Carboxylate‐Driven Supramolecular Assemblies of Protonated meso‐Aryl‐Substituted Dipyrrolylpyrazoles

Dipyrrolylpyrazole (dpp) derivatives possessing an aryl ring at the pyrazole 4‐position were synthesized. Upon protonation, modified dpp derivatives formed a variety of assembled structures through complexation with carboxylates, as observed by single‐crystal X‐ray and synchrotron XRD analyses. In particular, the complexation of protonated dpp species possessing long alkyl chains with dicarboxylates resulted in highly ordered assembled structures, the packing modes of which as lamellar structures were controlled by the lengths of the spacer units between two carboxylate moieties. The charge‐carrier transporting properties of the solid materials were also controlled by bound anions, including dicarboxylates.     

Supramolecular Polymerization Promoted and Controlled through Self‐Sorting

A new method in which supramolecular polymerization is promoted and controlled through self‐sorting is reported. The bifunctional monomer containing p‐phenylene and naphthalene moieties was prepared. Supramolecular polymerization is promoted by selective recognition between the p‐phenylene group and cucurbit[7]uril (CB[7]), and 2:1 complexation of the naphthalene groups with cucurbit[8]uril (CB[8]). The process can be controlled by tuning the CB[7] content. This development will enrich the field of supramolecular polymers with important advances towards the realization of molecular‐weight and structural control.     

Micro‐ and Nanometer‐Scale Porous,Fibrous, and Sheet Architectures Constructed by Supramolecular Assemblies of Dipyrrolyldiketones

X‐ray analysis of some 1,3‐dipyrrolyl‐1,3‐propanediones synthesized from pyrroles and malonyl chloride derivatives revealed 1D supramolecular networks formed by N? H???O?C interactions in the solid state. Micro‐ and nanometer‐scale morphologies of porous, fibrous, and sheet structures were fabricated by hydrogen‐bonding interactions and determined by fine‐tuning the substituents and the solvents used. Of the unique polymorphs, ordered 2D lamellar sheet structures of the derivatives with long alkyl chains (C₁₆H₃₃, C₁₄H₂₉, and so on) were constructed by van der Waals hydrophobic effects between aliphatic chains as well as hydrogen bonding.     

Supramolecular Proteoglycan Aggregate Mimics: Cyclodextrin‐Assisted Biodegradable Polymer Assemblies for Electrostatic‐Driven Drug Delivery

Self‐assembled, noncovalent polymeric biodegradable materials mimicking proteoglycan aggregates were synthesized from inclusion complexes of cationic surfactants with γ‐cyclodextrin and the natural anionic polymer hyaluronan. The amorphous structure of this ternary system was proven by X‐ray diffraction and thermal analysis. Light‐scattering measurements showed that there was a competition between hyaluronic acid and the surfactant for the cyclodextrin cavity. These self‐assembled supramolecular matrices were loaded with both hydrophilic and lipophilic drug substances for dissolution studies. The release of the entrapped drugs was found to be controlled by cations in the surrounding media and by biodegradation. Slow drug release in an ion‐free medium became faster in physiological salt solution in which the macroscopic polymer matrix was disassembled. In contrast, the enzymatic degradation of hyaluronan was hindered in the polymeric matrix. The supramolecular systems consisting of γ‐cyclodextrin as a macrocyclic host, a cationic surfactant guest, and hyaluronic acid as the anionic polymer electrostatically cross‐linked by the inclusion complex of the first two was found to be a novel drug‐delivery system for the controlled release of traditional drugs such as curcumin and ketotifen and proteins such as bovine serum albumin.     

Cucurbituril‐Modulated Supramolecular Assemblies: From Cyclic Oligomers to Linear Polymers

Employing bis(p‐sulfonatocalix[4]arenes) (bisSC4A) and N′,N′′hexamethylenebis(1‐methyl‐4,4′‐bipyridinium) (HBV⁴⁺) as monomer building blocks, the assembly morphologies can be modulated by cucurbit[n]uril (CB[n]) (n=7, 8), achieving the interesting topological conversion from cyclic oligomers to linear polymers. The binary supramolecular assembly fabricated by HBV⁴⁺ and bisSC4A units, forms an oligomeric structure, which was characterized by NMR spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), isothermal titration calorimetry (ITC), and gel permeation chromatography (GPC) experiments. The ternary supramolecular polymer participated by CB[8] is constructed on the basis of host–guest interactions by bisSC4A and the [2]pseudorotaxane HBV⁴⁺@CB[8], which is characterized by means of AFM, DLS, NMR spectroscopy, thermogravimetric analysis (TGA), UV/Vis spectroscopy, and elemental analysis. CB[n] plays vital roles in rigidifying the conformation of HBV⁴⁺, and reinforcing the host–guest inclusion of bisSC4A with HBV⁴⁺, which prompts the formation of a linear polymer. Moreover, the CB[8]‐participated ternary assembly could disassemble into the molecular loop HBV²⁺@CB[8] and free bisSC4A after reduction of HBV⁴⁺ to HBV²⁺, whereas the CB[7]‐based assembly remained unchanged after the reduction. CB[8] not only controlled the topological conversion of the supramolecular assemblies, but also improved the redox‐responsive assembly/disassembly property practically.     

STM Insight into Hydrogen‐Bonded Bicomponent 1 D Supramolecular Polymers with Controlled Geometries at the Liquid–Solid Interface

Bicomponent supramolecular polymers , consisting of two alternating molecules bridged through six H‐bonds, are observed by STM at the solid–liquid interface. Control of the geometry of the 1D architecture was obtained by using two different connecting molecules with different conformational rigidity, affording either linear (see picture, left) or zigzag (right) motifs.

     

pH‐Regulated Selectivity in Supramolecular Polymerizations: Switching between Co‐ and Homopolymers

A strategy is presented to regulate the selectivity in aqueous supramolecular polymerizations by changes in pH. In neutral buffered conditions, oppositely charged phenylalanine‐based dendritic peptide amphiphiles self‐assemble into (A?B)_n alternating copolymers of low polydispersity when mixed in a 1:1 comonomer feed ratio. Via pH switch of the glutamic acid and lysine side chains, attractive Coulomb interactions in the coassembled materials are screened and selective polymerization occurs to form (A)_n homopolymers of the acidic comonomer at low pH and (B)_n homopolymers of the basic comonomer at high pH, while the complementary comonomer is released during the transition. Reversible switching is demonstrated between these three different polymeric states, which were characterized by CD and fluorescence spectroscopy, using a peptide based minimalistic fluorophore/quencher pair, and transmission electron microscopy.     

Self‐Assembly of Tyrosine into Controlled Supramolecular Nanostructures

In the context of designing novel amino acid nanostructures, the capacity of tyrosine alone to form well‐ordered structures under different conditions was explored. It was observed that Tyr can self‐assemble into well‐defined morphologies when deposited onto surfaces for transmission electron microscopy, atomic force microscopy, and scanning electron microscopy. The influence of various parameters that can modulate the self‐assembly process, including concentration of the amino acid, aging time, and solvent, was studied. Different supramolecular architectures, including nanoribbons, branched structures, and fern‐like arrangements were also observed.     

Non‐Covalent Interactions in Supramolecular Assemblies Investigated with Electron Spectroscopies

A new view: A picture of the different non‐covalent interactions relevant for the self‐assembly of organic layers and their spectroscopic fingerprints is provided (see figure). In particular, state‐of‐the‐art spectroscopic measurements are performed for supramolecular assemblies, comparing the electronic structure of single‐component layers with that of binary organic layers.

     

Multicomponent Supramolecular Systems: Self‐Organization in Coordination‐Driven Self‐Assembly

The self‐organization of multicomponent supramolecular systems involving a variety of two‐dimensional (2 D) polygons and three‐dimensional (3 D) cages is presented. Nine self‐organizing systems, SS₁ – SS₉ , have been studied. Each involves the simultaneous mixing of organoplatinum acceptors and pyridyl donors of varying geometry and their selective self‐assembly into three to four specific 2 D (rectangular, triangular, and rhomboid) and/or 3 D (triangular prism and distorted and nondistorted trigonal bipyramidal) supramolecules. The formation of these discrete structures is characterized using NMR spectroscopy and electrospray ionization mass spectrometry (ESI‐MS). In all cases, the self‐organization process is directed by: 1) the geometric information encoded within the molecular subunits and 2) a thermodynamically driven dynamic self‐correction process. The result is the selective self‐assembly of multiple discrete products from a randomly formed complex. The influence of key experimental variables ‐ temperature and solvent ‐ on the self‐correction process and the fidelity of the resulting self‐organization systems is also described.     

Cisplatin‐Rich Polyoxazoline–Poly(aspartic acid) Supramolecular Nanoparticles

Cisplatin‐rich supramolecular nanoparticles are constructed through the supramolecular inclusion interaction between the admantyl (Ad)‐terminated poly(aspartic acid) (Ad‐P(Asp)) and the β‐cyclodextrin (β‐CD)‐terminated poly(2‐methyl‐2‐oxazoline). In the formation of the nanoparticles, the β‐CD/admantane inclusion complex integrates poly(2‐methyl‐2‐oxazoline) and poly(aspartic acid) chains to form pseudoblock copolymers, followed by the coordination between carboxyl groups in P(Asp) block and cisplatin. This coordination interaction drives the formation of nanoparticle and enables cisplatin incorporated into the nanoparticles. The spherical cisplatin‐rich supramolecular nanoparticles have 53% cisplatin‐loading content, good stability, and effective inhibition of the cell proliferation when it is tested in H22 cancer cells. Near‐infrared fluorescence imaging of tumor bearing mice reveals that the cisplatin‐rich nanoparticles can target the tumor in vivo effectively.     

pH‐Controllable Supramolecular Systems

Proton, all that matters! This Focus Review surveys representative examples of pH‐controllable supramolecular systems with interesting features and state‐of‐the‐art applications, which can lead to the construction of meaningful molecular machines for electronic and biological applications that can be controlled by simple perturbation with acid and base.

     

The Assembly of Supramolecular Boxes and Coordination Polymers Based on Bis‐Zinc‐Salphen Building Blocks

We report the assembly of supramolecular boxes and coordination polymers based on a rigid bis‐zinc(II)‐salphen complex and various ditopic nitrogen ligands. The use of the bis‐zinc(II)‐salphen building block in combination with small ditopic nitrogen ligands gave organic coordination polymers both in solution as well as in the solid state. Molecular modeling shows that supramolecular boxes with small internal cavities can be formed. However, the inability to accommodate solvent molecules (such as toluene) in these cavities explains why coordination polymers are prevailing over well‐defined boxes, as it would lead to an energetically unfavorable vacuum. In contrast, for relatively longer ditopic nitrogen ligands, we observed the selective formation of supramolecular box assemblies in all cases studied. The approach can be easily extended to chiral analogues by using chiral ditopic nitrogen ligands.     

Construction of Supramolecular Self‐Assembled Microfibers with Fluorescent Properties through a Modified Ionic Self‐Assembly (ISA) Strategy

Highly ordered supramolecular microfibers were constructed through a simple ionic self‐assembly strategy from complexes of the N‐tetradecyl‐N‐methylpyrrolidinium bromide (C₁₄MPB) surface‐active ionic liquid and the small methyl orange (MO) dye molecule, with the aid of patent blue VF sodium salt. By using scanning electron microscopy and polarized optical microscopy, the width of these self‐assembled microfibers is observed to be about 1 to 5 μm and their length is from tens of micrometers to almost a millimeter. The ¹H NMR spectra of the microfibers indicates that the supramolecular complexes are composed of C₁₄MPB and MO in equal molar ratio. The electrostatic, hydrophobic, and π–π stacking interactions are regarded as the main driving forces for the formation of microfibers. Furthermore, through characterization by using confocal fluorescence microscopy, the microfibers were observed to show strong fluorescent properties and may find potential applications in many fields.