Speciation of organomercury compounds by capillary electrophoresis with pre-column derivatization and on-line stacking

A simple capillary electrophoresis method was developed to separate and quantify methylmercury, ethylmercury, and phenylmercury with the enhancement of pre-column derivatization and on-line stacking.     

Enrichment and separation of acidic and basic proteins using the centrifugal ultrafiltration followed by nanoparticle-filled capillary electrophoresis

This report describes a method for enrichment and separation of acidic and basic proteins using the centrifugal ultrafiltration followed by nanoparticle-filled capillary electrophoresis. To improve stacking and separation efficiencies of proteins, the separation buffer containing 1.6% poly(diallyldimethylammonium chloride) was added with gold nanoparticles (AuNP), poly(ethylene oxide), cetyltrimethylammonium bromide, and poly(vinyl alcohol). As a result, the use of AuNP as additives exhibited better efficiency in separation, stacking, and analysis time. Even for large-volume samples (110 nL), the separation efficiencies of acidic and basic proteins remained greater than 10(4) and 10(5) plates/m, respectively. To further enhance detection sensitivity, protein samples were enriched using the centrifugal ultrafiltration, followed by our proposed stacking method. The detection sensitivity was improved up to 314-fold compared to normal hydrodynamic injection. Additionally, the limits of detection at a signal-to-noise of 3 for most proteins were down to nanomolar range. We have validated the application of our method by means of analyses of 50 nM lysozyme in saliva samples. The proposed method was also successfully applied to the analyses of egg-white proteins, which have large differences in molecular weight and pI.     

Sample stacking for the analysis of eight penicillin antibiotics by micellar electrokinetic capillary chromatography

We studied the use of micellar electrokinetic capillary chromatography for separating eight penicillins. The method consists of (i) an electrophoretic separation based on micellar electrokinetic capillary chromatography, which uses sodium dodecyl sulfate (SDS) as surfactant; (ii) a sample stacking technique called reverse electrode polarity stacking mode (REPSM); and (iii) direct UV detection. The background electrolyte that gave complete separation contained 20 mM sodium borate buffer and 60 mM SDS. The sensitivity of the method was improved by an enrichment step that used on-column stacking. The limits of detection were at the microg.L(-1) level for the penicillins and did not detract from the peak resolution.     

Analysis of anabolic androgenic steroids in urine by full-capillary sample injection combined with a sweeping CE stacking method

This study describes an on-line stacking CE approach by sweeping with whole capillary sample filling for analyzing five anabolic androgenic steroids in urine samples. The five anabolic steroids for detection were androstenedione, testosterone, epitestosterone, boldenone, and clostebol. Anabolic androgenic steroids are abused in sport doping because they can promote muscle growth. Therefore, a sensitive detection method is imperatively required for monitoring the urine samples of athletes. In this research, an interesting and reliable stacking capillary electrophoresis method was established for analysis of anabolic steroids in urine. After liquid–liquid extraction by n-hexane, the supernatant was dried and reconstituted with 30 mM phosphate buffer (pH 5.00) and loaded into the capillary by hydrodynamic injection (10 psi, 99.9 s). The stacking and separation were simultaneously accomplished at ?20 kV in phosphate buffer (30 mM, pH 5.0) containing 100 mM sodium dodecyl sulfate and 40 % methanol. During the method validation, calibration curves were linear (r?≥?0.990) over a range of 50–1,000 ng/mL for the five analytes. In the evaluation of precision and accuracy for this method, the absolute values of the RSD and the RE in the intra-day (n?=?3) and inter-day (n?=?5) analyses were all less than 6.6 %. The limit of detection for the five analytes was 30 ng/mL (S/N?=?5, sampling 99.9 s at 10 psi). Compared with simple MECK, this stacking method possessed a 108- to 175-fold increase in sensitivity. This simple and sensitive stacking method could be used as a powerful tool for monitoring the illegal use of doping.     

毛细管电泳中移动反应界面法富集和检测尿样中的氧化苦参碱

采用建立在移动反应界面理论上的体系进行尿样中氧化苦参碱的富集与定量检测。与传统的毛细管电泳相比,体系中引入了富集缓冲溶液(富集相)和分离缓冲溶液(分离相)。优化的条件如下:样品缓冲溶液为20 mmol/L 甲酸钠(用氨水调节pH至10.70),富集缓冲溶液为40 mmol/L 甲酸-甲酸钠(pH 2.60),分离缓冲溶液为100 mmol/L 甲酸-甲酸钠(pH 4.80);样品相压力进样1.4 kPa×3 min,富集相压力进样1.4 kPa×7 min,紫外检测波长210 nm,电压21 kV。氧化苦参碱在2.2~65 mg/L的质量浓度范围内呈良好的线性关系(r=0.9991),检出限为0.74 mg/L,灵敏度比常规毛细管电泳方法提高约70倍,重现性良好。该方法已经成功地应用于尿样中氧化苦参碱的检测。     

Large-volume sample stacking with polarity switching for the analysis of bacteria by capillary electrophoresis with laser-induced fluorescence detection

Capillary electrophoresis has been utilized for the rapid analysis of bacteria under specific experimental conditions. In this work, a method of large-volume sample stacking with polarity switching was evaluated for the analysis of bacteria by capillary electrophoresis with laser-induced fluorescence detection in order to enhance the detection sensitivity. The results indicated that the proposed method is not only effective for the focusing of bacterial cells, but also for the separation of mixtures of bacteria. With the optimized conditions, an enhancement factor of around 60-fold was obtained when long sample plug (up to 39.6% of capillary volume) was injected. Moreover, with the help of such stacking method, single, sharp, intense peak with high efficiency was observed without multiple peaks attributable to irregular clusters and aggregates of bacterial cells. This simple stacking approach appears to be promising as a rapid sterility test in various fields of applications.     

Pesticide analysis by micellar electrokinetic capillary chromatography

On-capillary sample concentration using sample stacking for the improvement of detection limits for various pesticides separated by micellar electrokinetic capillary chromatography was examined. The dependence of the stacking on different parameters was investigated. An approximately 30-fold preconcentration was achieved by applying sample stacking. Employing a two-step enrichment process (solid-phase extraction combined with sample stacking), detection limits were improved and the sample volume for SPE was reduced. In addition, the total time for the analysis was considerably reduced. Detection limits were between 0.01 and 0.1 ng/ml under these enrichment conditions.     

On-line stacking techniques for the nonaqueous capillary electrophoretic determination of acrylamide in processed food

In the present study, field amplified sample stacking (FASS) techniques in the nonaqueous capillary electrophoresis method (NACE) were introduced for the on-line concentration of the acrylamide to improve acrylamide detection at 210 nm by diode-array detection. Acetonitrile (ACN) as a nonaqueous solvent permits acrylamide to be protonated through the change of its acid-base chemistry, allowing capillary electrophoretic separation of this compound. Choosing 30 mmol L(-1) HClO(4), 20 mmol L(-1) NaClO(4), 218 mmol L(-1) CH(3)COOH in ACN as the separation electrolyte and employing sample stacking methods, the LOD value of acrylamide was decreased to 2.6 ng mL(-1) with electrokinetic injection and 4.4 ng mL(-1) with hydrodynamic injection. Optimized stacking conditions were applied to the determination of acrylamide in several foodstuffs. The method is simple, rapid, inexpensive, and widely applicable for the determination of acrylamide in food samples.     

Electrophoretic determination of albumin in urine using on-line concentration techniques

To improve the sensitivity of the UV-detection for the determination of trace amounts of albumin by capillary zone electrophoresis (CZE), five on-line preconcentration techniques, including field-amplified sample stacking (FASS), head-column field-amplified sample stacking (HC-FASS), stacking with a polymer solution, dynamic pH junction and large volume sample stacking (LVSS) with reversed polarity, were compared. Sensitivity enhancement factor and reproducibility were two factors that were used to assess the suitability of each method. To minimize protein adsorption on the capillary wall, capillaries were covalently modified with anionic polymer, poly(sulfopropylmethacrylate) coating. All used methods have good reproducibility. The maximum sensitivity enhancement factor (about 67-fold in terms of peak heights) was achieved with LVSS technique. The concentration limit of detection (LOD) (S/N=3) for the human serum albumin obtained with the optimized LVSS approach was 15 microg/ml with UV-detection. The method was further evaluated for the analysis of urine samples with gel-filtration-based sample-desalting procedure.     

On‐line synergistic stacking in capillary zone electrophoresis featuring field‐amplified sample stacking and micelle to cyclodextrin stacking in the determination of two alkaloids in complicated matrix samples

A novel on‐line synergistic proconcentration strategy coupling field‐amplified sample stacking and micelle to cyclodextrin stacking for cationic analytes in capillary zone electrophoresis has been proposed and applied for the separation and determination of two alkaloids, matrine, and oxymatrine in complicated matrix samples. The approach was performed by the long injection of sample in a low‐conductivity sodium dodecyl benzene sulfonate solution followed by the injection of hydroxypropyl‐β‐cyclodextrin solution in higher conductivity. The stacking mechanism of this method has been expounded and parameters affecting stacking effect have been optimized in our study. Under the optimum experimental conditions, 169‐ and 218‐fold sensitivity improvements were achieved for matrine and oxymatrine when compared with normal injection. Analytical indicators including linearity, limits of detection, and reproducibility (intra‐ and inter‐day relative standard deviations) were evaluated. Moreover, sample matrix effect was studied using compound flavescent sophora and salicylic acid powder and spiked urine samples. The developed method is an attempt for the combination of micelle to cyclodextrin stacking with other stacking methods. It could be a good alternative choice for the determination of alkaloids in a complex sample matrix.     

Analysis of tetracycline residues in bovine milk by CE-MS with field-amplified sample stacking

A rapid, sensitive, and robust CE-MS method has been developed for the determination of tetracycline, oxytetracycline, and chlortetracycline in milk. Field-amplified sample stacking with electromigration injection (FASS-EMI) was used for the online concentration of tetracyclines. The conditions of separation, MS detection, and stacking were systematically optimized. The optimum buffer composition was 35 mM Tris, 1.1% formic acid, 5% methanol, and 15% ACN. By using the online concentration method of field-enhanced sample stacking (FESI)-EMI stacking, the sensitivity was increased six- to seven-fold. The RSDs (n=6) of the relative migration time of tetracyclines were 1.1-1.4% for intraday and 2.4-2.9% for interday. The RSDs (n=6) of the relative peak area of tetracyclines were 3.2-4.6% for intraday and 4.7-6.1% for interday. The LODs (S/N=3) were 7.14 ng/mL for tetracycline, 11.4 ng/mL for oxytetracycline, and 14.9 ng/mL for chlortetracycline. The method has been successfully used to analyze tetracyclines residues in bovine milk.     

Large-volume sample stacking for analysis of ethylenediaminetetraacetic acid by capillary electrophoresis

A simple, quick, and sensitive capillary electrophoretic technique-large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) - has been developed for determining ethylenediaminetetraacetic acid (EDTA) in drinking water for the first time. It is based on a precapillary complexation of EDTA with Fe(III) ions, followed by large-volume sample stacking and direct UV detection at 258 nm. The curve of peak response versus concentration was linear from 5.0 to 600.0 microg/L, and 0.7 to 30.0 mg/L. The regression coefficients were 0.9988 and 0.9990, respectively. The detection limit of the current technique for EDTA analysis was 0.2 microg/L with an additional 10-fold preconcentration procedure, based on the signal-to-noise ratio of 3. As opposed to the classical capillary zone electrophoresis (CE) method, the detection limit was improved about 1000-fold by using this LVSEP method. To the best of our knowledge, it represents the highest sensitivity for EDTA analysis via CE. Several drinking water samples were tested by this novel method with satisfactory results.     

Comparison of two capillary electrophoresis online stacking modes by analysis of polycyclic aromatic hydrocarbons in airborne particulates

Naphthalene, fluorene, pyrene, anthracene, phenanthrene, and chrysene were successfully separated by CD-modified MEKC (CD-MEKC) using 20 mM borate (pH 9.0) containing 90 mM SDS and 75 mM beta-CD. Two online stacking methods, i.e., sweeping and field-enhanced sample injection (FESI), were explored to enhance the detection sensitivity. The influences of some crucial parameters in sweeping and FESI procedures were investigated. For FESI method, a plug of water and low-conductivity sample matrix was used to increase the stacking efficiency. Compared with the sweeping method, FESI can increase the sensitivity in the range of 10-20-fold. The proposed method was used for the analysis of polycyclic aromatic hydrocarbons in airborne particulates.     

Sample pre-concentration by isotachophoresis in microfluidic devices

We have designed microfluidic devices with the aim of coupling isotachophoresis (ITP) with zone electrophoresis (ZE) as a method to increase the concentration limit of detection in microfluidic devices. We used plastic multi-channel chips, designed with long sample injection channel segments, to increase the sample loading. The chip was designed to allow stacking of the sample into a narrow band by discontinuous ITP buffers and subsequent separation in the ZE mode. In the ITP-ZE mode, with a 2-cm long sample injection plug, sensitivity was increased by 400-fold over chip ZE and we found that the separation performance after the ITP stacking was comparable to that of regular chip ZE. We report sub-picomolar limits of detection of fluorescently labeled ACLARA eTag reporter molecules electrokinetically injected from cell lysate sample matrixes containing moderate salt concentrations. We evaluated sample injections from buffers with varied ionic strengths and found that efficient stacking and separations were obtained in both low and high conductivity buffers, including physiological buffer with at least 140 mM salt. We applied ITP-ZE to the analysis of a cell surface protease (ADAM 17) which used live intact cells in physiological buffers with detection limits below 10 cells/assay.     

Trace determination of arsenic species by capillary electrophoresis with direct UV detection using sensitivity enhancement by counter- or co-electroosmotic flow stacking and a high-sensitivity cell

Stacking techniques used independently and also with a high-sensitivity cell (HSC) were employed to optimise sensitivity and detection limits in the direct photometric detection of the following eight arsenic species by capillary zone electrophoresis (CZE): arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), 4-hydroxy-3-nitrophenylarsonic acid (Roxarsone), p-aminophenylarsonic acid (p-ASA), 4-nitrophenylarsonic acid (4-NPAA), and phenylarsonic acid (PAA) (target analytes). The stacking mechanisms, optimised stacking and separation conditions, and concentration sensitivity enhancement factors were discussed and compared for (i) normal stacking mode (NSM, sometimes also referred to as field-amplified stacking) in an uncoated fused-silica capillary in the counter-electroosmotic flow (EOF) mode, (ii) large-volume sample stacking (LVSS) with polarity switching, and (iii) the less often applied stacking method of co-EOF NSM stacking with EOF reversal using a poly(diallydimethylammonium chloride) (PDDAC)-coated capillary. The optimal injection volumes were 7.4, 60 and 17.2% of the total capillary volume, for the above three methods, respectively. LVSS with polarity switching gave the lowest limit of detection (LOD). The use of the HSC further reduced the LOD of each target analytes by a factor of 5-8 times. By combining LVSS and HSC, LODs of the target analytes could be reduced by a factor of 218-311, to 5.61, 9.15, 11.1, and 17.1 microg/L for As(III), DMA, MMA, and As(V), respectively. The method was demonstrated to be applicable to the determination of the target analytes in tap water and lake water, with recoveries in the range of 89.4-103.3%.     

Combination of liquid-phase microextraction and on-column stacking for trace analysis of amino alcohols by capillary electrophoresis

We described a new method for the enrichment of basic drugs present in water samples via liquid-phase microextraction (LPME) combined with on-column stacking in capillary electrophoresis. Two steps were employed to enhance the detection sensitivity of four amino alcohols. The analytes were first extracted from aqueous sample (donor solution) that were adjusted to basic through a thin layer of 1-octanol entrapped within the pores of a polypropylene hollow fiber, and then into a 5-microl acidic acceptor solution inside the hollow fiber. The extract was then further enriched through on-column stacking in capillary electrophoresis. With this two-step enrichment procedure, the method provided 72-110-fold preconcentration of the target amino alcohols. The limits of detection were 0.08-0.5 microg/ml. Relative standard deviation (n=6) ranged between 4.3 and 6.9% for the studied drugs utilizing 2-amino-1-phenylethanol as internal standard. The extraction of amino alcohols in spiked urine samples was evaluated using the developed procedure.     

Study on sensitivity development of 2,3-dihydroxybenzoic acid by capillary zone electrophoresis-amperometric detection with p-methyl benzoate as stacking agent

For its high reactivity and very short half-life, the hydroxyl radical (OH.) in vivo is very difficult to be detected. Usually, it is indirectly quantified by determining 2,3-dihydroxybenzoic acid (2,3-DHBA) and 2,5-dihydroxybenzoic acid (2,5-DHBA), which are the reaction products of salicylic acid (SA) and OH.. Because 2,5-DHBA could be directly formed by the P(450) enzyme, only 2,3-DHBA is regarded as the real biomarker of OH.in biological studies. But the very low concentration of OH* in human bodies makes its determination very difficult and complicated. In this paper, a simple online stacking capillary zone electrophoresis coupled with amperometric detection (CZE-AD) method was explored to improve the detection sensitivity of 2,3-DHBA to reach the requirements in biological analysis. A mixture solution of 12.5 mmol/L Na(2)B(4)O(7)-25 mmol/L NaH(2)PO(4) (pH 7.9) was used as the running buffer and p-methyl benzoate was selected as a suitable stacker. The effects of the concentration, pH value, and injection time of p-methyl benzoate on stacking efficiency were carefully studied. Under the optimum stacking CZE-AD conditions, the detection sensitivity of 2,3-DHBA was improved about 20-fold and its detection limit reached the 10(-9) mol/L level. The experimental results showed that this was a potential method to determine OH* in vivo.     

The in‐capillary DPPH‐capillary electrophoresis‐the diode array detector combined with reversed‐electrode polarity stacking mode for screening and quantifying major antioxidants in Cuscuta chinensis Lam

An in‐capillary 2, 2‐diphenyl‐1‐picrylhydrazyl (DPPH)‐CE‐the DAD (in‐capillary DPPH‐CE‐DAD) combined with reversed‐electrode polarity stacking mode has been developed to screen and quantify the active antioxidant components of Cuscuta chinensis Lam. The operation parameters were optimized with regard to the pH and concentration of buffer solution, SDS, β‐CDs, organic modifier, as well as separation voltage and temperature. Six antioxidants including chlorogenic acid, p‐coumaric acid, rutin, hyperin, isoquercitrin, and astragalin were screened and the total antioxidant activity of the complex matrix was successfully evaluated based on the decreased peak area of DPPH by the established DPPH‐CE‐DAD method. Sensitivity was enhanced under reversed‐electrode polarity stacking mode and 10‐ to 31‐fold of magnitude improvement in detection sensitivity for each analyte was attained. The results demonstrated that the newly established in‐capillary DPPH‐CE‐DAD method combined with reversed‐electrode polarity stacking mode could integrate sample concentration, the oxidizing reaction, separation, and detection into one capillary to fully automate the system. It was considered a suitable technique for the separation, screening, and determination of trace antioxidants in natural products.     

Determination of flotation reagents used in tin-mining by capillary electrophoresis.

Alkyl xanthates (O-alkyl dithiocarbonates) and phosphonates are important organic collectors for the flotation of metals from crude ore. Leaching from waste dumps into river and ground water, these substances can cause environmental pollution. A capillary electrophoretic method for the routine determination of ethyl, isopropyl, hexyl xanthate, and styrene phosphonate has been developed. Separation within 12 min could be achieved in borate pH 8.8 performing UV detection at 254 and 300 nm simultaneously. To improve the limits of detection obtained with hydrodynamic injection (0.4-1.5 ppm), field amplified sample injection (FASI) and stacking were investigated. An increase in sensitivity up to 4-8 fold could be achieved by pressure assisted FASI. Applying a stacking method to enrich the analytes by filling the capillary with sample solution to one third of its length, the limits of detection could be decreased to 10-40 ppb. Water samples from a former tin ore mining area have been analyzed using the optimized stacking technique. Quantitation was performed by standard addition. Good precision and accuracy were obtained, making this robust capillary electrophoretic method well-suited for routine analysis.     

可视移动中和反应界面离线富集-毛细管电泳法检测电镀废水中痕量重金属离子

建立了一种可视化的、利用移动中和界面离线富集-毛细管电泳检测电镀水中痕量重金属离子的新方法。在该富集系统中,阳极电解液为2.1 mmol/L HCl-98 mmol/L KCl-痕量重金属离子,阴极电解液为4.0 mmol/L NaOH-96 mmol/L KCl,界面向阴极移动,分离电压为180 V,阴极电解液和阳极电解液的流速均为1 mL/min。富集后凝胶中的金属离子浓度用毛细管电泳检测,标准曲线在实验浓度范围内均有良好的线性关系(r≥0.9985),预富集倍数达80～150倍,Cu(II)、Zn(II)、Ni(II)、Mg(II)、Ca(II)、Cr(III)和Fe(III)的检出限分别为0.163、0.256、0.077、0.153、0.203、0.062和0.142 mg/L,均明显低于国家规定标准;日内和日间精密度均小于7.42%。所建方法已成功用于实际电镀废水样品中痕量重金属离子的富集和检测。