On-line capillary electrophoresis-mass spectrometry using dopant-assisted atmospheric pressure photoionization: setup and system performance

The on-line coupling of capillary electrophoresis (CE) and mass spectrometry (MS) via atmospheric pressure photoionization (APPI) is demonstrated. To achieve CE-APPI-MS, an adapted coaxial sheath-flow interface was combined with an ion-trap mass spectrometer equipped with an APPI source originally designed for liquid chromatography-MS. Effective photoionization of test compounds was accomplished after optimization of several interface and MS parameters, and of the composition and flow rate of the sheath liquid. Further enhancement of the ionization efficiency could be achieved by adding a dopant, such as acetone or toluene, to the sheath liquid to aid indirect ionization. Acetone significantly increased the ionization of the polar test compounds by proton transfer, while toluene was more useful for the enhanced formation of molecular ions from nonpolar compounds. The effect of several common CE background electrolytes (BGEs) on the APPI-MS response of the analytes was also studied. It appeared that in contrast with electrospray ionization, nonvolatile BGEs do not cause suppression of analyte signals using APPI. Therefore, in CE-APPI-MS, a variety of buffers can be chosen, which obviously is a great advantage during method development. Remarkably, also sodium dodecyl sulfate (SDS) did not affect the photoionization of the test compounds, indicating a strong potential of APPI for the on-line coupling of micellar electrokinetic chromatography (MEKC) and MS.     

Solute-solvent interactions in micellar electrokinetic chromatography: IV. Characterization of electroosmotic flow and micellar markers

A wide study of the compounds and procedures mostly used to determine the electroosmotic flow (EOF) and micelle elution times has been done in seven different micellar electrokinetic chromatography (MEKC) systems. These systems are formed from mixtures of an aqueous buffer with the surfactants sodium dodecyl sulfate, lithium dodecyl sulfate, lithium perfluorooctane sulfonate, sodium cholate, sodium deoxycholate, tetradecyltrimethylammonium bromide and hexadecyltrimethylammonium bromide. The solvation parameter model has been used to evaluate the usefulness of the compounds studied as EOF or micellar markers in each of the seven MEKC systems. It is demonstrated that methanol, acetonitrile and formamide are the best EOF markers, and that dodecanophenone is the best micellar marker.     

Comparison of electrospray ionization and atmospheric pressure photoionization for coupling of micellar electrokinetic chromatography with ion trap mass spectrometry

The performance of dopant-assisted atmospheric pressure photoionization (DA-APPI) and electrospray ionization (ESI) for the coupling of micellar electrokinetic chromatography (MEKC) with ion trap mass spectrometry (ITMS) was compared using a set of test drugs comprising basic amines, steroids, esters, phenones and a quaternary ammonium compound. The influence of the surfactant sodium dodecyl sulfate (SDS) on analyte signals was studied by infusion of sample through the CE capillary into the respective ion sources. It was found that background electrolytes (BGEs) containing 20-50mM SDS in 10mM sodium phosphate (pH 7.5) caused major ionization suppression for both polar and apolar compounds in ESI-MS, whereas APPI-MS signal intensities remained largely unaffected. ESI gave rise to the formation of SDS clusters, which occasionally may cause space-charge effects in the ion trap. Furthermore, extensive sodium-adduct formation was observed for medium polar compounds with ESI-MS, whereas these compounds were detected as their protonated molecules with APPI-MS. Using the BGE containing 20mM SDS, MEKC-ESI-MS still provides slightly lower limits of detection (LODs) (2.6-3.1muM) than MEKC-APPI-MS (4.3-6.4muM) for basic amines. For less polar compounds, highest S/Ns were obtained with APPI-MS detection (LODs, 4.5-71muM). For BGEs containing 50mM SDS, the limits of detection for MEKC-APPI-MS were more favorable (factor 1.5-12) than MEKC-ESI-MS for nearly all tested drugs. Spray shield contamination by SDS was lower in DA-APPI-MS than in ESI-MS. It is concluded that DA-APPI shows the most favorable characteristics for MEKC-MS, especially when compounds of low polarity have to be analyzed.     

Borate-containing background electrolytes to improve CE separation in bare capillaries

The paper describes how borate-containing BGEs modify ζ-potential and so EOF in bare fused silica capillaries. This surface modification can be used to suppress EOF and improve the separation performance of CZE including capillary sieving electrophoresis (CSE). Boric acid forms complexes with polysaccharides used as sieving matrices in CSE and other compounds containing hydroxyl groups, including polyol bases such as Tris, triethanolamine, and Bis-Tris propane. High concentration of boric acid in BGEs leads to a strong interaction of boric acid with the silica surface of the capillary wall and this suppresses or even completely eliminates ζ-potential and EOF. Using a polyol base with several charge-carrying amino groups, such as Bis-Tris propane, can actually reverse EOF. We demonstrate the use of various borate-containing BGEs in bare fused silica capillaries for size-separation of DNA fragments, size-separation of proteins by SDS CSE, and also by CZE in the absence of any sieving matrix.     

Nonaqueous versus aqueous capillary electrophoresis of alpha-helical polypeptides: effect of secondary structure on separation selectivity

The CE separation of alpha-helical polypeptides composed of 14-31 amino acid residues has been investigated using aqueous and nonaqueous BGEs. The running buffers were optimized with respect to pH. Generally, higher separation selectivities were observed in nonaqueous electrolytes. This may be explained by a change in the secondary structure when changing from water to organic solvents. Circular dichroism spectra revealed a significant increase in helical structures in methanol-based buffers compared to aqueous buffers. This change in secondary structure of the polypeptides contributed primarily to the different separation selectivity observed in aqueous CE and NACE. For small oligopeptides of two to five amino acid residues no significant effect of the solvent was observed in some cases while in other cases a reversal of the migration order occurred when changing from aqueous to nonaqueous buffers. As these peptides cannot adopt secondary structures the effect may be attributed to a shift of the pKa values in organic solvents compared to water.     

Use of 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolytes in capillary electrophoresis for the analysis of inorganic anions

Separation of inorganic anions in CE is often a challenging task because the electrophoretic mobilities of inorganic anions are comparable to or even greater than the EOF mobility. In this study, we present the use of ionic liquids (ILs) as background electrolytes (BGEs) in CE of inorganic anions. The 1-alkyl-3-methylimidazolium-based ILs as BGEs dynamically coated the capillary wall and induced a reversed EOF. This allowed the anions to comigrate with the EOF and yielded a rapid separation. Increasing the alkyl chain length of the ILs and BGE concentration can significantly improve the separation resolution. With 40 mM 1-butyl-3-methylimidazolium tetrafluoroborate as BGE, good separations of five model anions (Br-, I-, NO2(-), NO3(-), and SCN-) were achieved in a range of buffer pH values. The separation efficiency was as high as 34 600-155 000, and the RSDs of the migration times were less than 0.8% (n = 5).     

A fresh look into background electrolyte selection for capillary electrophoresis‐laser induced fluorescence of peptides and proteins

This study reports a reinvestigation of background electrolyte selection strategy for performance improvement in CE‐LIF of peptides and proteins. This strategy is based on the employment of high concentrations of organic species in BGE possessing high buffer capacity and low specific conductivity in order to ensure excellent stacking preconcentration and separation resolution of fluorescently tagged peptides and proteins. Unlike universal UV detection, the use of such BGEs at high concentrations does not lead to degradation of LIF detection signals at the working excitation and emission wavelengths. At the same buffer ionic strength, pH and electric field, an “inorganic‐species‐free” BGE (or ISF BGE) for CE‐LIF of fluorescently labeled beta amyloid peptide Aβ 1–42 (a model analyte) offered a signal intensity and peak efficiency at least three‐times higher than those obtained with a conventional BGE normally used for CE‐LIF, while producing an electric current twice lower. Good peak performance (in terms of height and shape) was maintained when using ISF BGEs even with samples prepared in high‐conductivity phosphate buffer saline matrix. The advantageous features of such BGEs used at high concentrations over conventional ones in terms of high separation resolution, improved signal intensities, tuning of EOF magnitudes and minimization of protein adsorption on an uncoated fused silica capillary are demonstrated using Alexa‐488‐labelled trypsin inhibitor. Such BGE selection approach was applied for investigation of separation performance for CE‐LIF of ovalbumin labelled with different fluorophores.     

Investigation of solvent effects in capillary electrophoresis for the separation of biological porphyrin methyl esters

The effects of organic solvents on the capillary electrophoresis (CE) separation of a number of important biological porphyrin methyl esters - six weakly basic, hydrophobic cyclic tetrapyrroles possessing two and four to eight methyl ester groups around the periphery of the porphyrin ring - were investigated in the mode of micellar electrokinetic chromatography (MEKC), microemulsion electrokinetic chromatography (MEEKC), and nonaqueous CE. In aqueous MEKC, partial separation of the six neutral porphyrin methyl esters was obtained with an organic modifier (acetonitrile) in the concentration range between 20 and 40%, in which sodium dodecyl sulfate (SDS) molecules might be present in the form of SDS micelles and/or SDS micelle-like aggregates. Relatively stable SDS micelles can be formed in nonaqueous MEKC using formamide as the separation medium, but the separation of the target analytes remained unsatisfactory. Improved resolution of all six porphyrin methyl esters was obtained using MEEKC with the running buffer consisting of 0.8% w/w n-heptane (oil phase), 2.25% w/w SDS and 1.0% w/w Brij 35 (mixed surfactant), 6.6% w/w 1-butanol (cosurfactant), and 30% v/v 2-propanol (second cosurfactant), but reproducibility in terms of peak areas for certain porphyrins (especially uroporphyrin I octamethyl ester) was found to be very poor. Best separation performances were achieved with nonaqueous CE separations in which the weakly basic porphyrin methyl esters were protonated under strongly acidic conditions (e.g., using 10 mM perchloric acid) in mixed organic solvents. For example, using a 50:50 mixture of methanol and acetonitrile as the separation medium, baseline separation of all six (positively charged) porphyrin methyl esters can be obtained within 3 min and the average precision (RSD, N = 13) in terms of migration time and peak area were 0.55 and 2.16%, respectively.     

Synthesis of a single-isomer sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions and its use for the electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes. Part 2: Heptakis(2-O-methyl-6-O-sulfo) cyclomaltoheptaose

The sodium salt of heptakis(2-O-methyl-6-O-sulfo)cyclomaltoheptaose (HMS), the second single-isomer, sulfated beta-CD carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 23 weak base analytes in acidic aqueous and methanolic BGEs. HMS interacted strongly with only about half of the analytes studied. The good separation selectivities and favorable normalized EOF mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 23 weak base analytes in the aqueous BGEs, often with separation selectivity values complimentary to those obtained with other single-isomer sulfated CDs. HMS did not prove to be as good a resolving agent in acidic methanolic BGEs as its counterpart, heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose.     

Directed control of electroosmotic flow in nonaqueous electrolytes using poly(ethylene glycol) coated capillaries

Poly(ethylene glycol) (PEG)-coated capillaries exhibit unique properties in nonaqueous electrolytes. Immobilized PEG interacts significantly with different cations present in nonaqueous electrolytes. This can induce a positive surface charge on PEG-coated capillaries and results in an adjustable anodic electroosmotic flow (EOF) in nonaqueous electrolytes whereas a reduced cathodic EOF is observed in aqueous electrolytes. The EOF can reversibly be adjusted by the variation of the electrolyte constitution, namely the type of the solvent used and the nature and concentration of background cations. In methanol and especially in acetonitrile electrolytes the magnitude and also the direction of EOF is strongly dependent on the water content. Using different alkali metal cations, the EOF can be increased, reduced, or even reversed depending on the nature of the cation. The directed manipulation of EOF in methanolic electrolytes using PEG-coated capillaries was applied for optimization of nonaqueous capillary electrophoretic separations of acidic compounds with regard to reproducibility, resolution, and analysis time.     

Capillary electrochromatographic separation of enantiomers on chemically bonded type of cellulose derivative chiral stationary phases with a positively charged spacer

Positively charged chiral stationary phases (CSPs) were prepared for capillary electrochromatography (CEC) separation of enantiomers by chemically immobilizing cellulose derivatives onto diethylenetriaminopropylated silica (DEAPS) with tolylene-2,4-diisocyanate (TDI) as a spacer reagent. Anodic electroosmotic mobility was observed in both nonaqueous and aqueous mobile phases due to the positively charged amines on the surface of the prepared CSPs. For comparison, the traditionally used 3-aminopropyl silica (APS) was also adopted as the base material instead of DEAPS to prepare CSP. It was observed that the EOF on the DEAPS-based CSP was 18%-60% higher than that on the APS-based CSP under nonaqueous mobile phase conditions. Separation of enantiomers in CEC was performed on the positively charged CSPs with the nonaqueous mobile phases of pure ethanol or mixture of hexane-alcohol and the aqueous phases of acetonitrile-water or 95% ethanol. Fast separation of enantiomers was achieved on the newly prepared CSPs.     

Sensitivity enhancement in capillary electrophoresis-mass spectrometry of anionic metabolites using a triethylamine-containing background electrolyte and sheath liquid

Analyte responses in CE‐ESI‐MS using negative ionization are frequently relatively low, thereby limiting sensitivity in metabolomics applications. In order to enhance the ionization efficiency of anionic metabolites, BGEs and sheath liquids (SLs) of various compositions were evaluated. Pressure‐induced infusion and CE‐MS experiments showed that addition of triethylamine (TEA) to the BGE and SL enhanced analyte intensities. A BGE consisting of 25 mM TEA (pH 11.7) and an SL of water–methanol (1:1, v/v) containing 5 mM TEA was selected, providing separation and detection of ten representative test metabolites with good reproducibility (migration time RSDs<1%) and linearity (R²>0.99). This BGE yielded lower limits of detection (0.7–9.1 μM) for most test compounds when compared with common CE‐MS methods using a BGE and SL containing ammonium acetate (NH₄Ac) (25 and 5 mM, respectively). CE‐MS of human urine revealed an average amount of 231 molecular features in negative ionization mode when TEA was used in the BGE and SL, whereas 115 and 102 molecular features were found with an NH₄Ac‐containing BGE and SL, employing a bare fused‐silica (BFS) and Polybrene‐dextran sulfate‐Polybrene (PB‐DS‐PB)‐coated capillary, respectively. With the CE‐MS method using TEA, about 170 molecular features were observed that were not detected with the NH₄Ac‐based CE‐MS methods. For more than 82% of the molecular features that were detected with the TEA as well as the NH₄Ac‐containg BGEs (i.e. common features), the peak intensities were higher using TEA with gain factors up to 7. Overall, the results demonstrate that BGEs and SLs containing TEA are quite favorable for the analysis of anionic metabolites in CE‐MS.     

NACE for the analysis of acrylamide in food

An NACE method was developed for the quantitative determination of acrylamide in processed food. The method is premised on the modification of the aqueous acid-base character of acrylamide in an organic solution. Acrylamide, which is a polar molecule in aqueous solution, in a low-pH environment in ACN acquires a proton, and thereby migrates under its own electrophoretic mobility in CE. Thus, nonaqueous separation of acrylamide was achieved by employing 30 mmol/L HClO(4) in ACN as the running electrolyte. The detection limit of the method for acrylamide was found as 0.041 mg/L using UV detection at 200 nm. The run-to-run and day-to-day precisions for the corrected peak areas were calculated as 1.65 and 3.90%, respectively. The applicability of the method has been demonstrated by analyzing acrylamide in the samples of potato chips and French fries. The method is simple, rapid, inexpensive, and widely applicable for the determination of acrylamide in food samples.     

Analysis of major alkaloids in Rhizoma coptidis by capillary electrophoresis-electrospray-time of flight mass spectrometry with different background electrolytes

CE-based techniques with DAD and detection ESI-TOF-MS have been developed for the analysis of seven protoberberine alkaloids and one aporphinoid alkaloid in Huanglian (Rhizoma coptidis), a well-known traditional Chinese herbal medicine. One aqueous BGE and one nonaqueous BGE were developed for CE-DAD and CE-MS analyses, and the CE-ESI-TOF-MS conditions including nebulizer gas pressure, the sheath-liquid composition, its flow rate, etc. were optimized. Eight main alkaloids in R. coptidis could be separated with baseline resolution by CE-DAD with these two different BGEs, and identified by TOF-MS analysis. Moreover, three major alkaloids (berberine, palmatine, and jatrorrhizine) could be quantified accurately by CE-DAD and CE-MS with the BGE system consisting of 50:50 v/v water and ACN containing 50 mM ammonium acetate at pH 6.8. Both techniques provided similar LODs and could be applied with confidence within similar linear dynamic range. However, reproducibility and speed of analysis were better using CE-DAD. When the CE technique was compared with the RP-HPLC method, the CE-DAD and CE-MS methods provided greater efficiency and faster analysis speed, i.e., achieving baseline resolution for all the eight main basic compounds in less than 14 min. The CE method, as a viable alternative to HPLC, is suitable for use as a routine procedure for the rapid identification and quantification of basic compounds in herbal or natural product applications.     

Comparison of three different anionic surfactants for the separation of hydrophobic compounds by nonaqueous capillary electrophoresis

The effect of the three different surfactants, sodium dodecyl sulfate (SDS), diethylhexyl sodium sulfosuccinate (AOT), and taurodexycholic acid sodium salt (STDC) on the nonaqueous capillary electrophoretic separations of hydrophobic compounds were compared with formamide containing 20 mM K2HPO4 as electrolyte solvent. Separations of all selected uncharged hydrophobic compounds, e.g., p-arylacetophones were shown to be strongly dependent on the kind of surfactant. The electrolyte containing 180 mM SDS provided the best result for the selected samples.     

Continuous beds with vancomycin as chiral stationary phase for capillary electrochromatography

Enantiomeric separations in capillary electrochromatography (CEC) carried out using a continuous-bed chiral stationary phase (CSP) based on the macrocyclic antibiotic, vancomycin, is presented. The continuous beds were prepared from methacryloxypropyl modified fused silica capillaries (100 microm ID) by in situ copolymerization of N-(hydroxymethyl)acrylamide and piperazine diacrylamide with vinyl sulfonic acid comonomer used to introduce ionic functionality and thus a strong electroosmotic flow (EOF). The CSP was subsequently prepared by immobilizing the vancomycin stationary phase by reductive amination. Preliminary results have indicated that an extremely strong EOF is obtained in both the nonaqueous polar organic (15.2 x 10(-5) cm2 V(-1) s(-1) and the aqueous reversed-phase modes of operation (8.5 x 10(-5) cm2 V(-1) s(-1)). Enantioselectivity was obtained for four racemic compounds, the best of which was in the case of thalidomide which was separated in 10 minutes with high resolution (Rs = 2.5) and efficiency (120,000 plates meter(-1)) values.     

Nonaqueous capillary electrophoresis in pharmaceutical analysis

This review presents different solvents and electrolytes commonly used as BGEs in NACE for the analysis of pharmaceutical compounds. Most NACE applications carried out since 1998 for the analysis of compounds of pharmaceutical interest are presented in four tables: (i) analysis of drugs and related substances, (ii) analysis of chiral substances, (iii) analysis of phytochemical extracts and (iv) analysis of drugs in biological fluids. These selected examples are used to illustrate the interest in NACE versus conventional aqueous CE.     

Study of intact virus‐like particles of human papillomavirus by capillary electrophoresis

Virus‐like particles of human papillomavirus (HPV‐VLP), resulting from the self‐assembly of the capsid proteins (L1 or L1 and L2), have been widely used to study HPV as they are similar to the native virion. Moreover, two prophylactic vaccines, Gardasil^® and Cervarix^®, are based on HPV‐VLP L1. Analytical techniques currently used to characterize HPV‐VLP, such as SDS‐PAGE, Western blot, ELISA, are time‐consuming and semiquantitative. In this study, CE was evaluated for the analysis of intact HPV16‐VLP. The usefulness of capillary inner wall coating as well as various BGEs, pH, and detergent additives were investigated. Reproducible HPV‐VLP analysis in CE was achieved using poly(ethylene oxide)‐coated capillary and a BGE containing high salt concentration and low SDS concentration. The developed method enables HPV‐VLP detection in less than 10 min (migration times RSD: 1.6%). The identity of HPV‐VLP peak was confirmed by comparison with a sample obtained from a wild‐type baculovirus and with VLP‐based vaccine, Gardasil^®, after adjuvant dissolution. Finally, we applied the developed methodology to VLP‐based vaccines, demonstrating that CE could be successfully used for vaccine quality control.     

Capillary electrophoresis-atmospheric pressure chemical ionization-mass spectrometry using an orthogonal interface: Set-up and system parameters

The feasibility of atmospheric pressure chemical ionization (APCI) as an alternative ionization technique for capillary electrophoresis-mass spectrometry (CE-MS) was investigated using a grounded sheath-flow CE-MS sprayer and an orthogonal APCI source. Infusion experiments indicated that highest analyte signals were achieved when the sprayer tip was in close vicinity of the vaporizer entrance. The APCI-MS set-up enabled detection of basic, neutral, and acidic compounds, whereas apolar and ionic compounds could not be detected. In the positive ion mode, analytes could be detected in the entire transfer voltage range (0–5 kV), whereas highest signal intensities were observed when the corona discharge current was between 1000 and 2000 nA. In the negative ion mode, the transfer voltage typically was 500 V and the optimum corona discharge current was 6000 nA. Analyte signals were raised with increasing nebulizing gas pressure, but the pressure was limited to 25 psi to avoid siphoning and current drops. Signal intensities appeared to be optimal and constant over a wide range of sheath liquid flow rate (5–25 μL/min) and vaporizer temperature (200–350 °C). APCI-MS signals were unaffected by the composition of the background electrolyte (BGE), even when it contained sodium phosphate and sodium dodecyl sulfate (SDS). Consequently, BGE composition, sheath-liquid flow rate, and vaporizer temperature can be optimized with respect to the CE separation without affecting the APCI-MS response. The analysis of a mixture of basic compounds and a steroid using volatile and nonvolatile BGEs further demonstrates the feasibility of CE-APCI-MS. Detection limits (S/N = 3) were 1. 6–10 μM injected concentrations.