Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Atomic Force Microscopy for Molecular Structure Elucidation

Using scanning probe microscopy techniques, at low temperatures and in ultrahigh vacuum, individual molecules adsorbed on surfaces can be probed with ultrahigh resolution to determine their structure and details of their conformation, configuration, charge states, aromaticity, and the contributions of resonance structures. Functionalizing the tip of an atomic force microscope with a CO molecule enabled atomic‐resolution imaging of single molecules, and measurement of their adsorption geometry and bond‐order relations. In addition, by using scanning tunneling microscopy and Kelvin probe force microscopy, the density of the molecular frontier orbitals and the electric charge distribution within molecules can be mapped. Combining these techniques yields a high‐resolution tool for the identification and characterization of individual molecules. The single‐molecule sensitivity and the possibility of atom manipulation to induce chemical reactions with the tip of the microscope open up unique applications in chemistry, and differentiate scanning probe microscopy from conventional methods for molecular structure elucidation. Besides being an aid for challenging cases in natural product identification, atomic force microscopy has been shown to be a powerful tool for the investigation of on‐surface reactions and the characterization of radicals and molecular mixtures. Herein we review the progress that high‐resolution scanning probe microscopy with functionalized tips has made for molecular structure identification and characterization, and discuss the challenges it will face in the years to come.     

Polytype and Stacking Faults in the Li2CoSiO4 Li‐Ion Battery Cathode

Atomic‐resolution imaging of the crystal defects of cathode materials is crucial to understand their formation and the correlation between the structure, electrical properties, and electrode performance in rechargeable batteries. The polytype, a stable form of varied crystal structure with uniform chemical composition, holds promise to engineer electronic band structure in nanoscale homojunctions. 1 – 3 Analyzing the exact sites of atoms and the chemistry of the boundary in polytypes would advance our understanding of their formation and properties. Herein, the polytype and stacking faults in the lithium cobalt silicates are observed directly by aberration‐corrected scanning transmission electron microscopy. The atomic‐scale imaging allows clarification that the polytype is formed by stacking of two different close‐packed crystal planes in three‐dimensional space. The formation of the polytype was induced by Li–Co cation exchange, the transformation of one phase to the other, and their stacking. This finding provides insight into intrinsic structural defects in an important Li₂CoSiO₄ Li‐ion battery cathode.     

Revealing the Distribution of the Atoms within Individual Bimetallic Catalyst Nanoparticles

To be able to correlate the catalytic properties of nanoparticles with their structure, detailed knowledge about their make‐up on the atomic level is required. Herein, we demonstrate how atom‐probe tomography (APT) can be used to quantitatively determine the three‐dimensional distribution of atoms within a Au@Ag nanoparticle with near‐atomic resolution. We reveal that the elements are not evenly distributed across the surface and that this distribution is related to the surface morphology and residues from the particle synthesis.     

Diamond Quantum Devices in Biology

The currently available techniques for molecular imaging capable of reaching atomic resolution are limited to low temperatures, vacuum conditions, or large amounts of sample. Quantum sensors based on the spin‐dependent photoluminescence of nitrogen‐vacancy (NV) centers in diamond offer great potential to achieve single‐molecule detection with atomic resolution under ambient conditions. Diamond nanoparticles could also be prepared with implanted NV centers, thereby generating unique nanosensors that are able to traffic into living biological systems. Therefore, this technique might provide unprecedented access and insight into the structure and function of individual biomolecules under physiological conditions as well as observation of biological processes down to the quantum level with atomic resolution. The theory of diamond quantum sensors and the current developments from their preparation to sensing techniques have been critically discussed in this Minireview.     

Imaging the Atomic Position of Light Cations in a Porous Network and the Europium(III) Ion Exchange Capability by Aberration‐Corrected Electron Microscopy

In the present work, ETS‐10 microporous titanosilicate has been synthesized and its structure characterized by means of powder XRD and aberration corrected scanning transmission electron microscopy (C_s‐corrected STEM). For the first time, sodium ions have been imaged sitting inside the 7‐membered rings. The ion‐exchange capability has been tested by the inclusion of rare earth metals (Eu, Tb and Gd) to produce a luminescent material which has been studied by atomic‐resolution C_s‐corrected STEM. The data produced has allowed unambiguous imaging of light atoms in a microporous framework as well as determining the cationic metal positions for the first time, providing evidence of the importance of advanced electron microscopy methods for the study of the local environment of metals within zeolitic supports providing unique information of both systems (guest and support) at the same time.     

Ensemble modeling of very small ZnO nanoparticles

The detailed structural characterization of nanoparticles is a very important issue since it enables a precise understanding of their electronic, optical and magnetic properties. Here we introduce a new method for modeling the structure of very small particles by means of powder X-ray diffraction. Using thioglycerol-capped ZnO nanoparticles with a diameter of less than 3 nm as an example we demonstrate that our ensemble modeling method is superior to standard XRD methods like, e.g., Rietveld refinement. Besides fundamental properties (size, anisotropic shape and atomic structure) more sophisticated properties like imperfections in the lattice, a size distribution as well as strain and relaxation effects in the particles and-in particular-at their surface (surface relaxation effects) can be obtained. Ensemble properties, i.e., distributions of the particle size and other properties, can also be investigated which makes this method superior to imaging techniques like (high resolution) transmission electron microscopy or atomic force microscopy, in particular for very small nanoparticles. For the particles under study an excellent agreement of calculated and experimental X-ray diffraction patterns could be obtained with an ensemble of anisotropic polyhedral particles of three dominant sizes, wurtzite structure and a significant relaxation of Zn atoms close to the surface.     

Emerging Electron Microscopy Techniques for Probing Functional Interfaces in Energy Materials

Interfaces play a fundamental role in many areas of chemistry. However, their localized nature requires characterization techniques with high spatial resolution in order to fully understand their structure and properties. State‐of‐the‐art atomic resolution or in situ scanning transmission electron microscopy and electron energy‐loss spectroscopy are indispensable tools for characterizing the local structure and chemistry of materials with single‐atom resolution, but they are not able to measure many properties that dictate function, such as vibrational modes or charge transfer, and are limited to room‐temperature samples containing no liquids. Here, we outline emerging electron microscopy techniques that are allowing these limitations to be overcome and highlight several recent studies that were enabled by these techniques. We then provide a vision for how these techniques can be paired with each other and with in situ methods to deliver new insights into the static and dynamic behavior of functional interfaces.     

The Structure of Sub‐nm Platinum Clusters at Elevated Temperatures

Little is known about metallic clusters consisting merely of a dozen of atoms or even less, despite of their importance in catalysis and crystal nucleation. Scanning transmission electron microscopy (STEM) provides direct atomic structure information but has inherently suffered from limited time resolution. We employ fast dynamic STEM combined with a spatio‐temporal image denoising algorithm to explore the structure and stability of Pt clusters on carbon, which represents a highly relevant catalysis system. At room temperature, dynamic amorphous 2D structures are found, while above ≈300 °C, the clusters transform into a crystalline state. Our experimental and theoretical data reveal an unexpected strong trend of the crystalline clusters to exhibit the face‐centered cubic, bulk structure of Pt with cuboidal geometries being most prominent.     

Scanning tunneling microscopy on clean and adsorbate covered metal surfaces

The use of scanning tunneling microscopy (STM) for atomic scale characterization of clean and adsorbate covered (single-crystalline) metal surfaces is discussed. Topographic images reveal details on their periodic structure and on the atomic arrangement in the surface layer, and in particular on surface defects. The observation and characterization of individual adsorbate species gives access to the local electronic structure of the adsorption complex and to details of the chemical bond between substrate and adsorbate. Atomic resolution imaging opens new perspectives for the investigation of various surface processes such as surface diffusion, thin film growth or surface reactions.     

准二维无定形碳结构的制备和结构表征

从单层和少层的石墨烯出发,利用透射电子显微镜中的高能电子束辐照,可控地制备了准二维完全无定形和半无定形碳结构.用高分辨成像和相干的纳米区域电子衍射技术表征了样品结构在高能电子束辐照前后的变化.基于实验记录的电子衍射花样得到了样品的原子对分布函数.分析表明,在所制备的准二维无定形结构中,六元环不再是碳原子的主要排列方式,碳原子的各阶最近邻间距相对于完美石墨烯中的值有所偏离并趋向无序;同时还发现,锯齿型的碳链结构不易被破坏,并使得准二维无定形碳结构中还保留了短程有序和可达0.5nm的中程有序.     

Atomic structure of Beta-tantalum nanocrystallites.

The structural properties of beta-phase tantalum nanocrystallites prepared by room temperature magnetron sputter deposition on amorphous carbon substrates are investigated at atomic resolution. For these purposes spherical aberration-corrected high-resolution transmission electron microscopy is applied in tandem with the numerical retrieval of the exit-plane wavefunction as obtained from a through-focus series of experimental micrographs. We demonstrate that recent improvements in the resolving power of electron microscopes enable the imaging of the atomic structure of beta-tantalum with column spacings of solely 0.127 nm with directly interpretable contrast features. For the first time ever, we substantiate the existence of grain boundaries of 30 degrees tilt type in beta-Ta whose formation may be well explained by atomic agglomeration processes taking place during sputter deposition.     

Non‐metal Single‐Iodine‐Atom Electrocatalysts for the Hydrogen Evolution Reaction

Common‐metal‐based single‐atom catalysts (SACs) are quite difficult to design due to the complex synthesis processes required. Herein, we report a single‐atom nickel iodide (SANi‐I) electrocatalyst with atomically dispersed non‐metal iodine atoms. The SANi‐I is prepared via a simple calcination step in a vacuum‐sealed ampoule and subsequent cyclic voltammetry activation. Aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and synchrotron‐based X‐ray absorption spectroscopy are applied to confirm the atomic‐level dispersion of iodine atoms and detailed structure of SANi‐I. Single iodine atoms are found to be isolated by oxygen atoms. The SANi‐I is structural stable and shows exceptional electrocatalytic activity for the hydrogen evolution reaction (HER). In situ Raman spectroscopy reveals that the hydrogen adatom (H_ads) is adsorbed by a single iodine atom, forming the I‐H_ads intermediate, which promotes the HER process.     

High resolution photodetachment spectroscopy of negative ions via slow photoelectron imaging

A technique for high resolution anion photodetachment spectroscopy is presented that combines velocity map imaging and anion threshold photodetachment. This method, slow electron velocity-map imaging, provides spectral line widths of better than 1 meV. Spectra over a substantial range of electron kinetic energies are recorded in a single image, providing a dramatic reduction of data acquisition time compared to other techniques with comparable resolution. We apply this technique to atomic iodine and the van der Waals cluster I.CO2 as test systems, and then to the prereactive Cl.D2 complex where partially resolved structure assigned to hindered rotor motion is observed.     

Sub-angstrom atomic-resolution imaging from heavy atoms to light atoms.

John Cowley and his group at Arizona State University pioneered the use of transmission electron microscopy (TEM) for high-resolution imaging. Three decades ago they achieved images showing the crystal unit cell content at better than 4 angstroms resolution. Over the years, this achievement has inspired improvements in resolution that have enabled researchers to pinpoint the positions of heavy atom columns within the cell. More recently, this ability has been extended to light atoms as resolution has improved. Sub-angstrom resolution has enabled researchers to image the columns of light atoms (carbon, oxygen, and nitrogen) that are present in many complex structures. By using sub-angstrom focal-series reconstruction of the specimen exit surface wave to image columns of cobalt, oxygen, and lithium atoms in a transition metal oxide structure commonly used as positive electrodes in lithium rechargeable batteries, we show that the range of detectable light atoms extends to lithium. HRTEM at sub-angstrom resolution will provide the essential role of experimental verification for the emergent nanotech revolution. Our results foreshadow those to be expected from next-generation TEMs with CS-corrected lenses and monochromated electron beams.     

Depth-dependent imaging of individual dopant atoms in silicon.

We have achieved atomic-resolution imaging of single dopant atoms buried inside a crystal, a key goal for microelectronic device characterization, in Sb-doped Si using annular dark-field scanning transmission electron microscopy. In an amorphous material, the dopant signal is largely independent of depth, but in a crystal, channeling of the electron probe causes the image intensity of the atomic columns to vary with the depths of the dopants in each column. We can determine the average dopant concentration in small volumes, and, at low concentrations, the depth in a column of a single dopant. Dopant atoms can also serve as tags for experimental measurements of probe spreading and channeling. Both effects remain crucial even with spherical aberration correction of the probe. Parameters are given for a corrected Bloch-wave model that qualitatively describes the channeling at thicknesses 20 nm, but does not account for probe spreading at larger thicknesses. In thick samples, column-to-column coupling of the probe can make a dopant atom appear in the image in a different atom column than its physical position.     

Kernel projector matrices for leu1?zervamicin

By performing ab initio calculations on fragments of leu¹(SINGLEBOND)zervamicin, it is demonstrated that accurate wave functions can be obtained for this large structure by combining the results from the fragments. Input information consists of atomic coordinates as obtained, for example, from a crystal structure determination. The fragments are composed of a kernel of atoms surrounded by a chosen neighborhood of atoms. The entire molecule is divided into individual kernels and their neighborhoods are added for the individual fragment calculations on the basis of the distances of other atoms from the atoms in a kernel. The hydrated leu¹(SINGLEBOND)zervamicin is composed of 295 atoms which could be handled in full by Gaussian 94. The results of the fragment calculations were combined to provide an electron density distribution for the molecule. This distribution was compared with one that represents the distribution obtained from a calculation on the entire molecule at once. The clear implication of this study is that it is feasible to perform ab initio calculations on structures by the use of fragments. The time involved increases essentially linearly with complexity. © 1996 John Wiley & Sons, Inc.     

Single Cobalt Atoms with Precise N‐Coordination as Superior Oxygen Reduction Reaction Catalysts

A new strategy for achieving stable Co single atoms (SAs) on nitrogen‐doped porous carbon with high metal loading over 4 wt % is reported. The strategy is based on a pyrolysis process of predesigned bimetallic Zn/Co metal–organic frameworks, during which Co can be reduced by carbonization of the organic linker and Zn is selectively evaporated away at high temperatures above 800 °C. The spherical aberration correction electron microscopy and extended X‐ray absorption fine structure measurements both confirm the atomic dispersion of Co atoms stabilized by as‐generated N‐doped porous carbon. Surprisingly, the obtained Co‐N_x single sites exhibit superior ORR performance with a half‐wave potential (0.881 V) that is more positive than commercial Pt/C (0.811 V) and most reported non‐precious metal catalysts. Durability tests revealed that the Co single atoms exhibit outstanding chemical stability during electrocatalysis and thermal stability that resists sintering at 900 °C. Our findings open up a new routine for general and practical synthesis of a variety of materials bearing single atoms, which could facilitate new discoveries at the atomic scale in condensed materials.