Determination of O and OH adsorption sites and coverage in situ on Pt electrodes from Pt L(2,3) X-ray absorption spectroscopy

The adsorption of atomic oxygen and hydroxide on a platinum electrode in 0.1 M HClO4 or H2SO4 electrolytes was studied in situ with Pt L(2,3) X-ray absorption spectroscopy (EXAFS and XANES). The Pt L3 edge absorption data, mu, were collected at room temperature in transmission mode on beamline X-11A at the National Synchrotron Light Source using a custom built cell. The Pt electrode was formed of highly dispersed 1.5-3 nm particles supported on carbon. A novel difference procedure (delta mu = mu(O[H]/Pt) - mu(Pt)) utilizing the L3 XANES spectra at different applied voltages was used to isolate the effects of O[H] (O or OH) adsorption in the XANES spectra. The Deltamu results are compared with results obtained from real-space full-multiple scattering calculations utilizing the FEFF8 code on model clusters. The experimental results, when compared with theoretical calculations, allow the adsorption site to be identified. At low coverages OH adsorbs primarily in 1-fold coordinated atop sites. As the coverage increases, O binds in the bridge/fcc sites, and at still higher coverages above 1.05 V RHE, O adsorbs into a higher coordinated n-fold or subsurface site, which is thought to be the result of Pt-O site exchange and oxide formation. These results are similar to those found in the gas phase. Direct specific adsorption of bisulfate anions in H2SO4 is spectroscopically seen in both the EXAFS and XANES data and is seen to impede oxygen adsorption consistent with previous reports.     

FTIR spectroscopic and computational studies on hydrogen adsorption on the zeolite Li-FER

The interaction, at a low temperature, between molecular hydrogen and the zeolite Li-FER was studied by means of variable temperature infrared spectroscopy and theoretical calculations using a periodic DFT model. The adsorbed dihydrogen molecule becomes infrared active, giving a characteristic IR absorption band (H-H stretching) at 4090 cm(-1). Three different Li(+) site types with respect to H(2) adsorption were found in the zeolite, two of which adsorb H(2). Calculations showed a similar interaction energy for these two sites, which was found to agree with the experimentally determined value of standard adsorption enthalpy of DeltaH(0) = -4.1 (+/-0.8) kJ mol(-1). The results are discussed in the broader context of previously reported data for H(2) adsorption on Na-FER and K-FER.     

Electronic properties and charge transfer phenomena in Pt nanoparticles on γ-Al(2)O(3): size, shape, support, and adsorbate effects

This study presents a systematic detailed experimental and theoretical investigation of the electronic properties of size-controlled free and γ-Al(2)O(3)-supported Pt nanoparticles (NPs) and their evolution with decreasing NP size and adsorbate (H(2)) coverage. A combination of in situ X-ray absorption near-edge structure (XANES) and density functional theory (DFT) calculations revealed changes in the electronic characteristics of the NPs due to size, shape, NP-adsorbate (H(2)) and NP-support interactions. A correlation between the NP size, number of surface atoms and coordination of such atoms, and the maximum hydrogen coverage stabilized at a given temperature is established, with H/Pt ratios exceeding the 1?:?1 ratio previously reported for bulk Pt surfaces.     

Hydrogen chemisorption on Al2O3-supported gold catalysts

Hydrogen is dissociatively adsorbed on the gold particles in Au/Al(2)O(3) catalysts, as demonstrated by a combination of in-situ X-ray absorption spectroscopy, chemisorption, and H/D exchange experiments. This chemisorption of hydrogen induces changes in the Au L(3) and L(2) X-ray absorption near-edge structures. The gold atoms on corner and edge positions dissociate the hydrogen, which does not spill over to the face sites. Therefore, the average number of adsorbed hydrogen atoms per surface gold atom increases with decreasing particle size. With temperature, the hydrogen uptake by supported gold increases or remains constant, whereas it decreases for platinum. Furthermore, in H/D exchange experiments, the activity of Au/Al(2)O(3) increases strongly with temperature. Thus, the dissociation and adsorption of hydrogen on gold is activated.     

Photoreversible multiple additions of hydrogen to a highly unsaturated platinum-rhenium cluster complex

The compound Pt3Re2(CO)6(PBut3)3, 1, was obtained from the reaction of Re2(CO)10 with Pt(PBut3)2 in octane solvent at reflux. Compound 1 consists of a trigonal bipyramidal cluster of five metal atoms with three platinum atoms in the trigonal plane and the two rhenium atoms in the apical positions. The metal cluster is formally unsaturated by 10 electrons. Compound 1 sequentially adds 3 equiv of hydrogen at room temperature/1 atm to form the series of compounds Pt3Re2(CO)6(PBut3)3(mu-H)2, 2, Pt3Re2(CO)6(PBut3)3(mu-H)4, 3, and Pt3Re2(CO)6(PBut3)3(mu-H)6, 4. A small but significant kinetic isotope effect was observed, kH/kD = 1.3. The rate of addition of hydrogen is unaffected by the presence of a 20-fold excess of free PBut3 in solutions of 1. Compounds 2-4 each consist of a trigonal bipyramidal cluster of three platinum and two rhenium atoms similar to that of 1. The hydrido ligands in 2-4 bridge the platinum-rhenium bonds and are arranged to give structures having overall C2v symmetry for 2 and 3 and approximate D3h symmetry for 4. Some of the hydrido ligands were expelled from 4 in the form of hydrogen upon exposure of solutions to UV-vis irradiation to yield compound 3 and then 2 in reasonable yields, but the elimination of all hydrido ligands to yield 1 was achieved only under the most forcing UV irradiation and then only with a major loss of the complex due to decomposition. The electronic structures of 1-4 were investigated by DFT calculations. Additional DFT calculations have suggested some mechanisms for the activation of hydrogen at multicenter metal sites without ligand eliminations prior to the hydrogen additions.     

Combined theoretical and FTIR spectroscopic studies on hydrogen adsorption on the zeolites Na-FER and K-FER

The interaction between molecular hydrogen and the alkali-metal-exchanged zeolites Na-FER and K-FER at a low temperature was investigated by combining variable-temperature infrared spectroscopy and theoretical calculations by using a periodic DFT model. The experimentally determined values of standard adsorption enthalpy, DeltaH degrees , were -6.0 (+/-0.8) and -3.5 (+/-0.8) kJ mol(-1) for Na-FER and K-FER, respectively. These results were found to be in agreement with corresponding DeltaH degrees values obtained from calculations on the periodic model. Two types of alkali-metal cation sites in FER were found: channel intersection sites and channel wall sites. Calculations showed a similar interaction energy for both site types, and similar structures of adsorption complexes. Up to two dihydrogen molecules can be physisorbed on the alkali-metal cation located on the intersection of two channels, while only one H2 molecule is physisorbed on the cation at the channel wall site. The adsorption enthalpies of H2 on alkali-metal-exchanged FER are significantly smaller than those found previously for the MFI-type zeolites Na-ZSM-5 and K-ZSM-5, which is likely due to a difference in the alkali-metal cation coordination in the two zeolite frameworks.     

A Theoretical Study on Hydrogen‐Bonded Complex of Proflavine Cation and Water: The Site‐dependent Feature of Hydrogen Bond Strengthening and Weakening

The intermolecular hydrogen‐bonds between proflavine cation (PC) and water molecules are investigated by density functional theory (DFT) and time‐dependent density functional theory (TDDFT) methods. The ground‐state geometry optimizations, electronic excitation energies and corresponding oscillation strengths of the low‐lying electronically excited states for the isolated proflavine cation, the hydrogen‐bonded PC–H2O dimer and PC–(H2O)2 trimer are calculated. Intermolecular hydrogen bonds at the central site of proflavine molecule are found to be stronger than the peripheral site. The hydrogen bond N–H???O for the hydrogen‐bonded dimer are indicated to be weakened in the excited states, since the excitation energy is increased slightly comparing to the monomer. Hydrogen bonds of PC–(H2O)2 trimer with the same type as the dimer are strengthened in the excited state, which is demonstrated by the decrease of the excited energies. Thus, hydrogen bond strengthening and weakening are observed to reveal site dependent feature in proflavine molecule. Furthermore, the hydrogen bond at central site induces the blue‐shift of the absorption spectrum, while the ones at peripheral site induce red‐shift. Hydrogen bonds with the same type at peripheral and central sites of proflavine molecule provide different effects on the photochemical and photophysical properties of proflavine.     

Single molecule observations of the adsorption sites of methyl isocyanide on Pt(111) by low-temperature scanning tunneling microscopy

Scanning tunneling microscopy (STM) has been used to directly investigate the local structure of methyl isocyanide (CNCH3) adsorbed on Pt(111). At low coverages, CNCH3 is preferentially adsorbed at on-top sites, in agreement with earlier deductions based on vibrational spectroscopy. When dosed at low coverages at 50 K, the molecules tend to adsorb near other CNCH3 molecules with preferred distances of a and a, where a = 2.78 A is the lattice constant of Pt. Annealing the surface to 120 K, however, results in a more uniform separation of the molecules. At higher coverages, the CNCH3 molecules are observed to occupy both on-top and two-fold bridge sites. On the basis of STM image analysis, CNCH3 forms an ordered layer of (2 x 3) periodicity at 0.33 ML. Additional details on the structures of CNCH3 adsorbed at the on-top and two-fold bridge sites are provided by density functional theory (DFT) calculations. At a coverage that saturates the first layer (0.33 ML), the occupation ratio for the on-top and two-fold bridge bonded CNCH3 is 1:1, which is consistent with the results obtained from the combined use of experimental reflection absorption infrared spectroscopy (RAIRS) data and DFT calculations.     

Ab initio multireference configuration-interaction study of hydrogen molecule activation by Cs-promoted Pt clusters

The adsorption of the H2 molecule on CsnPt(5-n) bcc (111) clusters for Cs/Pt rates of 20%, 40%, and 80% is studied using ab initio multiconfigurational self-consistent field plus multireference configuration-interaction variational and perturbative calculations. The H2 interaction with the clusters is studied in ground and excited states with geometry optimization, where the hydrogen adsorption takes place by a Pt atom. These calculations are compared with those of H2 adsorption on Pt4. The most stable configurations of Cs/Pt4 and Cs2Pt3 clusters (Cs/Pt rates of 20% and 40%) are a doublet and a closed-shell singlet, respectively. Both clusters capture and activate the hydrogen molecule and their behaviors resemble Pt4. The H2 capture distances are, respectively, similar and smaller than Pt4 capture distances, while the H-H bond dissociation distances are similar and bigger than those of Pt4; however, none of them presents activation barriers. The most stable Cs4Pt cluster (Cs/Pt rate of 80%) is also a closed-shell singlet; it also captures and activates the hydrogen molecule and shows a different behavior as compared with Cs/Pt4, Cs2Pt3, and Pt4 clusters. The capture distance is quite smaller and is obtained after surmounting an activation barrier. For all clusters studied here, no hydrogen absorption was observed, only the adsorption of H2.     

Heterolytic splitting of H2 and CH4 on gamma-alumina as a structural probe for defect sites

A combined use of DFT periodic calculations and spectroscopic studies (IR and solid-state NMR) shows that a gamma-alumina treated at 500 degrees C under high vacuum contains surface defects, which are very reactive toward H2 or CH4. The reaction of H2 on defect sites occurs at low temperature (ca. 25 degrees C) on two types of Al atoms of low coordination numbers, AlIII or AlIV, to give AlIV-H and AlV-H, respectively. The amount of defects as titrated by H2 at 25 and 150 degrees C is 0.043 and 0.069 site/nm2, respectively, in comparison with 4 OH/nm2). In contrast, CH4 reacts selectively at 100-150 degrees C on the most reactive AlIII sites to form the corresponding AlIV-CH3 (0.030 site/nm2). The difference of reactivity of H2 and CH4 is fully consistent with calculations (reaction and activation energy, DeltaE and DeltaE++).     

CO organization at ambient pressure on stepped Pt surfaces: first principles modeling accelerated by neural networks

Step and kink sites at Pt surfaces have crucial importance in catalysis. We employ a high dimensional neural network potential (HDNNP) trained using first-principles calculations to determine the adsorption structure of CO under ambient conditions (T = 300 K and P = 1 atm) on these surfaces. To thoroughly explore the potential energy surface (PES), we use a modified basin hopping method. We utilize the explored PES to identify the adsorbate structures and show that under the considered conditions several low free energy structures exist. Under the considered temperature and pressure conditions, the step edge (or kink) is totally occupied by on-top CO molecules. We show that the step structure and the structure of CO molecules on the step dictate the arrangement of CO molecules on the lower terrace. On surfaces with (111) steps, like Pt(553), CO forms quasi-hexagonal structures on the terrace with the top site preferred, with on average two top site CO for one multiply bonded CO, while in contrast surfaces with (100) steps, like Pt(557), present a majority of multiply bonded CO on their terrace. Short terraced surfaces, like Pt(643), with square (100) steps that are broken by kink sites constrain the CO arrangement parallel to the step edge. Overall, this effort provides detailed analysis on the influence of the step edge structure, kink sites, and terrace width on the organization of CO molecules on non-reconstructed stepped surfaces, yielding initial structures for understanding restructuring events driven by CO at high coverages and ambient pressure.

A neural network potential trained using first-principles calculations enables to understand the adsorption configurations of carbon monoxide on stepped Pt surfaces at ambient pressure.     

Dual Graphitic‐N Doping in a Six‐Membered C‐Ring of Graphene‐Analogous Particles Enables an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Graphene‐based materials still exhibit poor electrocatalytic activities for the hydrogen evolution reaction (HER) although they are considered to be the most promising electrocatalysts. We fabricated a graphene‐analogous material displaying exceptional activity towards the HER under acidic conditions with an overpotential (57 mV at 10 mA cm^?2) and Tafel slope (44.6 mV dec^?1) superior to previously reported graphene‐based materials, and even comparable to the state‐of‐the art Pt/C catalyst. X‐ray absorption near‐edge structure (XANES) and solid‐state NMR studies reveal that the distinct feature of its structure is dual graphitic‐N doping in a six‐membered carbon ring. Density functional theory (DFT) calculations show that the unique doped structure is beneficial for the activation of C?H bonds and to make the carbon atom bonded to two graphitic N atoms an active site for the HER.     

A small paramagnetic platinum cluster in an NaY zeolite: characterization and hydrogen adsorption and desorption

A well-defined cluster containing 12 equivalent platinum atoms was prepared by ion exchange of an NaY zeolite, followed by hydrogen reduction. It was characterized by electron paramagnetic resonance (EPR) spectroscopy, hyperfine sublevel correlation (HYSCORE), and theoretical calculations. Combing the results of the experiments with density functional calculations, the likely structure of this cluster is icosahedral Pt13Hm, possibly with a low positive charge. The adsorbed H/D on the Pt cluster surface can be exchanged reversibly at room temperature. From H/D desorption experiments, an H2 binding energy of 1.36 eV is derived, in reasonable agreement with the calculated value but clearly larger than that for a (111) Pt single-crystal surface, revealing a finite size effect. While the hydrogen-covered cluster should clearly be regarded as a molecule, it is conceivable that the cluster adopts metallic character upon hydrogen desorption. It is likely that up to m=30 H atoms bind to this cluster with 12 surface atoms, which has important implications for the determination of the dispersion of small Pt catalyst particles by hydrogen chemisorption. Calculations as well as experiments give evidence of an interesting magnetic behavior with high-spin states playing a prominent role. There are strong indications that a reservoir of EPR silent but structurally similar clusters exists which can partly be converted to EPR visible species by H/D exchange or by gas adsorption.     

氢原子在Be(0001)表面吸附的密度泛函理论研究

采用第一性原理的密度泛函理论研究单个氢原子和多个氢原子在Be(0001)表面吸附性质.给出了氢吸附Be(0001)薄膜表面的原子结构、吸附能、饱和度、功函数、偶极修正等特性参数.同时也讨论了相关吸附性质与氢原子覆盖度(0.06-1.33ML)的关系.计算结果表明:氢原子的吸附位置与覆盖度之间有强烈的依赖关系,覆盖度低于0.67ML时,氢原子能量上易于占据fcc或hcp的中空位置;覆盖度为0.78ML时,中空位与桥位为氢原子的最佳吸附位;覆盖度在0.89到1.00ML时,桥位是氢原子吸附能量最有利的位置;以上覆盖度中Be(0001)表面最外层铍原子的结构均没有发生明显变化.当覆盖度为1.11-1.33ML,高覆盖度下Be(0001)表面的最外层铍原子部分发生膨胀,近邻氢原子渗入到铍表面次层,氢原子易于占据在hcp和桥位.吸附结构中的氢原子比氢分子中的原子稳定.当覆盖度大1.33ML时,计算结果没有发现相对于氢分子更稳定的吸氢结构.同时从分析偶极修正和氢原子吸附垂直高度随覆盖度的变化关系判断氢覆盖度为1.33ML时,在Be(0001)表面吸附达到饱和.     

Bonding mechanism and atomic geometry of an ordered hydroxyl overlayer on Pt(111)

Exposing water to a (2 x 2)-O precovered Pt(111) surface at 100 K and subsequently annealing at 155 K led to the formation of a well-ordered (square root 3 x square root 3)R30 degrees overlayer. The structure of this overlayer is determined by DFT and full dynamical LEED calculations. There are two O containing groups per (square root 3 x square root 3)R30 degrees unit cell and both occupy near on-top positions with a Pt-O bond length of (2.11 +/- 0.04) A. DFT calculations determined the hydrogen positions of the OH species and clearly indicate hydrogen bonds between the neighboring adsorbed OH groups whose interaction is mainly of electrostatic nature. A theoretical comparison with H(2)O shows the hybridization of OH on Pt(111) to be sp(3).     

Study of Hydrogen Adsorption on Pt/WO3-ZrO2 through Pt Sites

The rate determining step and the energy barrier involved in hydrogen adsorption on Pt/WO_3- ZrO_2 were studied based on the assumption that the hydrogen adsorption occurs only through Pt sites. The rate of hydrogen adsorption on Pt/WO_3-ZrO_2 was measured in the adsorption temperature range of 323-573 K and an initial hydrogen pressure of 50 Torr.The rates of hydrogen uptake were very high for the initial few minutes and the adsorption continued for more than 5 h below 523 K.The hydrogen uptake far exceeded the H/Pt ratio of unity for all adsorption temperatures,indicating that the adsorption of hydrogen involved the dissociative adsorption of hydrogen on Pt sites to form hydrogen atoms,the spillover of hydrogen atoms onto the surface of the WO_3-ZrO2 catalyst,the diffusion of spiltover hydrogen atom over the surface of the WO_3-ZrO_2 catalyst,and the formation of protonic acid site originated from hydrogen atom by releasing an electron in which the electron may react with a second hydrogen atom to form a hydride near the Lewis acid site.The rate determining step was the spillover with the activation energy of 12.3 kJ/mol.The rate of hydrogen adsorption cannot be expressed by the rate equation based on the assumption that the rate determining step is the surface diffusion.The activity of Pt/WO_3-ZrO_2 was examined on n-heptane isomerization in which the increase of hydrogen partial pressure provided positive-effect on the conversion of n-heptane and negative-effect on the selectivity towards iso-heptane.     

A Cu/Pt near-surface alloy for water-gas shift catalysis

The primary route to hydrogen production from fossil fuels involves the water-gas shift (WGS) reaction, and an improvement in the efficiency of WGS catalysts could therefore lead to a major leap forward in the realization of hydrogen economy. On the basis of a combination of high-resolution scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations, we suggest the existence of a new thermodynamically stable Cu/Pt near-surface alloy (NSA). Temperature-programmed desorption and DFT reveal that this Cu/Pt NSA binds CO significantly more weakly than does Pt alone, thereby implying a considerable reduction in the potential for CO poisoning of the Cu/Pt NSA surface as compared to that of pure Pt. In addition, DFT calculations show that this Cu/Pt NSA is able to activate H2O easily, which is the rate-determining step for the WGS on several metal surfaces, and, at the same time, to bind the products of that reaction and formate intermediates rather weakly, thus avoiding possible poisoning of the catalyst surface. The Cu/Pt NSA is thus a promising candidate for an improved WGS catalyst.     

Electroreduction activity of hydrogen peroxide on Pt and Au electrodes

Hydrogen peroxide electroreduction on both catalytically active Pt and inactive Au surfaces are studied by using both surface-enhanced Raman spectroscopy (SERS) and density functional theory (DFT) calculations. SERS measurements on Pt show the presence of Pt-OH at negative potentials, which suggests that hydroxide is formed as an intermediate during the electroreduction process. Additionally, the O-O stretch mode of H(2)O(2) is observed on Pt, which shifts to lower energy as potential is swept negatively, indicating that the O-O bond is elongated. For comparison, there is no variation in the energy of the same O-O mode on Au surfaces, and there is no observation of Au-OH. DFT calculations show that H(2)O(2) adsorption on Pt(110) results in the dissociation of O-O bond and the formation of Pt-OH bond. On Au, O-O bond elongation is calculated to occur only on the (110) face. However, the magnitude of the elongation is much smaller than that found on Pt(110).     

Palladium complexes of a phosphorus ylide with two stabilizing groups: synthesis, structure, and DFT study of the bonding modes

The phosphorus ylide ligand [Ph3P=C(CO2Me)C(=NPh)CO2Me] (L1) has been prepared and fully characterized by spectroscopic, crystallographic, and density functional theory (DFT) methods (B3LYP level). The reactivity of L1 toward several cationic Pd(II) and Pt(II) precursors, with two vacant coordination sites, has been studied. The reaction of [M(C/\X)(THF)2]ClO4 with L1 (1:1 molar ratio) gives [M(C/\X)(L1)]ClO4 [M = Pd, C/\X = C6H4CH2NMe2 (1), S-C6H4C(H)MeNMe2 (2), CH2-8-C9H6N (3), C6H4-2-NC5H4 (4), o-CH2C6H4P(o-tol)2 (6), eta3-C3H5 (7); M = Pt, C/\X = o-CH2C6H4P(o-tol)2 (5); M(C/\X) = Pd(C6F5)(SC4H8) (8), PdCl2 (9)]. In complexes 1-9, the ligand L1 bonds systematically to the metal center through the iminic N and the carbonyl O of the stabilizing CO2Me group, as is evident from the NMR data and from the X-ray structure of 3. Ligand L1 can also be orthopalladated by reaction with Pd(OAc)2 and LiCl, giving the dinuclear derivative [Pd(mu-Cl)(C6H4-2-PPh2=C(CO2Me)C(CO2Me)=NPh)]2 (10). The X-ray crystal structure of 10 is also reported. In none of the prepared complexes 1-10 was the C(alpha) atom found to be bonded to the metal center. DFT calculations and Bader analysis were performed on ylide L1 and complex 9 and its congeners in order to assess the preference of the six-membered N,O metallacycle over the four-membered C,N and five-membered C,O rings. The presence of two stabilizing groups at the ylidic C causes a reduction of its bonding capabilities. The increasing strength of the Pd-C, Pd-O, and Pd-N bonds along with other subtle effects are responsible for the relative stabilities of the different bonding modes.     

Syntheses, electronic structures, and EPR/UV-vis-NIR spectroelectrochemistry of nickel(II), copper(II), and zinc(II) complexes with a tetradentate ligand based on S-methylisothiosemicarbazide

Template condensation of 3,5-di-tert-butyl-2-hydroxybenzaldehyde S-methylisothiosemicarbazone with pentane-2,4-dione and triethyl orthoformate at elevated temperatures resulted in metal complexes of the type M(II)L, where M = Ni and Cu and H(2)L = a novel tetradentate ligand. These complexes are relevant to the active site of the copper enzymes galactose oxidase and glyoxal oxidase. Demetalation of Ni(II)L with gaseous hydrogen chloride in chloroform afforded the metal-free ligand H(2)L. Then by the reaction of H(2)L with Zn(CH(3)COO)(2)·2H(2)O in a 1:1 molar ratio in 1:2 chloroform/methanol, the complex Zn(II)L(CH(3)OH) was prepared. The three metal complexes and the prepared ligand were characterized by spectroscopic methods (IR, UV-vis, and NMR spectroscopy), X-ray crystallography, and DFT calculations. Electrochemically generated one-electron oxidized metal complexes [NiL](+), [CuL](+), and [ZnL(CH(3)OH)](+) and the metal-free ligand cation radical [H(2)L](+?) were studied by EPR/UV-vis-NIR and DFT calculations. These studies demonstrated the interaction between the metal ion and the phenoxyl radical.