超临界CO2萃取与水蒸气蒸馏法研究泽兰中挥发性有机物

以超临界CO2萃取法(SFE)提取中药泽兰中的挥发性有机物,经气相色谱-质谱联用(GC-MS)分析,人工解析质谱图及计算机谱库检索相结合进行化学成分结构鉴定,用面积归一化法计算各组分的相对含量。SFE法提取的产率为0.78%,共鉴定75种挥发性化合物,主要成分为植醇、石竹烯氧化物、十六酸、亚油酸、葎草烯等,比文献报道的该挥发油成分多且含量差异较大,其中松香芹醇、蒲勒烯、马鞭烯酮、香芹酮、十六酸、亚油酸、葎草烯、十六酸乙酯、亚麻酸等多种成分未见报道。与水蒸气蒸馏法(SD)提取的泽兰挥发油进行比较,后者提取的产率为0.12%,从中鉴定出50种化合物,主要成分为石竹烯氧化物、柠檬烯、α-蒎烯、葎草烯、月桂烯等。SFE与SD得到的成分仅有31种相同,其它各不相同。     

气相色谱-质谱技术分析红松松塔挥发性成分

采用水蒸气蒸馏法,对红松松塔挥发性成分进行提取和研究,最佳蒸馏时间5.5 h,挥发油提取率1.28%.利用气相色谱-质谱联用技术对提取的挥发油成分进行分析,共鉴定出32种化学成分,主要为单萜和倍半萜类化合物,其中相对含量较高的有α-蒎烯(44.258%)、D-柠檬烯(23.426%)、β-蒎烯(8.674%)、石竹烯(3.462%)、β-月桂烯(3.018%)等.研究结果表明红松松塔挥发油中富含α-蒎烯、D-柠檬烯、石竹烯等多种具有药理活性的成分.因此,红松松塔是一种具有较好前景的天然药用资源.     

气相色谱-质谱法分析蘘荷花穗挥发油化学成分

采用水蒸气蒸馏法提取黔产蘘荷花穗挥发油，并用气相色谱-质谱对其成分进行定性分析和峰面积相对含量的测定．共鉴定出45个化学成分，占挥发油总量的95．89％．主要成分为β-水芹烯(34．96％)、α-律草烯(13．09％)、β-榄香烯(7．31％)、β-蒎烯(6．50％)、α-水芹烯(6．07％)、α-蒎烯(3．87％)、β-石竹烯(3．18％)等。     

气相色谱-质谱技术分析红松松塔挥发性成分

采用水蒸气蒸馏法，对红松松塔挥发性成分进行提取和研究，最佳蒸馏时间5.5h，挥发油提取率1.28％。利用气相色谱-质谱联用技术对提取的挥发油成分进行分析，共鉴定出32种化学成分，主要为单萜和倍半萜类化合物，其中相对含量较高的有α-蒎烯（44．258％）、D-柠檬烯（23．426％）、β-蒎烯（8.674％）、有石竹烯（3.462％）、β-月桂烯（3.018％）等。研究结果表明红松松塔挥发油中富含α-蒎烯、D-柠檬烯、石竹烯等多种具有药理活性的成分。因此，红松松塔是一种具有较好前景的天然药用资源。     

GC-MS联用技术结合化学计量学方法分析厚朴叶挥发油成分

利用水蒸气蒸馏法提取湖南产厚朴叶的挥发油成分,采用GC-MS联用技术结合化学计量学方法(直观推导式演进特征投影法和选择性离子法)进行分析,同时结合程序升温保留指数辅助定性。结果共鉴定出54种化合物,占挥发油总量的84.95%。主要化学成分为α-、β-和γ-桉油醇,含量分别为13.10%、28.21%和14.67%。此外,含量较高的化合物还有α-蒎烯(2.96%)、芳樟醇(1.71%)、丹皮酚(1.88%)、石竹烯(2.04%)、佛术烯(3.60%)、α-瑟林烯(3.84%)和[1AR-(1Aα,4α,4Aβ,7Bα)]-1A,2,3,4,4A,5,6,7B-八氢化-1,1,4,7-四甲基-1H-环丙烯并[E]奥(1.34%)。研究表明,将化学计量学方法用于中药挥发油成分的分析可提高定性分析的准确性。所得结果可为厚朴药植物资源的开发利用提供依据。     

广西产湿地松松针挥发性成分的提取及分析

采用水蒸气蒸馏法提取湿地松针叶挥发油的油相部分,用乙醚萃取法提取蒸馏残液中的水溶性挥发性组分,利用气相色谱-质谱联用分析比较二者的化学成分。湿地松挥发油油相部分的得油率为0.277%,共分离出86个色谱峰,鉴定了其中的49种化合物,占总含量的92.12%,油相部分的主要成分有β-蒎烯（14.29%）、吉马烯（12.87%）、α-蒎烯（6.79%）、β-石竹烯（6.15%）、α-石竹烯（1.58%）;水溶性部分的得油率为0.0682%,鉴定了其中的6种化合物,占水溶性部分总量的60.72%,α-松油醇（24.61%）为水溶性部分的主要成分。由于增加了水溶部分精油的提取,湿地松松针挥发油总的产油率提高到0.3452%,提高率达24.62%。     

火炬松挥发物的固相微萃取-气相色谱/质谱法分析

采用固相微萃取(SPME)技术,结合气相色谱/质谱(GC-MS)分析了火炬松枝条和针叶中的挥发性化合物,共鉴定了30种化学成分。其中枝条中分离鉴定出21种挥发性成分。主要成分为α-蒎烯、β-蒎烯、β-月蒎烯、反式-石竹烯、β-杜松烯、大根叶烯-D;针叶中分离鉴定出24种挥发性成分,主要成分为α-蒎烯、β-蒎烯、β-月桂烯、β-水芹烯、异长叶烯、反式-石竹烯、α-律草烯、大根叶烯-D、双环吉马烯和双环榄香烯。     

硬尖神香草挥发油化学成分研究

硬尖神香草(Hyssopus Cuspidatus Boriss.)属唇形科植物,分布在新疆北部广大地区,是新疆维吾尔族医用药“祖发”来源之一。有关硬尖神香草挥发油的化学成分,文献记载主要含l-蒎茨酮(l-Pinocamphone),全草挥发油经分离纯品,波谱鉴定确证主要成分为d-松香芹酮(d-Pinocarvone),与文献记载不一致。同时分离得l-蒎莰酮、β-蒎烯和1,8-桉叶素3种含量较     

大高良姜超临界CO2萃取产物及 GC-MS分析

大高良姜为姜科植物大高良姜Alpinia galanga(L.)Willd的干燥根茎[1].分布在广东、海南、广西、云南等地.具有温胃、散寒止痛的药效[2].大高良姜与高良姜有区别,过去曾以大高良姜作高良姜用[3],对高良姜化学成分研究较多[4,5],而对大高良姜化学成分未见系统研究.本文首次采用超临界CO2流体萃取技术从大高良姜中萃取出挥发油,用GC-MS方法测定其化学成分,从大高良姜挥发油中鉴定出40个化合物,其中以1,8-桉叶素(1,8-cineole)、反式-α-甜没药烯(trans-alpha-bisabolene)、十五烷(pentadecane)、佛手甘油烯(berganotene)、1'-4-乙酰氧基胡椒酚醋酸酯(1'-4-acetoxychavicot acetate)、1'-乙酰氧基丁香油酚乙酸酯(1'-acetoxyengenol acetate)、乙酸(4-烯丙基)苯酯(4-allyl phenyl acetate)等为主.     

顶空萃取-气相色谱-质谱法分析马鞭草的挥发油组分

采用顶空萃取-气相色谱-质谱法分离和鉴定马鞭草挥发油化学成分,用归一化法测定其相对含量.鉴定出64个组分,其含量占总挥发油组分峰面积的97.76%.主要成分是乙酸(3.55%)、芳樟醇(4.41%)、反-石竹烯(9.30%)、反-β-金合欢烯(3.99%)、律草烯(5.61%)、α-姜黄烯(8.50%)、十五烷(8.48%)、γ-芹子烯(3.75%)、β-没药烯(5.66%)、β-杜松烯(3.57%).     

对氨基酚络合萃取机理的探讨

对氨基酚络合萃取机理的探讨;对氨基酚; 络合萃取; 萃取机理; 萃取反应热     

Focused microwave aqueous extraction of chlorophenols from solid matrices and their analysis by chromatographic techniques

Open-vessel focused microwave (FMW) extraction with a purely aqueous carbonate solution was used for the extraction of chlorophenols from various solid matrices. After SPE on C18-bonded silica, the analytes were determined as such by LC-UV or, as their acetyl derivatives, by GC-ECD. The FMW aqueous extraction is efficient and rapid and no organic solvents are used. PCP was detected in several solid samples, with recoveries of 101-115% (RSD, 2-4%) relative to Soxhlet extraction. Similar recoveries were obtained for the other chlorophenols for spiked samples.     

超声辅助液液萃取法提取烟用香精成分的研究

采用超声辅助液液萃取法(ULLE)提取某品牌烟用香精成分,GC-MS对其进行分析,研究了不同萃取剂、萃取时间和萃取温度对分析结果的影响,初步确定了最佳条件为:以二氯甲烷为萃取剂,饱和NaCl溶液作水相,室温下超声萃取5 min.又分别与同时蒸馏萃取法(SDE)和传统的液液萃取法(LLE)作以比较,对ULLE法和SDE法鉴定出的化学成分、重现性和定量值进行了对比.结果表明:超声辅助液液萃取具有操作简便、快速、节能、萃取效率高、重现性好等特点,适合于烟用香精成分的提取.     

杂粮中总黄酮的提取及含量测定的实验设计

通过学生分组，采用溶剂提取法，超声提取法和微波提取法等提取方法，测定了小米、糜子、青稞、荞麦和高梁等杂粮中黄酮含量，结果表明5种杂粮中，青稞中总黄酮的含量最高。该综合实验能够锻炼大学生运用所学实验技术解决实际问题的能力，适合作为高年级本科综合实验项目开设。     

中草药化学成分提取新技术

介绍五种提取新技术棗微波萃取技术、超临界二氧化碳萃取技术、超声波提取技术、半仿生提取技术和酶法的原理和特点,以及这些新技术近年来在中草药化学成分提取工艺中的研究应用现状,并展望了它们的应用前景。     

Improved extraction and clean-up of imidazolinone herbicides from soil solutions using different solid-phase sorbents

Extraction and quantification of herbicide residues from soil are important in understanding the behaviour of persistent herbicides. This research investigated extraction and clean-up methods for imidazolinone herbicides from soil and soil amended with organic material. A series of solvent mixes, pH conditions and sorbents was tested. Across three imidazolinone herbicides: imazapyr, imazethapyr and imazaquin, 0.5 M NaOH extraction gave greater than 90% recovery from soil samples; however, 0.5 M NaOH:MeOH (80:20) resulted in higher recovery for imazaquin, but not for the other two herbicides. Of the sorbents tested, the use of chromatographic mode sequencing using C₁₈ and SCX sorbents provided consistent high (>85%) recovery of all three herbicides from soil and separation of the herbicides from other soil components by high performance liquid chromatography (HPLC). These two methods will allow high recovery of these imidazolinone herbicides from soil and have the ability to detect these herbicides without interference from other soil components.     

Supercritical fluid extraction

Supercritical fluid extraction (SFE) provides for the first time a viable option to conventional and widely used Soxhlet extraction. The ability to change the solvating power of a single supercritical fluid by changing its density is an exceedingly attractive feature. An environmentally safe alternative such as supercritical carbon dioxide to organochlorine solvents which are widely used today in many government and industrial analytical laboratories for sample preparation is desirable. SFE may also constitute a viable alternative to other popular sample preparation techniques such as liquid-liquid extraction, solid phase extraction and purge/trap. Much research, however, must be done in order to understand, optimize and apply this technology. For example, (a) automation of extraction, (b) matrix effects, (c) new fluids/modifiers/additives, (d) trapping efficiency, (e) recovery of extracted analytes, and (f) extraction kinetics are some areas which need a greater understanding. This review is concerned with many of these topics as they relate to trace organic analysis wherein SFE is the primary sample preparation technique.     

Comparison of alternative and conventional extraction techniques for the determination of zearalenone in corn

Naturally contaminated corn samples of different origin were extracted using two conventional techniques (blending and shaking) and three alternative approaches (ultrasonic extraction, accelerated solvent extraction, and microwave-assisted extraction). Use of the same extraction mixture for all trials enabled the efficiency of the various extraction techniques to be compared. Extracts were filtered and directly analyzed by LC–ESI–MS, without further clean-up. The yield from the alternative extraction techniques showed efficiency to be higher than for conventional techniques. In particular, microwave-assisted extraction was slightly superior to other techniques.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

Effect of Ultrasound-Assisted,Microwave-Assisted and Ultrasound-Microwave-Assisted Extraction on Pectin Extraction from Industrial Tomato Waste

This work aimed to study the effect of ultrasound-assisted (UAE), microwave-assisted (MAE), and ultrasound-microwave-assisted (UMAE) methods for pectin extraction from industrial tomato waste. The overall performance index from the fuzzy analytical method with three criteria, pectin yield, galacturonic acid, and lycopene content, was applied to evaluate the best extraction conditions by using the weight of 75, 20, and 5, respectively. The UAE conditions was performed at a temperature of 80 °C for 20 min with the variations in the extraction pH and the solid liquid (SL) ratio. The best UAE conditions with high pectin yield, and high total carboxyl group, as well as a lycopene content, was the pH of 1.5 and the SL ratio of 1:30. The MAE conditions was performed with variations in the microwave powers and times. The results showed that the best MAE conditions were 300 W for 10 min, which gave high pectin yield with high galacturonic acid and lycopene content. Various conditions of UMAE at the best conditions of MAE and UAE were performed and exhibited that the UAE had more positively affected the pectin yield. However, the FTIR spectra of obtained pectins from different extraction techniques showed a similar pectin structure.