Hydrogen sorption characteristics of magnesium-based composites with addition of Mg<Subscript>2</Subscript>Ni<Subscript>0.7</Subscript>Co<Subscript>0.3</Subscript> and graphite

Magnesium-based composites of 75 wt% Mg — (10, 15, 20) wt% Mg2Ni0.7Co0.3 — (15, 10, 5) wt% C mechanically activated for 30 min under argon in a planetary mill, were obtained. Their absorption-desorption characteristics were investigated under a pressure P = 1 MPa and temperatures of 623, 573, 473, 423 and 373 K. Desorption was carried out at 623 K and 573 K and a pressure of 0.15 MPa. All the three composites showed improved hydriding kinetics as compared to pure magnesium. However, the desorption temperature was somewhat higher than needed for practical application.      

Ionic liquids - deanol derivatives as the Diels-Alder reaction solvents

The Diels-Alder reaction between cyclopentadiene and dienophiles in deanol derivatives containing bis(trifluoromethylsulfonyl)imide anion as media have been studied. The effect of the substituents attached to the cation on the endo:exo selectivity as well as the reaction yield have been evaluated in the absence and presence of Lewis acid catalyst - Y(OTf)₃. Catalytic activity of metal triflates and the recycling of chosen catalytic systems have also been investigated      

Preparation and examination of multilayer graphene nanosheets by exfoliation of graphite in high efficient attritor mill

Graphene multilayers have been prepared by mechanical method based on milling graphite in high efficient attritor mill. The results showed that the best dispersion media is ethanol, and 10 hours of intensive milling proved to be the most efficient way to separate the graphite layers as it was shown by scanning electron microscopy and X-ray diffraction measurements.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.      

Asymmetric transfer hydrogenation of prochiral ketones catalyzed by aminosulfonamide-ruthenium complexes in ionic liquid

Chiral aminosulfonamides containing imidazolium group were used as ligands for the ruthenium(II)-catalyzed asymmetric transfer hydrogenation of prochiral ketones in ionic liquid, affording good to excellent conversions and enantiomeric excesses. The catalytic system could be easily recovered and reused several times.      

Nano-hydroxyapatite preparation from biogenic raw materials

Hydroxyapatite (HAp) was successfully produced from recycled eggshell, seashell and phosphoric acid. The phases obtained depended on the ratio of calcined eggshell/ seashell to phosphoric acid, the calcination temperature and the mechanochemical activation method (ball milling or attrition milling). The HAp structures were characterized by X-ray diffraction, scanning electron microsopy and infrared spectroscopy. Attrition milling was more effective than ball milling, yielding nanosize, homogenous and pure Hap.      

Kinetics of base hydrolysis of α-amino acid esters catalyzed by palladium(II) piperazine complex

The kinetics of base hydrolysis of glycine, histidine, and methionine methyl esters in the presence of [Pd(pip)(H₂O)₂]²⁺ complex, where pip is piperazine, is studied in aqueous solutions, at T = 25°C, and I = 0.1 mol dm⁻³. The rate of ester hydrolysis for glycine methyl ester is studied at different temperature and dioxane/water solutions of different compositions. The kinetic data are fit under the assumption that the hydrolysis proceeds in one step. The activation parameters for the base hydrolysis of the complexes are evaluated      

Efficient and solvent-free synthesis of 1-amidoalkyl-2-naphthols using <Emphasis Type="Italic">N,N,N’,N’</Emphasis>-tetrabromobenzene-1,3-disulfonamide

N,N,N,’N’-Tetrabromobenzene-1,3-disulfonamide [TBBDA] is found to be a reusable catalyst for efficient synthesis of various amidoalkyl naphthols from β-naphthol, aromatic aldehydes and urea in good to high yields under solvent-free conditions.      

Silver nanoparticles: synthesis through chemical methods in solution and biomedical applications

Chemical methods provide an easy way to synthesize silver nanoparticles (Ag NPs) in solution. These metal nanoparticles have a great potential for biomedical applications as an antibacterial, antifungal, and antiviral agent or in wound healing. The adjustment of the parameters involved in these reactions permits a precise control over the size, shape, monodispersity, and the surfaces of the nanoparticles. These nanoparticles are being used in the design of new hybrid organic-inorganic or inorganic nanomaterials for biomedical applications.      

The bifunctionality of silica gel modified with Congo red

Silica gel was chemically modified with Congo red and characterized by Fourier transform infrared spectroscopy, elemental and thermogravimetric analysis. The pH-sensitive immobilized Congo red retains the same properties as its solution counterpart and could be applied as solid indicator. The functionalized silica gel was also employed to extract different cations from water solutions. The concentration of cations extracted was determined by inductively coupled plasma optical emission spectrometry. The solid support is able to selectively extract silver and copper from water solutions and retains its properties after treatment with different organic and inorganic solvents.      

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides to N-alkyl-2-(2-hydroxyphenyl)-2-imino-acetamides

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides is reported. N-alkyl-2-(2-hydroxyphenyl)-2-iminoacetamide derivatives are generated presumably via the preliminary formation of N, N′-disubstituted benzo[b]furan-2,3-diamines and subsequent oxidation with molecular oxygen.      

Chromatographic separation of In(III) from Cd(II) in aqueous solutions using commercial resin (Dowex 50W-X8)

This work assesses the potential of an adsorptive material, Dowex 50w-x8, for the separation of indium ions from cadmium ions in aqueous media. The adsorption behavior of Dowex 50 w-x8 for indium and cadmium ions was investigated. The effect of pH, initial concentration of metal ions, the weight of resins, and contact time on the sorption of each of the metal ions were determined. It was found that the adsorption percentage of the indium ions was more than 99% at pH 4.0. The result shows that In (III) was most strongly extracted, while Cd(II) was slightly extracted at this pH value. The recovery of In(III) and Cd(II) ions is around 98% using hydrochloric acid as the best eluent.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Removal of cadmium and copper ions by <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> R57 cells immobilized onto polyvinyl alcohol/tetraethoxysilane hybrid matrices

Polyvinyl alcohol (PVA) and tetraethoxysilane (TEOS) hybrid materials were prepared by sol-gel methods and tested as matrices for immobilization of Trichosporon cutaneum R57, capable of removing cadmium and copper ions from aqueous solutions. A kinetic model was applied and the effects of matrix TEOS content on the copper and cadmium uptake equilibria and rate constants were investigated.      

Facile dehalogenation of halogenated anilines and their derivatives using Al-Ni alloy in alkaline aqueous solution

This article describes the simple hydrodehalogenation of halogenated anilines and their derivatives by the action of Raney aluminium-nickel alloy in aqueous alkaline solution at room temperature. The reaction course was monitored by means of 1H nuclear magnetic resonance (NMR) spectroscopy and GC-MS spectra.      

An analysis of SCF and geometry convergence for diatomic molecules

A geometry and SCF convergence study of Hartree-Fock calculations using the 6-31G* basis set is carried out on the set of all possible diatomic molecules formed from atoms with Z≤36. The utility of Hartree-Fock calculations using the smaller STO-3G basis set to improve the convergence behavior is demonstrated.      

The binary system PbO - BiVO4

Phase equilibria established in the PbO - BiVO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using DTA and XRD.