Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au core–shell nanoparticles

A new two-step synthesis of Fe₃O₄@Au core–shell nanoparticles stabilized in polyethylene glycol is described. The nanoparticles were characterized by transmission electron microscopy, X-ray powder diffraction, UV and Mössbauer spectroscopy. Fe₃O₄@Au nanoparticles featured both optical properties (they featured a plasmon resonance band) and magnetic properties (they responded to an external magnetic field), typical of individual gold and magnetite nanoparticles, respectively.     

Sol–gel synthesis and characterization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> nanocrystalline powder

Al₂O₃–TiO₂ nanocrystalline powders were synthesized by sol–gel process. Aluminum sec-butoxide and titanium isopropoxide chemicals were used as precursors and ethyl acetoacetate was used as chelating agent. Thermal and crystallization behaviors of the precursor powders were investigated by thermal gravimetric-differential thermal analysis, Fourier-transform infrared spectrum and X-ray diffraction. The average crystalline size of heat treated Al₂O₃–TiO₂ powders at 1,100 °C is ~100 nm.     

Calorimetric studies on 2TeO<Subscript>2</Subscript>–V<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Glasses of the composition 2TeO₂–V₂O₅ were fabricated via the conventional melt-quenching technique. The amorphous and the glassy nature of the as-quenched samples were confirmed by X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The glass transition and crystallization parameters were evaluated under non-isothermal conditions using DSC. X-ray diffraction studies confirmed the presence of partially oriented crystallites in the heat-treated glasses. Kauzmann temperature (lower bound for the kinetically observed glass transition) was deduced from the heating rate dependent glass transition and crystallization temperatures.     

Investigation on properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–MWCNTs composites as cathode materials

An effective method to prepare the composites of multi-wall carbon nanotubes (MWCNTs) and vanadium pentoxide (V₂O₅) was presented. Vanadyl-triisopropoxide (VO(OC₃H₇)₃) was used as the starting material, MWCNTs pretreated with acids by a two-step process was used as the conductive ingredient. V₂O₅–MWCNTs composites were synthesized via a sol–gel method with solvent exchange and an ambient pressure drying technique. The samples were characterized by SEM, TEM, XRD, BET, Raman spectra and electrical resistivity measurement respectively. The experimental results indicate that the V₂O₅–MWCNTs nanocomposite has a fiber-like and tri-dimensional network structure. Its surface area is up to 189.7 m²/g when the MWCNTs’ content is 15 wt%. And MWCNTs are dispersed homogeneously in the composites. The electrical resistivity of the composites decreases from 1,239 to 765 Ω·cm when the MWCNTs’ content increases from 0 to 10 wt%. Thus MWCNTs can improve properties of V₂O₅ aerogels as the cathode material in lithium batteries.     

Effect of Fe-zeolite on formation of N<Subscript>2</Subscript>O in selective reduction of NO by NH<Subscript>3</Subscript> over V<Subscript>2</Subscript>O<Subscript>5</Subscript>–WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> catalyst

An approach for significantly suppressing N₂O formation in reduction of NO by NH₃ over V₂O₅–WO₃/TiO₂ (VWT) catalyst has been studied by coating different amounts of a Fe-exchanged zeolite (FeZ) onto the catalyst. FeZ-promoted VWT samples were characterized using N₂ sorption, X-ray diffraction (XRD) analysis, and NH₃ adsorption/desorption techniques to understand the primary role of FeZ in lowering N₂O production levels. At high temperatures (≥450 °C), VWT gave N₂O production with high concentrations, while N₂O formation was noticeably reduced when using FeZ-promoted catalysts, which also showed somewhat lower NO removal activities (<5 %) at all temperatures. N₂ sorption and XRD measurements revealed no perceptible physical or chemical alterations of each constituent, even in VWT catalysts after FeZ coating following high-temperature calcination. Adsorption of NH₃ on unpromoted and FeZ-promoted catalysts and subsequent desorption yielded very complicated spectra for N₂O that might primarily come from NH₃ oxidation, and the interaction between V–NO species at temperatures >580 °C. NO on neighboring sites seems to be produced via decomposition of N₂O generated at lower temperatures. The FeZ in the promoted VWT catalysts could be responsible for N₂O decomposition and N₂O reduction with unreacted NH₃ at temperatures >400 °C, thereby significantly lowering N₂O emission levels. This promotional effect bodes well for use in many industrial deNO _x applications.     

Calorimetric study of the acidic character of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–TiO<Subscript>2</Subscript>/SO<Subscript>4</Subscript><Superscript>2−</Superscript> catalysts used in methanol oxidation to dimethoxymethane

The surface acidic properties of sulfated vanadia–titania catalysts prepared by various methods were investigated by adsorption microcalorimetry, using ammonia as probe molecule. The acidic characteristics of the samples were shown to be strongly affected by the preparation method, calcination temperature, and sulfur content. The samples prepared by sol–gel and mechanical grinding exhibited higher acidity than co-precipitated samples. Moreover, increasing the calcination temperature of co-precipitated samples resulted in a decrease in surface area from 402 to 57 m² g⁻¹ and sulfur content from around 4 to 0.2 mass%, but up to a certain point generated a stronger acidity. The optimal calcination temperature appeared to be around 673 K.     

Preparation,characterization and catalytic studies of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> xerogel composite

In this work, we report the synthesis, characterization and catalytic properties of a vanadium oxide–silicon oxide composite xerogel prepared by a soft chemistry approach. In order to obtain such material, we submitted a vanadium pentoxide gel previously synthesized via protonation of metavanadate species to an “in situ” progressive polycondensation into silica gel. The material has been characterized by X-ray diffraction, infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. Further, the catalytic activity of this material was evaluated for the epoxidation of styrene and cyclooctene using iodosylbenzene, hydrogen peroxide and m-chloroperbenzoic acid as the oxidizing agent.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Thermoelectric power and electrochemical studies on CdI<Subscript>2</Subscript>–Ag<Subscript>2</Subscript>O–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

A quaternary super-ion-conducting system, 20CdI₂ − 80[xAg₂O − y(0.7V₂O₅ − 0.3B₂O₃)] where 1 ≤ x/y ≤ 3, has been prepared by melt quenching technique. The electrical conductivity measured was the order of 10⁻⁴  S/cm at room temperature. The values of silver-ion transport number obtained by electromotive force technique are nearly unity. The thermoelectric power and electrochemical studies were done on the CdI₂–Ag₂O–V₂O₅–B₂O₃ system. The discharge and polarization characteristics were examined for different cathodes to evaluate the utility of these cells as power sources for low energy applications.     

Adsorption of chlorobenzene vapor on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst under dynamic conditions

Adsorption dynamics of chlorobenzene vapors on a 5% V₂O₅/Al₂O₃ catalyst has been investigated using the frontal chromatography technique. The uptakes of chlorobenzene have been measured as a function of vapor concentration and adsorption equilibrium has been found to follow formally the Langmuir isotherm. The breakthrough time proved to be a linear function of the column length as expected. Breakthrough profiles have been reported for different experimental conditions and quantitatively fitted by a reduced lumped diffusion model. This model provides an analytical solution that facilitates engineering calculations. Model parameters show complex behavior as functions of stream characteristics and depend on column length. When empirical expressions relating model mass transfer coefficients with influencing variables are found the model demonstrates good accuracy in predicting column performance.     

Thermal properties of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–PbO–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glass system

Thermal behavior of xGa₂O₃–(50 − x)PbO–50P₂O₅ (x = 0, 10, 20, and 30 mol.% Ga₂O₃) and xGa₂O₃–(70 − x)PbO–30P₂O₅ (x = 0, 10, 20, 30, and 40 mol.% Ga₂O₃) glassy materials were studied by thermo-mechanical analysis (TMA) and differential thermal analysis (DTA). Replacement of PbO for Ga₂O₃ is accompanied by increasing glass-transition temperature (263 ≤ T _g/°C ≤ 535), deformation temperature (363 ≤ T _d/°C ≤ 672), crystallization temperature (396 ≤ T _c/°C ≤ 640) and decreasing of coefficient of thermal expansion (5.1 ≤ CTE/ppm K⁻¹ ≤ 16.7). Values of Hruby parameter were determined (0.1 ≤ K _H ≤ 1.3). The thermal stability of prepared glasses increases with increasing of concentration of Ga₂O₃.     

Photocatalytic and photoelectrocatalytic degradation of metoprolol tartrate in aqueous media by recyclable Co doping Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> magnetic core–shell nanocomposites

Magnetically recoverable cobalt doping Fe₃O₄/TiO₂ magnetic nanocomposites with an acceptable core–shell structure were prepared via a sol-gel process at low calcination temperature. The crystalline size and structure, morphology, and magnetic properties of resulting particles have been characterized by X-ray diffraction (XRD), fourier transform infrared (FT-IR), FT-Raman, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). Metoprolol tartrate (MET) as a pharmaceutical pollutant was used to observe the photocatalytic degradation ability of the magnetically recoverable particles. The process of degradation under UV irradiation at controlled temperature was studied and the remaining concentrations of MET as a contaminant were measured by UV-Vis spectrometer at λ = 229 nm. This ability remained 95.76% after three times of repetitive use at the same conditions. Various parameters such as reaction temperature, pH, and speed of stirring of the aqueous solution had an effect on the rate of degradation. The amount of cobalt dopant and nanocomposites are also effective on the rate of degradation. Coupling of electrical current with photocatalytic process has proven to be effective in the degradation of MET aqueous solution clearly.     

The effect of synthesis conditions on the structure of compounds formed in the Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> system

Crystallization and phase transition processes taking place in the Dy₂O₃–TiO₂ system during the isothermal annealing of the precursors synthesized by co-precipitation were studied. The phase composition of the obtained powders is determined by not only the chemical composition of the precursor (Dy₂O₃: TiO₂ ratio) and annealing temperature but also by the procedure of precursor synthesis determining the uniformity of Dy and Ti distribution in the precursor precipitate. Higher homogeneity of precursor particles provides the formation of almost single-phase nanocrystaline dysprosium titanate (Dy₂TiO₅, Dy₂Ti₂O₇) powders at annealing temperatures of 800–1000°C.     

Reactivity of the oxides in the ternary V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CuO-α-Sb<Subscript>2</Subscript>O<Subscript>4</Subscript> system in air

In this work it has been established which compounds finally are formed in air in the two-component CuO-V₂O₅ and CuO-α-Sb₂O₄ systems. Unknown thermal properties of CuV₂O₆, Cu₂V₂O₇ and Cu₁₁V₆O₂₆ have been established. Reactivity of the oxides and phase relations in the ternary V₂O₅-CuO-α-Sb₂O₄ system in air have been studied by using XRD and DTA methods. The results have showed the reaction of V₂O₅, CuO with α-Sb₂O₄ does not produce any compound where all the three oxides would be involved. It has been established that the α-Sb₂O₄ reacts and forms binary phases independently with CuO or V₂O₅. On the base of these results the investigated system was divided into subsidiary subsystem in which CuSb₂O₆ remains at equilibrium in the solid state with other phases formed in corresponding binary systems.     

The effect of the synthesis method on the morphological and luminescence characteristics of α-Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>

A promising yellow phosphor, α-Zn₂V₂O₇, was synthesized at temperatures below the phase transition temperature (610 ± 5°C) by three different methods: solid-phase and microwave processes and thermolysis of a water–salt composition. According to powder X-ray diffraction, the structures of all samples belonged to space group C/2c. Depending on the method of synthesis, the particle size varied from 500 nm (thermolysis of a water–salt composition) to 5–8 μm (ceramic and microwave methods). The excitation spectra of all samples are in the UV region (220–400 nm) and the emission spectra are in the 400–750 nm wavelength range. The photoluminescence spectra of the samples are non-elementary, which is caused by specific features of the electronic charge transfer in the structural VO₄ tetrahedra.     

Highly Efficient Mesoporous V<Subscript>2</Subscript>O<Subscript>5</Subscript>/WO<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> Catalyst for Selective Catalytic Reduction of NO<Subscript>x</Subscript>: Effect of the Valence of V on the Catalytic Performance

Mesoporous WO₃–TiO₂ support was synthesized by hydrothermal method, mesoporous V₂O₅/WO₃–TiO₂ catalyst was synthesized by impregnation method and used for selective catalytic reduction (SCR) of NO_x with a excellent NO_x conversion at a wider operating temperature ranging from 200 to 460?°C. In the range of 260–440?°C, NO_x conversion reached to 98.6%, and nearly a complete conversion. Even with the existence of 300 ppm SO₂, NO_x conversion was only a little decline. The catalyst was characterized by a series of techniques, such as XRD, BET, XPS, TEM, Raman and H₂-TPR. It was concluded that V₂O₅/WO₃–TiO₂ catalyst was ascribe to antase TiO₂, and also the high crystallinity of anatase TiO₂ could improve the SCR performance. More interested, V₂O₅/WO₃–TiO₂ catalyst exhibited the typical mesoporous structure according to the BET results. In addition, the TEM results indicated that the active components of V and W were well-dispersed on the surface of TiO₂, while the enhancement of dispersion could improve the activity of catalysts. More importantly, the concentration ratio of V⁴⁺/(V⁵⁺?+?V⁴⁺?+?V³⁺) performed the key role in improving the activity of V₂O₅/WO₃–TiO₂ catalyst.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Electrophoretic sol–gel synthesis of SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanowires

We report the independent invention of perovskite ferroelectric nanowires strontium bismuth tantalate (SrBi₂Ta₂O₉, SBT). Electrophoretic sol–gel techniques have been used successfully. The morphology and structures are analyzed via SEM, TEM and XRD. SBT nanowires and nanoparticles filled template revealed 30 and 40 μm long, respectively. SBT are proved to be a single phase of orthorhombic perovskite structure. As it indicated, SBT nanowires has been crystallized at 700 °C. To minimize surface polarity, SBT nanowires oriented preferentially along the growing axis (c axis) by translation and rotation of atomic clusters of SBT.     

Simple sol–gel route to synthesis of mesoporous TiO<Subscript>2</Subscript>

Mesoporous TiO₂ with a high specific surface area was prepared from titanium sulfate solution in a simple sol–gel route, where formamide was used as pH adjusting agent. TiO₂ had a high resistance to phase transformation, and maintained monophasic anatase after calcinating at 600 °C. The highest specific surface area achieved on the prepared samples is 231.90 m² g⁻¹ after calcinating at 450 °C.