Hydrothermal synthesis and fluorescence of YF3: Eu3+

<正>Europium(Ⅲ)-doped YF_3 is prepared by a hydrothermal process at 200℃.X-ray diffraction(XRD) pattern identifies the formation of YF_3 phase without detectable impurity.Environment scanning electron microscopy(ESEM) image shows the even size distribution of the samples with cubic morphology.The excitation and emission spectra of the rare earth ions doped YF_3 are investigated by fluorescence spectrophotometer.The excitation spectrum for 591 nm emission has several excitation bands at 320, 365,386,397 and 467 nm,and the main peak value was 397 nm.Typical Eu~(3+) emission peaks at 591 nm(~5D_0→~7F_1) and 612 nm (~5D_0→~7F_2) are observed when excited by 397 nm,and the strongest emission is 591 nm,demonstrating that the rare earth ions occupy the centrosymmetrical sites in YF_3.     

Hydrothermal Synthesis, Characterization and Photoluminescence Properties of GdOHCO3 Rhombic Microcrystals

GdOHCO₃ rhombic microcrystals were synthesized by hydrothermal method with urea used as the precipitator. Experimental parameters, such as the molar ratio of the starting reagents, reaction temperature and reaction time were examined. The as-obtained product was characterized by powder X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), X-ray photoelectron spectroscopy(XPS), Fourier transform infrared spectroscopy(FTIR) and spectrofluorometry. The main reactions to form GdOHCO₃ were proposed. In addition, the photoluminescence(PL) properties of GdOHCO₃ rhombic microcrystals were discussed. The broad band located between 350 nm and 600 nm in the emission spectrum can be attributed to the self-trapped exciton luminescence.     

Synthesis of Flower-like NaY(MoO4)2 and Optical Property of NaY(MoO4)2:Eu3+

Flower-like NaY(MoO₄)₂ particles were synthesized through a microwave-assisted hydrother-mal process followed by a subsequent calcination process. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron mi-croscopy. The possible formation mechanism of the flower-like NaY(MoO₄)₂ precursor was proposed. The NaY(MoO₄)₂:Eu³⁺ phosphors were also prepared and their luminescence properties showed the NaY(MoO₄)₂:Eu³⁺ materials with the emission peak at 612 nm had potential application as a red phosphor for white light-emitting diodes. Furthermore, the microwave-assisted hydrothermal process followed by a subsequent calcination process could be extended to prepare the other lanthanide molybdates with the flower-like morphology.     

Co掺杂ZnO纳米棒的水热法制备及其光致发光性能

以Zn(NO3)2·6H2O 和Co(NO3)2·6H2O为原料, 通过水热法在较低温度下制备了纯ZnO和Co掺杂的ZnO(ZnO:Co)纳米棒. 利用XRD、EDS、TEM和HRTEM对样品进行了表征, 结合光致发光(PL)谱研究了样品的PL性能. 结果表明, 水热法制备纯ZnO和ZnO:Co纳米棒均具有较好的结晶度. Co2+是以替代的形式进入ZnO晶格, 掺入量为2%(原子分数)左右. 纯的ZnO纳米棒平均直径约为20 nm, 平均长度约为180 nm; 掺杂样品的平均直径值约为15 nm, 平均长度约为200 nm左右; Co掺杂轻微地影响ZnO纳米棒的生长. 另外, Co掺杂能够调整ZnO纳米棒的能带结构、提高表面态含量, 进而使得ZnO:Co纳米棒的紫外发光峰位红移, 可见光发光能力增强.     

Li+,Eu3+共掺杂La2MoO6红色荧光粉的Pechini法合成及近紫外/蓝光激发下的发光特征

采用Pechini法合成了白光LED用红色荧光粉La_1.9-xMoO₆:0.10Eu³⁺,xLi⁺(x=0,0.10,0.20,0.25),并对样品分别进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、电子能谱(EDX)以及荧光光谱(PL)等技术手段分析。 PL光谱显示该荧光粉可被近紫外光(395 nm)和蓝光(466 nm)有效激发,产生616和623 nm强的红光发射,归属于Eu³⁺的⁵D₀→⁷F₂电偶极跃迁。该荧光粉与近紫外LED芯片(370~410 nm)和蓝光LED芯片(450~470 nm)均匹配良好,具有潜在的商业应用价值。 共掺Li⁺离子作为敏化剂能显著提高荧光粉的发光强度,且最优掺杂量为x=0.20。     

Eu3+或Tb3+掺杂的KY2F7纳米球的制备与表征

利用简单的室温液相反应制备了KY₂F₇及镧系离子掺杂的KY₂F₇∶Eu³⁺和KY₂F₇∶Tb³⁺的纳米球，并利用XRD，TEM，SEM，XRF和荧光光谱对所制备的材料进行了表征。研究表明Eu³⁺或Tb³⁺离子已成功地掺杂在KY₂F₇纳米球中。掺杂     

Er3+和Ce3+/Ce4+掺杂β-BaB2O4纳米棒的制备、结构与发光性质

以Ba(NO3)2、NaBH4、Er2O3和CeO2为原料, 在十六烷基三甲基溴化铵(CTAB)表面活性剂辅助下, 采用水热法制备了β-BaB2O4 (β-BBO)纳米棒, 稀土离子Er3+单掺杂的β-BBO(β-BBO:Er3+)及Er3+和Ce3+/Ce4+共掺杂的β-BBO(β-BBO:Er3+/Ce3+/Ce4+)纳米棒. 通过X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)和光致发光(PL)光谱分别对样品的物相、结构、形貌、成分及光致发光性质进行了表征. 研究结果表明: 微量稀土离子掺杂并不改变β-BBO的结构, 制得的纳米棒尺寸均匀, 长度在200-500 nm 之间, 直径在10-20 nm 之间; β-BBO:Er3+和β-BBO:Er3+/Ce3+/Ce4+纳米棒在400nm光激发下, 在可见光范围内都观察到中心波长为515和542 nm的绿光. 对发光机理的初步研究表明: 发光分别对应于Er3+的2H11/2→4I15/2, 4S3/2→4I15/2跃迁, 铈离子以Ce3+和Ce4+两种形式存在于体系中, Ce3+对Er3+起敏化作用, 可以显著增强β-BBO:Er3+/Ce3+/Ce4+纳米棒的发光强度, 存在Ce3+→Er3+的能量传递过程.     

Eu2+掺杂KCaCl3晶体的生长及发光性能

通过坩埚下降法生长出不同物质的量分数Eu²⁺掺杂的KCa_1-xEu_xCl₃（x=0.005、0.01、0.02、0.03、0.05）单晶,并对晶体进行了X射线粉末衍射、热重、透过率、光致发光光谱、衰减时间、X射线激发发射光谱等测定。通过相图及结构分析,判断出该晶体为一致熔融化合物,并得出其为正交结构,晶胞参数为a=0.756 04 nm,b=1.048 23 nm,c=0.726 57 nm,空间群为Pnma（62）。在紫外光的激发下,晶体在434 nm左右有一个宽的发射峰,对应于Eu²⁺的4f⁶5d¹→4f⁷跃迁;光致衰减时间1.473 μs,晶体在X射线激发下的发光强度随Eu²⁺离子浓度增加而增强。     

模板法制备介孔氧化铝及Eu3+离子组装

通过溶胶-凝胶法,以三嵌段共聚物F-127为模板制备有序介孔氧化铝(P-Al2O3)粉末,用热失重分析、X射线粉末衍射(XRD)、低角X射线粉末衍射(LAXRD)和比表面测量仪进行物相分析与孔径分析,利用高倍透射电子显微镜(HRTEM)表征介孔材料的形貌.研究表明,40℃下制备的介孔氧化铝经过高温除模板后,孔径大小分布较集中,有序性好.进一步通过水热反应法,获得了Eu3 的P-Al2O3组装体.研究了组装体系的光谱特性,并观察到介孔氧化铝基质与客体离子Eu3 之间产生的能量传递现象.     

Eu3+掺杂B2O3-CaO发光材料的制备及其发光性能

采用溶胶凝胶法制得高纯的B₂O₃-CaO∶Eu³⁺荧光粉。用XRD、IR对不同退火温度下所得样品的结构进行表征,结果发现随退火温度的变化,能形成不同结构的硼酸盐基质。通过对以不同结构硼酸盐为基质荧光粉的激发、发射谱图及荧光衰减曲线的分析,探讨了材料的发光性能和发光机理。结果表明,在不同结构硼酸盐基质中,Eu³⁺都处于无反演对称中心格位,以（⁵D₀→F₂）电偶极跃迁为主,所以材料主要发红光;且900℃退火所得高纯相的CaB₂O₄基质最有利于发光、对应的荧光衰减时间最长,这都因在此荧光粉中Eu³⁺更易取代Ca²⁺,并形成相对较多的p-n结和陷阱所致。     

白色荧光粉NaGd（MoO4）2:Dy3+,Eu3+的水热合成及发光性能

采用谷氨酸辅助水热法合成了八面体形NaGd(MoO4)2:Dy3+,Eu3+白色荧光粉.X射线衍射结果表明,合成的样品为四方晶系的NaGd(MoO4)2纯相.扫描电子显微镜照片显示所制备的粒子为八面体形,各边长约为2μm.荧光光谱结果表明,在NaGd(MoO4)2:4%Dy3+,yEu3+(y=0,0.5%,0.6%,0.7%,0.8%,0.9%,1.0%)样品中,随着Eu3+掺入量的增加,Dy3+的发射峰逐渐减弱,而Eu3+的发射峰逐渐增强,说明Dy3+-Eu3+之间存在能量传递.通过色坐标图可知,当Eu3+掺杂量y=0.9%时,荧光粉的色坐标(0.338,0.281)与标准的白光色坐标(0.33,0.33)接近,表明NaGd(MoO4)2:4%Dy3+,0.9%Eu3+是很好的近紫外光激发下的白色荧光粉.     

多级结构Mg3B2O6:Eu3+花状微球的制备、表征及其发光性能

以硝酸镁(Mg(NO₃)₂·6H₂O)和硼砂(Na₂B₄O₇·10H₂O)为原料,稀土元素Eu³⁺为激活剂,采用聚乙烯吡咯烷酮(PVP)辅助共沉淀法得到前驱体,并通过焙烧制备了多级结构Mg₃B₂O₆:Eu³⁺花状微球。通过XRD、SEM、TEM以及荧光光谱等手段分别对前驱体煅烧产物的结构、形貌、组成和荧光特性进行了表征。实验表明,在波长为393 nm激发光的激发下,所得到的产品在612 nm处有明显的特征发射峰,对应于Eu³⁺的(⁵D₀→⁷F₂)特征跃迁发射。这一荧光性质使得该材料在荧光灯、显示系统和光电设备应用中具有广阔的前景。同时我们还探讨了微球的形态、Eu³⁺的掺杂量及焙烧温度对花状微球荧光性能的影响。     

多级结构Mg3B2O6: Eu3+花状微球的制备、表征及其发光性能

以硝酸镁(Mg(NO₃)₂·6H₂O)和硼砂(Na₂B₄O₇·10H₂O)为原料, 稀土元素Eu³⁺为激活剂, 采用聚乙烯吡咯烷酮(PVP)辅助共沉淀法得到前驱体, 并通过焙烧制备了多级结构Mg₃B₂O₆: Eu³⁺花状微球。通过XRD、SEM、TEM以及荧光光谱等手段分别对前驱体煅烧产物的结构、形貌、组成和荧光特性进行了表征。实验表明, 在波长为393 nm激发光的激发下, 所得到的产品在612 nm处有明显的特征发射峰, 对应于Eu³⁺的(⁵D₀→⁷F₂)特征跃迁发射。这一荧光性质使得该材料在荧光灯、显示系统和光电设备应用中具有广阔的前景。同时我们还探讨了微球的形态、Eu³⁺的掺杂量及焙烧温度对花状微球荧光性能的影响。     

CaSb2O6:Bi3+,Eu3+荧光粉的制备和发光性质

采用共沉淀法及1 200 ℃后续煅烧4 h,成功制备了CaSb₂O₆:Bi³⁺,Eu³⁺荧光粉,并对其结构及发光性能进行了研究。所制备荧光粉颗粒为六边形类圆饼状,平均尺寸在100~600 nm之间。对CaSb₂O₆:Bi³⁺,Eu³⁺发光的机理分析表明,Bi³⁺对Eu³⁺的发光存在高效的敏化与能量传递。当Bi³⁺和Eu³⁺的掺杂浓度分别为0.5%和8%,Eu³⁺位于580 nm(⁵D₀→⁷F₀ )处的荧光发射显著增强,Bi³⁺,Eu³⁺共掺样品的荧光强度是CaSb₂O₆:Eu³⁺的10倍左右。调节Bi³⁺/Eu³⁺离子掺杂比,色坐标呈现了从蓝、白光到红光的变化,表明该荧光粉可分别作为蓝或红色荧光粉使用,甚至可实现从蓝、白光到红光的自由调控,这为白光LED荧光粉的发展提供了参考。     

Rapid Synthesis and Photoluminescence Properties of Eu-doped ZnO Nanoneedles via Facile Hydrothermal Method

Eu-doped ZnO nanoneedles with different doping concentrations were prepared via the facile hydrothermal method.The crystal structure,morphology and photoluminescence property of the ZnO nanoneedles were characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,X-ray photoelectron spectroscopy（XPS）,photoluminescence spectroscopy（PL） and Raman spectroscopy.The results show that the europium ions are incorporated into the crystal lattice of ZnO matrix in trivalent ions.The nanoneedles are 2-3 μm in length and 100 nm in the tip diameter.PL and Raman measurements indicate that higher Eu^3＋ doping concentration may destroy the crystallization of the nanoneedles and decrease the ratio of IUV/IDLE,which is mainly due to the more defects in the doped ZnO nanoneedles.And the characteristic red emissions of Eu^3＋ ions are found by the PL spectroscopy with the Eu^3＋doping concentration increasing,which are attributed to the ^5D0→^7F0,^5D0→^7F1 and ^5D0→^7F2 transitions.     

Eu3+、Ga3+共掺杂SiO2基质材料的制备及其发光性质

通过溶胶-凝胶方法制备了稀土离子Eu³⁺和Ga³⁺共掺杂的SiO₂材料;利用IR、XRD等研究了材料的结构,结果表明材料属于非晶态,800 ℃退火后样品的主要结构仍为SiO₂的网状结构。400 ℃退火的样品在393 nm激发下发射光谱显示了Eu³⁺的特征发射光谱,产生3条明显谱带,分别是576 nm(⁵D₀-⁷F     

Ba_3Y(PO_4)_3∶Dy~(3+),Eu~(3+)单基质白光荧光粉的制备与发光性能

为了探究在Dy~(3+)掺杂Ba_3Y(PO_4)_3荧光粉中共掺Eu~(3+)离子对其发光性能的影响,我们采用传统高温固相法制备了一系列Dy~(3+)、Eu~(3+)单掺杂和共掺杂Ba_3Y(PO_4)_3荧光粉。通过X射线衍射(XRD)、荧光发射光谱和荧光衰减曲线对样品进行了表征。结果表明,所制备的荧光粉呈闪铋矿立方相。在近紫外光激发下,Ba_3Y(PO_4)_3∶Dy~(3+)发射光谱在487和578 nm处有两个窄带发射峰,呈冷白光发射;Ba_3Y(PO_4)_3∶Eu~(3+)发射光谱的窄带发射位于594和616 nm处,呈发橙红光。在Ba_3Y(PO_4)_3∶Dy~(3+),Eu~(3+)中,由于Eu~(3+)离子补偿Dy~(3+)冷白光发射所缺的红色组分,从而实现了色纯度高、色温适中的暖白光发射。进一步探索了Ba_3Y(PO_4)_3∶Dy~(3+),Eu~(3+)荧光粉发光机理。所制备的Ba_3Y(PO_4)_3∶Dy~(3+),Eu~(3+)单基质白光荧光粉在白光近紫外激发白光二极管(UVWLED)领域具有潜在应用价值。     

Electrode kinetics of Eu3+/Eu2+ reaction by cyclic voltammetry

The cyclic voltammetric behaviour of Eu³⁺/Eu²⁺ couple at hanging mercury drop electrode (HMDE) has been studied in chloride, bromide, iodide, thiocyanate and EDTA supporting electrolytes. The apparent rate constant and transfer coefficient for these systems have been calculated at various voltage scan rates, without using the data for standard or formal potential. The values have been compared with those obtained by earlier workers through other electrochemical methods.     

Ag@YF3:Eu3+核壳结构纳米材料的制备与性能研究

采用乙二醇法制备了单质Ag纳米粒子,并通过直接沉淀法合成了均匀球形的Ag@YF3∶Eu3+核壳结构复合纳米发光粒子,对产物的结构和性能进行了表征。XRD分析表明:Ag表面包覆上了结晶良好的正交晶系的YF3∶Eu3+。TEM照片表明:所得的纳米复合粒子具有明显的核壳结构和均匀的球形,中间Ag粒子的尺寸在80~100 nm之间,Ag@YF3∶Eu3+的粒径尺寸约为150~180 nm,表面粗糙且包覆完全。电子衍射表明复合样品为多晶。荧光光谱表明:该纳米复合粒子具有良好的发光性,以593 nm附近的5D0→7F1磁偶极跃迁为最强发射峰,但是比纯的YF3∶Eu3+的发光强度要弱,其荧光寿命有所增强,这表明Ag纳米粒子对外层的YF3∶Eu3+的发光有猝灭作用。     

有序介孔Al2O3∶RE3+的制备及Gd3+对Eu3+的能量传递

以P123为表面活性剂,异丙醇铝为铝源,用简易溶胶-凝胶法,获得了单掺和双掺Gd3+,Eu3+的介孔氧化铝组装体。用广角X-射线衍射仪(WAXD)进行了物相分析;小角X-射线衍射仪(SAXD)、比表面仪进行了孔结构分析和形貌表征;研究了组装体的发光性能并发现Gd3+对Eu3+有能量传递作用,并分析了能量传递过程。