α‐Peptide–Oligourea Chimeras: Stabilization of Short α‐Helices by Non‐Peptide Helical Foldamers

Short α‐peptides with less than 10 residues generally display a low propensity to nucleate stable helical conformations. While various strategies to stabilize peptide helices have been previously reported, the ability of non‐peptide helical foldamers to stabilize α‐helices when fused to short α‐peptide segments has not been investigated. Towards this end, structural investigations into a series of chimeric oligomers obtained by joining aliphatic oligoureas to the C‐ or N‐termini of α‐peptides are described. All chimeras were found to be fully helical, with as few as 2 (or 3) urea units sufficient to propagate an α‐helical conformation in the fused peptide segment. The remarkable compatibility of α‐peptides with oligoureas described here, along with the simplicity of the approach, highlights the potential of interfacing natural and non‐peptide backbones as a means to further control the behavior of α‐peptides.     

Foldamers to Nanotubes: Influence of Amino Acid Side Chains in the Hierarchical Assembly of α,γ4‐Hybrid Peptide Helices

Supramolecular assembly of various artificially folded 12‐helical architectures composed of γ⁴‐Val, γ⁴‐Leu and γ⁴‐Phe residues is investigated. In contrast to the 12‐helices composed of γ⁴‐Val and γ⁴‐Leu residues, the helices with γ⁴‐Phe residues displayed unique elongated nanotubular architectures. The elongated nanotube assembly was further explored as a template for biomineralization of silver ions to silver nanowires. A comparative study using an analogous α‐peptide helix reveals the importance of the spatial arrangement of aromatic side chains along the helical cylinder in a 12‐helix. These results suggested that the proteolytically and structurally stable α,γ⁴‐hybrid peptide 12‐helices may serve as a new generation of potential templates in the design of functional biomaterials.     

Synthesis of α‐alkenyl‐β‐hydroxy adducts by α‐addition of unprotected 4‐bromocrotonic acid and amides with aldehydes and ketones by chromium(II)‐mediated reactions

The regioselective and diastereoselective chromium(II)‐mediated reactions of 4‐bromocrotonic acid or amides with aldehydes and ketones can proceed without the need to protect protic sites to generate the respective α‐alkenyl‐β‐hydroxy adducts, i.e. formally the addition of the α‐anion of a carboxylic acid or amide to an oxo‐compound is featured. Copyright © 2016 John Wiley & Sons, Ltd.     

具有β-(1→6)-半乳吡喃糖骨架和α-L-(1→3)-阿拉伯呋喃糖侧链的阿拉伯半乳寡糖的简易合成

4-Methoxyphenyl glycoside of β-D-Galp-(1→6)-[α-L-Araf-(1→3)-]β-D-Galp-(1→6)-β-D-Galp-(1→6)-{β-D-Galp-(1→6)-[α-L-Araf-(1→3)-]β-D-Galp-(1→6)-β-D-Galp-(1→6)-}2β-D-Galp-(1→6)-[α-L-Araf-(1→)3)-]β-D-Galp-(1→)6)-β-D-Galp was synthesized with 2,3,4,6-tetra-O-benzoyl-α-D-galactopyranosyl trichloroacetimidate (1), 6-O-acetyl-2,3,4-tri-O-benzoyl-α-D-galactopyranosyl trichloroacetimidate (11), 4-methoxyphenyl 3-O-allyl-2,4-tri-O-benzoyl-β-D-galactopyranoside (2),isopropyl 3-O-allyl-2,4-tri-O-benzoyl--thio-β-D-galactopyranoside (12),4-methoxyphenyl 2,3,4-tri-O-benzoyl-β-D-galactopyranoside (5), and 2,3,5-tri-O-benzoyl-α-L-arabinofuranosyl trichloroacetimidate (8) as the key synthons.     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

手性噁唑硼烷催化α-和β-氨基酮不对称还原反应立体选择性的AM1过渡态模型研究

AM1 transition state (TS) models were developed for the enanfioselecfivifies in the reductions of α-and β-aminoketones catalyzed by (S)-4-benzyl-5,5-diphenyl-1,3,2-oxazaborolidine. The result showed that β-aminoketone gave better enanfioselectivity than its α-analog. Different chiralifies of the final products were obtained, R for the former and S for the latter. These semiempirical TS models are consistent with the experimental data.     

Efficient Synthesis of Differentiated syn‐1,2‐Diol Derivatives by Asymmetric Transfer Hydrogenation–Dynamic Kinetic Resolution of α‐Alkoxy‐Substituted β‐Ketoesters

Asymmetric transfer hydrogenation was applied to a wide range of racemic aryl α‐alkoxy‐β‐ketoesters in the presence of well‐defined, commercially available, chiral catalyst Ru^II–(N‐p‐toluenesulfonyl‐1,2‐diphenylethylenediamine) and a 5:2 mixture of formic acid and triethylamine as the hydrogen source. Under these conditions, dynamic kinetic resolution was efficiently promoted to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters derived from substituted aromatic and heteroaromatic aldehydes with a high level of diastereoselectivity (diastereomeric ratio (d.r.)>99:1) and an almost perfect enantioselectivity (enantiomeric excess (ee)>99 %). Additionally, after extensive screening of the reaction conditions, the use of Ru^II‐ and Rh^III‐tethered precatalysts extended this process to more‐challenging substrates that bore alkenyl‐, alkynyl‐, and alkyl substituents to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters with excellent enantiocontrol (up to 99 % ee) and good to perfect diastereocontrol (d.r.>99:1). Lastly, the synthetic utility of the present protocol was demonstrated by application to the asymmetric synthesis of chiral ester ethyl (2S)‐2‐ethoxy‐3‐(4‐hydroxyphenyl)‐propanoate, which is an important pharmacophore in a number of peroxisome proliferator‐activated receptor α/γ dual agonist advanced drug candidates used for the treatment of type‐II diabetes.     

Aggregation behavior of poly(γ‐benzyl‐L‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L‐glutamate) rod‐coil‐rod triblock copolymer in N,N‐dimethylformamide

Solution property of poly(γ‐benzyl‐L ‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L ‐glutamate) (GIG copolymer) was studied by using dynamic light scattering and static light scattering for N,N‐dimethylformamide (DMF) solution and DMF/toluene mixed solutions. GIG copolymer proved to aggregate in DMF and under DMF‐rich condition, that is, high‐polar region. The aggregate decreased in size, and completely disappeared under toluene‐rich condition, that is, low‐polar region. The correlation between solubility parameter and aggregate size of GIG copolymer in the DMF/toluene solution systems quantitatively demonstrated how strongly polarity caused by hydrogen bond made an impact on the aggregation behavior. Because the main driving force to the aggregation under DMF‐rich condition originates with polyisoprene (PIP) blocks, the aggregate in DMF is considered to be a core‐shell micelle consisting of flexible PIP core surrounded by rigid poly(γ‐benzyl‐L ‐glutamate) (PBLG) shell. The values of dimensionless parameter ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, revealed that a single chain of GIG copolymer had the form of rigid rod with flexibility, that is, once‐broken rod, caused by the incorporation of a flexible PIP chain between two rigid PBLG rods in the DMF/toluene solution system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1740–1748, 2010     

Simultaneous Stabilization and Multimerization of a Peptide α‐Helix by Stapling Polymerization

Maintaining specific conformations of peptide ligands is crucial for improving the efficacy of biological interactions. Here, a one‐pot polymerization strategy for stabilizing the α‐helical conformation of peptides while simultaneously constructing multimeric ligands is presented. The new method, termed stapling polymerization, uses radical polymerization between acryloylated peptide side chains and vinylic monomers. Studies with model peptides indicate that i, i+7 crosslinking is effective for the helix stabilization, whereas i, i+4 crosslinking is not. The stapling polymerization results in the formation of peptide–polyacrylamide conjugates that include ≈3–16 peptides in a single conjugate. This stapling polymerization provides a simple but powerful methodology to fabricate multimeric α‐helices that can further be developed to modulate multivalent biomacromolecular interactions.

     

胆甾-4α-甲基-8-烯-3β，7α-二醇二乙酸酯的结构与性质研究

Lophenol, cholest-4α-methyl-7-en-3β-ol (1), obtained from Dracaena cochinchinensis (Lour.) S. C. Chen, was structurally modified. It was acetylated to protect 3β-hydroxyl group, and then oxidised by selenium dioxide in acetic acid to give cholest-4a-methyl-8-en-3β, Ta-diol diacetate (3). This compound 3 is unstable in chloroform solution or when heated and easily converted to a diene compound, cholest-4a-methyl-7,14-dien-3β-ol acetate (4). The structures of 3 and 4 were elucidated by means of IR, ^1H NMR, ^13C NMR and MS, and the absolute configuration of 3 was established by X-ray crystallography. The property of 3 was also discussed in this paper. Both 3 and 4 are new compounds and were reported for the first time.     

Mono‐ and Dinuclear Heteroleptic Cobalt Complexes with α‐Diimine and Polyarene Ligands

Reactions of the dimeric cobalt complex [(L^?Co)₂] ( 1 , L=[(2,6‐iPr₂C₆H₃)NC(Me)]₂) with polyarenes afforded a series of mononuclear and dinuclear complexes: [LCo(η⁴‐anthracene)] ( 2 ), [LCo(μ‐η⁴:η⁴‐naphthalene)CoL] ( 3 ), and [LCo(μ‐η⁴:η⁴‐phenanthrene)CoL] ( 4 ). The pyrene complexes [{Na₂(Et₂O)₂}{LCo(μ‐η³:η³‐pyrene)CoL}] ( 5 ) and [{Na₂(Et₂O)₃}{LCo(η³‐pyrene)}] ( 6 ) were obtained by treating precursor 1 with pyrene followed by reduction with Na metal. These complexes contain three potential redox active centers: the cobalt metal and both α‐diimine and polyarene ligands. Through a combination of X‐ray crystallography, EPR spectroscopy, magnetic susceptibility measurement, and DFT computations, the electronic configurations of these complexes were studied. It was determined that complexes 2 – 4 have a high‐spin Co^I center coupled with a radical α‐diimine ligand and a neutral polyarene ligand. Whereas, the ligand L in complexes 5 and 6 has been further reduced to the dianion, the cobalt remains in a formal (I) oxidation state, and the pyrene molecule is either neutral or monoanionic.     

Azo-coupling Decarboxylation Reaction of α-Carboxy Ketene Dithioacetals in Water-a New Route to 1,2-Diaza-1,3-butadienes

Under basic conditions,a series of 4,4-dialkylthio-1,2-diaza-1,3-butadienes were synthesized in good to excel-lent yields via a novel azo-coupling decarboxylation reaction by reacting α-carboxyl ketene dithioacetals witharyldiazonium salts in aqueous medium.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Liquid-Phase Synthesis of Methyl （2Z）-2-Arylsulfonylmethyl-2-alkenoates from PEG-Supported a-Phenylselenopropionate

Treatment of lithio derivativ e of novel PEG-supported a-phenylselenopropionate with aldehydes, followed by oxidation-elimination with 30% hydrogen peroxide, formed Baylis-Hillman products, which were then reacted with sodium arylsulfinate. The resulting sulfonylated products were cleaved from the PEG efficiently affording methyl （2Z）-2-arylsulfonylmethyl-2-alkenoates in good yields and high purities.     

Synthesis and Structure of α/δ‐Hybrid Peptides—Access to Novel Helix Patterns in Foldamers

Origami peptides : A novel class of foldamers consisting of α/δ‐hybrid peptides has been investigated theoretically and experimentally by exploiting the rigidity of the side chain of a new δ‐amino acid prepared from D ‐glucose and D ‐xylose with a furanose side chain (see figure).