Synthesis of [3,3′(4H,4′H)‐Bi‐2H‐1,3‐oxazine]‐4,4′‐diones and Their Hydrolysis

The [3,3′(4H,4′H)‐bi‐2H‐1,3‐oxazine]‐4,4′‐diones 3a – 3i were obtained by [2+4] cycloaddition reactions of furan‐2,3‐diones 1a – 1c with aromatic aldazines 2a – 2d (Scheme 1). So, new derivatives of bi‐2H‐1,3‐oxazines and their hydrolysis products, 3,5‐diaryl‐1H‐pyrazoles 4a – 4c (Scheme 3), which are potential biologically active compounds, were synthesized for the first time.     

Eight New 2‐(2‐Phenylethyl)chromone (=2‐(2‐Phenylethyl)‐4H‐1‐benzopyran‐4‐one) Derivatives from Aquilaria malaccensis Agarwood

Eight new and eight known 2‐(2‐phenylethyl)chromone (=2‐(2‐phenylethyl)‐4H‐1‐benzopyran‐4‐one) derivatives, i.e., 1 – 8 and 9 – 16 , respectively, together with the two known sesquiterpenoids 17 and 18 were isolated from a 70% MeOH extract of Aquilaria malaccensis (AM) agarwood chips. Their structures were determined based on extensive spectroscopic analysis and comparison with reported data.     

Thermal Behaviors of 2‐(Dinitromethylene)‐1,3‐diazacycloheptane (DNDH)

2‐(Dinitromethylene)‐1,3‐diazacycloheptane (DNDH) was prepared by the reaction of 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) with 1,4‐diaminoethane in NMP. Thermal decomposition behavior of DNDH was studied under the non‐isothermal conditions with DSC method, and presents only one intensely exothermic decomposition process. The kinetic equation of the decomposition reaction is dα/dT=10^33.88×3α^2/3exp(−3.353×10⁵/RT)/β. The critical temperature of thermal explosion is 215.97°C. Specific heat capacity of DNDH was studied with micro‐DSC method and theoretical calculation method, and the molar heat capacity is 215.40 J·mol⁻¹·K⁻¹ at 298.15 K. Adiabatic time‐to‐explosion was calculated to be 92.07 s. DNDH has same thermal stability to FOX‐7.     

Thermal Behavior of 2‐(Dinitromethylene)‐1,3‐diazacyclopentane

A new compound, 2‐(dinitromethylene)‐1,3‐diazacyclopentane (DNDZ), was prepared by the reaction of 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) with 1,2‐diaminoethane in N‐methylpyrrolidone (NMP). Thermal decomposition of DNDZ was studied under non‐isothermal conditions by DSC, TG/DTG methods, and the enthalpy, apparent activation energy and pre‐exponential factor of the exothermic decomposition reaction were obtained as 317.13 kJ·mol^?1, 269.7 kJ·mol^?1 and 10^24.51 s^?1, respectively. The critical temperature of thermal explosion was 261.04°C. Specific heat capacity of DNDZ was determined with a micro‐DSC method and a theoretical calculation method, and the molar heat capacity was 205.41 J·mol^?1·K^?1 at 298.15 K. Adiabatic time‐to‐explosion was calculated to be a certain value between 263–289 s. DNDZ has higher thermal stability than FOX‐7.     

Synthesis of (4Z)‐4‐(Arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones by the Reaction of Ethyl (2Z)‐3‐Aryl‐2‐isothiocyanatoprop‐2‐enoates with Organolithium Compounds

A convenient one‐pot method for the preparation of (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones 2 and 3 from ethyl (2Z)‐3‐aryl‐2‐isothiocyanatoprop‐2‐enoates 1 , which can be easily prepared from ethyl 2‐azidoacetate and aromatic aldehydes, has been developed. Thus, these α‐isothiocyanato α,β‐unsaturated esters were treated with organolithium compounds, including lithium enolates of acetates, to provide 5‐substituted (4Z)‐4‐(arylmethylidene)‐5‐ethoxy‐1,3‐oxazolidine‐2‐thiones, 2 , and 2‐[(4Z)‐(4‐arylmethylidene)‐5‐ethoxy‐2‐thioxo‐1,3‐oxazolidin‐5‐yl]acetates, 3 .     

Palladium‐catalyzed three‐component cyclization of 2‐bromocyclohex‐1‐enecarboxylic acids with carbon monoxide and arylhydrazines leading to 2‐anilinohydroisoindoline‐1,3‐diones

2‐Bromocyclohex‐1‐enecarboxylic acids are carbonylatively cyclized with arylhydrazines or their hydrochlorides in tetrahydrofuran at 120 °C under carbon monoxide pressure in the presence of a catalytic amount of PdCl₂ and 1,3‐bis(diphenylphosphino)propane along with Et₃N to give 2‐anilinohydroisoindoline‐1,3‐diones. Copyright © 2015 John Wiley & Sons, Ltd.     

无气味、实用的缩硫醛/酮化反应试剂：2-（1，3-二噻-2-亚基）-3-羰基丁酸甲酯

a-Oxo ketene dithioacetals, methyl 2-（1,3-dithian/dithiolan-2-ylidene）-3-oxobutanoate （2a/2b） prepared in nearly quantitative yields simply from methyl acetylacetate, carbon disulfide and 1,3-dibromopropane/1,2-dibromoethane in the presence of potassium carbonate, were investigated in the thioacetalization with various carbonyl compounds 3. It has been demonstrated that methyl 2-（1,3-dithian-2-ylidene）-3-oxobutanoate （2a） could act as a nonthiolic, odorless and practical thioacetalization reagent. A range of aldehydes and ketones 3 were converted into the corresponding dithioacetals 4 in high yields （up to 91%） in the presence of 2a. Moreover, 2a showed high chemoselectivity between aldehyde and ketone in thioacetalization.     

Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with 2,2‐dimethylhydrazine leading to 1‐(dimethylamino)‐1H‐pyrrole‐2,5‐diones

β‐Bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with 2,2‐dimethylhydrazine under carbon monoxide pressure in THF in the presence of a catalytic amount of a palladium catalyst along with a base to give 1‐(dimethylamino)‐1H‐pyrrole‐2,5‐diones. Copyright © 2014 John Wiley & Sons, Ltd.     

Total Synthesis of the Biologically Active,Naturally Occurring 3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol and Regioselective O‐Demethylation of Aryl Methyl Ethers

3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol ( 2 ), a natural product, has been synthesized for the first time starting from (3‐bromo‐4,5‐dimethoxyphenyl)methanol ( 5 ) in five steps and with an overall yield of 34%. The reaction of some methoxymethyl‐substituted aryl methyl ethers with BBr₃, followed by the addition of MeOH, afforded the corresponding methoxymethyl‐substituted arylphenols in high yields.     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .     

Reaction of 3‐Hydroxyquinoline‐2,4‐diones with Isocyanates and Thermally Induced Transformation of the Reaction Products

3‐Hydroxyquinoline‐2,4‐diones 1 react with isocyanates to give novel 1,2,3,4‐tetrahydro‐2,4‐dioxoquinolin‐3‐yl (alkyl/aryl)carbamates 2 and/or 1,9b‐dihydro‐9b‐hydroxyoxazolo[5,4‐c]quinoline‐2,4(3aH,5H)‐diones 3 . Both of these compounds are converted, by boiling in cyclohexylbenzene solution in the presence of Ph₃P or 4‐(dimethylamino)pyridine, to give 3‐(acyloxy)‐1,3‐dihydro‐2H‐indol‐2‐ones 8 . All compounds were characterized by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, as well as by EI mass spectrometry.     

One‐Pot,Pseudo‐Five‐Component Synthesis of Bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones]

Synthesis and characterization of bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones] are described. The one‐pot, pseudo‐five‐component reaction of an aliphatic diamine, isothiocyanatobenzene, and dialkyl but‐2‐ynedioate at room temperature in anhydrous CH₂Cl₂ gives the title compound in relatively high yield. Under the same conditions, aromatic 1,2‐diamines yield 2‐(arylimino)‐N‐(enaminoaryl)‐1,3‐thiazolidin‐4‐ones in a pseudo‐four‐component reaction. Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

Synthesis and Spectral Properties of 4‐(2,5‐Dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO)

An interesting flourophore, 4‐(2,5‐dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) was synthesized by mixing an equivalent molar quantity of hippuric acid and 2,5‐dimethoxybenzaldehyde in acetic anhydride in the presence of anhydrous sodium acetate. The absorption and fluorescence characteristics of 4‐(2,5‐dimethoxy‐phenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) were investigated in different solvents. DMPO dye exhibits red shift in both absorption and emission spectra as solvent polarity increases, indicating change in the dipole moment of molecules upon excitation due to an intramolecular charge transfer interaction. The fluorescence quantum yield depends strongly on the properties of the solvents, which was attributed to positive and negative solvatokinetic effects. A crystalline solid of DMPO gave strong excimer like emission at 630 nm due to the excitation of molecular aggregates. This is expected from the idealized crystal structure of the dye that belongs to the B‐type class of Steven's Classification. DMPO displayed fluorescence quenching by triethylamine via nonemissive exciplex formation.     

A Convenient Synthesis of 1‐Alkoxy‐2‐alkyl‐1,2‐dihydroisoquinoline‐3,4‐diones Utilizing the Reaction of 2‐(Dialkoxymethyl)phenyllithiums with Dimethyl Oxalate

A new and convenient method for the preparation of 1,2‐dihydroisoquinoline‐3,4‐diones with alkoxy and alkyl groups at the 4‐ and 3‐positions, respectively, using an easily operated three‐step sequence starting from 2‐(dialkoxymethyl)phenyl bromides has been developed. Thus, the starting materials are treated with BuLi to generate 2‐(dialkoxymethyl)phenyllithiums, which are allowed to react with (COOMe)₂ to give methyl 2‐(dialkoxymethyl)phenyl‐2‐oxoacetates. These are then transformed into the corresponding secondary amides by the reaction with primary amines. Treatment of these keto amides with a catalytic amount of TsOH?H₂O affords the desired products. In order to demonstrate the synthetic utility of these products, transformation of one of them into the corresponding isoquinoline‐1,3,4(2H)‐trione derivative by the oxidation with PCC was achieved.     

Regioselective Synthesis of 6‐[Chloro(difluoro)methyl]salicylates by [3+3] Cyclocondensations of 1,3‐Bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐Chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one

The TiCl₄‐mediated [3+3] cyclocondensation of various 1,3‐bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one provides a regioselective access to novel 6‐(chlorodifluoromethyl)salicylates (=6‐(chlorodifluoromethyl)‐2‐hydroxybenzoates) with very good regioselectivity. For selected products, it was demonstrated that the CF₂Cl group can be transformed to CF₂H and CF₂(Allyl) by free‐radical reactions.     

Synthesis and Structure Characterization of 2‐(Dimethylaminomethyl)pyrrolate and 2,5‐Bis(dimethylaminomethyl)pyrrolate Zirconium Complexes

Tetrakis(diethylamido)zirconium reacts with 2‐(dimethylamino)methyl pyrrole (DMAMP) and 2,5‐[bis(dimethylamino)methyl]pyrrole (BDMAMP) to give Zr(NEt)₂(DMAMP)₂ 1 and Zr(NEt)₃(BDMAMP) 2 , respectively. Both 1 and 2 have been characterized by ¹H and ¹³C NMR spectroscopies and 1 has also been characterized by X‐ray crystallography. Complex 1 shows an agostic interaction between Zr and H(21A) in solid state that is not sustained in solution. Reacting 1 with 2 equivalents of trimethylsilyl chloride in toluene yields ZrCl₂(DMAMP)₂ 3 in 75% yield which was characterized by ¹H and ¹³C NMR spectroscopies.     

One‐Pot Synthesis of N,N‐Disubstituted (Z)‐4‐(Halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines from 2‐(2,2‐Dihaloethenyl)phenyl Isothiocyanates and Secondary Amines

We have developed a one‐pot procedure for the preparation of N,N‐disubstituted (Z)‐4‐(halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines 3 from 2‐(2,2‐dihaloethenyl)phenyl isothiocyanates 1 , easily accessible from known 2‐(2,2‐dihaloethenyl)benzenamines by a three‐step sequence, and secondary amines. Thus, the isothiocyanates 1 react with secondary amines to afford the corresponding thiourea derivatives, of which the treatment with NaH provides the desired products.     

Synthesis of 1,3‐Dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates via Intramolecular Cyclization of 2‐[2‐(Dimethoxymethyl)phenyl]‐ 2‐hydroxyalkanoates Followed by Oxidation

A novel and efficient method for the preparation of 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 4 under mild conditions has been developed. Thus, the reaction of [2‐(dimethoxymethyl)phenyl]lithiums, generated easily from 1‐bromo‐2‐(dimethoxymethyl)benzenes 1 , with α‐keto esters gives the corresponding 2‐[2‐(dimethoxymethyl)phenyl]‐2‐hydroxyalkanoates 2 . The TsOH‐catalyzed cyclization of these hydroxy acetals is followed by the oxidation of the resulting cyclic acetals 3 with PCC to give the desired products in satisfactory yields. The reaction of [2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]lithium with (MeOC?O)₂, followed by treatment with NaBH₄ or organolithiums, affords 2‐[2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]‐2‐hydroxyalkanoates 6 , which can similarly be transformed into the corresponding 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 7 in reasonable yields.     

Regioselective Synthesis of 4‐(Arylsulfanyl)‐2‐hydroxyhomophthalates by [4+2] Cycloaddition of 3‐(Arylsulfanyl)‐1‐(trimethylsilyloxy)buta‐1,3‐dienes with Dimethyl Penta‐2,3‐dienedioate

The [4+2] cycloaddition of 3‐(arylsulfanyl)‐1‐(trimethylsilyloxy)buta‐1,3‐dienes with dimethyl penta‐2,3‐dienedioate provides a convenient and regioselective approach to a variety of 4‐(arylsulfanyl)‐2‐hydroxyhomophthalates.     

Efficient Synthesis of (3E)‐3‐[Amino(aryl)methylidene]chromane‐2,4‐diones (=(3E)‐3‐[Amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) via a Three‐Component Reaction

The Michael‐type addition of a 4‐hydroxycoumarin (=4‐hydroxy‐2H‐1‐benzopyran‐2‐one) 1 to a β‐nitrostyrene (=(2‐nitroethenyl)benzene) 2 in the presence of AcONH₄ leads to substituted (3E)‐3‐[amino(aryl)methylidene]chroman‐2,4‐diones (=(3E)‐3‐[amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) 4 (Table 1). High yields, short reaction time, and easy workup are advantages of this novel one‐pot three‐component reaction.