Preparation and photocatalytic activity of ZnO/TiO2/SnO2 mixture

ZnO/TiO₂/SnO₂ mixture was prepared by mixing its component solid oxides ZnO, TiO₂ and SnO₂ in the molar ratio of 4?1?1, followed by calcining the solid mixture at 200-1300 °C. The products and solid-state reaction process during the calcinations were characterized with powder X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and Brunauer-Emmett-Teller measurement of specific surface area. Neither solid-state reaction nor change of crystal phase composition took place among the ZnO, TiO₂ and SnO₂ powders on the calcinations up to 600 °C. However, formation of the inverse spinel Zn₂TiO₄ and Zn₂SnO₄ was detected at 700-900 and 1100-1200 °C, respectively. Further increase of the calcination temperature enabled the mixture to form a single-phase solid solution Zn₂Ti_0.5Sn_0.5O₄ with an inverse spinel structure in the space group of . The ZnO/TiO₂/SnO₂ mixture was photocatalytically active for the degradation of methyl orange in water; its photocatalytic mass activity was 16.4 times that of SnO₂, 2.0 times that of TiO₂, and 0.92 times that of ZnO after calcination at 500 °C for 2 h. But, the mass activity of the mixture decreased with increasing the calcination temperature at above 700 °C because of the formation of the photoinactive Zn₂TiO₄, Zn₂SnO₄ and Zn₂Ti_0.5Sn_0.5O₄. The sample became completely inert for the photocatalysis after prolonged calcination at 1300 °C (42 h), since all of the active component oxides were reacted to form the solid solution Zn₂Ti_0.5Sn_0.5O₄ with no photocatalytic activity.     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜(SEM)、X射线衍射(XRD)、光致发光光谱(PL)和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比nZn2+/nOH-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱(UV-Vis)并结合低温氮吸附-脱附比表面测试(BET),研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜（SEM）、Ｘ射线衍射（XRD）、光致发光光谱（PL）和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比n_Zn²⁺/n_OH^-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱（UV-Vis）并结合低温氮吸附-脱附比表面测试（BET）,研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

花状CeO2/TiO2异质结的构筑及光催化性能

采用溶剂热法制备了三维花状CeO₂/TiO₂异质结光催化剂,然后以甲基橙(MO)为模拟有机污染物,在氙灯照射下考察了其光催化活性。结果表明,花状结构由纳米片和纳米颗粒复合而成,纳米片上均匀地附着CeO₂颗粒。Ce/Ti的物质的量之比(n_Ce/n_Ti)和溶剂热时间影响异质结的光催化性能,当n_Ce/n_Ti=0.1、溶剂热时间为6 h时,CeO₂/TiO₂的光催化活性达到最佳,氙灯照射50 min的降解率达95%,光催化活性优于纯TiO₂,这主要是CeO₂和TiO₂形成了异质结,有利于光生电子和空穴的分离。     

Effects of Calcination on the Physical and Photocatalytic Properties of TiO<Subscript>2</Subscript> Powders Prepared by Sol–Gel Template Method

TiO₂ powders were prepared by sol–gel template method and calcined under different conditions. XRD, BET and TEM were used to characterize the TiO₂ powders obtained. The photocatalytic activity of TiO₂ was investigated by the degradation of methyl orange. It was found that TiO₂ powder has the highest photocatalytic activity at a calcination temperature of 673 K. The effects of physical properties such as surface area, crystallinity and crystal phase on the photocatalytic activity of TiO₂ were discussed.     

Fabrication and characterization of TiO2 photocatalytic thin film prepared from peroxo titanic acid sol

A novel sol–gel technique using the PTA (peroxo titanic acid) sol as precursor for the fabrication of TiO₂ photocatalytic thin film is introduced in this paper. The peroxo titanic acid sol was synthesized from titanyl sulfate (TiOSO₄), ammonia and peroxide solution (H₂O₂). The transparent and porous TiO₂ thin film was prepared via a sol–gel technique using PTA sol and polyethylene glycol (PEG) as precursor and template, respectively. The TiO₂ thin film samples were characterized by the X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectrophotometry (UV–vis), X-ray photoelectron spectrum (XPS) and thermogravimetry and differential thermal analysis (TG-DTA) technique. The PTA sol displayed amorphous TiO₂ below 100 °C. The anatase phase formed at 200 °C to 700 °C. The crystallinity of anatase phase was improved with increasing temperature. The anatase crystals on the surface of TiO₂ film were strip-like, the size being about 100 nm in length and 40 nm in diameter. Addition of PEG to the PTA sol developed porous structures in the film and changed the size and shape of the particles. The surface of the film contained Ti, O and C elements and Na element that diffused into the film from the glass substrate. The photocatalytic performance of TiO₂ film was tested for the degradation of 10 mg/L methyl orange. The degradation of methyl orange solution reached 98.9% after irradiated for 180 min under UV light. The porous TiO₂ thin film exhibited high photocatalytic activity towards degrading methyl orange.     

具有高可见光催化活性的Ti3+和碳共掺杂改性的TiO2光催化剂

以乙醇为碳源,采用操作简单的真空活化法一步实现对TiO₂的Ti³⁺与C的共掺杂改性,TiO₂用X衍线衍射、紫外-可见光谱、顺磁共振、X射线光电子能谱和红外光谱等手段表征了催化剂的结构、组成、光学性质. 结果表明, 经Ti³⁺与C共掺杂改性后的催化剂表现出高的可见光降解甲基橙活性. 复合在催化剂表面的石墨可以增强催化剂对可见光的响应范围,而Ti³⁺与氧缺陷形成的掺杂能级则可以提高光生电子的迁移效率. 实验表明,两者之间的协同作用促进了其可见光催化活性的提高.     

Synthesis of Nano‐Sized Zinc Oxide Photocatalyst by Combustion Method

The objective of this research was to use combustion synthesis to create a nano‐sized ZnO photocatalyst using citric acid as the fuel and zinc nitrate as the oxidant. The starting materials were mixed in a stoichiometric ratio, and a slurry precursor with high homogeneity was formed. The precursor was ignited at room temperature, resulting in dry, loose, and voluminous ZnO powders. The powders, characterized by SEM, TEM and XRD, showed a particle size range of 40 to 80 nm with a wurtzite structure. The ZnO powders were introduced as a photocatalyst for the degradation of methyl orange, which was adopted as a model compound. UV light (6W) was used as the irradiation source to induce synthesized ZnO powders to perform catalytic activity. The photocatalytic reaction was executed in 40 mL of a 10 ppm methyl orange aqueous solution under 254 nm UV illumination. In this work, it was observed that both UV light and ZnO powders are needed for the photocatalytic reaction. In addition, it was found that increasing the amount of ZnO powder present in the MO (methyl orange‐C₁₄H₁₄N₃NaO₃S) solution did not correlate directly with an increase in photocatalytic ability. It was found that the scattering problem of UV light also needs to be considered. The optimized photocatalytic degradation ratio in this work reached 92.7%.     

Synthesis of Mixed-Phase TiO<Subscript>2</Subscript> Nanopowders Using Atmospheric Pressure Plasma Jet Driven by Dual-Frequency Power Sources

Mixed-phase TiO₂ nanopowders with different ratios of anatase and rutile have been successfully synthesized using atmospheric pressure plasma jet driven by dual-frequency power sources. The crystal structures of the TiO₂ nanopowders were characterized by X-ray diffraction, SAED, HRTEM, and Raman shift spectroscopy. These results indicated that samples possessed anatase and rutile structure, in addition, the crystallinity of the TiO₂ nanopowders increased and the chlorine contamination decreased with discharge RF power increasing. The photocatalytic activity of the TiO₂ nanopowders was evaluated by decomposition methylene blue solution. The TiO₂ nanopowders which were produced at the discharge RF power of 110 W had the highest photocatalytic activity. Optical emission spectroscopy (OES) was used to detect various excited species in the plasma jet. The results indicate that the various RF power significantly changes the intensities of emission lines (Ar, Ar⁺, Ti, Ti⁺, Ti²⁺, Ti³⁺ and O), which results in the TiO₂ nanopowders a mixture of anatase and rutile phases. The nonequilibrium chemical composition could be formed in one step without anneal. It may have potential applications for synthesizing nanosized particles of high crystallinity by reactive nonthermal plasma processing.     

Parameters controlling the photocatalytic performance of ZnO/Hombikat TiO2 composites

Commercial TiO₂ (Hombikat, UV-100) was impregnated with different loadings of zinc nitrate solution and subsequently calcined at different temperatures in order to obtain a stable homogeneous solid composite of ZnO/TiO₂. The prepared samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM), UV-vis and Raman spectroscopy, inductively coupled plasma mass spectroscopy (ICP), X-ray photoelectron spectroscopy (XPS) as well as N₂ adsorption and desorption measurements. Results show that ZnO was incorporated within the TiO₂ crystals and did not form a separate bulky phase or metallic zinc. Moreover, the calcination temperature dramatically modifies the texture properties of the prepared samples compared with original Hombikat TiO₂. The photocatalytic performance of the prepared samples was evaluated by monitoring the degradation of methyl orange dye under black light illumination. Three main parameters were studied; ZnO loading, surface area and initial pH of the methyl orange solution. The variation in ZnO loading appears to have less influence on the catalytic activity than either the surface area or the pH.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with nitrogen and cerium

Nitrogen and cerium codoped TiO₂ photocatalysts were prepared by a modified sol-gel process with doping precursors of cerium nitrate and urea, and characterized by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray photoelectron spectra (XPS) and ultraviolet-visible light diffuse reflectance spectra (UV-vis DRS). Results indicate that anatase TiO₂ is the dominant crystalline type in as-prepared samples, and CeO₂ crystallites appear as the doping ratio of Ce/Ti reaches to 3.0 at%. The TiO₂ starts to transform from amorphous phase to anatase at 987.1 K during calcination, according to the TG-DSC curves. The XPS show that three major metal ions of Ce³⁺, Ce⁴⁺, Ti⁴⁺ and one minor metal ion of Ti³⁺ coexist on the surface. The codoped TiO₂ exhibits significant absorption within the range of 400-500 nm compared to the non-doped and only nitrogen-doped TiO₂. The enhanced photocatalytic activity of the codoped TiO₂ is demonstrated through degradation of methyl orange under visible light irradiation.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Selectivity in the Ligand Functionalization of Photocatalytic Metal Oxide Nanoparticles for Phase Transfer and Self-Assembly Applications

The functionalization of photocatalytic metal oxide nanoparticles of TiO₂, ZnO, WO₃ and CuO with amine-terminated (oleylamine) and thiol-terminated (dodecane-1-thiol) alkyl-chain ligands was studied under ambient conditions. A high selectivity was observed in the binding specificity of a ligand towards nanoparticles of these different oxides. It was observed that oleylamine binds stably to only TiO₂ and WO₃, whereas dodecane-1-thiol binds stably only to ZnO and CuO. Similarly, polar-to-nonpolar solvent phase transfer of TiO₂ and WO₃ nanoparticles could be achieved by using oleylamine, but not dodecane-1-thiol, whereas the opposite holds for ZnO and CuO. The surface chemistry of ligand-functionalized nanoparticles was probed by attenuated total reflectance (ATR)-FTIR spectroscopy, which enabled the occupation of the ligands at the active sites to be elucidated. The photostability of the ligands on the nanoparticle surface was determined by the photocatalytic self-cleaning properties of the material. Although TiO₂ and WO₃ degrade the ligands within 24 h under both UV and visible light, ligands on ZnO and CuO remain unaffected. The gathered insights are also highly relevant from an application point of view. As an example, because the ligand-functionalized nanoparticles are hydrophobic in nature, they can be self-assembled at the air-water interface to give nanoparticle films with demonstrated photocatalytic as well as anti-fogging properties.     

The Preparation and Characterization of La Doped TiO2 Nanotubes and Their Photocatalytic Activity

La-doped TiO₂ nanotubes (La/TiO₂ NTs) were prepared by the combination of sol-gel process with hydrothermal treatment. The prepared samples were characterized by using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectra, and ultraviolet-visible spectra. The photocatalytic performance of La/TiO₂ NTs was studied by testing the degradation rate of methyl orange under ultraviolet (UV) irradiation. The results indicated La/TiO₂ NTs calcined at 300°C consisted of anatase as the unique phase. The absorption spectra of the La/TiO₂ NTs showed a stronger absorption in the UV range and a slight red shift in the band gap transition than that of pure TiO₂ nanotubes. The photocatalytic performance of TiO₂ NTs could be improved by the doping of lanthanum ions, which is ascribed to several beneficial effects the formation of Ti-O-La bond and charge imbalance, existing of oxygen defects and Ti³⁺ species, stronger absorption in the UV range and a slight red shift in the band gap transition, as well as higher equilibrium dark adsorption of methyl orange. 0.75 wt% La/TiO₂ NTs had the best catalytic activity.     

Synthesis of W‐doped TiO2 by low‐temperature hydrolysis: Effects of annealing temperature and doping content on the surface microstructure and photocatalytic activity

A series of tungsten‐doped Titania photocatalysts were synthesized using a low‐temperature method. The effects of dopant concentration and annealing temperature on the phase transitions, crystallinity, electronic, optical, and photocatalytic properties of the resulting material were studied. The X‐ray patterns revealed that the doping delays the transition of anatase to rutile to a high temperature. A new phase W_yTi_1‐yO₂ appeared for 5.00 wt% W‐TiO₂ annealed at 900 °C. Raman and diffuse reflectance UV–Vis spectroscopy showed that band gap values decreased slightly up to 700 °C. X‐ray photoelectron spectroscopy showed that surface species viz. Ti³⁺, Ti⁴⁺, O^2?, oxygen‐vacancies, and adsorbed OH groups vary depending on the preparation conditions. The photocatalytic activity was evaluated via the degradation of methylene blue using LED white light. The degradation rate was affected by the percentage of dopants. The best photocatalytic activity was achieved with the sample labeled 5.00 wt% W‐TiO₂ annealed at 700 °C.     

二氧化钛与针铁矿复合光催化材料的制备与光催化性能

以四氯化钛为钛源,针铁矿(α-FeOOH)为载体,采用水解沉淀法制备了金红石相二氧化钛(Ti₂O)与α-FeOOH的复合光催化材料,并采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线能量散射谱和X射线光电子能谱对样品进行了表征.结果表明,低温下,金红石相Ti₂O包覆于α-FeOOH表面,并形成复合结构;较高温下,铁离子进入金红石相Ti₂O晶格,并形成铁掺杂金红石相Ti₂O纳米管;中温下,样品兼有复合和掺杂两者特征.在室温下以甲基橙为降解对象,采用钨灯+氘灯(波长200~800nm)为光源,对样品的光催化活性进行了测试.结果表明,样品对甲基橙的光催化降解效果良好;与纯α-FeOOH和金红石相Ti₂O相比,不同结构样品的光催化活性均有所提高,其中,复合兼掺杂型样品的光催化活性最高.由此可见,与α-FeOOH复合和铁掺杂是提高Ti₂O光催化活性的有效途径.     

基于纳米ZnO/聚氯乙烯的复合材料光催化性能研究

本文采用纳米氧化锌与聚氯乙烯溶液共混制备了复合材料前驱体，运用TG-DTA联机分析得到了其分解温度及相关热分解数据；经适当温度煅烧后得到复合材料光催化剂，并用TEM、XRD、FTIR、UV-Vis、ESR对复合材料进行分析表征。在室内普通照明用荧光灯作用下，以甲基橙溶液为催化对象，对复合材料的光催化性能进行了检测，并在相同条件下，与纳米氧化锌、纳米氧化钛及聚氯乙烯直接煅烧产物的光催化性能进行了比对分析；同时研究了pH值对复合材料光催化性能的影响。研究结果表明，复合材料对甲基橙催化降解8 min后，甲基橙溶     

Morphology control of TiO2 through hydrothermal synthesis method using protonic tetratitanate

Fibrous TiO₂ and plate-like TiO₂ were obtained through the hydrothermal synthesis method by using two kinds of protonic tetratitanate (H₂Ti₄O₉), prepared by ion exchange of K₂Ti₄O₉ and HCl, or milled K₂Ti₄O₉ and HCl, respectively. The product made by hydrothermal treatment of H₂Ti₄O₉ without milling in water consisted of anatase TiO₂ and retained the fibrous morphology of the precursor but with fine crystals attached on the surface, formed by the in?situ topotactic transformation reaction and dissolution and recrystallization. On the other hand, TiO₂ prepared with H₂Ti₄O₉ obtained through ion exchange of milled K₂Ti₄O₉ and HCl had plate-like shape, namely retaining the morphology of nanosheets of H₂Ti₄O₉ through an in?situ transformation process. Under ultraviolet irradiation, 70% methyl orange degradation by TiO₂ nanosheets was about 3.3 times higher than that by fibrous TiO₂. The higher surface area, higher pore volume, and smaller particle size led to the higher photocatalytic activity of the TiO₂ nanosheets.     

Superior Photostability and Photocatalytic Activity of ZnO Nanoparticles Coated with Ultrathin TiO2 Layers through Atomic‐Layer Deposition

Atomic‐layer deposition (ALD) is a thin‐film growth technology that allows for conformal growth of thin films with atomic‐level control over their thickness. Although ALD is successful in the semiconductor manufacturing industry, its feasibility for nanoparticle coating has been less explored. Herein, the ALD coating of TiO₂ layers on ZnO nanoparticles by employing a specialized rotary reactor is demonstrated. The photocatalytic activity and photostability of ZnO nanoparticles coated with TiO₂ layers by ALD and chemical methods were examined by the photodegradation of Rhodamine B dye under UV irradiation. Even though the photocatalytic activity of the presynthesized ZnO nanoparticles is higher than that of commercial P25 TiO₂ nanoparticles, their activity tends to decline due to severe photocorrosion. The chemically synthesized TiO₂ coating layer on ZnO resulted in severely declined photoactivity despite the improved photostability. However, ultrathin and conformal ALD TiO₂ coatings (≈0.75–1.5 nm) on ZnO improved its photostability without degradation of photocatalytic activity. Surprisingly, the photostability is comparable to that of pure TiO₂, and the photocatalytic activity to that of pure ZnO.     

室温一步固相反应合成纳米氧化锌的表征、光催化性能及动力学

以七水硫酸锌、氢氧化钠为原料,采用室温一步固相反应合成ZnO纳米粒子,并分别利用X射线衍射分析（XRD）、傅里叶变换红外光谱分析（FTIR）、热重分析（TG）、扫描电子显微分析（SEM）、透射电子显微分析（TEM）、N₂吸附-脱附、紫外可见漫反射光谱分析（UV-Vis DRS）等方法对ZnO纳米粒子进行表征。实验结果表明：不需任何添加剂,室温下可通过一步固相反应合成ZnO纳米粒子,其形成过程首先是ZnSO₄·7H₂O和NaOH充分接触,然后反应形成Zn₄SO₄（OH）₆·5H₂O,最后NaOH的溶解热可使Zn₄SO₄（OH）₆·5H₂O转变为ZnO并逐渐长大形成纳米粒子。同时以甲基橙为降解对象评价了ZnO纳米粒子的光催化活性,实验结果表明：紫外光照射下,该方法合成的ZnO纳米粒子对甲基橙具有较好的光催化活性,且光催化动力学方程符合准一级反应动力学。