Pentacoordinate Phosphorus in a High‐Pressure Polymorph of Phosphorus Nitride Imide P4N6(NH)

Coordination numbers higher than usual are often associated with superior mechanical properties. In this contribution we report on the synthesis of the high‐pressure polymorph of highly condensed phosphorus nitride imide P₄N₆(NH) representing a new framework topology. This is the first example of phosphorus in trigonal‐bipyramidal coordination being observed in an inorganic network structure. We were able to obtain single crystals and bulk samples of the compound employing the multi‐anvil technique. γ‐P₄N₆(NH) has been thoroughly characterized using X‐ray diffraction, solid‐state NMR and FTIR spectroscopy. The synthesis of γ‐P₄N₆(NH) gives new insights into the coordination chemistry of phosphorus at high pressures. The synthesis of further high‐pressure phases with higher coordination numbers exhibiting intriguing physical properties seems within reach.     

A High‐Pressure Polymorph of Phosphorus Oxonitride with the Coesite Structure

The chemical and physical properties of phosphorus oxonitride (PON) closely resemble those of silica, to which it is isosteric. A new high‐pressure phase of PON is reported herein. This polymorph, synthesized by using the multianvil technique, crystallizes in the coesite structure. This represents the first occurrence of this very dense network structure outside of SiO₂. Phase‐pure coesite PON (coe‐PON) can be synthesized in bulk at pressures above 15 GPa. This compound was thoroughly characterized by means of powder X‐ray diffraction, DFT calculations, and FTIR and MAS NMR spectroscopy, as well as temperature‐dependent diffraction. These results represent a major step towards the exploration of the phase diagram of PON at very high pressures and the possibly synthesis of a stishovite‐type PON containing hexacoordinate phosphorus.     

Rare‐Earth‐Metal Nitridophosphates through High‐Pressure Metathesis

Developing a synthetic method to target an broad spectrum of unknown phases can lead to fascinating discoveries. The preparation of the first rare‐earth‐metal nitridophosphate LiNdP₄N₈ is reported. High‐pressure solid‐state metathesis between LiPN₂ and NdF₃ was employed to yield a highly crystalline product. The in situ formed LiF is believed to act both as the thermodynamic driving force and as a flux to aiding single‐crystal formation in dimensions suitable for crystal structure analysis. Magnetic properties stemming from Nd³⁺ ions were measured by SQUID magnetometry. LiNdP₄N₈ serves as a model system for the exploration of rare‐earth‐metal nitridophosphates that may even be expanded to transition metals. High‐pressure metathesis enables the systematic study of these uncharted regions of nitride‐based materials with unprecedented properties.     

High‐Pressure Synthesis and Structural Investigation of H3P8O8N9: A New Phosphorus(V) Oxonitride Imide with an Interrupted Framework Structure

The first crystalline phosphorus oxonitride imide H₃P₈O₈N₉ (=P₈O₈N₆(NH)₃) has been synthesized under high‐pressure and high‐temperature conditions. To this end, a new, highly reactive phosphorus oxonitride imide precursor compound was prepared and treated at 12 GPa and 750 °C by using a multianvil assembly. H₃P₈O₈N₉ was obtained as a colorless, microcrystalline solid. The crystal structure of H₃P₈O₈N₉ was solved ab initio by powder X‐ray diffraction analysis, applying the charge‐flipping algorithm, and refined by the Rietveld method (C2/c (no. 15), a=1352.11(7), b=479.83(3), c=1820.42(9) pm, β=96.955(4)°, Z=4). H₃P₈O₈N₉ exhibits a highly condensed (κ=0.47), 3D, but interrupted network that is composed of all‐side vertex‐sharing (Q⁴) and only threefold‐linking (Q³) P(O,N)₄ tetrahedra in a Q⁴/Q³ ratio of 3:1. The structure, which includes 4‐ring assemblies as the smallest ring size, can be subdivided into alternating open‐branched zweier double layers {oB,${2{{2\hfill \atop \infty \hfill}}}$ }[²P₃(O,N)₇] and layers containing pairwise‐linked Q³ tetrahedra parallel (001). Information on the hydrogen atoms in H₃P₈O₈N₉ was obtained by 1D ¹H MAS, 2D homo‐ and heteronuclear (together with ³¹P) correlation NMR spectroscopy, and a ¹H spin‐diffusion experiment with a hard‐pulse sequence designed for selective excitation of a single peak. Two hydrogen sites with a multiplicity ratio of 2:1 were identified and thus the formula of H₃P₈O₈N₉ was unambiguously determined. The protons were assigned to Wyckoff positions 8f and 4e, the latter located within the Q³ tetrahedra layers.     

Oxonium Ions Substituting Cesium Ions in the Structure of the New High‐Pressure Borate HP‐Cs1−x(H3O)xB3O5 (x=0.5–0.7)

The new high‐pressure borate HP‐Cs_1?x(H₃O)_xB₃O₅ (x=0.5–0.7) was synthesized under high‐pressure/high‐temperature conditions of 6 GPa/900 °C in a Walker‐type multianvil apparatus. The compound crystallizes in the monoclinic space group C2/c (Z=8) with the parameters a=1000.6(2), b=887.8(2), c=926.3(2) pm, β=103.1(1)°, V=0.8016(3) nm³, R1=0.0452, and wR2=0.0721 (all data). The boron–oxygen network is analogous to those of the compounds HP‐MB₃O₅, (M=K, Rb) and exhibits all three structural motifs of borates—BO₃ groups, corner‐sharing BO₄ tetrahedra, and edge‐sharing BO₄ tetrahedra—at the same time. Channels inside the boron–oxygen framework contain the cesium and oxonium ions, which are disordered on a specific site. Estimating the amount of hydrogen by solid‐state NMR spectroscopy and X‐ray diffraction led to the composition HP‐Cs_1?x(H₃O)_xB₃O₅ (x=0.5–0.7), which implies a nonzero phase width.     

Ba3P5N10Br:Eu2+: A Natural‐White‐Light Single Emitter with a Zeolite Structure Type

Illumination sources based on phosphor‐converted light emitting diode (pcLED) technology are nowadays of great relevance. In particular, illumination‐grade pcLEDs are attracting increasing attention. Regarding this, the application of a single warm‐white‐emitting phosphor could be of great advantage. Herein, we report the synthesis of a novel nitridophosphate zeolite Ba₃P₅N₁₀Br:Eu²⁺. Upon excitation by near‐UV light, natural‐white‐light luminescence was detected. The synthesis of Ba₃P₅N₁₀Br:Eu²⁺ was carried out using the multianvil technique. The crystal structure of Ba₃P₅N₁₀Br:Eu²⁺ was solved and refined by single‐crystal X‐ray diffraction analysis and confirmed by Rietveld refinement and FTIR spectroscopy. Furthermore, spectroscopic luminescence measurements were performed. Through the synthesis of Ba₃P₅N₁₀Br:Eu²⁺, we have shown the great potential of nitridophosphate zeolites to serve as high‐performance luminescence materials.     

Continuous Flow Organic Synthesis under High‐Temperature/Pressure Conditions

Microreactor technology and continuous flow processing in general are key features in making organic synthesis both more economical and environmentally friendly. When preformed under a high‐temperature/pressure process intensification regime many transformations originally not considered suitable for flow synthesis owing to long reaction times can be converted into high‐speed flow chemistry protocols that can operate at production‐scale quantities. This Focus Review summarizes the state of the art in high‐temperature/pressure microreactor technology and provides a survey of successful applications of this technique from the recent synthetic organic chemistry literature.     

MH4P6N12 (M=Mg,Ca): New Imidonitridophosphates with an Unprecedented Layered Network Structure Type

Isotypic imidonitridophosphates MH₄P₆N₁₂ (M=Mg, Ca) have been synthesized by high‐pressure/high‐temperature reactions at 8 GPa and 1000 °C starting from stoichiometric amounts of the respective alkaline‐earth metal nitrides, P₃N₅, and amorphous HPN₂. Both compounds form colorless transparent platelet crystals. The crystal structures have been solved and refined from single‐crystal X‐ray diffraction data. Rietveld refinement confirmed the accuracy of the structure determination. In order to quantify the amounts of H atoms in the respective compounds, quantitative solid‐state ¹H NMR measurements were carried out. EDX spectroscopy confirmed the chemical compositions. FTIR spectra confirmed the presence of NH groups in both structures. The crystal structures reveal an unprecedented layered tetrahedral arrangement, built up from all‐side vertex‐sharing PN₄ tetrahedra with condensed dreier and sechser rings. The resulting layers are separated by metal atoms.     

Segregation into Layers: A General Problem for Structural Instability under Pressure,Exemplified by SnH4

When a molecular compound is thermodynamically unstable (but kinetically persistent) with respect to the elements, structures that contain segregated layers of the elements may be favored at moderate pressures, as a compromise between the potential stability of novel electronic configurations and decomposition into the elements (or other stable compounds). We use stannane, SnH₄, to approach this quite general problem theoretically, since the heat of formation of SnH₄ is so positive. Our ground‐state DFT searches for optimal structures begin with slabs formed from 1–4 layers of tin atoms in the β‐Sn and bcc configurations, and also slabs of molecular hydrogen or hydrogen atoms, preserving the overall SnH₄ stoichiometry. As argued, segregated layers are an important structural feature in the lower‐ and moderate‐pressure regime (0 and 50 GPa). By 140 GPa (V/V₀=0.21) the coordination of tin and hydrogen increases and the slabs disappear, as judged from the optimized structures.     

ChemInform Abstract: Pentacoordinate Phosphorus in a High-Pressure Polymorph of Phosphorus Nitride Imide P4N6(NH).

The title γ-P₄N₆(NH) polymorph is obtained by high-temperature high-pressure synthesis using P₃N₅ and NH₄Cl in the molar ratio of 4:1 (multianvil cell, 14 GPa, 1200 °C, 3 h).     

β‐Ca3N2, a Metastable Nitride in the System Ca–N

A new page in the phase book : The metastable nitride β‐Ca₃N₂, the synthesis, crystal structure (see picture), and physical properties of which are reported, is an isotype of corundum (α‐Al₂O₃). Vacancies in the crystal structure of β‐Ca₃N₂ are discussed by using full‐potential local orbital methods and taking into account both the physical properties and the density of states.

     

High‐Temperature Chlorination‐Reduction Sequence for the Preparation of Silicon Hydride Modified Silica Surfaces

A general method for the functionalization of silica surfaces with silicon hydride (Si–H) groups is described for four different preparations of silica. The silica surface is reduced in a two‐step chlorination–reduction procedure within a simple gas‐flow system at high temperatures. After initial dehydroxylation of the silica surface, silicon chloride groups are formed by the reaction with thionyl chloride. The chlorination activates otherwise inaccessible surface siloxane moieties. A high silicon–hydride surface concentration results from the subsequent reduction of the chlorinated surface with hydrogen. The physical properties of the resulting silica are analyzed using scanning electron microscopy, as well as dynamic light scattering and Brunauer–Emmet–Teller measurements. The chlorination–reduction sequence has no significant impact on the structure, surface area and mesopore size of the silica materials used. The surface of the materials is characterized by diffuse reflectance infrared Fourier transform (DRIFT) and ²⁹Si CP/MAS NMR spectroscopy. The silicon–hydride groups are mostly of the ‐type. The use of high temperatures (>800 °C) results in the condensation of internal and surface silanol groups. Therefore, materials with both a fully condensed silica matrix as well as a surface free of silanol groups are obtained. The materials are ideal precursors for further molecular silica surface modification, as demonstrated with a ferrocene derivative.     

Synthesis of Stoichiometric and Bulk CrN through a Solid‐State Ion‐Exchange Reaction

Chromium mononitride (CrN) exhibits interesting magnetic, structural, and electronic properties for technological applications. Experimental reports on these properties are often inconsistent owing to differences in the degree of nonstoichiometry in CrN_x. To date, the preparation of bulk and stoichiometric CrN has been challenging; most products are in the form of a thin film produced by non‐equilibrium processes, and are often nonstoichiometric and poorly crystallized. In this work, we formulated a solid‐state ion‐exchange route for the synthesis of CrN under high pressure. The final CrN product is phase‐pure, stoichiometric, and well‐crystallized in the bulk form. Near‐stoichiometric and well‐crystallized CrN can be synthesized using the same route at atmospheric pressure, making massive and industrial‐scale production technologically feasible. The successful synthesis of stoichiometric and bulk CrN is expected to open new opportunities in diverse areas of fundamental research.