Thermal behaviour, compatibility study and decomposition kinetics of glimepiride under isothermal and non-isothermal conditions

In the present work, the thermal decomposition of glimepiride (sulfonylurea hypoglycemic agent) was studied using differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry (TG/DTG). Isothermal and non-isothermal methods were employed to determine kinetic data of decomposition process. The physical chemical properties and compatibilities of several commonly used pharmaceutical excipients (glycolate starch, microcrystalline cellulose, stearate, lactose and Plasdone®) with glimepiride were evaluated using thermoanalytical methods. The 1:1 physical mixtures of these excipients with glimepiride showed physical interaction of the drug with Mg stearate, lactose and Plasdone®. On the other hand, IR results did not evidence any chemical modifications. From isothermal experiments, activation energy (E _a) can be obtained from slope of lnt vs. 1/T at a constant conversion level. The average value of this energy was 123 kJ mol^–1. For non-isothermal method E _a can be obtained from plot of logarithms of heating rates, as a function of inverse of temperature, resulting a value of 157 and 150 kJ mol^–1, respectively, in air and N₂ atmosphere, from the first stage of thermal decomposition.     

Thermal behavior study and decomposition kinetics of salbutamol under isothermal and non-isothermal conditions

The thermal decomposition of salbutamol (β₂ — selective adrenoreceptor) was studied using differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry (TG/DTG). It was observed that the commercial sample showed a different thermal profile than the standard sample caused by the presence of excipients. These compounds increase the thermal stability of the drug. Moreover, higher activation energy was calculated for the pharmaceutical sample, which was estimated by isothermal and non-isothermal methods for the first stage of the thermal decomposition process. For isothermal experiments the average values were E _act=130 kJ mol⁻¹ (for standard sample) and E _act=252 kJ mol⁻¹ (for pharmaceutical sample) in a dynamic nitrogen atmosphere (50 mL min⁻¹). For non-isothermal method, activation energy was obtained from the plot of log heating rates vs. 1/T in dynamic air atmosphere (50 mL min⁻¹). The calculated values were E _act=134 kJ mol⁻¹ (for standard sample) and E _act=139 kJ mol⁻¹ (for pharmaceutical sample).     

Thermal studies on polymorphic structures of tibolone

Tibolone polymorphic forms I (monoclinic) and II (triclinic) have been prepared by recrystallization from acetone and toluene, respectively, and characterized by different techniques sensitive to changes in solid state, such as polarized light microscopy, X-ray powder diffractometry, thermal analysis (TG/DTG/DSC), and vibrational spectroscopy (FTIR and Raman microscopy). The nonisothermal decomposition kinetics of the obtained polymorphs were studied using thermogravimetry. The activation energies were calculated through the Ozawa’s method for the first step of decomposition, the triclinic form showed a lower E _a (91 kJ mol⁻¹) than the monoclinic one (95 kJ mol⁻¹). Furthermore, Raman microscopy and DSC at low heating rates were used to identify and follow the thermal decomposition of the triclinic form, showing the existence of three thermal events before the first mass loss.     

Vapor pressure, kinetics and enthalpy of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II)

The kinetics of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II), [Cu(tmhd)₂] was studied by non-isothermal and isothermal thermogravimetric (TG) methods. The non-isothermal sublimation activation energy values determined following the procedures of Friedman, Kissinger, and Flynn–Wall methods yielded 93 ± 5, 67 ± 2, and 73 ± 4 kJ mol⁻¹, respectively and the isothermal sublimation activation energy was found to be 97 ± 3 kJ mol⁻¹ over the temperature range of 375–435 K. The dynamic TG run proved the complex to be completely volatile and the equilibrium vapor pressure (p_e)_T of the complex over the temperature range of 375–435 K determined by a TG-based transpiration technique, yielded a value of 96 ± 2 kJ mol⁻¹ for its standard enthalpy of sublimation (Δ_subH°).     

Compatibility study between ibuprofen and excipients in their physical mixtures

The thermal techniques of analysis were used to assess the compatibility between ibuprofen (IB) and some excipients used in the development of extended released formulations. This study is a part of a systematic study undertaken to find and optimizes a general method of detecting the drug–excipient interactions, with the aim of predicting rapidly and assuring the long-term stability of pharmaceutical product and speeding up its marketing. The thermal properties of IB and its physical association as binary mixtures with some common excipients were evaluated by thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry. FT-IR spectroscopy and X-ray powder diffraction (XRPD) were used as complementary techniques to adequately implement and assist in interpretation of the thermal results. Based on their frequent use in preformulations nine different excipients: starch; microcrystalline cellulose (PH 101 and PH 102); colloidal silicon dioxide; lactose (monohydrate and anhydre); polyvinylpyrrolidone; magnesium stearate and talc were blended with IB. The samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). The TG/DSC curves of the IB have shown a single stage of mass loss between 175 and 290 °C, respectively, an endothermic peak at 78.5 °C, which corresponds to the melting (literature T _m = 75–78 °C).     

Thermal decomposition kinetics and compatibility studies of primaquine under isothermal and non-isothermal conditions

Primaquine (PQ) is the drug of choice for the radical cure of Plasmodium vivax malaria, and currently being administered in solid dosage form. In this study, the compatibility studies were carried out using differential scanning calorimetry (DSC), thermogravimetry (TG), and fourier transformed infrared (FT-IR). Non-isothermal and isothermal methods were employed to investigate kinetic parameters under nitrogen and air atmospheres using TG. The DSC investigations obtained by physical mixtures showed slight alterations in the melting temperatures of PQ with some excipients. The FT-IR confirmed the possible interactions obtained by DSC for the physical mixtures with PQ and lactose, magnesium stearate and mannitol. The results showed that the thermal decomposition followed a zero order kinetic in both atmospheres in non-isothermal method. The activation energy in both methods using nitrogen atmosphere was similar, and in air atmosphere the activation energy decreased.     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

The effect of zinc stearate on thermal degradation of paraffin wax

In this research, the effects of zinc stearate addition on paraffin wax degradation were investigated by differential scanning calorimetry (DSC) and thermogravimetry (TG). The apparent activation energies of wax decomposition in nitrogen and air atmospheres were determined as 76 and 37 kJ mol⁻¹, respectively applying Kissinger method to TG data. The degradation rate constants of paraffin containing zinc stearate (0.1–0.5%) were found to be almost two times greater than that of paraffin only in air atmosphere. However, zinc stearate did not affect the rate constants in nitrogen significantly.     

Study of oxidation properties and decomposition kinetics of three-dimensional (3-D) braided carbon fiber

The XRD, SEM, isothermal oxidation-weight loss and non-isothermal thermogravimetry (TG)-differential thermogravimetry (DTG) were used to study the oxidation properties and oxidation decomposition kinetics of three-dimensional (3-D) braided carbon fiber (abbreviated as fiber). The results showed that the non-isothermal oxidation process of fiber exhibited self-catalytic characteristic. The kinetic parameters and oxidation mechanism of fiber were studied through analyzing the TG and DTG data by differential and integral methods. The oxidation mechanism was random nucleation, the kinetic parameters were: lg A=10.299 min⁻¹; E_a=156.29 kJ mol⁻¹.     

Two novel algorithms for the thermogravimetric assessment of polymer degradation under non-isothermal conditions

Two novel algorithms are presented for processing thermogravimetric (TG) data obtained during the degradation of a polymer in a single step mechanism under non-isothermal conditions. The first algorithm assesses three characteristics computed from the TG profile against a theoretical data set, and identifies likely kinetic models to fit the experimental data. The second algorithm provides an iterative arithmetic method to extract the apparent activation energy, E_a, and Arrhenius A-factor, A, from TG data without simplifying assumptions. The algorithms are validated using model data and applied to data for the non-isothermal degradation of poly(ethylene adipate), poly(lactic acid) (PLA) and a food packaging PLA composite formulation containing kenaf, a natural fibre. The analysis of poly(ethylene adipate) produced E_a = 137 kJ mol⁻¹ and log₁₀A = 8.71 (first-order kinetic model). The kenaf fibre destabilizes PLA, lowering its E_a from 190 kJ mol⁻¹ to 150 kJ mol⁻¹ (contracting volume model).     

Thermal analysis of dehydroxylation of Algerian kaolinite

Thermal analysis techniques remain important tools amongst the large variety of methods used for analysis of the dehydroxylation of kaolinite. In the present study, the kinetics of dehydroxylation of Algerian kaolinite, wet ball milled for 5 h followed by attrition milling for 1 h, was investigated using differential thermal analysis (DTA) and thermogravimetry (TG). Experiments were carried out between room temperature and 1350 °C at heating rates of 5, 10 and 20 °C min⁻¹. The temperature of dehydroxylation was found to be around 509 °C. The activation energy and frequency parameter evaluated through isothermal DTA treatment were 174.69 kJ mol⁻¹ and 2.68 × 10⁹ s⁻¹, respectively. The activation energies evaluated through non-isothermal DTA and TG treatments were 177.32 and 177.75 kJ mol⁻¹, respectively. Growth morphology parameters n and m were found to be almost equal to 1.5.     

The oxidation mechanisms of Cu54Ni45Mn1 (Constantan) tapes: Kinetic analysis

The kinetic parameters, namely the triplet activation energy E_A, model function f(α) or g(α) and pre-exponential factor A of the oxidation of Constantan tapes in 1 atm of oxygen have been determined from both isothermal and non-isothermal thermogravimetry. For isothermal experiments, with temperatures ranging from 650 °C to 900 °C, the results from direct conversion of the weight increase as a function of the time and curve fitting, are compared with the isoconversion method. For the non-isothermal experiments, with heating rates from 1 °C/min to 20 °C/min, comparison is made between the Friedman differential method and the integral methods of Kissinger, Ozawa and Li and Tang. All methods give apparent activation energies with relative standard deviations as low as 3%. The results converge to the identification of three stages in the oxidation behaviour. A parabolic law for reaction extents α below 15% with E_A = 246 ± 7 kJ mol⁻¹, ln A = 14.3, is followed by two linear stages with E_A = 244 ± 4 kJ mol⁻¹ and ln A = 15.3 for 0.18 < α < 0.35 and E_A = 228 ± 15 kJ mol⁻¹, ln A ≈ 13 for α > 45%, respectively.     

Kinetics of non-isothermal oxidation of anhydrous milk fat rich in conjugated linoleic acid using differential scanning calorimetry

Anhydrous milk fat (AMF) with low, medium, and high content of conjugated linoleic acid (L-, M-, and H-CLA) was oxidized using differential scanning calorimetry (DSC) at five different heating rates (3, 6, 9, 12, and 15 °C min⁻¹) in a temperature range of 100–350 °C. For the first time, kinetic oxidation parameters of AMF rich in CLA are reported. DSC spectra were analyzed to locate the start temperature (T _s), onset temperature (T _on), and maximum heat flow temperature (T _p). These reference points were further used to calculate the effective activation energy (E) and pre-exponential factor (z) using the Ozawa-Flynn-Wall method. The T _s shifts to lower values as the CLA content increases, while the T _on and T _p were less affected by the CLA content. The calculated kinetic parameters not only depend on the ratio between unsaturated to saturated fatty acids but also on the selected reference points. For the L-CLA sample, the E values calculated from T _s, T _on, and T _p were 146.51, 114.11, and 121.31 kJ mol⁻¹, respectively. For the M-CLA sample, the E values calculated were 112.42, 104.06, and 87.41 kJ mol⁻¹, respectively. For the H-CLA sample, the E values calculated were 87.60, 82.42, and 73.64 kJ mol⁻¹, respectively. These variations in E values do not have any physical background according to the compensation effect. In non-isothermal oxidation of AMF, several reactions with different kinetic parameters simultaneously take place and DSC only detects those reactions that have the highest exothermal effect. The T _s is the most consistent reference point to calculate E and z values.     

Preparation and characterization of nitrogen-rich bis-1-methylimidazole1H,1′H-5,5′-bistetrazole-1,1′-diolate energetic salt

A new nitrogen-rich energetic salt of bis-1-methylimidazole 1H,1′H-5,5′-bistetrazole-1,1′-diolate salt, (1-M)₂BTO, was synthesized and characterized (FT-IR, ¹H NMR, ¹³C NMR, elemental analysis, and X-ray single-crystal diffraction). Results indicated that (1-M)₂BTO crystallizes in the triclinic space group P-1. The thermal decomposition behavior of (1-M)₂BTO was determined by differential scanning calorimetry (DSC) and thermogravimetric tandem infrared spectroscopy. The decomposition peak temperature of (1-M)₂BTO was 530 K, which suggested that the salt is strong heat resistance. The apparent activation energies were 130.56 kJ mol^?1 (Kissinger’s method) and 132.50 kJ mol^?1 (Ozawa’s method), respectively. The enthalpy of formation for the salt was calculated as 917.3 kJ mol^?1. The detonation velocity and detonation pressure of (1-M)₂BTO were 7448 m s^?1 and 20.7 GPa, respectively, using the Kamlet-Jacobs equation. Furthermore, the sensitivity test results showed that its impact sensitivity is greater than 50 J and friction sensitivity is 180 N, indicating that it has a lower sensitivity.

     

Phase equilibria in binary subsystems of urea–biuret–water system

Joint results of the differential scanning calorimetry (DSC) and thermogravimetry (TG) experiments were the basis for the fusion enthalpy and temperature determination of the biuret (NH₂CO)₂NH (synthesis by-product of the urea fertilizer (NH₂)₂CO). Recommended values are Δ_m H = (26.1 ± 0.5) kJ mol⁻¹, T _m = (473.8 ± 0.4) K. The DSC method allowed for the phase diagrams of “water–biuret,” “water–urea,” “urea–biuret” binary systems to be studied; as a result, liquidus and solidus curves were precisely defined. Stoichiometry and decomposition temperature of the biuret hydrate identified, composition of the compound in “urea–biuret” system was suggested.     

Thermal behavior of jerivá oil (Syagrus romanzoffiana)

The jerivá is a well-known fruit, which belongs to the Arecaceae family, Syagrus romanzoffiana species frequently found in Brazil. Extraction of the jerivá oil was carried out, and the fatty acid profile of this oil indicates the linoleic and oleic acid presence, around 29.35 and 28.89%, respectively. Thermogravimetry (TG), derivative thermogravimetry (DTG), and differential scanning calorimetry (DSC) were used to characterize this oil. Additionally, this oil was evaluated by DSC from 25 to −80 °C, and the crystallization behavior was verified. Details concerning the thermal behavior as well as data of kinetic parameters of these stages have been described here. The obtained data were evaluated, and the values were plotted in activation energy (E _a/kJ mol⁻¹) in function of the conversion degree (α).     

Investigation of isothermal and dynamic cure kinetics of epoxy resin/nadic methyl anhydride/dicyandiamide by differential scanning calorimetry (DSC)

Isothermal and dynamic differential scanning calorimetry (DSC) was exploited to study the curing behavior of diglycidyl ether bisphenol-A epoxy resin with various combining ratios of dicyandiamide (DICY) and nadic methyl anhydride (NMA). Curves of prepared samples indicated that the enthalpy of the reaction decreased with increasing the molar ratios (NMA/DICY) up to 40% after which an exothermic peak peculiar to the effect of anhydride appeared at a higher temperature. The curing behavior examination of the samples containing the aforementioned molar ratio of NMA/DICY (= 40%) was carried out using isothermal condition at different temperatures (130–145 °C) and dynamic condition DSC at various heating rates (2.5–20 °C min⁻¹). Under the isothermal condition, by constructing a master curve, the values of activation energy (E_a) and pre-exponential factor (A) were calculated 89.3 kJ mol⁻¹ and 1.2 × 10⁺⁹ s⁻¹, respectively. The activation energy of the curing reactions in a dynamic mode was obtained 85.32 kJ mol⁻¹ and 88.02 kJ mol⁻¹ using Kissinger and Ozawa methods, respectively. Likewise, pre-exponential factors were also calculated 3.35 × 10⁺⁸ and 7.4 × 10 ⁺⁸ s⁻¹, respectively. The overall order of reaction for both conditions was found to be a value around 3.

     

Glass transition and crystallization study of chalcogenide Se<Subscript>70</Subscript>Te<Subscript>15</Subscript>In<Subscript>15</Subscript> glass

Differential scanning calorimetry data at different heating rates (5, 10, 15 and 20 °C min⁻¹) of Se₇₀Te₁₅In₁₅ chalcogenide glass is reported and discussed. The crystallization mechanism is explained in terms of recent analyses developed for use under non-isothermal conditions. The value of Avrami exponent (n) indicates that the glassy Se₇₀Te₁₅In₁₅ alloy has three-dimensional growth. The average values of the activation energy for glass transition, E _g, and crystallization process, E _c, are (154.16 ± 4.1) kJ mol⁻¹ and (98.81 ± 18.1) kJ mol⁻¹, respectively. The ease of glass formation has also been studied. The reduced glass transition temperature (T _rg), Hruby’ parameter (K _gl) and fragility index (F _i) indicate that the prepared glass is obtained from a strong glass forming liquid.     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.