Coupled heat and mass transfer in mixed convection over a vertical flat plate embedded in saturated porous media: PST/PSC or PHF/PMF

A boundary layer analysis is used to investigate the heat and mass transfer characteristics of mixed convection about a vertical flat plate embedded in a saturated porous medium under the coupled effects of thermal and mass diffusion. The plate is maintained at prescribed surface temperature/concentration (PST/PSC) or prescribed heat/mass flux (PHF/PMF). The nonsimilar governing equations are obtained by using a suitable transformation and solved by Keller box method. Numerical results for the local heat transfer rate and the local mass transfer rate are presented for various parameters. The local heat and mass transfer rates increase with increasing n and m and buoyancy parameter ξ. When buoyancy parameter ξ is very small (large) the value of local Nusselt and the local Sherwood number correspond with the pure forced (free) convection, respectively. Increasing buoyancy ratio N (or N ^*) increases the local heat and mass transfer rates. It is apparent that Lewis number has a pronounced effect on the local mass transfer rate than it does on the local heat transfer rate. Furthermore, increasing Lewis number decreases (increases) the local heat (mass) transfer rate. Received on 8 December 1997     

Free convection in non-newtonian fluids along a horizontal plate in a porous medium

A similarity solution is presented for the problem of free convection boundary layer in power-law type non-Newtonian fluids along a horizontal plate with variable wall temperature or heat flux distribution. The effects of surface mass transfer are included. Numerical results are presented for the details of the velocity and temperature fields. A discussion is provided for the effect of viscosity index on the surface heat transfer rate.     

Unsteady flow with heat and mass transfer due to impingement of slot jet on an inclined plate

The unsteady laminar incompressible boundary layer flow due to a two-dimensional slot jet on a flat plate at an angle of attack has been studied. The unsteadiness in the flow field is due to the free stream velocity distribution or wall temperature (concentration) which varies with time. The governing partial differential equations in primitive variables have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. The effect of the variation of the free stream velocity distribution with time is found to be more pronounced on the skin friction than on the heat or mass transfer. The Prandtl number and the variation of the wall temperature with time strongly affect the heat transfer. Similarly, the Schmidt number and the variation of the concentration at the wall with time strongly affect the mass transfer. Beyond a certain critical value of the viscous dissipation parameter, the plate gets heated instead of being cooled.     

Nonsimilar solutions for free convection from a vertical plate in porous media

A nonsimilar boundary layer analysis has been presented for the free convection along a vertical plate embedded in a fluid-saturated porous medium in the presence of surface mass transfer and internal heat generation. The transformed conservation laws are solved numerically for the cases of variable wall temperature and variable wall heat flux boundary conditions. Results are presented for the details of the velocity and temperature fields as well as Nusselt number. Received on 13 December 1996     

Thermophoresis particle deposition in a non-Darcy porous medium under the influence of Soret, Dufour effects

Thermophoresis particle deposition in free convection on a vertical plate embedded in a fluid saturated non-Darcy porous medium is studied using similarity solution technique. The effect of Soret and Dufour parameters on concentration distribution, wall thermophoretic deposition velocity, heat transfer and mass transfer is discussed in detail for different values of dispersion parameters (Ra _γ, Ra _ξ) inertial parameter F and Lewis number Le. The result indicates that the Soret effect is more influential in increasing the concentration distribution in both aiding as well as opposing buoyancies. Also, the non-dimensional heat transfer coefficient and non-dimensional mass transfer coefficient changes according to different values of thermophoretic coefficient k.     

Influence of chemical reaction on heat and mass transfer of non-Newtonian fluid with yield stress by free convection from vertical surface in porous medium considering Soret effect

The effect of chemical reaction on free convection heat and mass transfer for a non-Newtonian power law fluid over a vertical flat plate embedded in a fluid-saturated porous medium has been studied in the presence of the yield stress and the Soret effect. The governing boundary layer equations and boundary conditions are cast into a dimen- sionless form by similarity transformations, and the resulting system of equations is solved by a finite difference method. The results are preSented and discussed for concentration profiles, as well as the Nusselt number and the Sherwood number for various values of the parameters, which govern the problem. The results obtained show that the flow field is influenced appreciably by the presence of the chemical reaction parameter γ the order of.the chemical reaction parameter m, the Soret number St, the buoyancy ratio N, the Lewis number Le, and the dimensionless rheological parameter Ω.     

Nonlinear convection in a non-Darcy porous medium

In this paper, the natural convection in a non-Darcy porous medium is studied using a temperature-concentration-dependent density relation. The effect of the two parameters responsible for the nonlinear convection is analyzed for different values of the inertial parameter, dispersion parameters, Rayleigh number, Lewis number, Soret number, and Dufour number. In the aiding buoyancy, the tangential velocity increases steeply with an increase in the nonlinear temperature parameter and the nonlinear concentration parameter when the inertial effect is zero. However, when the inertial effect is non-zero, the effect of the nonlinear temperature parameter and the nonlinear concentration parameter on the tangential velocity is marginal. The concentration distribution varies appreciably and spreads in different ranges for different values of the double dispersion parameters, the inertial effect parameter, and also for the parameters which control the nonlinear temperature and the nonlinear concentration. Heat and mass transfer varies extensively with an increase in the nonlinear temperature parameter and the nonlinear concentration parameter depending on Dacry and non-Darcy porous media. The variation in heat and mass transfer when all the effects, i.e., the inertial effect, double dispersion ef- fects, and Soret and Dufour effects, are simultaneously zero and non-zero. The combined effects of the nonlinear temperature parameter, the nonlinear concentration parameter and buoyancy are analyzed. The effect of the nonlinear temperature parameter and the nonlinear concentration parameter and also the cross diffusion effects on heat and mass transfer are observed to be more in Darcy porous media compared with those in non- Darcy porous media. In the opposing buoyancy, the effect of the temperature parameter is to increase the heat and mass transfer rate, whereas that of the concentration parameter is to decrease.     

Soret and Dufour Effects on Double-Diffusive Free Convection Over a Vertical Truncated Cone in Porous Media with Variable Wall Heat and Mass Fluxes

This work studies the Soret and Dufour effects on the double-diffusive free convection over a downward-pointing vertical truncated cone with variable wall heat and mass fluxes in fluid-saturated porous media. A coordinate transformation is used to derive the nondimensional boundary-layer governing equations, and the obtained nonsimilar equations are then solved by the cubic spline collocation method. Results for local surface temperature and the local surface concentration are presented as functions of Soret parameters, Dufour parameters, power-law exponents, buoyancy ratios, and Lewis numbers. Results show that increasing the Dufour parameter tends to increase the local surface temperature, while it tends to decrease the local surface concentration. An increase in the Soret number leads to a decrease in the local surface temperature for buoyancy assisting flows, while it leads to an increase in the local surface temperature for buoyancy opposing flows. Increasing the Soret number tends to increase the local surface concentration. Moreover, the local surface temperature and the local surface concentration of the truncated cones with higher power-law exponents are lower than those with lower exponents.     

Forced and mixed convection boundary layer flow along a flat plate with variable viscosity and variable Prandtl number: new results

The steady laminar boundary layer flow along a flat plate is studied taking into account the variation of fluid viscosity and fluid Prandtl number with temperature. In the forced convection case the plate moves with constant velocity and its temperature varies in power law with x. In the mixed convection case the plate temperature is constant and the fluid moves upwards due to an external free stream and due to buoyancy forces. The results are obtained with the direct numerical solution of the boundary layer equations. The study concerns the wall heat transfer, the wall shear stress and velocity and temperature profiles across the boundary layer. The results of the present work are different from those existing in the literature, which have been obtained with the assumption of constant Pr number.     

Numerical solutions of free convection boundary layer flow on a solid sphere with Newtonian heating in a micropolar fluid

In this paper, the problem of free convection boundary layer flow on a solid sphere in a micropolar fluid with Newtonian heating, in which the heat transfer from the surface is proportional to the local surface temperature, is considered. The transformed boundary layer equations in the form of partial differential equations are solved numerically using an implicit finite-difference scheme. Numerical solutions are obtained for the local wall temperature, the local skin friction coefficient, as well as the velocity, angular velocity and temperature profiles. The features of the flow and heat transfer characteristics for different values of the material or micropolar parameter K, the Prandtl number Pr and the conjugate parameter γ are analyzed and discussed.     

Nonsimilar Boundary Layer Analysis of Free Convection Heat Transfer Over a Vertical Cylinder in Bidisperse Porous Media

This work presents a boundary layer analysis for the free convection heat transfer from a vertical cylinder in bidisperse porous media with constant wall temperature. A boundary layer analysis and the two-velocity two-temperature formulation are used to derive the nonsimilar governing equations. The transformed governing equations are solved by the cubic spline collocation method to yield computationally efficient numerical solutions. The effects of inter-phase heat transfer parameter, modified thermal conductivity ratio, and permeability ratio on the heat transfer and flow characteristics are studied. Results show that an increase in the modified thermal conductivity ratio and the permeability ratio can effectively enhance the free convection heat transfer of the vertical cylinder in a bidisperse porous medium. Moreover, the thermal nonequilibrium effects are strong for low values of the inter-phase heat transfer parameter.     

Soret and Dufour effects on heat and mass transfer by mixed convection over a vertical surface saturated porous medium with temperature dependent viscosity

The diffusion‐thermo and thermal‐diffusion effects on heat and mass transfer by mixed convection boundary layer flow over a vertical isothermal permeable surface embedded in a porous medium were studied numerically in the presence of chemical reaction with temperature‐dependent viscosity. The governing nonlinear partial differential equations are transformed into a set of coupled ordinary differential equations, which are solved numerically by using Runge–Kutta method with shooting technique. Numerical results are obtained for the velocity, temperature and concentration distributions, and the local skin friction coefficient, local Nusselt number and local Sherwood number for several values of the parameters, namely, the variable viscosity parameter, suction/injection parameter, Darcy number, chemical reaction parameter, and Dufour and Soret numbers. The obtained results are presented graphically and in tabulated form, and the physical aspects of the problem are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Radiation effect on mixed convection along a vertical plate with uniform surface temperature

This paper investigates the effect of radiation on the forced and free convection flow of an optically dense viscous incompressible fluid along a heated vertical flat plate with uniform free stream and uniform surface temperature with Rosseland diffusion approximation. With appropriate transformations, the boundary layer equations governing the flow are reduced to local nonsimilarity equations valid in the forced convection regime as well as in the free convection regime. A group of transformation is, also, introduced to reduce the boundary layer equations to a set of local nonsimilarity equations valid in both the forced and free convection regimes. Solutions of the governing equations are obtained by employing the implicit finite difference methods together with Keller box scheme and are expressed in terms of local shear stress and local rate of heat transfer for a range of values of the pertinent parameters.     

Locally similar solutions for hydromagnetic and thermal slip flow boundary layers over a flat plate with variable fluid properties and convective surface boundary condition

This paper presents heat transfer process in a two-dimensional steady hydromagnetic convective flow of an electrically conducting fluid over a flat plate with partial slip at the surface of the boundary subjected to the convective surface heat flux at the boundary. The analysis accounts for both temperature-dependent viscosity and temperature dependent thermal conductivity. The local similarity equations are derived and solved numerically using the Nachtsheim-Swigert iteration procedure. Results for the dimensionless velocity, temperature and ambient Prandtl number within the boundary layer are displayed graphically delineating the effect of various parameters characterizing the flow. The results show that momentum boundary layer thickness significantly depends on the surface convection parameter, Hartmann number and on the sign of the variable viscosity parameter. The results also show that plate surface temperature is higher when there is no slip at the plate compared to its presence. For both slip and no-slip cases surface temperature of the plate can be controlled by controlling the strength of the applied magnetic field. In modelling the thermal boundary layer flow with variable viscosity and variable thermal conductivity, the Prandtl number must be treated as a variable irrespective of flow conditions whether there is slip or no-slip at the boundary to obtain realistic results.     

Free convection on a vertical plate with uniform and constant heat flux in a thermally stratified micropolar fluid

This paper analyzes flow and heat transfer characteristics of the free convection on a vertical plate with uniform and constant heat flux in a thermally stratified micropolar fluid. The dimensionless forms of boundary layer equations and their associated boundary conditions have been derived and the numerical results have been obtained using the method of cubic spline collocation with a finite difference scheme. The effects of the micropolar and stratification parameters on the dimensionless wall temperature, skin friction parameter and wall couple stress are discussed.     

Radiative heat transfer in a hydromagnetic nanofluid past a non-linear stretching surface with convective boundary condition

Heat transfer characteristics of a two-dimensional steady hydromagnetic natural convection flow of nanofluids over a non-linear stretching sheet taking into account the effects of radiation and convective boundary condition has been investigated numerically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The local similarity solutions are obtained by using very robust computer algebra software Maple 13. The results corresponding to the dimensionless temperature profiles and the reduced Nusselt number, Sherwood number and skin friction coefficient are displayed graphically for various pertinent parameters. The results show that temperature within the boundary layer is enhanced with the increase of the Biot number, buoyancy due to nanoparticle concentration, strength of the applied magnetic field, Brownian motion parameter, and thermophoresis parameter. An opposite trend is observed for the increase of the buoyancy due to temperature, stretching index, and the radiation parameter. The results also show that the local rate of heat transfer strongly depends on the nonlinear stretching index, radiation parameter, Biot number, Brownian motion parameter, and thermophoresis parameter.     

Soret and Dufour effect on double diffusion mixed convection from a vertical surface in a porous medium saturated with a non-Newtonian fluid

A non-similar boundary layer analysis is presented to study the flow, heat and mass transfer characteristics of non-Darcian mixed convection of a non-Newtonian fluid from a vertical isothermal plate embedded in a homogeneous porous medium with the effect of Soret and Dufour and in the presence of either surface injection or suction. The value of the mixed-convection parameter lies between 0 and 1. In addition, the power-law model is used for non-Newtonian fluids with exponent n < 1 for pseudoplastics n = 1 for Newtonian fluids and n > 1 for dilatant fluids. Furthermore, the coordinates and dependent variables are transformed to yield computationally efficient numerical solutions that are valid over the entire range of mixed convection, from the pure forced-convection limit to the pure free-convection limit, and the whole domain of non-Newtonian fluids, from pseudoplastics to dilatant fluids. The numerical solution of the problem is derived using a Runge–Kutta integration scheme with Newton–Raphson shooting technique. Distributions for velocity, temperature and concentration, as well as for the rate of wall heat and mass transfer, have been obtained and discussed for various physical parametric values.     

Lie group analysis for thermophoretic and radiative augmentation of heat and mass transfer in a Brinkman-Darcy flow over a flat surface with heat generation

A boundary layer analysis is presented to investigate numerically the effects of radiation,thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium.The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters.Comparisons with previously published work are performed and the results are found to be in very good agreement.Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity,temperature and concentration profiles as well as the local skin-friction coefficient,wall heat transfer,particle deposition rate and wall thermophoretic deposition velocity.The results show that the magnetic field induces acceleration of the flow,rather than deceleration(as in classical magnetohydrodynamics(MHD) boundary layer flow) but to reduce temperature and increase concentration of particles in boundary layer.Also,there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.     

Laminar forced convection conjugate heat transfer over a flat plate

Coupled heat transfer between laminar forced convection along and conduction inside a flat plate wall is theoretically studied. The laminar convective boundary layer is analyzed by employing the integral technique. The energy equations for the fluid and the plate wall are combined under the condition of the continuity in the temperature and heat flux at the fluid-solid interface. The analysis results in a simple formal solution. Expressions have been obtained for calculating local Nusselt number, wall heat flux and temperature along the plate, all are functions of the local Brun number, Br _x , which is a measure of the ratio of the thermal resistance of the plate to that of the convective boundary layer. The results indicate that for Br _x ≥0.15, neglecting the plate resistance will results in an error of more than 5% in Nusselt number. Comparison of the present solution with other previous studies has been made. The solution may be of a considerable theoretical and practical interest. Received on 19 August 1998     

Numerical modeling of incline plate LiBr absorber

Among major components of LiBr–H₂O absorption chillers is the absorber, which has a direct effect on the chillier size and whose characteristics have significant effects on the overall efficiency of absorption machines. In this article, heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water-cooled incline plate absorber in the Reynolds number range of 5 < Re < 150 is performed numerically. The boundary layer assumptions are used for the mass, momentum and energy transport equations and the fully implicit finite difference method is employed to solve the governing equations. Dependence of lithium bromide aqueous properties to the temperature and concentration is employed as well as dependence of film thickness to vapor absorption. An analysis for linear distribution of wall temperature condition carries out to investigate the reliability of the present numerical method through comparing with previous investigation. The effect of plate angle on heat and mass transfer parameters is investigated and the results show that absorption mass flux and heat and mass transfer coefficient increase as the angle of the plate increase. The main parameters of absorber design, namely Nusselt and Sherwood numbers, are correlated as a function of Reynolds Number and the plate angle.