Synthesis of bovine serum albumin imprinted Mn:ZnS quantum dots

A novel bovine serum albumin（BSA） imprinted Mn-doped ZnS quantum dots（Mn:ZnS QDs） is firstly reported.The molecular imprinted polymer（MIP） functionalized Mn:ZnS QDs（Mn:ZnS@SiO₂@MIP） include the preparation of Mn:ZnS QDs,the coating of silica on the surface of Mn:ZnS QDs,and the functional polymerization by sol-gel reaction using 3-aminophenylboronic acid as the functional and cross-linking monomer in the presence of BSA（Mn:ZnS@SiO₂@MIP-BSA）,and then the elution of the imprinted BSA on the surface of Mn:ZnS@SiO₂ QDs.The results showed that the phosphorescence of Mn:ZnS@SiO₂@MIP is stronger quenched by BSA than that of non-imprinted one（Mn:ZnS@SiO₂@NIP）,indicating that the selectivity of the imprinted Mn:ZnS quantum dots toward BSA is superior to that of non-imprinted one.     

Surface plasmon resonance sensor chips for the recognition of bovine serum albumin via electropolymerized molecularly imprinted polymers

In this paper,a surface plasmon resonance(SPR)sensor chip for detection of bovine serum album(BSA)was prepared by electropolymerization of 3-aminophenylboronic acid(3-APBA)based on molecularly imprinted polymer(MIP)technique.The surface morphology of MIP and non-imprinted(NIP)flms were characterized by scanning electroscopy(SEM).SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates.The effects of pH,ion strength of rebinding BSA,the specific binding and selective recognition were studied for MIP films.Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein(0.02–0.8 mg/mL)in0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection(LOD)of 0.02 mg/mL.     

Protein‐Directed Synthesis of Mn‐Doped ZnS Quantum Dots: A Dual‐Channel Biosensor for Two Proteins

Proteins typically have nanoscale dimensions and multiple binding sites with inorganic ions, which facilitates the templated synthesis of nanoparticles to yield nanoparticle–protein hybrids with tailored functionality, water solubility, and tunable frameworks with well‐defined structure. In this work, we report a protein‐templated synthesis of Mn‐doped ZnS quantum dots (QDs) by exploring bovine serum albumin (BSA) as the template. The obtained Mn‐doped ZnS QDs give phosphorescence emission centered at 590 nm, with a decay time of about 1.9 ms. A dual‐channel sensing system for two different proteins was developed through integration of the optical responses (phosphorescence emission and resonant light scattering (RLS)) of Mn‐doped ZnS QDs and recognition of them by surface BSA phosphorescent sensing of trypsin and RLS sensing of lysozyme. Trypsin can digest BSA and remove BSA from the surface of Mn‐doped ZnS QDs, thus quenching the phosphorescence of QDs, whereas lysozyme can assemble with BSA to lead to aggregation of QDs and enhanced RLS intensity. The detection limits for trypsin and lysozyme were 40 and 3 nM , respectively. The selectivity of the respective channel for trypsin and lysozyme was evaluated with a series of other proteins. Unlike other protein sensors based on nanobioconjugates, the proposed dual‐channel sensor employs only one type of QDs but can detect two different proteins. Further, we found the RLS of QDs can also be useful for studying the BSA–lysozyme binding stoichiometry, which has not been reported in the literature. These successful biosensor applications clearly demonstrate that BSA not only serves as a template for growth of Mn‐doped ZnS QDs, but also impacts the QDs for selective recognition of analyte proteins.     

Preparation and characterization of protein molecularly imprinted polysiloxane using mesoporous calcium silicate as matrix by sol–gel technology

Calcium silicate particles containing mesoporous SiO₂ on the surface (CaSiO₃@SiO₂) were prepared by acid modification of calcium silicate with diluted hydrochloric acid. Bovine serum albumin (BSA) molecularly imprinted polysiloxane (MIP) was synthesized using silane as the functional monomer, BSA as the template and CaSiO₃@SiO₂ particles as the matrix in an aqueous phase. SEM, granulometry, FT-IR and BET analysis were used to characterize the protein MIP. Influence factors on the rebinding capacity of the MIP were investigated, such as the pH in treating CaSiO₃, eluent type and silane proportion. The mass of BSA loading and rebinding on CaSiO₃@SiO₂ and MIP was investigated. The adsorption and recognition properties of the MIP were evaluated and the results showed that the MIP exhibited an obvious improvement in terms of rebinding capacity for BSA as compared with non-imprinted polysiloxane (NIP). BSA imprinted polysiloxane could recognize the template protein by using Lys, Ova, Hb, and Glo as control proteins, and the selectivity factor (β) was above 2.3. The rebinding capacity of BSA imprinted polysiloxane for BSA reached 81.31 mg/g, which was 2.25 times of NIP.     

Fluorescent turn-on detection of cysteine using a molecularly imprinted polyacrylate linked to allylthiol-capped CdTe quantum dots

CdTe quantum dots capped with thioglycolic acid (TGA) display a strong turn-on fluorescence response if exposed to solutions of cysteine (Cys). In order to exploit this effect, a molecularly imprinted polymer (MIP) for Cys was covalently linked to the QDs via allyl mercaptan. The resulting nanomaterials (QDs, MIP-coated QDs, and nonimprint-coated QDs) were characterized by FTIR and scanning electron microscopy. The adsorption of Cys was studied in phosphate buffer (pH 7.4) with respect to equilibration times (5, 15, and 40 min, respectively), binding constants [2.98, 2.42, and 0.96 (×10⁴ M^?1)], and Langmuir isotherms (R²?=?0.9995, 0.9999, and 0.9983) in the Cys concentration range between 3.33 μM to 500 μM. The method has a detection limit of 0.85 μM (3σ, blank, for n?=?10). The selectivity of the MIP-coated QDs for Cys over 19 other amino acids is similar to that of bare QDs, but MIP-QDs afford better recoveries of Cys from solutions also containing bovine serum albumin (90 %) and fetal bovine serum (97 %), respectively, when compared to the recoveries that are obtained with bare (non-imprinted) QDs (135 % and 120 %). This is probably due to the fact that the outer MIP shell largely reduces protein wrapping, dot aggregation, and matrix inclusion.

光谱法研究核壳量子点CdTe/CdS与牛血清白蛋白的相互作用

应用荧光光谱、圆二色光谱和紫外吸收光谱等技术研究核壳量子点CdTe/CdS与牛血清白蛋白(BSA)相互作用的结果表明,CdTe/CdS对BSA的荧光猝灭机理为静态猝灭。根据不同温度下量子点对BSA的荧光猝灭作用计算了结合常数、热力学参数,证明了量子点与BSA相互作用力主要是范德华力或氢键作用力。探讨了量子点对BSA构象的影响。     

BSA‐imprinted synthetic receptor for reversible template recognition

A novel approach to the manufacturing of protein‐responsive imprints on a home‐made chitosan substrate was established together with m‐aminophenylboronic acid (APBA) as a functional monomer. The produced polymers were characterized using both (1) equilibrium adsorption assays and (2) high performance liquid chromatography analysis. Results confirmed that the synthesized BSA‐MIP (molecularly imprinted polymer) has a high affinity towards its template compared to the determined control proteins. The produced BSA‐MIP featured largely in its good adsorption reversibility, especially in competitive binding assays, which is of great biological significance in separations. Non‐specific binding was reduced to almost zero in a BSA/BHb competitive binding event. An excellent HPLC profile of template recognition was found for BSA‐MIP, even under harsh mobile phase conditions. In the present work, the adopted trapped‐template‐release method permits recovery of bound BSA [1]. The strategy of making an artificial protein‐receptor with high adsorption affinity and reversibility is promising in on‐line isolation of target protein from complicated biological environments.     

CdTe/CdS核壳量子点与蛋白质荧光标记

利用连续离子层吸附技术合成了水溶性的CdTe／CdS核壳量子点．通过CdS壳层的包覆,量子点的量子效率由原来的15％（裸核）提高到38％（核壳）,这种核壳结构量子点的化学和光学性质具有更好的稳定性,可以用于生物标记．本文采取共价连接与静电吸附两种方法,实现了量子点的生物标记,电泳技术已证明,应用这种量子点成功地实现了对蛋白质分子的生物标记．通过对量子点与蛋白质偶联前后的荧光光谱分析,发现量子点与蛋白质作用后荧光增强是由于蛋白质对量子点进行了表面修饰,从而降低了表面缺陷引起的非辐射跃迁几率所致．通过共价连接量子点的荧光峰位红移,主要是由于偶极-偶极相互作用引起的;量子点与蛋白质静电吸附作用引起的荧光峰位蓝移主要起因于量子点表面电荷量的降低．     

Kinetic study for adsorption of α-naphtholphthalein onto silica gel surface-imprinted polymer and non-imprinted polymer

In this study, the molecular imprinting polymer (MIP) was prepared using α-naphtholphthalein as a template, 2-(diethylamino)ethyl acrylate as a functional monomer and ethylene glycol dimethacrylate as a crosslinking agent by aid of free radical polymerization onto surfaces of vinyltrimethoxysilane modified silica gel. The MIP was extracted with acetonitrile for overnight to remove the template molecule from the MIP. Non-imprinted polymer (NIMP) was synthesized using the same materials except α-naphtholphthalein as template molecule. α-Naphtholphthalein adsorption on surfaces of the both polymer was studied at three different temperatures (19°C, 25°C and 35°C). It was observed that the adsorption capacity increased with increasing temperature and with time. The time required to reach the equilibrium for two polymers and all temperature was accepted to be nearly 6 h. The saturated adsorption amounts at the equilibrium were found as 120 mg/g, 123 mg/g and 127 mg/g at 19°C, 25°C and 35°C, respectively, for MIP, and 78 mg/g, 98 mg/g and 120 mg/g at 19°C, 25°C and 35°C, respectively, for NIMP. The mechanism of adsorption of α-naphtholphthalein onto MIP and NIMP is nearly appropriate to pseudo-first-order kinetic model with an activation energy of 11.63 kJ/mol for MIP, and 23.69 kJ/mol for NIMP. Thermodynamic parameters of activated complex in the adsorption process showed that the adsorption was carried out with an endothermic activation enthalpy, large negative entropy changes and the positive values of ΔG* that the adsorption processes is not favorable.     

Bovine serum albumin-directed synthesis of biocompatible CdSe quantum dots and bacteria labeling

A simple method was developed for preparing CdSe quantum dots (QDs) using a common protein (bovine serum albumin (BSA)) to sequester QD precursors (Cd(2+)) in situ. Fluorescence (FL) and absorption spectra showed that the chelating time between BSA and Cd(2+), the molar ratio of BSA/Cd(2+), temperature, and pH are the crucial factors for the quality of QDs. The average QD particle size was estimated to be about 5 nm, determined by high-resolution transmission electron microscopy. With FL spectra, Fourier transform infrared spectra, and thermogravimetric analysis, an interesting mechanism was discussed for the formation of the BSA-CdSe QDs. The results indicate that there might be conjugated bonds between CdSe QDs and -OH, -NH, and -SH groups in BSA. In addition, fluorescence imaging suggests that the QDs we designed can successfully label Escherichia coli cells, which gives us a great opportunity to develop biocompatible tools to label bacteria cells.     

Study on the interaction of CdTe quantum dots with coumaric acid and caffeic acid based on fluorescence reversible tune

This paper describes the synthesis of CdTe quantum dots (QDs) together capped by glutathione and thioglycolic acid (GSH and TGA) in aqueous solution. The narrow photoluminescence (fwhm ≤ 40 nm) CdTe QDs, whose emission spans most of the visible spectrum from green through red, has a quantum yield (QY) of 68% at room temperature. GSH/TGA-CdTe QDs are characterized by various experimental techniques such as optical absorption, photoluminescence and AFM measurements. Coumaric acid and caffeic acid is able to quench the fluorescence of GSH/TGA-CdTe QDs, and the fluorescence intensity is linearly proportional to the concentration of quenchers. The addition of bovine serum albumin (BSA) restores the fluorescence intensity of GSH/TGA-CdTe QDs-coumaric acid system and GSH/TGA-CdTe QDs-caffeic acid system. The fluorescence recovery was due to the interaction of BSA with coumaric acid and caffeic acid, leading to the freeing of the GSH/TGA-CdTe QDs. The fluorescence quenching mechanism of GSH/TGA-CdTe QDs was discussed. The binding constant and thermodynamics parameters of BSA-coumaric acid and BSA-caffeic acid during the binding process were calculated in the paper.     

配体对CdTe量子点与BSA的选择性相互作用的影响

以巯基乙酸(TGA)、巯基丙酸(MPA)、巯基甘油(TG)、L-半胱氨酸(L-cys)和谷胱甘肽(GSH)等5种巯基分子为稳定剂, 水相合成了5种CdTe量子点. 以牛血清白蛋白(BSA)作为靶分子, 通过吸收光谱、荧光光谱和时间分辨荧光动力学等手段研究了各种配体分子稳定的CdTe量子点与BSA的直接相互作用. 结果表明, 5种量子点均能有效猝灭BSA的荧光, 其猝灭程度按配体次序为GSH>L-cys>TGA>TG>MPA; 而BSA对不同配体稳定的CdTe量子点的荧光光谱的影响则具有明显的选择性. BSA对TGA-CdTe和MPA-CdTe量子点的荧光先敏化增强而后猝灭下降; L-cys分子由于同时具有氨基和羧基而与BSA的相互作用较强, 因此BSA能显著猝灭L-cys-CdTe量子点的荧光; 而BSA对TG-CdTe量子点的荧光猝灭程度较小; GSH分子的空间效应使GSH-CdTe量子点的荧光被BSA猝灭的程度最小. 吸收光谱和时间分辨荧光动力学研究表明, 5种量子点与BSA之间的相互作用均为静态过程. 探讨了量子点的配体分子结构与蛋白质的相互作用机理.     

3-氨基苯硼酸为功能单体在壳聚糖上印迹牛血清白蛋白的研究

以壳聚糖为载体, 3-氨基苯硼酸为功能单体对牛血清白蛋白进行了分子印迹的研究, 并对吸附过程进行Langmuir等温吸附模型的数据处理. 结果表明, 印迹聚合物上形成了对于模板分子有较高的吸附容量和选择性的识别位点, Langmuir等温吸附平衡常数为49.5 mL/mg, 结合位点的最大表观结合量为16.3 mg/g, 证明了该印迹聚合物对于牛血红蛋白和溶菌酶这些非模板蛋白的吸附不具有选择性.     

Using capillary electrophoresis mobility shift assay to study the interaction of CdTe quantum dots with bovine serum albumin

In this work, the capillary electrophoresis mobility shift assay （CEMSA） was first adopted to study the interaction of protein with quantum dots （QDs）. In this study, bovine serum albumin （BSA） and CdTe QDs were used as model samples. We observed that BSA was facilely adsorbed to CdTe QDs surface, and the QD-BSA complex was formed by a 1：1 stoichiometric ratio. A value of 2.17 4-0.27 × 10^6 mol^-1 L^-1 （at 25 ℃） for the association constant was obtained by CEMSA.     

没食子酸磁性表面分子印迹聚合物的制备与选择性识别性能

羟基苯甲酸类化合物用途广泛,极性较强,在复杂水溶液体系中这些类似物的分离纯化与分析非常困难。 本文以磁性Fe₃O₄纳米颗粒为载体,没食子酸(GA)为模板分子,制备了磁性表面分子印迹聚合物(MIP)。 利用透射电子显微镜、红外光谱、磁强测定等检测手段对MIP进行了结构表征。 并对其吸附性能进行研究,比较了该MIP对GA及其它3种结构类似物的吸附性能差异。 结果表明,制备的以GA为模板的磁性分子印迹聚合物为核壳球形结构,键合牢固,对GA的吸附动力学符合准二级动力学方程模型,吸附过程属于Langmuir单分子层吸附。 该聚合物对GA表现出优异的选择性识别能力,其吸附量(318 K时37.736 mg/g)远远高于结构类似物。 该磁性分子印迹聚合物对模板分子不仅具有特异识别能力,而且能够磁控分离,分离效率高,可用于固相萃取。     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

Recognition of Staphylococcus enterotoxin via molecularly imprinted beads

The synthesis of molecularly imprinted beads for the recognition of the protein Staphylococcus enterotoxin B (SEB) is described. Two kinds of organic silane (3-aminopropyltrimethoxysilane (APTMS) and octyltrimethoxysilane (OTMS)) were polymerized on the surface of polystyrene microspheres after the SEB template was covalently immobilized by forming imine bonds. The resulting imprinted beads were selective for SEB. The Langmuir adsorption models were applied to describe the equilibrium isotherms. The results showed that an equal class of adsorption was formed in the molecularly imprinted polymer (MIP) with the maximum adsorption capacity of 3.86 mg SEB/g imprinted beads. The MIP has much higher adsorption capacity for SEB than the nonimprinted polymer, and the MIP beads have a higher selectivity for the template molecule.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

Biomolecule-quantum dot systems for bioconjugation applications

In the present work, it is reported for the first time the bioconjugation of CdS quantum dots (QDs) directly with bovine serum albumin (BSA) using a one-step procedure via aqueous route at room temperature by methods of colloidal chemistry. Essentially, the bioconjugates were developed based on BSA as capping ligand for the nucleation and stabilization of CdS nanoparticles using cadmium perchlorate and thioacetamide as precursors. UV-visible spectroscopy was used to characterize the kinetics and the relative stability of CdS nanoparticles. The CdS nanocrystals were produced with the calculated average particle size below 4.0 nm, indicating they were in the so-called "quantum-size confinement range". The results have clearly indicated that BSA was effective on nucleating and stabilizing the colloidal CdS quantum dots.     

Controlled synthesis of ZnS quantum dots and ZnS quantum flakes with graphene as a template

Novel ZnS quantum dots (QDs) and ZnS quantum flakes (QFs) were successfully prepared with graphene nanosheets (GNs) as a special template, and two unique heterostructures of ZnS/GNs were also obtained. Due to the structure-directing template effect of GNs, the as-synthesized ZnS with different morphologies, dots or flakes, were uniformly distributed on the surface of GNs by controlling nucleation and growth. The two different heterostructures of ZnS/GNs exhibited obvious photovoltaic response, and ZnS/GN QFs-on-sheet heterostructures show higher photovoltage than that of ZnS/GN QDs-on-sheet.