Voltammetric Determination of Acibenzolar‐S‐Methyl Using a Renewable Silver Amalgam Film Electrode

Acibenzolar‐S‐methyl (ASM) is a novel fungicide applied for crop protection. A renewable silver amalgam film electrode was used for the determination of ASM in pH 3.4 Britton? Robinson buffer using square wave adsorptive stripping voltammetry (SW AdSV). The parameters of the method were optimized. The electroanalytical procedure made possible to determine ASM in the concentration range of 5×10^?8–3×10^?7 mol L^?1 (LOD=4.86×10^?9, LOQ=1.62×10^?8 mol L^?1). The effect of common interfering pesticides and heavy metal ions was checked. The validated method was applied in ASM determination in spiked water samples.     

Voltammetric Determination of 4‐Nitrophenol and 5‐Nitrobenzimidazole Using Different Types of Silver Solid Amalgam Electrodes – A Comparative Study

The voltammetric behavior of two genotoxic nitro compounds (4‐nitrophenol and 5‐nitrobenzimidazole) has been investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a polished silver solid amalgam electrode (p‐AgSAE), a mercury meniscus modified silver solid amalgam electrode (m‐AgSAE), and a mercury film modified silver solid amalgam electrode (MF‐AgSAE). The optimum conditions have been evaluated for their determination in Britton‐Robinson buffer solutions. The limit of quantification (L_Q) for 5‐nitrobenzimidazole at p‐AgSAE was 0.77 µmol L^?1 (DCV) and 0.47 µmol L^?1 (DPV), at m‐AgSAE it was 0.32 µmol L^?1 (DCV) and 0.16 µmol L^?1 (DPV), and at MF‐AgSAE it was 0.97 µmol L^?1 (DCV) and 0.70 µmol L^?1 (DPV). For 4‐nitrophenol at p‐AgSAE, L_Q was 0.37 µmol L^?1 (DCV) and 0.32 µmol L^?1 (DPV), at m‐AgSAE it was 0.14 µmol L^?1 (DCV) and 0.1 µmol L^?1 (DPV), and at MF‐AgSAE, it was 0.87 µmol L^?1 (DCV) and 0.37 µmol L^?1 (DPV). Thorough comparative studies have shown that m‐AgSAE is the best sensor for voltammetric determination of the two model genotoxic compounds because it gives the lowest L_Q, is easier to prepare, and its surface can be easily renewed both chemically (by new amalgamation) and/or electrochemically (by imposition of cleaning pulses). The practical applicability of the newly developed methods was verified on model samples of drinking water.     

Voltammetric determination of herbicide molinate in river water and rice samples using solid silver amalgam electrode fabricated with nanoparticles

The evaluation of the voltammetric behaviour and the determination of herbicide molinate were performed for the first time over the surface of solid amalgam electrode fabricated with silver nanoparticles using cyclic voltammetry and square-wave voltammetry techniques. The experimental and instrumental parameters were evaluated to reach the maximum analytical response for molinate. It was achieved when a medium composed of 0.04 mol L^?1 Britton–Robinson buffer at the pH value of 4.0 was used. Under these conditions, molinate showed one pronounced reduction peak at E_p = ?0.37 V (vs. Ag/AgCl 3 mol L^?1) that was characterised as an irreversible system. An analytical curve was constructed at the concentration range from 9.36 to 243.49 µg L^?1 and a limit of detection of 2.34 µg L^?1 was obtained. The amalgam electrode presented good stability during the measurements with relative standard deviation (RSD) values of 2.9% for the repeatability and 5.4% for the reproducibility. The voltammetric method developed here could be conveniently applied for the determination of molinate in river water and rice spiked samples at levels below those established on the legislations of European Union and Brazil with good accuracy (RSD of less than 5% for all samples). Comparison with HPLC technique was carried out and the results indicated satisfactory concordance. According to the results depicted here, the silver nanoparticles solid amalgam electrode showed itself highly sensitive and an interesting alternative for the routine analysis of molinate in water and food samples. Furthermore, it introduces an environmentally acceptable alternative to the mercury electrodes, most commonly used for determination of reducible pesticides.     

Ruthenium Hexacyanoferrate (III) Modified Glassy Carbon Electrode for Determination of Captopril

A glassy carbon electrode modified with a ruthenium (III) hexacyanoferrate film was investigated for the determination of captopril in pharmaceutical formulations. The RuOHCF film was deposited on the surface of the electrode after applying 50 successive cycles and subsequent stabilization in a mixture of NaNO₃ 0.50 mol L^?1+HCl 0.050 mol L^?1 used as supporting electrolyte. The main processes responsible for the redox electrode response are attributed to the system Ru^II/Ru^III/Ru^IV, and appeared at ?0.080, 0.86 and 1.01 V (vs. SCE). The redox process at ?0.080 V was selected for the determination of captopril in the present study, once it provided higher sensibility and occurs in a lower potential than the other ones which can prevent interferences. The experimental parameters used in the determination of the analyte, using differential pulse voltammetry were optimized: pulse amplitude: 50 mV, scan rate: 5 mV s^?1 and potential window: ?0.5 to 0.2 V (vs. SCE). The analytical application of the sensor in real samples demonstrated a linear range between 0.060 and 0.80 µmol L^?1 (r=0.998) with a detection limit of 0.047 µmol L^?1. A mechanism based on co‐precipitation of captopril and the Ru (III) complex in the film is presented once the signal of the Ru^II/III redox couple decreases with increasing the analyte concentration. Recoveries of 99 to 100 % were achieved in pharmaceutical samples and the proposed procedure agreed with the HPLC official method within 95 % confidence level, according to the t‐Student test.     

Application of renewable silver amalgam annular band electrode to voltammetric determination of vitamins C, B1 and B2

In this work, the design and results of applying silver liquid amalgam film-modified silver solid amalgam annular band electrode (AgLAF-AgSAE), refreshed before each measurement, to voltammetric determination of vitamins C (VC), B₁ (VB1) and B₂ (VB2) are presented. The method is based on adsorptive accumulation of analytes at the AgLAF-AgSAE in a phosphate buffer (VB1), phosphate buffer with Triton X-100 (VB2) and an alkaline borate buffer with Triton X-100 (VC). The analytical parameters and procedure of electrode activation were optimized. The calibration graphs obtained for vitamins C, B₁ and B₂ are linear, respectively, for concentration range 0.05-12, 0.01-0.1 and 0.05-3 mg L⁻¹. The detection limits were calculated and equaled 0.02, 0.003 and 0.009 mg L⁻¹, while repeatability of the peak current was 2%, 1% and 3%, respectively. These results are comparable with results obtained for polarographic determination of the same vitamins using mercury electrodes. Finally, the AgLAF-AgSAE was applied to the determination of vitamins in pharmaceutical samples and fruit juices with satisfactory results.     

Electrochemical Study of Moroxydine and its Voltammetric Determination with a Silver Amalgam Film Electrode

Moroxydine (Mor.) is an antiviral agent of biguanide structure. The paper presents a new silver amalgam film electrode (Hg(Ag)FE) for determination of Mor. in phosphate buffer, pH 6.2 (LOD=4×10^?9 mol L^?1, LOQ= 1×10^?8 mol L^?1) and in spiked urine using square wave adsorptive stripping voltammetry. It was found that the compound can act as an electrocatalyst not only at hanging mercury drop electrode but also at the Hg(Ag)FE. The electrode mechanism is connected with the hydrogen evolution reaction catalyzed by moroxydine. Adsorption of moroxydine at the mercury electrode was studied and special arrangements of molecules enabling electron transfer of the protonated form of moroxydine is suggested.     

Electrochemical study and voltammetric determination of sodium diethyldithiocarbamate using silver nanoparticles solid amalgam electrode

We report in this work, for the first time, the voltammetric study and the development of an electroanalytical method for the determination of sodium diethyldithiocarbamate (Na-DDC) using solid amalgam electrode fabricated with silver nanoparticles. The experimental parameters were studied and the best voltammetric response was reached when using 0.02 mol L^–1 Britton–Robinson buffer (pH = 5.5). Cyclic voltammograms of the substance presented two voltammetric signals: one cathodic peak at E_p = – 0.55 V and one anodic peak at E_p = – 0.49 V. The redox process of Na-DDC showed itself as an adsorption-controlled and quasi-reversible system. A mechanism for this electrochemical reaction was proposed. The analytical studies employed square-wave adsorptive stripping voltammetry (SWAdSV) and were based on the cathodic signal given by Na-DDC. Good linearity was observed in the concentration range from 2.83 × 10^–7 mol L^–1 to 6.89 × 10^–6 mol L^–1. The obtained limit of detection was 7.26 × 10^–8 mol L^–1. The electroanalytical approach described here was successfully employed for the determination of Na-DDC in river water at levels of concentration from 1.46 × 10^–7 mol L^–1 to 1.46 × 10^–6 mol L^–1 with good repeatability and reproducibility (RSD values of 4.2% and 5.9%, respectively). The values found during these determinations presented good concordance when compared with the expected values. According to the data presented here, the solid amalgam electrode fabricated with silver nanoparticles may be seen as an effective and green tool for the electrochemical analysis of Na-DDC and also other reducible compounds that usually require mercury-based electrode surfaces.     

Sensitive voltammetric determination of gallium in aluminium materials using renewable mercury film silver based electrode

Simple cyclic renewable silver amalgam film electrode (Hg(Ag)FE), applied for the determination of gallium(III) using differential pulse anodic stripping voltammetry (DP ASV), is presented. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimised. The calibration graph is linear from 5?nM (0.35?µg?L^?1) to 80?nM (5.6?µg?L^?1) for a preconcentration time of 60?s, with correlation coefficient of 0.995. For a Hg(Ag)FE with a surface area of 9.9?mm² the detection limit for a preconcentration time of 120?s is as low as 0.1?µg?L^?1. The repeatability of the method at a concentration level of the analyte as low as 3.5?µg?L^?1, expressed as RSD is 3.2% (n?=?5). The proposed method was successfully applied by studying the synthetic samples and simultaneously recovery of Ga(III) from spiked aluminium samples.     

Voltammetric Determination of Azidothymidine Using Silver Solid Amalgam Electrodes

A new simple and direct electroanalytical method was developed for the determination of azidothymidine in commercial pharmaceutical preparations. It is based on differential pulse voltammetry at silver solid amalgam electrode with polished surface (p‐AgSAE) or surface modified by mercury meniscus (m‐AgSAE). The electroreduction of azidothymidine in basic media at these electrodes gives rise to one irreversible cathodic peak. Its potential in 0.05 mol L^?1 borate buffer, pH 9.3 at ca. ?1050 mV is comparable to that using hanging mercury drop electrode (HMDE). Achieved limits of quantitation are in the 10^?7 mol L^?1 concentration range for both amalgam electrodes. According to the procedure based on the standard addition technique, the recoveries of known amounts of azidothymidine contained in pharmaceutical preparations available in capsules were 101.4±1.8% (m‐AgSAE), 100.3±3.5% (p‐AgSAE) and 102.0±1.0% (HMDE) (n=10). There was no significant difference between the values gained by proposed voltammetric methods and the HPLC‐UV recommended by the United States Pharmacopoeia regarding the mean values and standard deviations.     

Amperometric Biosensor Based on Enzymatic Reactor for Choline Determination in Flow Systems

A simple, selective and stable biosensor with the enzymatic reactor based on choline oxidase (ChOx) was developed and applied for the determination of choline (Ch) in flow injection analysis with amperometric detection. The enzyme ChOx was covalently immobilized with glutaraldehyde to mesoporous silica powder (SBA‐15) previously covered by NH₂‐groups. This powder was found as an optimal filling of the reactor. The detection of Ch is based on amperometric monitoring of consumed oxygen during the enzymatic reaction, which is directly proportional to Ch concentration. Two arrangements of an electrolytic cell in FIA, namely wall‐jet cell with working silver solid amalgam electrode covered by mercury film and flow‐through cell with tubular detector of polished silver solid amalgam were compared. The experimental parameters affecting the sensitivity and stability of the biosensor (i. e. pH of the carrier solution, volume of reactor, amount of the immobilized enzyme, the detection potential, flow rate, etc.) were optimized. Under the optimized conditions, the limit of detection was found to be 9.0×10^?6 mol L^?1. The Michaelis‐Menten constant for covalently immobilized ChOx on SBA‐15 was calculated. The proposed amperometric biosensor with the developed ChOx‐based reactor exhibits good repeatability, reproducibility, long‐term stability, and reusability. Its efficiency has been confirmed by the successful application for the determination of Ch in two commercial pharmaceuticals.     

Determination of Blasticidin S in Spiked Rice Using SW Voltammetry with a Renewable Silver Amalgam Film Electrode

Blasticidin S (BS) was determined in spiked rice samples by square wave voltammetry (SWV) and square wave stripping voltammetry (SWSV) using a cyclic renewable silver amalgam film electrode (Hg(Ag)FE). It was found that the compound can act as an electrocatalyst. In Britton? Robinson buffer at pH 7.0 a signal connected with the hydrogen evolution reaction was detected at ?1.2 V versus Ag/AgCl. Validation of the method was carried out. The detection and quantification limits were found to be 2.13×10^?8 mol L^?1; 7.10×10^?8 mol L^?1 for SWV and 2.65×10^?9 mol L^?1; 8.85×10^?9 mol L^?1 for SWSV, respectively.     

Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

Voltammetric study and electroanalytical determination of contraceptive levonorgestrel using silver solid amalgam electrode fabricated with nanoparticles

Here we describe the investigation of the electrochemical behaviour and the electroanalytical quantification of hormonal contraceptive levonorgestrel using solid amalgam electrode fabricated with silver nanoparticles. Until now, to the best of our knowledge, this is the first report of the use of solid working electrodes for levonorgestrel determination. Over this electrodic surface, the substance showed one cathodic peak at E_p = ?1.41 V. Moreover, the electrochemical reduction of levonorgestrel was defined as an irreversible and mainly adsorption-controlled process involving two protons and two electrons. Square-wave adsorptive stripping voltammetry (SWAdSV) was used for the quantification of levonorgestrel. The instrumental and experimental parameters were studied and optimized. The best conditions of analysis were observed when using 0.04 mol L^?1 Britton–Robinson (BR) buffer at pH 6.0. The analytical signal of levonorgestrel showed a linear dependence on the concentration range from 5.03 × 10^?7 mol L^–1 to 1.01 × 10^?5 mol L^–1. The LOD and LOQ obtained were 9.09 × 10^?8 mol L^?1 and 3.03 × 10^?7 mol L^?1, respectively. The voltammetric method was employed for the quantification of levonorgestrel in real pharmaceutical formulations and urine samples. The results provided good concordance with the expected values. It makes the working electrode used here an interesting and less toxic option for the analysis of reducible substances in comparison with the HMDE.     

Adsorptive Stripping Voltammetric Determination of Trace Uranium with a Bismuth‐Film Electrode Based on the U(VI)→U(V) Reduction Step of the Uranium‐Cupferron Complex

This work reports the use of adsorptive stripping voltammetry (AdSV) for the determination of uranium on a preplated rotating‐disk bismuth‐film electrode (BiFE). The principle of the method relied on the complexation of U(VI) ions with cupferron and the subsequent adsorptive accumulation of the complex on the surface of the BiFE. The uranium in the accumulated complex was then reduced by means of a cathodic voltammetric scan while the analytically useful U(VI)→U(V) reduction signal was monitored. The experimental variables as well as potential interferences were investigated and the figures of merit of the method were established. Using the selected conditions, the 3σ limit of detection for uranium was 0.1 μg L^?1 at a preconcentration time of 480 s and the relative standard deviation was 4.7% at the 5 μg L^?1 level for a preconcentration time of 120 s (n=8). The accuracy of the method was established by analyzing a reference sea water sample.     

Determination of Zirconium and Vanadium in Natural Waters by Adsorptive Stripping Voltammetry in the Presence of Cupferron,Oxalic Acid and 1,3‐Diphenylguanidine

A sequential AdSV method based on the accumulation of Zr(IV) and V(V) as cupferron‐oxalic acid‐1,3‐diphenylguanidine (COD) complexes at the HMDE was used to determine traces of these metals in samples with different ionic strengths. DP mode, E_ads ?0.6 and ?0.2 V (vs. Ag/AgCl, 3 mol L^?1 KCl), t_ads 400 and 20 s and 10 and 60 mV s^?1 scan rates were used for Zr(IV) and V(V), respectively. E_peak were ?0.95 (Zr(IV)‐COD) and ?0.65 V(V(V)‐COD). The methodology was applied in samples of rivers, estuaries (in Germany and Brazil) and coastal and open seawater.     

Electroanalytical Determination of Morpholine as a Corrosion Inhibitor at a Cathodically Pretreated Boron-Doped Diamond Electrode

An electroanalytical method for the determination of morpholine, a corrosion inhibitor, was developed at a cathodically pretreated boron-doped diamond electrode (BDDE). The voltammetric response of morpholine at the BDDE in 0.1?mol L^?1 KCl (pH 10) shows an irreversible oxidation process at approximately 1.3?V vs. Ag/AgCl in 3.0?mol L^?1 KCl. Using cyclic voltammetry, the number of electrons involved in the morpholine electroxidation mechanism was found to be 1. The application of chronoamperometry showed that the apparent diffusion coefficient (D₀) was 2.99?×?10^?6 cm² s^?1. Using square wave voltammetry under the optimized conditions (frequency of 30.0?Hz, pulse amplitude of 100?mV and step potential of 20?mV at pH 10.0), the developed method provided limits of detection and quantification of 2.1 and 6.9?mg L^?1, respectively, with a linear range from 5.0 to 100.0?mg L^?1 (r?=?0.991). Intraday (n?=?10) and interday (two consecutive day) precision values assessed as the relative standard deviation for solutions containing 30.0, 60.0, and 90.0?mg L^?1 of morpholine were from 0.41 to 5.86% and 0.92 to 3.19%, respectively. The feasibility of the method for the interference-free determination of morpholine was verified by the analysis of synthetic boiler water samples containing CaCO₃, Na₂SO₃, Na₃PO_4, FeCl₃, and humic acid as organic matter. In addition, hydrazine was added as a possible interfering compound because of its widespread use in corrosion inhibition. Recovery values from 90.9 to 109.4% were obtained in the synthetic boiler water, thereby attesting to the accuracy of the method.     

Voltammetric Determination of N,N‐Dimethyl‐4‐amine‐carboxyazobenzene at a Silver Solid Amalgam Electrode

The voltammetric behavior of N,N‐dimethyl‐4‐amino‐2′‐carboxyazobenzene was investigated by differential pulse voltammetry (DPV) at a mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.4 to 15 μmol L^?1.     

Stripping voltammetric determination of silver(I) at carbon paste electrode modified with 3-amino-2-mercapto quinazolin-4(3H)-one

A differential pulse anodic stripping voltammetric method was developed for the determination of Ag(I) at a 3-amino-2-mercapto quinazolin-4(3H)-one modified carbon paste electrode. The analysis procedure consisted of an open circuit accumulation step in stirred sample solution for 12 min. This was followed by medium exchange to a clean solution where the accumulated Ag(I) was reduced for 15 s in −0.6 V. Subsequently an anodic potential scan was effected from −0.2 to +0.2 V to obtain the voltammetric peak. The detection limit of silver(I) was 0.4 μg L⁻¹ and R.S.D. for 10, 100 and 200 μg L⁻¹ silver(I) were 2.4, 1.8 and 1.3%, respectively. The calibration curve was linear for 0.9-300 μg L⁻¹ silver(I). Many coexisting ions had little or no effect on the determination of silver(I). The procedure was applied to determination of silver(I) in X-ray photographic films and natural waters. In X-ray photographic film samples, the results have compared to those obtained by atomic absorption spectroscopy.     

Determination of Titanium In Quartz and Silica Glass Samples By Adsorptive Stripping voltammetry

ABSTRACT

This article presents a method for determination of titanium in quartz and silica glass samples based on adsorptive stripping voltammetry (AdSV) with mandelic acid. Hanging mercury drop electrode as a working electrode was used. The optimized conditions include: pH 3.3, accumulation potential –0.15 V, accumulation time 90 s, scan rate 10 mV/s, pulse amplitude 25 mV. In case of 5 min accumulation time the obtained detection limit was 6.5×10^-9 mol/L Ti. ET-AAS was applied as a reference method to AdSV measurements. The procedure for decomposition of quartz and silica glass samples applying small amount of acids is described.     

Determination of Trace Amount of Lead(II) in Sweet Fruit‐Flavored Powder Drinks by Differential Pulse Adsorptive Stripping Voltammetry at Carbon Paste Electrode

A new method is described for the determination of lead based on the cathodic adsorptive stripping of the lead–nuclear fast red (NFR) at a carbon paste electrode (CPE). The differential pulse voltammograms of the adsorbed complex of lead–NFR are recorded from ?0.10 to ?0.60 V (versus Ag/AgCl electrode). Optimal conditions were found to be an electrode containing 25% paraffin oil and 75% high purity graphite powder, 4.0×10^?5 mol L^?1 NFR; buffer solution (pH of 3.0), accumulation potential and time, ?0.20 V, 60 and 120 s (for high and low concentration of lead), respectively. The results show that the complex can be adsorbed on the surface of the CPE, yielding one peak at ?0.34 V, corresponding to reduction of NFR in the complex at the electrode. The detection limit was found to be 0.2 ng mL^?1 with a 120s accumulation time. The linear ranges are from 0.5 to 50 (t_acc=120 s) and 50 to 200 ng mL^?1 (t_acc=60 s). Application of the procedure to the determination of lead in lake water, bottled mineral water, synthetic samples and sweet fruit‐flavored powder drinks samples gave good results.