Acidic Monosaccharides become Incorporated into Calcite Single Crystals**

Carbohydrates, along with proteins and peptides, are known to represent a major class of biomacromolecules involved in calcium carbonate biomineralization. However, in spite of multiple physical and biochemical characterizations, the explicit role of saccharide macromolecules (long chains of carbohydrate molecules) in mineral deposition is not yet understood. In this study, we investigated the influence of two common acidic monosaccharides (MSs), the two simplest forms of acidic carbohydrates, namely glucuronic and galacturonic acids, on the formation of calcite crystals in vitro. We show here that the size, morphology, and microstructure of calcite crystals are altered when they are grown in the presence of these MSs. More importantly, these MSs were found to become incorporated into the calcite crystalline lattice and induce anisotropic lattice distortions, a phenomenon widely studied for other biomolecules related to CaCO₃ biomineralization, but never before reported in the case of single MSs. Changes in the calcite lattice induced by MSs incorporation were precisely determined by high-resolution synchrotron powder X-ray diffraction. We believe that the results of this research may deepen our understanding of the interaction of saccharide polymers with an inorganic host and shed light on the implications of carbohydrates for biomineralization processes.     

Exerting Spatial Control During Nanoparticle Occlusion within Calcite Crystals

In principle, nanoparticle occlusion within crystals provides a straightforward and efficient route to make new nanocomposite materials. However, developing a deeper understanding of the design rules underpinning this strategy is highly desirable. In particular, controlling the spatial distribution of the guest nanoparticles within the host crystalline matrix remains a formidable challenge. Herein, we show that the surface chemistry of the guest nanoparticles and the [Ca²⁺] concentration play critical roles in determining the precise spatial location of the nanoparticles within calcite crystals. Moreover, in situ studies provide important mechanistic insights regarding surface‐confined nanoparticle occlusion. Overall, this study not only provides useful guidelines for efficient nanoparticle occlusion, but also enables the rational design of patterned calcite crystals using model anionic block copolymer vesicles.     

Direct Observation of the Distribution of Gelatin in Calcium Carbonate Crystals by Super‐Resolution Fluorescence Microscopy

Biological organic–inorganic hybrid materials often achieve excellent properties and provide inspiration for the design of advanced materials. The organic phase plays a key role in determining the properties of biogenic materials, and the spatial arrangement of organic and inorganic phases provides direct evidence for interaction between the two phases. Super‐resolution fluorescence microscopy was used to visualize the gelatin distribution in two different crystalline polymorphs of calcium carbonate (vaterite and calcite) and to investigate the process by which gelatin is excluded from the crystals. The results demonstrated that gelatin is distributed through vaterite microspheres in the form of nanoparticles, whereas it tends to accumulate on the edges of the calcite rhombohedra.     

Chiral Side Groups Trigger Second Harmonic Generation Activity in 3D Octupolar Bipyrimidine‐Based Organic Liquid Crystals

The design of efficient noncentrosymmetric materials remains the ultimate goal in the field of organic second‐order nonlinear optics. Unlike inorganic crystals currently used in second‐order nonlinear optical applications, organic materials are an attractive alternative owing to their fast electro‐optical response and processability, but their alignment into noncentrosymmetric film remains challenging. Here, symmetry breaking by judicious functionalization of 3D organic octupoles allows the emergence of multifunctional liquid crystalline chromophores which can easily be processed into large, flexible, thin, and self‐oriented films with second harmonic generation responses competitive to the prototypical inorganic KH₂PO₄ crystals. The liquid‐crystalline nature of these chiral organic films also permits the modulation of the nonlinear optical properties owing to the sensitivity of the supramolecular organization to temperature, leading to the development of tunable macroscopic materials.     

Tailored composite polymer–metal nanoparticles by miniemulsion polymerization and thiol‐ene functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer–metal nanoparticle materials. The procedure produces well‐defined composite structures consisting of gold, silver, or MnFe₂O₄ nanoparticles (～10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (～100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol‐ene chemistry is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1594–1606, 2010     

Assessing the synergy effect of additive and matrix on single-crystal growth: Morphological revolution resulted from gel-mediated enhancement on CIT-calcite interaction

CIT additives are active in crystal morphology modification at relatively high concentration. Once agarose gel is simultaneously introduced, the curved morphological feature of calcite crystal emerges at a much lower concentration of CIT additives.     

Visualizing the toughening origins of gel-grown calcite single-crystal composites

The mechanical properties of gel-grown calcite single-crystal composites can be modified by incorporation of guest materials including agarose gel fiber, MWCNTs and GO. The in-situ observation of the crystal deformation suggests that the guest incorporation toughens the single-crystal host by the shielding effect of nanofiber on crack-bridging at nanoscale.     

Synthesis,Properties, and Evolution Mechanism of Morphology Tunable InPO4 Crystals

In the synthesis of InPO₄ crystals, using F127 [(EO)₁₀₆(PO)₇₀(EO)₁₀₆] as a structure‐directing template, a morphology tunable progress was observed during the crystal evolution. By verifying the initial pH from 1.0 to 12.0, the morphology is evolved from single crystal, through sub‐micro crystallites, and finally to crystalline nanoparticles. The most influential factors in the morphology evolution are the initial pH level, the participation of surfactant‐template F127, and the change in pH during the reaction.     

Role of Capping Ligands on the Nanoparticles in the Modulation of Properties of a Hybrid Matrix of Nanoparticles in a 2D Film and in a Supramolecular Organogel

We incorporate various gold nanoparticles (AuNPs) capped with different ligands in two‐dimensional films and three‐dimensional aggregates derived from N‐stearoyl‐L ‐alanine and N‐lauroyl‐L ‐alanine, respectively. The assemblies of N‐stearoyl‐L ‐alanine afforded stable films at the air–water interface. More compact assemblies were formed upon incorporation of AuNPs in the air–water interface of N‐stearoyl‐L ‐alanine. We then examined the effects of incorporation of various AuNPs functionalized with different capping ligands in three‐dimensional assemblies of N‐lauroyl‐L ‐alanine, a compound that formed a gel in hydrocarbons. The profound influence of nanoparticle incorporation into physical gels was evident from evaluation of various microscopic and bulk properties. The interaction of AuNPs with the gelator assembly was found to depend critically on the capping ligands protecting the Au surface of the gold nanoparticles. Transmission electron microscopy (TEM) showed a long‐range directional assembly of certain AuNPs along the gel fibers. Scanning electron microscopy (SEM) images of the freeze‐dried gels and nanocomposites indicate that the morphological transformation in the composite microstructures depends significantly on the capping agent of the nanoparticles. Differential scanning calorimetry (DSC) showed that gel formation from sol occurred at a lower temperature upon incorporation of AuNPs having capping ligands that were able to align and noncovalently interact with the gel fibers. Rheological studies indicate that the gel–nanoparticle composites exhibit significantly greater viscoelasticity compared to the native gel alone when the capping ligands are able to interact through interdigitation into the gelator assembly. Thus, it was possible to define a clear relationship between the materials and the molecular‐level properties by means of manipulation of the information inscribed on the NP surface.     

Hydrogels coupled with self-assembled monolayers: an in vitro matrix to study calcite biomineralization

This paper describes the control of the nucleation and growth of calcite crystals by a matrix composed of an agarose hydrogel on top of a carboxylate-terminated self-assembled monolayer (SAM). The design of this matrix is based upon examples from biomineralization in which hydrogels are coupled with functionalized, organic surfaces to control, simultaneously, crystal morphology and orientation. In the synthetic system, calcite crystals nucleate from the (012) plane (the same plane that is observed in solution growth). The aspect ratio (length/width) of the crystals decreases from 2.1 +/- 0.22 in solution to 1.2 +/- 0.04 in a 3 w/v % agarose gel. One possible explanation for the change in morphology is the incorporation of gel fibers inside of the crystals during the growth process. Etching of the gel-grown crystals with deionized water reveals an interpenetrating network of gel fibers and crystalline material. This work begins to provide insight into why organisms use hydrogels to control the growth of crystals.     

Ternary Hybrid Perovskite Solid Solution Single Crystals: Growth,Composition Determination and Phase Stability in Highly Moist Atmosphere

Ternary hybrid perovskite solid solutions have shown superior optoelectronic properties and better stability than their ABX₃ simple perovskite counterparts under ambient conditions. However, crystal growth and identification of the accurate composition of these complex crystalline compounds remain challenging, and their stability under extreme conditions such as in highly moist atmosphere is unknown. Herein, large-size (up to 2 cm) single crystals of ternary perovskite 0.80FAPbI₃ ⋅ x′FAPbBr₃ ⋅ y′CsPbI₃ (x′+y′=0.20) are grown. An elemental analysis method based on wavelength dispersive X-ray fluorescence is proposed to determine their accurate compositions. Among these single crystals, the composition with y′=0.12 shows the best moisture stability at 90 % relative humidity for 15 days. Other components with richer or poorer Cs⁺ ions undergo different phase segregation behaviours. The performance and stability of photodetectors based on these single crystals are tested. This work offers a deeper insight into phase stability of ternary hybrid perovskite solid solution crystals in highly moist atmosphere.     

Topochemical Polymerization of 1,3‐Diene Monomers and Features of Polymer Crystals as Organic Intercalation Materials

From the viewpoint of controlled polymer synthesis, topochemical polymerization based on crystal engineering is very useful for controlling not only the primary chain structures but also the higher‐order structures of the crystalline polymers. We found a new type of topochemical polymerization of muconic and sorbic acid derivatives to give stereoregular and high‐molecular weight polymers under photo‐, X‐ray, and γ‐ray irradiation of the monomer crystals. In this article, we describe detailed features and the mechanism of the topochemical polymerization of diethyl‐(Z,Z)‐muconate as well as of various alkylammonium derivatives of muconic and sorbic acids, which are 1,3‐diene mono‐ and dicarboxylic acid derivatives, to control the stereochemical structures of the polymers. The polymerization reactivity of these monomers in the crystalline state and the stereochemical structure of the polymers produced are discussed based on the concept of crystal engineering, which is a useful method to design and control the reactivity, structure, and properties of organic solids. The reactivity of the topochemical polymerization is determined by the monomer crystal structure, i.e. the monomer molecular arrangement in the crystals. Polymer crystals derived from topochemical polymerization have a high potential as new organic crystalline materials for various applications. Organic intercalation using the polymer crystals prepared from alkylammonium muconates and sorbates is also described.     

Functional delivery vehicle of organic nanoparticles in inorganic crystals

Encapsulation of bioactive substances for extended shelf life and controlled, targeted release is critical for their applications in food and drug delivery. Here, a new method has been developed to encapsulate bioactive molecules in the crystal composites, showing greatly enhanced stability and unique pH-triggered response. Chlorophyll, a model bioactive, is first loaded in shellac nanoparticles via co-precipitation with a high encapsulation efficiency, and then the chlorophyll-loaded nanoparticles are incorporated into calcite crystals grown from a gel media containing the nanoparticles. Under the protection of shellac nanoparticles and calcite crystals, chlorophyll shows excellent stability even under light. Encapsulated chlorophyll could only be released by first dissolving the calcite crystals under acidic condition and then dissolving the shellac nanoparticles under alkaline condition. The unique pH-triggered release mimics the pH change from acidic in the stomach to alkaline in the intestine and is thus well suited for controlled, targeted intestinal release. This work suggests that the crystal composites are an ideal delivery vehicle for the functional design of bioactive molecules.     

Enhanced Photoactivity from Single‐Crystalline SrTaO2N Nanoplates Synthesized by Topotactic Nitridation

There are few methods yielding oxynitride crystals with defined shape, yet shape‐controlled crystals often give enhanced photoactivity. Herein, single‐crystalline SrTaO₂N nanoplates and polyhedra are achieved selectively. Central to these synthetic advances is the crystallization pathways used, in which single‐crystalline SrTaO₂N nanoplates form by topotactic nitridation of aerosol‐prepared Sr₂Ta₂O₇ nanoplates and SrTaO₂N polyhedra form by flux‐assisted nitridation of the nanoplates. Evaluation of these materials for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) showed improved performance for the SrTaO₂N nanoplates, with a record apparent quantum efficiency (AQE) of 6.1 % for OER compared to the polyhedra (AQE: 1.6 %) and SrTaO₂N polycrystals (AQE: 0.6 %). The enhanced performance from the nanoplates arises from their morphology and lower defect density. These results highlight the importance of developing new synthetic routes to high quality oxynitrides.     

Preparation and Charactrization of Fibrous Crystals of Boron-containing MTW-type Zeolite

Fibrous crystals of boron-containing MTW-type zeolite have been hydrothermally synthesized in B2O3-SiO2-HF-H2O gel system at 170℃ in 20 to 28d by using 1,4-diazabicyclo[2,2,2]octane (DABCO) and methylamine as the co-template, and characterized with XRD, SEM, TEM, HRTEM and SAED. The results of characterizations show that B atoms are incorporated into the zeolite framework as tetrahedron of B(OSi)4. The fibrous single crystals of 5-50μm in length and 100-500nm in width inter-grow along the c-axis of the zeolite, and the one dimension 12 oxygen ring channels are perpendicular to the fibber axis.     

Chemical Engineering of Photoactivity in Heterometallic Titanium–Organic Frameworks by Metal Doping

We report a new family of titanium–organic frameworks that enlarges the limited number of crystalline, porous materials available for this metal. They are chemically robust and can be prepared as single crystals at multi‐gram scale from multiple precursors. Their heterometallic structure enables engineering of their photoactivity by metal doping rather than by linker functionalization. Compared to other methodologies based on the post‐synthetic metallation of MOFs, our approach is well‐fitted for controlling the positioning of dopants at an atomic level to gain more precise control over the band‐gap and electronic properties of the porous solid. Changes in the band‐gap are also rationalized with computational modelling and experimentally confirmed by photocatalytic H₂ production.     

Amino Acid Assisted Incorporation of Dye Molecules within Calcite Crystals

Biomineralisation processes invariably occur in the presence of multiple organic additives, which act in combination to give exceptional control over structures and properties. However, few synthetic studies have investigated the cooperative effects of soluble additives. This work addresses this challenge and focuses on the combined effects of amino acids and coloured dye molecules. The experiments demonstrate that strongly coloured calcite crystals only form in the presence of Brilliant Blue R (BBR) and four of the seventeen soluble amino acids, as compared with almost colourless crystals using the dye alone. The active amino acids are identified as those which themselves effectively occlude in calcite, suggesting a mechanism where they can act as chaperones for individual molecules or even aggregates of dyes molecules. These results provide new insight into crystal–additive interactions and suggest a novel strategy for generating materials with target properties.     

Two‐Dimensional Fullerene Assembly from an Exfoliated van der Waals Template

Two‐dimensional (2D) materials are commonly prepared by exfoliating bulk layered van der Waals crystals. The creation of synthetic 2D materials from bottom‐up methods is an important challenge as their structural flexibility will enable chemists to tune the materials properties. A 2D material was assembled using C₆₀ as a polymerizable monomer. The C₆₀ building blocks are first assembled into a layered solid using a molecular cluster as structure director. The resulting hierarchical crystal is used as a template to polymerize its C₆₀ monolayers, which can be exfoliated down to 2D crystalline nanosheets. Derived from the parent template, the 2D structure is composed of a layer of inorganic cluster, sandwiched between two monolayers of polymerized C₆₀. The nanosheets can be transferred onto solid substrates and depolymerized by heating. Electronic absorption spectroscopy reveals an optical gap of 0.25 eV, narrower than that of the bulk parent crystalline solid.     

Functional delivery vehicle of organic nanoparticles in inorganic crystals

This work has developed a functional delivery vehicle of an organic-inorganic hybrid consisted of organic nanoparticles in inorganic crystals, which greatly improves the stability of the bioactive and implements a unique pH-triggered release.     

Core–Shell Crystals of Porous Organic Cages

The first examples of core–shell porous molecular crystals are described. The physical properties of the core–shell crystals, such as surface hydrophobicity, CO₂ /CH₄ selectivity, are controlled by the chemical composition of the shell. This shows that porous core–shell molecular crystals can exhibit synergistic properties that out‐perform materials built from the individual, constituent molecules.