城市老旧居住小区交通环境评价指标与评价方法

定量的评判城市老旧居住小区整体交通环境质量并进而科学有效的提出老旧小区交通环境更新与改善措施,对城市老旧居住小区交通环境进行了调查,明确了老旧居住小区存在的突出交通问题,并提出了城市老旧居住小区交通环境评价的指标体系,包括行人跨路出行指数、无人行道路段长度占比、停车泊位供需比、路内非法停车占比、平均停车步行距离、泊位数量户数比、人均步行空间、无障碍通道、盲道设置比例、非机动车泊位供需比、地面停放车辆数小区面积比、外部穿行交通周转量小区面积比等。并给出了具体指标的计算方法与获得办法。以长沙市四个典型老旧居住小区为例,对评价方法进行了论证,并得到城市老旧居住小区存在的一般问题,包括人车混杂、人车交织现象严重,停车泊位短缺、车辆乱停乱放,交通设施、特别是弱势群体交通设施缺乏。给出的评价指标、评价方法与结论可为城市老旧小区改造更新,特别是其中很重要的交通环境更新提供决策依据。     

Moment information for probability distributions,without solving the moment problem,II: Main-mass,tails and shape approximation

How much information does a small number of moments carry about the unknown distribution function? Is it possible to explicitly obtain from these moments some useful information, e.g., about the support, the modality, the general shape, or the tails of a distribution, without going into a detailed numerical solution of the moment problem? In this, previous and subsequent papers, clear and easy to implement answers will be given to some questions of this type. First, the question of how to distinguish between the main-mass interval and the tail regions, in the case we know only a number of moments of the target distribution function, will be addressed. The answer to this question is based on a version of the Chebyshev–Stieltjes–Markov inequality, which provides us with upper and lower, moment-based, bounds for the target distribution. Then, exploiting existing asymptotic results in the main-mass region, an explicit, moment-based approximation of the target probability density function is provided. Although the latter cannot be considered, in general, as a satisfactory solution, it can always serve as an initial approximation in any iterative scheme for the numerical solution of the moment problem. Numerical results illustrating all the theoretical statements are also presented.     

The generalized hierarchical product of graphs

A generalization of both the hierarchical product and the Cartesian product of graphs is introduced and some of its properties are studied. We call it the generalized hierarchical product. In fact, the obtained graphs turn out to be subgraphs of the Cartesian product of the corresponding factors. Thus, some well-known properties of this product, such as a good connectivity, reduced mean distance, radius and diameter, simple routing algorithms and some optimal communication protocols, are inherited by the generalized hierarchical product. Besides some of these properties, in this paper we study the spectrum, the existence of Hamiltonian cycles, the chromatic number and index, and the connectivity of the generalized hierarchical product.     

基于泊松跳跃的最佳并购时机比较研究

基于最优停时理论、实物期权方法、平滑粘贴条件和道格拉斯生产函数转换,通过时机模型构建与求解,比较分析了无泊松跳跃和有泊松跳跃两种情形下的最佳并购时机。研究结果显示,驱动企业并购的主要是协同效应;企业并购存在仅与并购双方相对股价有关的最佳并购时机及其对应的并购区域;泊松跳跃使并购阈值下界和并购阈值上界右移,并购区域变宽,选择最佳并购时机需要更多信息;在相对股价进入并购区域时,即可实施并购,否则,主并方的最佳策略为持有等待期权,即继续等待。研究结论可为企业选择最佳并购时机,尤其是国有企业选择产权转让的最佳时机提供直接理论指导和实践借鉴。     

The permanence and extinction of a nonlinear growth rate single-species non-autonomous dispersal models with time delays

In this paper, we consider the effect of diffusion on the permanence and extinction of a non-autonomous nonlinear growth rate single-species dispersal model with time delays. Firstly, the sufficient conditions of the permanence and extinction of the species are established, which shows if the growth rate and dispersal coefficients is suitable, the species is permanent, on the contrary, it is extinction. Secondly, an interesting result is established, that is, if only the species in some patches even in one patch is permanent, then it is also permanent in other patches. Finally, some examples together with their numerical simulations show the feasibility of our main results.     

复杂装备研制协调超网络均衡与实现路径

复杂装备研制主体间呈现社会关系、合作关系、协调关系等网络关系,并且相互影响相互作用,其影响复杂装备研制的重要参数。为有效描述在资源环境约束下制造商和供应商的关系,探讨复杂装备研制协调机理与实现路径,本文利用超网络方法,设计了相互影响、相互作用的社会关系网络、协调网络和合作网络的复杂装备研制协调超网络,并将社会关系水平、协调度和合作水平作为超网络的3个决策变量,建立基于关系价值最大、协调成本最低、协调风险最小、合作收益最大、合作风险最小和成本最小等不同偏好下的多目标最优决策模型,构建了复杂装备研制超网络均衡模型,并利用其探讨超网络均衡和实现路径。     

The q-deformed harmonic oscillator, coherent states, and the uncertainty relation

For a q-deformed harmonic oscillator, we find explicit coordinate representations of the creation and annihilation operators, eigenfunctions, and coherent states (the last being defined as eigenstates of the annihilation operator). We calculate the product of the “coordinate-momentum” uncertainties in q-oscillator eigenstates and in coherent states. For the oscillator, this product is minimum in the ground state and equals 1/2, as in the standard quantum mechanics. For coherent states, the q-deformation results in a violation of the standard uncertainty relation; the product of the coordinate-and momentum-operator uncertainties is always less than 1/2. States with the minimum uncertainty, which tends to zero, correspond to the values of λ near the convergence radius of the q-exponential. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 147, No. 2, pp. 315–322, May, 2006.     

A limit surface formulation for plastically compressible polymers

The tightening of industrial safety standards for structures generates a need for refined computational methods, which, among other things, must be able to describe the yield surface and the deformation behaviour of non-reinforced thermoplastics. To describe the plastic behaviour of materials, a potential formulation is suggested. This formulation contains a number of known potentials as special cases. The parameters of the model, which are obtained from test data, are restricted by the convexity condition for the potential. The new model allows one to take into account effects of the second order, for instance, the unequal behaviour under tension and compression, the plastic compressibility, and the Poynting-Swift effect. For each particular choice of the parameters, the Poisson ratio in tension is computed. If the restrictions imposed on the Poisson ratio do not hold, the application of a non-associated flow rule is necessary. A simple non-associated flow rule with different values of Poisson ratio intension and compression is proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 3, pp. 367–384, May–June, 2007.     

Quality rating of a metal matrix-diamondcomposite from its thermal conductivity and electric resistance

The efficiency of hot-pressed diamond-containing composite materials (DCM) for various tool applications is greatly affected by microdefects, namely, the residual porosity of the metal matrix, damaged diamond grains, and imperfect diamond-matrix interfaces. An instrumental evaluation of these microdefects, predetermining the quality of a tool equipped with DCM, is rather difficult due to the small size, the nonstandard shape, and the strong heterogeneity of specimens. Proposed here is an alternative, nondestructive technique of DCM quality rating, which includes the measurement of electric resistance and thermal conductivity of diamond-containing composites and processing the obtained data by the methods of composite mechanics. It exploits the fact that diamond, being a dielectric, possesses an extremely high thermal conductivity, which allows estimating the residual porosity of a sintered metal matrix from the ratio of specific electric resistances, one being measured and another predicted by a theory. These data, in turn, are utilized to predict the thermal conductivity ofDCMwith an imperfect matrix. Matching with experiments, after solving the inverse problem gives the thermal resistance of diamond-matrix interface, which, within the frame work of the given model, simulates the damage of both the diamond grains and their bonds with the matrix. Thus, the numerical rating of quality is given in terms of two dimensionless parameters. The first one, 0 < K < 1, reflects the quality of the sintered metal matrix, whereas the second one, 0 < R <1, is an aggregate measure of the integrity of diamond grains and the perfection degree of composite interfaces. The quite satisfactory agreement observed between the theory and experiment confirms the efficiency of the technique and the reliability of the data obtained. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 361–374, May–June, 2006.     

Utilization and maintenance in a model with scrapping

We consider a productive asset, called equipment or capital good, and we examine the properties of, as well as the interactions between, the operating policies, which are determined by its optimal utilization and maintenance, and the capital policy of scrapping, which defines the optimal time when the productive asset is retired from its current use. Starting with an abstract model and using the approach of optimal control, initially we characterize the various types of equipment by assigning to them a single total profit index, which indicates how the above policies affect the flow of operating revenues plus capital gains or losses. This index is a function of market-determined prices. So using it we then investigate how the operating and capital policies are influenced by the rate of discount, the price of new equipment, and the rise or fall of the price of new equipment relative to the value of its output. Among other interesting results, we find that the effects of these prices on the nature and interactions of optimal policies depend crucially on whether the equipment is of the usual profit making type, where output is the main source of revenue, or of the antique type, where the main source of revenue is capital gains.     

基于模糊FNN-ELECTRE法的国有商业银行竞争力评价

随着金融业全方位开放,国有商业银行已成为国家经济命脉的核心,其竞争力强弱关系着国家经济的繁荣与衰退。本文基于模糊FNN-ELECTRE方法建立国有商业银行竞争力评价模型,以因素神经网络理论(FNN)与ELECTRE融合方法为基础,以现有商业银行竞争力评价指标为着眼,把国有商业银行竞争力的评价体系从现实竞争力和潜在竞争力两个因素抽取为一级指标,以规模、质量、业务结构、效率、成长性五个因素设为二级指标。从实证的角度对银行A、银行B、银行C、银行D、银行E五大国有银行进行分析验证,对其属性值进行和谐性与非和谐性检验得出,银行B竞争能力最强,银行E竞争能力最弱,五大国有银行均有改进空间。     

邻避冲突中的利益相关者演化博弈分析——以污染类邻避设施为例

工业化、城市化进程的加快在推进社会经济发展的同时,也催生了公民权利意识和环保意识的觉醒。在整体利益与局部利益、经济利益与环境利益等一系列矛盾交织的宏观背景下,继劳资纠纷、征地拆迁之后,污染类邻避设施成为诱发群体性事件的关键因子。因此,探究政府、邻避设施营建企业与周边民众三方间利益关系,理清相关主体的利益诉求对于邻避冲突的预防和处置具有重要实践意义。本文基于利益相关者理论,探究污染类邻避设施相关利益主体在冲突中所扮演的角色和发挥的作用,进而从博弈论视角出发构建政府、邻避设施营建企业和周边民众之间的三方演化博弈模型。在此基础上,通过对政府、营建企业和周边民众的稳定演化博弈策略选择分析,得出推动博弈三方向演化稳定策略点收敛的条件。利用Matlab对三方演化模型模拟仿真,结果表明政府采取不监管策略、营建企业采取合作策略及周边民众采取不抵抗策略是邻避冲突中三方利益相关者演化博弈的稳定策略点;高强度的政府奖励力度有利于促进营建企业采取合作策略,而抑制周边民众抵抗行为策略的选择;营建企业的经济补偿对于降低民众抵抗力度具有临界点,只有高额的经济补偿才会激励民众选择不抵抗的行为策略;而周边民众的抵抗力度对营建企业的策略选择无显著影响。本文研究结果对邻避冲突中相关利益主体起到一定启示作用:第一,政府作为邻避设施建设的监管者,应注重把握监管力度,完善公众参与渠道,降低个体风险感知;第二,营建企业作为邻避设施建设的实施者,应积极采用环保技术,构建科学利益补偿机制;第三,周边民众对于邻避设施的“落地”发挥关键作用,应加强自身公共理性,合理评估邻避风险,自觉维护社会公共利益。     

Rolling-ball method for estimating the boundary of the support of a point-process intensity

We suggest a generalisation of the convex-hull method, or ‘DEA’ approach, for estimating the boundary or frontier of the support of a point cloud. Figuratively, our method involves rolling a ball around the cloud, and using the equilibrium positions of the ball to define an estimator of the envelope of the point cloud. Constructively, we use these ideas to remove lines from a triangulation of the points, and thereby compute a generalised form of a convex hull. The radius of the ball acts as a smoothing parameter, with the convex-hull estimator being obtained by taking the radius to be infinite. Unlike the convex-hull approach, however, our method applies to quite general frontiers, which may be neither convex nor concave. It brings to these contexts the attractive features of the convex hull: simplicity of concept, rotation-invariance, and ready extension to higher dimensions. It admits bias corrections, which we describe and illustrate through implementation.     

Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds

The stress state of the surface layer of a polymeric mass during filling of bulky compression molds is analyzed. It is shown that, at particular rheological characteristics of the mass, temperature, and filling rates, cracking of the surface layer occurs, which leads to defects in the finished products. A physical analysis of this process makes it possible to conclude that the cracks arise due to the normal stresses operating in the front region of the moving polymeric mass. It is found that, under certain flow conditions, areas with a pressure lower than the atmospheric one appear on the surface of the polymer. If the tensile stresses arising in these local regions are higher than the tensile strength of the mass, the continuity of the composition is broken in the direction determined by the greatest rate of the normal deformation. To confirm the reliability of the crack-formation mechanism proposed, the distribution of the pressure and normal stresses over the free surface is calculated based on a numerical method. These calculations show that, by comparing the stress level achieved in the front region with the tensile-strength characteristics of the polymeric composition, it is possible to predict, with a sufficient accuracy, the possibility of crack formation in the surface layer of such a mass under given flow conditions and thus to solve the question on flawless manufacturing of products.     

Is prediction possible? Chaotic behavior of Multiple Equilibria Regulation Model in cellular automata topology

In this article, we present the Multiple Equilibria Regulation (MER) Model in cellular automata topology. As argued in previous explorations of the model, for certain parameter values, the behavior of the system exhibits transient chaos (namely, the system is unpredictable but ends in a final steady state). In order to approach empirical reality, we introduce a cellular automata topology. Examining the outcome of the simulations leads us to conclude that for certain parameter values tested, the system yields chaotic behavior. Thus, cellular automata contribution has proven crucial, because the introduced topology converts the behavior of the system from transient chaos to “pure” chaos, i.e., the system is not only unpredictable on the long run but, in addition, it will never rest in a final steady state. According to these findings, authors argue the theoretical hypothesis that the urge for “prediction” in social sciences should be reconsidered in terms of “predictability horizon”. © 2004 Wiley Periodicals, Inc. Complexity 10: 23–36, 2004     

函数概念的起源、演变与发展

按照时间的推进,先后论述了函数概念的起源、诞生、严密化、飞跃及其扩展.     

卷烟材料组合搭配对主流烟气量及过滤效率的影响

为研究卷烟纸、成型纸、接装纸及嘴棒组合搭配对"中式卷烟"焦油量、烟气烟碱量、烟气水分、烟气一氧化碳量及过滤效率的影响,尝试采用L_(27)(3~(13))裂区正交设计方法对RR卷烟进行在线试验和取样.检测结果经过直观分析、方差分析及贡献率分析,结果表明:嘴棒长度、吸阻及接装纸透气度是影响试验指标的高度显著因素及重要因素.所以重点对嘴棒长度、吸阻及接装纸透气度进行调整和控制,可以很好地实现卷烟产品的质量控制,减少产品质量波动,降低产品成本.使用该方法可快捷、高效、经济、准确地寻找并确定卷烟材料多因素对卷烟主流烟气量及过滤效率的影响规律及卷烟产品的材料搭配优化方案.从而实现卷烟产品材料搭配精益化,满足烟草企业的实际需求.     

Discursive positionings and emotions in modelling activities

Mathematical modelling is suggested as an activity through which students engage in meaningful mathematics. In the current research, the modelling activity of a group of four seventh-grade students was analysed using the discursive analysis framework. The research findings show that the positionings and emotions of the group members during their participation in the modelling activity changed as the activity proceeded. Overall, it can be said that three of the four group members acted as insiders, while the fourth acted as an outsider, and only, towards the end of the group's work on the activity, he acted as an insider. Moreover, the research findings point at four factors that affected the group members’ positionings and emotions during the modelling activity: the member's characteristics, the member's history of learning experiences, the activity characteristics and the modelling phases. Furthermore, the different positionings of the group members in the different modelling phases were accompanied by different emotions experienced by them, where being an insider and a collaborator resulted in positive emotions, while being an outsider resulted in negative emotions.     

Formulation of linear problems and solution by a universal machine

Using the predicate language for ordered fields a class of problems referred to aslinear problems is defined. This class contains, for example, all systems of linear equations and inequalities, all linear programming problems, all integer programming problems with bounded variables, all linear complementarity problems, the testing of whether sets that are defined by linear inequalities are semilattices, all satisfiability problems in sentenial logic, the rank-computation of matrices, the computation of row-reduced echelon forms of matrices, and all quadratic programming problems with bounded variables. A single, one, algorithm, to which we refer as theUniversal Linear Machine, is described. It solves any instance of any linear problem. The Universal Linear Machine runs in two phases. Given a linear problem, in the first phase a Compiler running on a Turing Machine generates alinear algorithm for the problem. Then, given an instance of the linear problem, in the second phase the linear algorithm solves the particular instance of the linear problem. The linear algorithm is finite, deterministic, loopless and executes only the five ordered field operations — additions, multiplications, subtractions, divisions and comparisons. Conversely, we show that for each linear algorithm there is a linear problem which the linear algorithm solves uniquely. Finally, it is shown that with a linear algorithm for a linear problem, one can solve certain parametric instances of the linear problem.Research was supported in part by the National Science Foundation Grant DMS 92-07409, by the Department of Energy Grant DE-FG03-87-ER-25028, by the United States—Israel Binational Science Foundation Grant 90-00434 and by ONR Grant N00014-92-J1142.Corresponding author.