CH3F absorption of the CO2-laser emission measured by the photoacoustic technique

Spectra of coincidence of CH₃F IR absorption with CO₂-laser emission at pressures of 2, 10 and 60 Torr were recorded by the use of a photoacoustic detection method in the whole range of CO₂-laser emission. The spectra show that CH₃F absorbs many CO₂-laser lines in the range 1084–1071 cm⁻¹ with the strongest absorption at 1046.80cm⁻¹, laser line P(20). Absorption is predominantly due to the fundamental of v₃, which is well spread over the whole laser emission range. The intensities of all absorptions rise with increasing pressure, but some absorptions change their relative intensity with respect to one another. In addition, the fine structure of the line spectrum, characteristic of lower pressure samples, disappears as pressure is increased.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Buffer gas effect on laser photoacoustic spectra of methyl chloride

Spectra of coincidence of CH₃C1 IR absorption with CO₂-laser emission were recorded by a photoacoustic detection method in the whole range of CO₂-laser emission. The samples were neat gas and mixtures with argon, at several pressures (10 to 600Torr) so that pressure effects could be observed. The results show that argon affects absorption of CO₂-laser emission quite differently from neat chloromethane, both regarding the most prominent coincidences and background absorption.     

Spectral properties of Nd-doped BiB3O6 crystal

Transparent Nd: BiB₃O₆ crystal has been grown by top-seeded method. The refraction indices of the crystal were measured and the parameters of chromatic dispersion were fitted. The room temperature absorption spectra of the crystal have been measured and compared with that of 0.2 mol/L NdCl₃ solution. According to Judd-Ofelt (JO) theory, the spectral strength parameters Ω₂ = 0.1776×10⁻²⁰ cm², Ω₄ = 0.1282−10⁻²⁰1 cm² and Ω₆ = 0.1357X10^-20 cm² of Nd³⁺ ion were fitted. The radiative transition probabilities A_J,J’, oscillator strengths f_J,J’, radiative lifetime rand the branching ratio β_J’ have all been calculated. Based on these parameters, the properties and application perspective are discussed.     

XRD and UV-Vis diffuse reflectance analysis of CeO2-ZrO2 solid solutions synthesized by combustion method

A series of ceria-incorporated zirconia (Ce_1−xZr_xO₂,x = 0 to 1) solid solutions were prepared by employing the solution combustion synthesis route. The products were characterized by XRD and UV-Vis-NIR diffuse reflectance spectroscopy. The materials are crystalline in nature and the lattice parameters of the solid solution series follow Vegard’s law. Diffuse reflectance spectra of the solid solutions in the UV region show two intense bands at 250 and 297 nm which are assigned respectively to Ce³⁺ ← O²⁻and Ce⁴⁺ ← O²⁻ charge transfer transitions. The two vibrational bands in 6960 cm⁻¹ and 5168 cm⁻¹ in the NIR region indicate the presence of surface hydroxyl groups on these materials.     

Photoacoustic study of CO2-laser coincidences with absorption of some organic solvent vapours

Detection of specific molecules in the atmosphere is motivated by the need for monitoring the emission of industrial pollutants. CO₂-laser photoacoustic (PA) spectroscopy was used here to obtain coincidence spectra of the vapours of three organic solvents: trichloroethylene (TCE), benzene, and dioxan. Spectra of coincidences were obtained as a function of total pressure, adding dry air to the vapour of the solvents up to 1000 mbar.A narrow cavity photoacoustic cell with window acoustic buffers was built for improved sensitivity, and is reported here.The vapour molecules studied do have some significant absorption in the CO₂-laser region, or close to it, but that fact does not necessarily lead to usable coincidences with the narrow laser lines. The results reveal several prominent coincidences that can be used for practical purposes, especially in the case of trichloroethylene.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Kinetic and Spectroscopic Study of C2H5C(O)O2 Radicals Using Laser Flash Photolysis and UV Absorption Spectrometry

Rate constant for the self-combination reaction of the propionylperoxy radical was measured at room temperature using laser photolysis - transient absorption technique. The observed rate coefficient is (1.44 ± 0.14)x10⁻¹¹ cm³ molecule⁻¹ s⁻¹ at 298 K. This revised version was published online in June 2006 with corrections to the Cover Date.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Theoretical sstudy on the Co2+OH2+/Co3+OH2+ electron transfer reactivity

This paper presents a contact distance dependence analysis scheme and an abinitio calculation application for the electron transfer (ET) reactivity of Co²⁺OH₂/Co³⁺OH² reacting pair. The applicability of these schemes and the corresponding models has been discussed. The contact distance (R _CoCo) dependence of the relevant quantities has been analyzed. The results indicate that the activation energy from the accurate PES method agrees well with that from the anharmonic potential method, and they are obviously better than that from the harmonic potential method. The pair distribution function varies from 10⁻² to 10⁻⁵ along withR _CoCo changing from 1.20 to 0.35 nm. The coupling matrix element exponentially decays along with the increase ofR _CoCo, and the effective electronic coupling requiresR _CoCo smaller than 0.75 nm. In the range from 0.50 to 0.75 nm forR _CoCo, the corresponding electronic transmission coefficient falls within 1.0—10⁻⁶. The local ET rate also exponentially decays along with the increase ofR _CoCo due to the electronic factor. Since the contribution from the pair distribution function to the total ET rate is an inverse measure of that from the electronic factor, the variation of the spherically averaged local ET rate along withR _CoCo exhibits a parabola with a maximum at 0.50 nm ofR _CoCo. This maximum is close to the overall observed ET rate value. For this mono-hydrated transition metal ionic system, the ET rate generally is about 10⁶ L·mol⁻¹·s⁻¹ in gaseous process. Further, since it is impossible to experimentally determine the structures and their PESs of these hydrated systems, especially for the unstable intermediate species,ab initio calculations can play an effective auxiliary role in discussing the ET reactivities of these kinds of reacting systems.     

Influence of support acidity on electronic state of platinum in oxide systems promoted by SO4 2− anions

The electronic state of platinum supported on SO₄/ZrO₂, SO₄/TiO₂, SO₄/Al₂O₃, and SO₄/SiO₂ systems and on systems unpromoted by sulfur was investigated by diffuse-reflectance IR spectroscopy using CO as the probe molecule. The introduction of SO₄ ²⁻ anions increases the electron deficit on platinum particles. This suppresses the formation of bridging CO complexes with the metal, leads to the high-frequency shift of absorption maxima of CO adsorbed in the linear form, and stabilizes positively charged metal species (Pt^δ+ and Pt⁺) during the reduction process. The formation of the positively charged species includes the interaction between the acidic protons and the metal particles yielding [Pt−H]^δ+ adducts. The extent of the influence of the support on the electronic state of the metal increases in the series SO₄/SiO₂<SO₄/Al₂O₃<SO₄/TiO₂<SO₄/ZrO₂ in parallel with an increase in the strength of the acid sites in the system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1099, June, 1998.     

Chemistry of ruthenium in N2P2X2 (X = Cl, Br) coordination sphere: Synthesis, characterization and reactivities

Reaction of 2-(phenylazo)pyridine (pap) with [Ru(PPh₃)₃X₂] (X = Cl, Br) in dichloromethane solution affords [Ru(PPh₃)₂(pap)X₂]. These diamagnetic complexes exhibit a weakdd transition and two intense MLCT transitions in the visible region. In dichloromethane solution they display a one-electron reduction of pap near − 0.90 V vs SCE and a reversible ruthenium(II)-ruthenium(III) oxidation near 0.70 V vs SCE. The [Ru^III(PPh₃)₂(pap)Cl₂]⁺ complex cation, generated by coulometric oxidation of [Ru(PPh₃)₂(pap)Cl₂], shows two intense LMCT transitions in the visible region. It oxidizes N,N-dimethylaniline and [Ru^II(bpy)₂Cl₂] (bpy = 2,2′-bipyridine) to produce N,N,N′,N′-tetramethylbenzidine and [Ru^III(bpy)₂Cl₂]⁺ respectively. Reaction of [Ru(PPh₃)₂(pap)X₂] with Ag⁺ in ethanol produces [Ru(PPh₃)₂(pap)(EtOH)₂]²⁺ which upon further reaction with L (L = pap, bpy, acetylacetonate ion(acac⁻) and oxalate ion (ox²⁻)) gives complexes of type [Ru(PPh₃)₂(pap)(L)]ⁿ⁺ (n = 0, 1, 2). All these diamagnetic complexes show a weakdd transition and several intense MLCT transitions in the visible region. The ruthenium(II)-ruthenium(III) oxidation potential decreases in the order (of L): pap > bpy > acac⁻ > ox²⁻. Reductions of the coordinated pap and bpy are also observed.     

Transport and optical properties of heavily hole-doped semiconductors BaCu2Se2 and BaCu2Te2

Experimental and theoretical studies of the electronic and optical properties of orthorhombic BaCu₂Se₂ and BaCu₂Te₂ are reported. Experimental data include the electrical resistivity, Hall coefficient, Seebeck coefficient, thermal conductivity, and lattice constants for , and optical transmission and diffuse reflectance data at room temperature. Nominally stoichiometric, polycrystalline samples form with hole concentrations inferred from Hall measurements of 2×10¹⁸ and 5×10¹⁹ cm⁻³ near room temperature for the selenide and telluride, respectively. The corresponding mobilities are near 15 cm² V⁻¹ s⁻¹ for both materials. Optical measurements reveal a transition near 1.8 eV in BaCu₂Se₂, while no similar feature was observed for BaCu₂Te₂. First principles calculations indicate both materials are direct or nearly direct gap semiconductors with calculated gaps near 1.0 eV and 1.3 eV for the telluride and selenide, respectively, and predict weak absorption below about 2 eV. Transport properties calculated from the electronic structure are also presented.     

Hydrogenation of nitrate in water over bimetallic Pd-Ag/Al2O3 catalysts

Hydrogenation of nitrate (NO₃ ⁻) in water was studied with 0.8 ×10⁻³–3.2 ×10⁻³ mol/dm³ of reactant in the temperature range of 293–313 K over palladium promoted Ag catalysts. Pd-Ag catalysts with a low ratio of Ag/Pd were characterized by high efficiency in the reduction of nitrates. The degradation of nitrates followed approximately first order decay and the estimated apparent activation energy was about 4 kJ/mol.     

CO2 fixation by [WIVO(S2C2(CN)2)2]2?: functional model for the tungsten-formate dehydrogenase of Clostridium thermoaceticum

(NEt₄)₂[W^IVO(S₂C₂(CN)₂)₂] (1), isolated by reaction of Na₂ WO₄, Na₂S₂C₂(CN)₂ (Na₂mnt) in acidified (pH5.5) aqueous medium in the presence of excess of sodium dithionite and NEt₄Br, reduces CO₂/HCO ₃ ⁻ (pH 7.5) to yield HCOO⁻ and (NEt₄)₂[W^VIO₂(S₂C₂(CN)₂)₂] (2) mimicking tungsten-formate dehydrogenase (W-FDH) activity. (1) reacts with Na₂MoO₄ in acidic medium to produce [Mo^IvO(S₂C₂(CN)₂)₂]²⁻ implicating the displacement of tungsten by molybdenum from the cofactor complex in W-FDH.     

Studies of dehydration kinetics of Li2SO4·H2O by the master plots method

The kinetics of Li₂SO₄·H₂O dehydration in static air atmosphere was studied on the basis of nonisothermal measurements by differential scanning calorimetry. Dehydration data were subjected to an integral composite procedure, which includes an isoconversional method, a master plots method and a model-fitting method. Avrami-Erofeev equation was found to describe all the experimental data in the range of conversion degrees from 0.1 to 0.9. The determined activation energy equals 65.45 kJ·mol⁻¹ with standard deviation ±0.47 kJ·mol⁻¹. The estimated value of parameter m in Avrami-Erofeev equation is 2.15 with standard deviation ±0.11. Also, the obtained pre-exponential factor is 7.79×10⁵ s⁻¹ with standard deviation ±0.55×10⁵ s⁻¹. The results show that the present integral composite procedure gives self-consistent kinetic parameters.     

IR-analysis of H-bonded H2O on the pure TiO2 surface

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.     

Usy supported Pt-bearing SO42?/ZrO2 catalysts promoted by Cr for hydroisomerization of n -heptane

The Pt-bearing SO₄ ²⁻/ZrO₂ catalysts doped with Cr and supported on USY zeolite were prepared by impregnation, and characterized by XRD and IR spectroscopy of pyridine adsorption. Their catalytic activities were evaluated in the hydroisomerization of n-heptane with a fixed-bed atmospheric reactor. The Cr-promoted catalysts exhibited much higher catalytic activity and selectivity for isomerization products than the catalysts without the Cr dopant. Both the conversion and selectivity were discussed in relation with the physicochemical properties of catalysts.     

Encapsulation and Release Characteristics of Carbon Dioxide in α-Cyclodextrin

Encapsulation and release of carbon dioxide (CO₂) into and from α-cyclodextrin (α-CD) was studied. Initial moisture content of α-CD and CO₂ pressure were found to have affected the encapsulation behavior. The increase of CO₂ pressure has constantly accelerated the encapsulation rates and increased the maximum inclusion ratio, whereas the increase of initial moisture content showed no consistent effect. The saturated α-CD solution produced the inclusion complex crystal of similar inclusion ratio to solid α-CD. The release characteristics of inclusion complexes were also monitored at various relative humidities at 25 °C. Predominantly, increase in storage humidity accelerated the release of CO₂. The inclusion complex crystal prepared from saturated α-CD solution showed the most stable release characteristic at all storage humidities investigated. The encapsulation and the release characteristics were analyzed using the first-order reaction equation and the Avrami’s equation respectively, in order to estimate the rate processes of encapsulation and release. The FT-IR spectra of inclusion complexes presented an absorption band at wavenumber around 2338 cm⁻¹, indicating CO₂ molecules resided inside the α-CD cavities in gaseous state rather than being bound to the hydroxyl groups of α-CD. Powder X-ray diffractometry was carried out to investigate the crystal lattice structure of α-CD and inclusion complexes. Scanning electron microscopy was also performed for morphological examination.     

PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h⁺是其...