potential range of 1.0 to –0.5 V (vs. SCE) and an oxidation peak occurs at 0.35 V (vs. SCE) (1 mol/l NaNO₃). The effects of electrolyte, solvent, coexisting ions and other variables on the voltammetric behaviour of the modified film have been studied. The thickness of the resulting film can be controlled by changing the number of voltammetric cycles and the concentrations of nickel(II) and hexacyanoferrate(III) ions. The film shows catalytic activity towards electrooxidation of thiosulfate with a peak potential +0.5 V (K^–-containing media). This oxidation potential of thiosulfate on the modified electrode is shifted negatively by about 550 mV as compared to the naked glassy carbon electrode. For practical application, the modified electrode can be used for the determination of thiosulfate in concentrations from 5.0×10^–5 to 1.0×10^–1 mol/l. This method has been successfully applied to the determination of thiosulfate in photographic waste effluents.     

Lead-doped carbon ceramic electrode as a renewable surface composite electrode for the preparation of lead dioxide film and detection of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine

Lead-doped carbon ceramic electrode as a new type of renewable composite electrode was prepared by mixing the lead powder with electrode matrix before gelation. Pb on the electrode surface was then converted to lead dioxide by the potential scanning of the composite electrode in 0.1 M NaOH solution in the range of ? 0.3 to 0.7 V versus SCE. The composition and morphology of the electrodes were studied by energy dispersive X-ray spectrometry, scanning electron microscopy, and atomic force microscopy techniques. Cyclic voltammetry and chronoamperometry techniques were also used to study the electrocatalytic activity of the modified electrode toward the oxidation of the l-tyrosine. The best results were obtained at a working potential of 0.45 V (vs. SCE) in 0.1 M NaOH solution. The sensor exhibited a good linear response in the range of 5–1458 µM with a coefficient of determination of 0.9963. The detection limit was 0.77 µM, and sensitivity was 37.4 μA mM^?1. In addition, the modified electrode showed high stability and interference-free response for to detection of the l-tyrosine.     

Fabrication of an Electrochemical Sensor Based on Multiwalled Carbon Nanotubes for Almotriptan

In the present work, the electrochemical behavior of an antimigraine drug, almotriptan malate (ALM), on a multiwalled carbon nanotube (MWCNT) film modified glassy carbon electrode under cyclic voltammetry was described for the first time. A significant enhancement in the oxidation peak current of ALM was noticed at MWCNT‐GCE. This property was exploited to develop a simple, sensitive and time‐saving differential pulse voltammetric method for the determination of ALM in bulk and pharmaceutical samples. A linear relationship was observed between concentration and peak current with a correlation coefficient of 0.9915 in the range of 0.25–37.5 µM ALM.