Dielectric study on membrane adsorption and release: Relaxation mechanism and diffusion dynamics

Dielectric monitoring of the adsorption or release process of salicylic acid (SA) by chitosan membrane shows that the dielectric spectra of the chitosan membrane/ SA solution systems change regularly in the adsorption or release process. By analyzing the regularity, a new mechanism for the relaxations is proposed. The concentration polarization layer (CPL) caused by SA adsorption or release is confirmed to be essential for the dielectric relaxations. The changes of the spectra with time are explained by account of the relationship between CPL properties and dielectric strength. Based on this relaxation mechanism, a theoretical method can be established to calculate dynamical parameters of inner structure of the adsorption or release systems from their dielectric spectra. Therefore, dielectric spec- troscopy is demonstrated to be a promising method for estimating interfacial distribution of ionic sub- stances and their binding to membrane in a non-invasive way.     

浓差极化的介电模型——复合膜/溶液体系的数值模拟

提出了具有电导率和介电常数线性分布的介质的介电模型, 并导出了其内部电的和结构性质的参数与宏观测量的电容和电导之间定量关系的理论表达式, 以模拟复合膜中的多孔层部分的介电弛豫行为. 大量的模拟计算描述并解释了多孔层介电谱随介电常数分布、厚度等性质而变化的规律. 进一步对具有层状构造的复合膜以及复合膜和溶液相组成的多层体系的弛豫行为进行了数值模拟, 比较了三个体系(多孔层、复合膜、复合膜/液相层状体系)的介电谱, 结果揭示了介电谱对各层性质的依赖关系. 所提出的电导率和介电常数线性分布的多孔层的介电模型, 也可用于具有其他电导率、介电常数分布规律的体系.     

膜/液界面浓度极化现象的介电解析

对由强、弱荷电膜和溶液构成的膜／液非均匀体系，在10－107Hz频率范围进行了介电测量，在直流偏压下，该体系显示了二个显著的介电弛豫．利用具有电导率分布相，即浓度极化相的介电理论对强行电的离子交换膜的结果进行了介电解析，从实验上测得的介电参数求出了反映膜／液界面浓度极化层构造的参数，讨论了该体系产生介电弛像的原因、说明了介电理论的合理性，并提出了膜／液界面体系产生介电弛豫现象的可能机理．     

Physico-chemical study of fouling mechanisms of ultrafiltration membrane on Biwa lake (Japan)

Many studies have been undertaken to understand the fouling of the ultrafiltration membranes in drinking water treatment. Physico-chemical fouling of membranes depends on characteristics of the raw water and membrane surface properties. In the case of Biwa lake, some chemical parameters as Si and Fe concentrations change with temperature (season) causing irreversible fouling. While some exits on the influence of the particle mineralogy on the fouling, little work has been developed to elucidate the relation between the physicochemical complexity of the cake and the fouling. Generally clays or oxides are known to lead to a reversible fouling. In this work, the interactions between a UF organic membrane with minerals leading to a hardly reversible fouling are studied. In the case of the Biwa lake water, fouling of ultrafiltration membranes results from the formation of a Si-rich ferric gel directly deposited on the membrane surface and a secondary allophanic gel layer at a bigger distance. The deposit nature and the membrane/cake interactions were studied using infra-red, X-ray diffraction, Al and Si NMR and EXAFS technics. The effect of mineral particles, especially ferric oxides associated with silica, has been demonstrated. The formation of Fe---Si gel directly on the membrane surface is mainly responsible for the fouling. The change of these particles is less negative than the membrane surface. The structure of such a material is complex. The low permeability of the gel is at the prime origin of the fouling.     

Free-solvent model shows osmotic pressure is the dominant factor in limiting flux during protein ultrafiltration

In protein ultrafiltration (UF), the limiting flux phenomenon has been generally considered a consequence of the presence of membrane fouling or the perceived formation of a cake/gel layer that develops at high operating pressures. Subsequently, numerous theoretical models on gel/cake physics have been made to address how these factors can result in limiting flux. In a paradigm shift, the present article reestablishes the significance of osmotic pressure by examining its contribution to limiting flux in the framework of the recently developed free solvent osmotic pressure model. The resulting free-solvent-based flux model (FSB) uses the Kedem–Katchalsky model, film theory and the free solvent representation for osmotic pressure in its development. Single protein tangential-flow diafiltration experiments (30 kDa MWCO CRC membranes) were also conducted using ovalbumin (OVA, 45 kDa), bovine serum albumin (BSA, 69 kDa), and immuno-gamma globulin (IgG, 155 kDa) in moderate NaCl buffered solutions at pH 4.5, 5.4, 7 and 7.4. The membrane was preconditioned to minimize membrane fouling development during the experimental procedure. The pressure was randomly selected and flux and sieving were determined. The experimental results clearly demonstrated that the limiting flux phenomenon is not dominated by membrane fouling and the FSB model theoretically illustrates that osmotic pressure is the primary factor in limiting flux during UF. The FSB model provides excellent agreement with the experimental results while producing realistic protein wall concentrations. In addition, the pH dependence of the limiting flux is shown to correlate to the pH dependency of the specific protein diffusion coefficient.     

Chemical and physical aspects of organic fouling of forward osmosis membranes

The growing attention to forward osmosis (FO) membrane processes from various disciplines raises the demand for systematic research on FO membrane fouling. This study investigates the role of various physical and chemical interactions, such as intermolecular adhesion forces, calcium binding, initial permeate flux, and membrane orientation, in organic fouling of forward osmosis membranes. Alginate, bovine serum albumin (BSA), and Aldrich humic acid (AHA) were chosen as model organic foulants. Atomic force microscopy (AFM) was used to quantify the intermolecular adhesion forces between the foulant and the clean or fouled membrane in order to better understand the fouling mechanisms. A strong correlation between organic fouling and intermolecular adhesion was observed, indicating that foulant–foulant interaction plays an important role in determining the rate and extent of organic fouling. The fouling data showed that FO fouling is governed by the coupled influence of chemical and hydrodynamic interactions. Calcium binding, permeation drag, and hydrodynamic shear force are the major factors governing the development of a fouling layer on the membrane surface. However, the dominating factors controlling membrane fouling vary from foulant to foulant. With stronger intermolecular adhesion forces, hydrodynamic conditions for favorable foulant deposition leading to cake formation are more readily attained. Before a compact cake layer is formed, the fouling rate is affected by both the intermolecular adhesion forces and hydrodynamic conditions. However, once the cake layer forms, all three foulants have very similar flux decline rates, and further changes in hydrodynamic conditions do not influence fouling behavior.     

Characterization and theoretical analysis of protein fouling of cellulose acetate membrane during constant flux dead-end microfiltration

A rapid characterization method was used to study protein fouling of cellulose acetate membrane during dead-end, in-line, constant flux microfiltration. Based on pressure-permeate volume profiles, two fouling phases could be identified and compared at different permeate fluxes. Using protein staining dyes, the model foulant (bovine serum albumin) was found to deposit on the upstream side of the membrane as a loose cake at its isoelectric point. The effects of solution pH on both the nature and extent of membrane fouling, and membrane cleaning were examined. To further understand and quantitatively analyze the fouling behavior, a combined mathematical model which took into account pore blocking, cake formation and pore constriction was developed based on existing fouling models. The data obtained by modeling was in good agreement with experimental fouling data. Theoretical analysis of data clearly indicated that cake formation was the main fouling mechanism. Using methods such as dynamic light scattering, the significant role of large protein aggregates in membrane fouling was confirmed. The dimer composition of protein did not change significantly during the fouling experiments, clearly indicating that smaller aggregates played less important role in membrane fouling.     

Modelling of submerged membrane bioreactor: Conceptual study about link between activated slugde biokinetics,aeration and fouling process

A mathematical model was developed to simulate filtration process and aeration influence on submerged membrane bioreactor (SMBR) in aerobic conditions. The biological kinetics and the dynamic effect of the sludge attachment and detachment from the membrane, in relation to the filtration and a strong intermittent aeration, were included in the model. The model was established considering soluble microbial products (SMP) formation-degradation. The fouling components responsible of pore clogging, sludge cake growth, and temporal sludge film coverage were considered during calculation of the total membrane fouling resistance. The influence of SMP, transmembrane pressure, and mixed liquor suspended solids on specific filtration resistance of the sludge cake was also included. With this model, the membrane fouling under different SMBR operational conditions can be simulated. The influence of a larger number of very important process variables on fouling development can be well quantified. The model was developed for evaluating the influence on fouling control of an intermittent aeration of bubbles synchronized or not with the filtration cycles, taking into account the effects of shear intensity on sludge cake removal.     

Flux decline during nanofiltration of naturally-occurring dissolved organic matter: effects of osmotic pressure,membrane permeability,and cake formation

Nanofiltration of naturally-occurring dissolved organic matter (NOM) by an aromatic polyamide membrane was measured in a crossflow bench-scale test cell and modeled using a semi-empirical osmotic pressure/cake formation model. Our objective was to examine flux decline due to NOM fouling while explicitly accounting for flux decline due to osmotic effects and changes in membrane permeability. This approach allowed quantification of the effect of ionic composition on specific NOM cake resistance, and yielded insight into flux decline due to enhanced NaCl rejection by the NOM deposit. In the absence of NOM, increasing NaCl concentration reduced salt rejection and decreased membrane permeability. Flux decline was modeled by accounting for changes in osmotic pressure with time, and by employing an effective permeability. The addition of calcium significantly reduced rejection of sodium and feed conductivity, and thus mitigated flux decline. Increasing pH from 4 (near membrane pI) to 10 increased the effective permeability but also increased NaCl rejection, which resulted in greater flux decline. The presence of NOM caused greater flux decline resulting from a combination of NOM cake resistance and increased rejection of NaCl by negatively charged NOM functional groups. Increasing NaCl concentration had little effect on the mass of NOM deposited, but significantly increased the specific resistance of the NOM cake. The effect of ionic strength on specific resistance correlated with a reduction in NOM size, estimated by separate UF permeation experiments and size exclusion chromatography analysis of UF permeate. Therefore, increased specific cake resistance is consistent with a more compact, less porous cake. Flux decline by NOM solutions showed a maximum at pH 7, where salt rejection was also a maximum. Binding of calcium reduced the ability of NOM to enhance NaCl rejection, and likely increased NOM cake resistance. Flux decline caused by NOM fouling in the presence of calcium was only significantly different than that caused by NOM in a solution of NaCl at the same ionic strength when the calcium concentration corresponded to saturation of NOM binding sites.     

A Combined Pore Blockage and Cake Filtration Model for Protein Fouling during Microfiltration

Previous studies of protein fouling during microfiltration have shown significant discrepancies between filtrate flux data and predictions of the classical pore blockage, pore constriction, and cake filtration models. A new mathematical model was developed for the filtrate flux which accounts for initial fouling due to pore blockage and subsequent fouling due to the growth of a protein cake or deposit over these initially blocked regions. The model explicitly accounts for the inhomogeneity in the cake layer thickness over different regions of the membrane arising from the time-dependent blockage of the pore surface. The model was shown to be in excellent agreement with experimental data obtained during the stirred cell filtration of bovine serum albumin solutions through polycarbonate track-etched microfiltration membranes over the entire course of the filtration. The model provides a smooth transition from the pore blockage to cake filtration regimes, eliminating the need to use different mathematical formulations to describe these two phenomena. In addition, the model provides the first quantitative explanation for some of the unusual observations reported previously in investigations of protein microfiltration. The results provide important insights into the underlying mechanisms of protein fouling during microfiltration. Copyright 2000 Academic Press.     

Macroscopic and microscopic characterizations of a cellulosic ultrafiltration (UF) membrane fouled by a humic acid cake deposit: First step for intensification of reverse osmosis (RO) pre-treatments

One of the critical issues for the application of low-pressure membrane processes (microfiltration, MF or ultrafiltration, UF) as pre-treatment processes for freshwater preparation is membrane fouling due to natural organic matter (NOM). The aim of this preliminary study is to contribute to a better understanding of the fouling phenomena occurring on a regenerated cellulose UF membrane fouled with a humic acid cake deposit. The originality of this work is based on a double approach on surface analysis at both macroscopic and microscopic scales. It is presently reported that humic acid fouling is mainly governed by cake formation, which plays a major role in flux decline via the well-known model of resistances in series. We obtained that the adsorbed resistance is 2% of the total resistance while the cake resistance is 52% of the total resistance, which is higher than that of the virgin membrane. From field emission gun scanning electron microscopy (FESEM) it was found for the first time that the humic acid cake is well organized, and particularly in fractal forms. The fractal dimension (FD) of the cake is determined as 2.52, which is in good agreement with the theoretical fractal dimension of particle–cluster aggregation underlying diffusion-limited aggregation (FD = 2.51). This new microscopic fouling index decreases with the presence of cake and can be correlated with the decrease of the hydraulic permeability. The classical silt density index (SDI) and the new modified fouling index (denoted MFI-UF) were obtained and also proved the presence of the cake. To complete this approach transmembrane streaming potential (denoted SP) measurements were conducted with a new homemade apparatus developed in our lab and presented for the first time in the present article, helped us to observe also a penetration of low molecular fractions of humic acid inside the membrane. Indeed the displacement of the isoelectric point (iep) of the membrane from 2.3 to 1.5 for the virgin and fouled membranes, respectively, permitted to illustrate this penetration. This newly designed SP apparatus is a semi-automatic tool assisted by a software denoted as proFluid 1.2. Furthermore, preliminary experiments with seawater were realized in order to estimate the influence of seawater filtration on the hydraulic permeability and SP parameters for the RC 100-kDa membrane.     

基于XDLVO理论解析MBR膜污染研究进展

膜污染问题严重制约了膜生物反应器(MBR)的广泛应用,因此膜污染机制的研究对于有效控制膜污染十分重要。XDLVO理论合理地解析了范德华力、极性作用力、双电层作用力在膜污染过程中的贡献,有效地揭示了膜污染机理。本文首先阐述了XDLVO理论;然后运用XDLVO理论,解析界面微距离范围内膜表面凝胶层及泥饼层形成过程;最后总结了XDLVO理论在MBR膜污染方面的应用,并对该领域未来的研究方向进行了展望。     

A three mechanism model to describe fouling of microfiltration membranes

Mathematical modeling of flux decline during filtration plays an important role in both sizing membrane systems and in the understanding of membrane fouling. Protein fouling is traditionally modeled using one of three classical fouling mechanisms: pore blockage, pore constriction or cake filtration. Here, we have developed a mathematical model to describe flux decline behavior during microfiltration accounting for all three classical fouling mechanisms. Pore constriction was assumed to first reduce the size of internal pores. Pore blockage then occurs at the top of the membrane, preventing further fouling to the interior structure. Finally the foulants at the top of the membrane form a cake, which controls the late stages of the filtration. The model prediction shows excellent agreement with experimental data for 0.25 μm polystyrene microspheres filtered through 0.22 μm Isopore membranes (where pore constriction is expected to be minimal) as well as non-aggregated bovine serum albumin solution through hydrophobic Durapore membranes (where pore constriction is expected to dominate). The effects of different fouling mechanisms on the flux decline were characterized by the ratio of characteristic fouling times of the different mechanisms. In this way the model can provide additional insights into the relative importance of different fouling mechanisms as compared to an analysis by a single mechanism model or by derivative plots, and it can be used to provide important insights into the flux decline characteristics.     

Microfiltration of post-fermentation broth with backflushing membrane cleaning

Separation of microorganism cells from broth is a very important stage in the recovery of fermentation products. The microfiltration of fermented glycerol solutions was studied. During this process, the filter cake building up on the membrane surface caused an increase of filtration resistances, resulting in the decrease of the permeate flux. In this work, short time reverse flow of permeate was used to remove the fouling layer after each cycle of the filtration. The applied periodical membrane cleaning led to minimization of the observed fouling effects.     

Direct-flow microfiltration of aquasols: II. On the role of colloidal natural organic matter

Natural organic matter (NOM) has been considered a major contributor to the fouling of microfiltration (MF) and ultrafiltration (UF) membranes employed in water treatment. However, the fouling potential of NOM has often been assessed in terms of its size or chemical composition. The colloid’s chemical properties have often been ignored. In this study, a chemical attachment-based (CAB) model established previously was used in conjunction with a variety of analytical techniques to investigate the existence of three major components of an aquatic NOM and their role in the fouling of a polyvinylidene fluoride MF membrane. The results suggest that colloidal NOM relevant to membrane fouling has a broader size distribution and variations in chemical properties than proposed previously. For the model aquatic NOM used in this research, fouling was primarily contributed by both non-humic and humic colloidal fractions. The non-humic colloids were larger in size and probably adhered to the membrane regardless of the solution chemistry, while humic colloids had variable size and stickiness depending on solution chemistry. The fouling caused by organic colloids was mostly hydraulically irreversible, as a consequence of favorable surface interactions. The CAB model provided a useful way to understand the role of organic colloids in membrane fouling.     

Removal of natural organic matter by ultrafiltration with TiO2-coated membrane under UV irradiation

This study investigates the performance of ultrafiltration (UF) by membranes coated with titanium dioxide (TiO2) photocatalyst under ultraviolet (UV) illumination in removing natural organic matter (NOM) and possibly in reducing membrane fouling. Experiments were carried out using heat-resistant ceramic disc UF membranes and humic acids as model substances representing naturally occurring organic matter. Membrane sizes of 1, 15, and 50 kDa were used to examine the effects of coating under ultraviolet irradiation. A commercial humic solution was subjected to UF fractionation (batch process); gel filtration chromatography was applied to study the effects of molecular weight distribution of NOM on UF membrane fouling. When compared to naked membranes, UV254 (ultraviolet light of lambda=254 nm) illumination of TiO2-coated membranes exhibits more flux decline with similar effluent quality. Although the UF membrane is able to remove a significant amount of humic materials, the incorporated photocatalysis results in poor performance in terms of permeate flux. The TiO2-coated membrane under UV254 irradiation alters the molecular weight (MW) distribution of humic materials, reducing them to <1 kDa, which is smaller than the smallest (1-kDa) membrane in this study. Thus, TiO2-coated membranes under UV254 irradiation do not perform any better in removing natural organic matter and reducing membrane fouling.     

Electrical impedance spectroscopy characterisation of conducting membranes: II. Experimental

An electrical impedance spectroscopy (EIS) method and apparatus that eliminates the need for electrodes in the feed and permeate solutions was evaluated as a means of characterising physical and performance properties of polysulphone ultrafiltration membranes in situ. The membranes were sputter-coated on one side with platinum before assembly in the apparatus. Alternating electrical current used for impedance measurements was injected directly into the coat via dry electrical contacts with the edges of the membrane. As the frequency of the EIS measurement was increased the current increasingly dispersed into the solution via the interfacial region (double layer) and/or fouling layers that the coat formed with the solution. These spatial dispersions manifested as characteristic dispersions with frequency of the impedance of the system. Water flux measurements, field emission scanning electron microscopy and atomic force microscopy were also used to quantify the important membrane performance parameters of porosity and surface roughness. These estimates were in good agreement with the impedance model for the in situ membrane system that was fitted to the measured impedance dispersions. The study shows that EIS measurements potentially can quantify membrane performance parameters in situ better than those techniques that require disruption of the membrane separation process. The method also has the potential for monitoring the deposition of particulate that can lead to fouling.     

聚吡咯微粒掺入的聚苯乙烯膜在电解质溶液中的介电弛豫谱及其解析

在40 Hz～11 MHz频率范围测量了聚苯乙烯膜以及混入聚吡咯粒子的聚苯乙烯膜和电解质溶液构成的体系的介电谱, 发现了特异的弛豫现象: 纯的和掺入导电性聚吡咯后的聚苯乙烯膜分别显示出单一弛豫和双弛豫的不同模式的介电谱. 在Maxwell-Wagner界面极化概念基础上解释了该弛豫机制: 高、低频弛豫分别由膜-液界面极化和膜相本身的不均一性引起的. 将体系进行了模型化, 并利用Hanai理论方法对谱进行了解析, 获得了内部电性质的诸多参数. 对不同聚吡咯掺入量的膜/溶液体系的介电测量和解析结果表明, 电解质溶液的种类、浓度以及膜中混入聚吡咯的量都影响着膜相的介电响应. 这些结论为利用加入导电粒子改善绝缘高分子聚合物的电性质的研究以及制备既具有导电功能又使基体的力学性能得到提高的高分子复合物提供了重要的线索.     

Experimental study of ultrafiltration membrane fouling by sodium alginate and flux recovery by backwashing

Membrane fouling is the major limitation for a broader application of membrane technology. One of the main causes of membrane fouling in advanced wastewater reclamation and in membrane bioreactors (MBR) are the extracellular polymeric substances (EPS). Among the main constituents in EPS, polysaccharides are the most ubiquitous. This study aims at a better understanding of the fouling mechanisms of EPS and the efficiency of backwashing technique, which is applied in practice to restore membrane flux. For that purpose, the evolution of fouling by sodium alginate, a microbial polysaccharide, is studied in ultrafiltration. Fouling experiments are carried out in a single fiber apparatus, aiming at identifying the significance of distinct fouling mechanisms and their degree of reversibility by backwashing. An important parameter considered in the study is the concentration of calcium ions, which promote sodium alginate aggregation and influence the rate of flux decline, the reversibility of fouling and rejection. A rapid irreversible fouling takes place due to internal pore constriction, at the beginning of filtration, followed by cake development on the membrane surface. With increased calcium addition, cake development becomes the dominant mechanism throughout the filtration step. Furthermore, fouling reversibility is increased with the increase of calcium concentration. A unique behavior of sodium alginate solution in the absence of calcium is also noted, i.e. the formation of a labile layer on the membrane surface, which is affected by the small cross-flow that exists inside hollow fibers, even in the nominally dead-end mode of operation.     

A review on hollow fiber membrane module towards high separation efficiency: Process modeling in fouling perspective

Hollow fiber microfiltration (MF) and ultrafiltration (UF) membrane processes have been extensively used in water purification and biotechnology. However, complicated filtration hydrodynamics wield a negative influence on fouling mitigation and stability of hollow fiber MF/UF membrane processes. Thus, establishing a mathematical model to understand the membrane processes is essential to guide the optimization of module configurations and to alleviate membrane fouling. Here, we present a comprehensive overview of the hollow fiber MF/UF membrane filtration models developed from different theories. The existing models primarily focus on membrane fouling but rarely on the interactions between the membrane fouling and local filtration hydrodynamics. Therefore, more simplified conceptual models and integrated reduced models need to be built to represent the real filtration behaviors of hollow fiber membranes. Future analyses considering practical requirements including complicated local hydrodynamics and nonuniform membrane properties are suggested to meet the accurate prediction of membrane filtration performance in practical application. This review will inspire the development of high-efficiency hollow fiber membrane modules.