Facile approach to obtain individual‐nanotube dispersion at high loading in carbon nanotubes/polyimide composites

A big challenge in making a composite lies in achieving individual‐nanotube dispersion of carbon nanotubes (CNTs) in a polymer matrix, without aggregation and entanglement and excellent interfacial adhesion between the CNTs and the polymers matrix. In this communication, using polyethylene glycol‐200, we successfully prepared CNT‐reinforced polyimide composites that exhibit individual‐nanotube dispertion in the matrix at high‐loading CNT's. The content of CNTs in a composite can reach 43 wt%. Copyright © 2007 John Wiley & Sons, Ltd.     

氢气辅助的水中埋弧法制备小直径碳纳米管

用改进的石墨电弧放电方法制备了小直径、高质量的碳纳米管,以水为打弧介质,氢气为保护气体.该方法具有装置简单,电流小,无催化剂,制备出的多壁碳纳米管直径小于10 nm等优点.     

Polymeric surfactants with tricyclic rigidity from natural rosin: Synthesis and dispersion of single-walled carbon nanotubes in aqueous solution

Polymeric surfactants from natural rosin containing a unique tricyclic rigid structure were prepared and their structures were characterized by IR, ¹H NMR and GPC. Their surface activities including hydrophile—lipophile balance values (HLB), emulsification properties, foaming properties, critical micelle concentration (CMC) and the minimum surface tension (γCMC) were evaluated. With the increase in ratio of hydrophobic to hydrophilic in polymeric surfactant, the CMC values of the surfactants decreased, and the emulsification and foaming properties of these surfactants increased, and the HLB values of them decreased. This type of polymeric surfactants was used to disperse single-walled carbon nanotubes (SWCNTs) in water, and their dispersal capacities were comparatively determined by UV-visible absorption spectroscopy. Thermogravimetric analysis (TGA) was used to quantify the amount of surfactant attached onto the nanotubes. More intuitive image of their dispersion states were obtained by transmission electron microscopy (TEM) and atomic force microscopy (AFM). The results showed that this type of polymeric surfactants had good dispersion capacity and dispersion stability to SWCNTs in water through strong hydrophobic attraction and weak van der Waals interactions.     

Effects of covalent versus non-covalent interactions on the electrocatalytic behavior of tetracarboxyphenoxyphthalocyanine in the presence of multi-walled carbon nanotubes

Tetracarboxyphenoxy phthalocyanine was covalently linked to multi-walled carbon nanotubes and the conjugate was used for modification of glassy carbon electrodes for the detection of hydrogen peroxide. The electrocatalytic behavior was examined by cyclic voltammetry, square wave voltammetry, and rotating disk electrode. The results show that covalent linking is attractive in terms of high detecting currents, low overpotential, and high catalytic rate constants. Very low detection limits were observed with CoTCPhPc-DAMN-MWCNT(linked)-GCE at 0.33 nM. The resulting catalytic rate constant was 1.1 × 10³ M^?1s^?1.     

Hydrogen adsorption in carbon nanostructures: comparison of nanotubes, fibers, and coals

Single-walled carbon nanotubes (SWNT) were reported to have record high hydrogen storage capacities at room temperature, indicating an interaction between hydrogen and carbon matrix that is stronger than known before. Here we present a study of the interaction of hydrogen with activated charcoal, carbon nanofibers, and SWNT that disproves these earlier reports. The hydrogen storage capacity of these materials correlates with the surface area of the material, the activated charcoal having the largest. The SWNT appear to have a relatively low accessible surface area due to bundling of the tubes; the hydrogen does not enter the voids between the tubes in the bundles. Pressure-temperature curves were used to estimate the interaction potential, which was found to be 580+/-60 K. Hydrogen gas was adsorbed in amounts up to 2 wt % only at low temperatures. Molecular rotations observed with neutron scattering indicate that molecular hydrogen is present, and no significant difference was found between the hydrogen molecules adsorbed in the different investigated materials. Results from density functional calculations show molecular hydrogen bonding to an aromatic C[bond]C that is present in the materials investigated. The claims of high storage capacities of SWNT related to their characteristic morphology are unjustified.     

The effect of mixing methods on the dispersion of carbon nanotubes during the solvent-free processing of multiwalled carbon nanotube/epoxy composites

Several solvent-free processing methods to disperse multiwalled carbon nanotubes (MWCNTs) in bisphenol F-based epoxy resin were investigated, including the use of a microfluidizer (MF), planetary shear mixer (PSM), ultrasonication (US) and combinations. The processed mixture was cured with diethyl toluene diamine. Three complimentary techniques were used to characterize the dispersion of the MWCNTs in cured composite samples: optical microscopy, micro Raman spectroscopy, and scanning electron microscopy (SEM). For sample MF + PSM, optical micrographs and Raman images showed reduced agglomeration and a homogeneous distribution of MWCNTs in the epoxy matrix. SEM analysis of fractured specimen after tensile testing revealed breakage of nanotubes along the fracture surface of the composite. A comparison of the MWCNT dispersion in the epoxy samples processed using different methods showed that a combination of MF and PSM processing yields a more homogeneous sample than the PSM or US + PSM processed samples. Mechanical testing of the composites showed about 15% improvement in the tensile strength of samples processed by the MF + PSM method over other methods. Thermogravimetric analysis (TGA) results showed a small decrease in the onset degradation temperature for poorly dispersed samples produced by PSM compared with the well-mixed samples (MF + PSM). These results strongly suggest that the MF + PSM processing method yield better-dispersed and stronger MWCNT/epoxy composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

The behavior of benzene confined in a single wall carbon nanotube

We present the molecular dynamics study of benzene molecules confined into the single wall carbon nanotube. The local structure and orientational ordering of benzene molecules are investigated. It is found that the molecules mostly group in the middle distance from the axis of the tube to the wall. The molecules located in the vicinity of the wall demonstrate some deviation from planar shape. There is a tilted orientational ordering of the molecules which depends on the location of the molecule. It is shown that the diffusion coefficient of the benzene molecules is very small at the conditions we report here. © 2015 Wiley Periodicals, Inc.     

Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Polymer/carbon nanotube nanocomposites: Influence of carbon nanotubes on EVA photodegradation

The influence of carbon nanotubes on the photodegradation of EVA/carbon nanotube nanocomposites was studied by irradiation under photooxidative conditions (at λ > 300 nm, at 60 °C and in the presence of oxygen). The influence of the nanotubes on both the photooxidation mechanism of EVA and the rates of oxidation of the matrix was characterized on the basis of infrared analysis. On one hand, it was shown that the carbon nanotubes act as inner filters and antioxidants, which contribute to reduction in the rate of photooxidation of the polymeric matrix. On the other hand, it was shown that light absorption could provoke an increase in the local temperature and then induce the photooxidation of the polymer. The competition between these three effects determines the global rate of photooxidation of the polymeric matrix. Several factors are involved, the concentration of the carbon nanotubes, the morphology of the nanotubes and the functionalization of the nanotube surface.     

Dispersion of multi-wall carbon nanotubes in polyhistidine: Characterization and analytical applications

We report for the first time the use of polyhistidine (Polyhis) to efficiently disperse multiwall carbon nanotubes (MWCNTs). The optimum dispersion MWCNT–Polyhis was obtained by sonicating for 30 min 1.0 mg mL⁻¹ MWCNTs in 0.25 mg mL⁻¹ Polyhis solution prepared in 75:25 (v/v) ethanol/0.200 M acetate buffer solution pH 5.00. The dispersion was characterized by scanning electron microscopy, and by cyclic voltammetry and amperometry using ascorbic acid as redox marker. The modification of glassy carbon electrodes with MWCNT–Polyhis produces a drastic decrease in the overvoltage for the oxidation of ascorbic acid (580 mV) at variance with the response observed at glassy carbon electrodes modified just with Polyhis, where the charge transfer is more difficult due to the blocking effect of the polymer. The reproducibility for the sensitivities obtained after 10 successive calibration plots using the same surface was 6.3%. The MWCNT-modified glassy carbon electrode demonstrated to be highly stable since after 45 days storage at room temperature the response was 94.0% of the original. The glassy carbon electrode modified with MWCNT–Polyhis dispersion was successfully used to quantify dopamine or uric acid at nanomolar levels, even in the presence of large excess of ascorbic acid. Determinations of uric acid in human blood serum samples demonstrated a very good correlation with the value reported by Wienner laboratory.     

Mechanism of carbon nanotube dispersion and precipitation during treatment with poly(acrylic acid)

Carbon nanotubes have been shown to be easily dispersed within an acidic aqueous solution of poly(acrylic acid) but precipitate when the pH is increased. Transmission electron microscopy showed that the nanotubes were more exfoliated under the acidic condition but highly aggregated under the basic condition. Carbon K‐edge NEXAFS spectroscopy showed that the carbon nanotubes did not chemically react with poly(acrylic acid) during the dispersion or precipitation and that the dispersion mainly involved physical adsorption of poly(acrylic acid) onto the nanotubes. Together with the carbon K‐edge NEXAFS spectra, the cobalt L_{3, 2}‐edge NEXAFS spectra suggested that under the basic condition, the cobalt impurity within the nanotubes strongly reacted with poly(acrylic acid) resulting in complex formation. Cobalt reduces the adsorption of poly(acrylic acid) onto the nanotubes, which then reduced the nanotube dispersion and resulted in the precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

An unexpected new optimum in the structure space of DNA solubilizing single-walled carbon nanotubes

Here we report quantitative data on the amount of single-walled carbon nanotubes that can be suspended with oligodeoxynucleotides in aqueous buffer, together with rate constants for the thermal denaturation of the resulting DNA-nanotube complexes at elevated temperatures. Sequence motifs d(GT)n and d(AC)n with n=2, 3, 5, 10, 20, or 40 were employed, both individually and as equimolar mixtures of the complementary strands. Unexpectedly, the greatest suspending efficiency was found for the mixture of short, complementary oligonucleotides d(GT)3 and d(AC)3. Unlike the suspending efficiency, the kinetic stability of the nanotube suspensions increases with increasing chain length of the DNA, with half life times of >25 h at 90 degrees C for the complexes of the longest strands. Our results identify a new, unexpected optimum in DNA sequence space for suspending carbon nanotubes. They also demonstrate that suspending power depends on the presence of complementary strands. Exploratory assays suggest that nanotubes can be deposited site-selectively from suspensions formed with short DNA sequences.     

Supramolecular hybrids of [60]fullerene and single-wall carbon nanotubes

Noncovalent interactions between purified HiPCO single-wall carbon nanotubes (SWNT) and a [60]fullerene-pyrene dyad, synthesized through a regioselective double-cyclopropanation process, produce stable suspensions in which the tubes are very well dispersed, as evidenced by microscopy characterization. Cyclic voltammetry experiments and photophysical characterization of the suspensions in organic solvents are all indicative of sizeable interactions of the pyrene moiety with the SWNT and, therefore, of the prevalence in solution of [60]fullerene-pyreneSWNT hybrids.     

Lennard-Jones parameters for small diameter carbon nanotubes and water for molecular mechanics simulations from van der Waals density functional calculations

Lennard-Jones (LJ) parameters are derived for classical nonpolarizable force fields for carbon nanotubes (CNTs) and for CNT-water interaction from van der Waals (vdW) enhanced density functional calculations. The new LJ parameters for carbon-carbon interactions are of the same order as those previously used in the literature but differ significantly for CNT-water interactions. This may partially originate from the fact that in addition to pure vdW interactions the polarization and other quantum mechanics effects are embedded into the LJ-potential.     

Ab initio study of chemical bond interactions between covalently functionalized carbon nanotubes via amide,ester and anhydride linkages

In this paper, we have investigated the chemical bond interactions between covalently functionalized zigzag (5,0) and (8,0) SWCNT–SWCNT via various covalent linkages. Side-to-side junctions connected via amide, ester and anhydride linkages were particularly studied. The geometries and energy of the forming reaction were investigated using first-principles density functional theory. Furthermore, the band structures and the total density of states (DOS) of the junctions have also been analyzed. Our results show that several promising structures could be obtained by using chemical connection strategy and particularly the junctions formed by coupling amino functionalized SWCNT and carboxylic acid functionalized SWCNT was more favorable.     

On the influence of diameter and length on the properties of armchair single-walled carbon nanotubes: A theoretical chemistry approach

Open-ended fragments of armchair single-walled carbon nanotubes (n, n) with n = 3, 4, 5, and 6, have been modeled, with increasing lengths from 0.6 to 3 nm long. The geometries of all the studied fragments have been fully optimized. The influence of diameter and length on different electronic properties has been analyzed. These properties are electronegativity, ionization potential, electron affinities, and hardness, and all of them have been expressed as functions of the frontier orbitals. The binding energies per C atom have been calculated, using an expression that improves the previously reported ones. Their absolute values were found to steadily increase with tubes length and diameter, which allows extrapolations to obtain BE_/C atom for tubes of infinite length. The extrapolated values are 8.45, 8.65, 8.74, and 8.79 eV for armchair nanotubes with n = 3, 4, 5, and 6, respectively.