Alcohol‐Mediated Resistance‐Switching Behavior in Metal–Organic Framework‐Based Electronic Devices

Metal‐organic frameworks (MOFs) have drawn increasing attentions as promising candidates for functional devices. Herein, we present MOF films in constructing memory devices with alcohol mediated resistance switching property, where the resistance state is controlled by applying alcohol vapors to achieve multilevel information storage. The ordered packing mode and the hydrogen bonding system of the guest molecules adsorbed in MOF crystals are shown to be the reason for the alcohol mediated electrical switching. This chemically mediated memory device can be a candidate in achieving environment‐responsive devices and exhibits potential applications in wearable information storage systems.     

Hollow Metal–Organic‐Framework‐Mediated In Situ Architecture of Copper Dendrites for Enhanced CO2 Electroreduction

Electrocatalytic reduction of CO₂ to a single product at high current densities and efficiencies remains a challenge. However, the conventional electrode preparation methods, such as drop‐casting, usually suffer from low intrinsic activity. Herein, we report a synthesis strategy for preparing heterogeneous electrocatalyst composed of 3D hierarchical Cu dendrites that derived from an in situ electrosynthesized hollow copper metal–organic framework (MOF), for which the preparation of the Cu‐MOF film took only 5 min. The synthesis strategy preferentially exposes active sites, which favor's the reduction of CO₂ to formate. The current density could be as high as 102.1 mA cm^?2 with a selectivity of 98.2 % in ionic‐liquid‐based electrolyte and a commonly used H‐type cell.     

Hydrolytic Transformation of Microporous Metal–Organic Frameworks to Hierarchical Micro‐ and Mesoporous MOFs

A new approach to the synthesis of hierarchical micro‐ and mesoporous MOFs from microporous MOFs involves a simple hydrolytic post‐synthetic procedure. As a proof of concept, a new microporous MOF, POST‐66(Y), was synthesized and its transformation into a hierarchical micro‐ and mesoporous MOF by water treatment was studied. This method produced mesopores in the range of 3 to 20 nm in the MOF while maintaining the original microporous structure, at least in part. The degree of micro‐ and mesoporosity can be controlled by adjusting the time and temperature of hydrolysis. The resulting hierarchical porous MOF, POST‐66(Y)‐wt, can be utilized to encapsulate nanometer‐sized guests such as proteins, and the enhanced stability and recyclability of an encapsulated enzyme is demonstrated.     

Assembly of Mesoporous Metal–Organic Framework Templated by an Ionic Liquid/Ethylene Glycol Interface

We propose a facile room‐temperature synthesis of a metal–organic framework (MOF) with a bimodal mesoporous structure (3.9 and 17‐28 nm) in an ionic liquid (IL)/ethylene glycol (EG) mixture. The X‐ray diffraction analysis reveals that MOF formation can be efficiently promoted by the presence of the EG/IL interface at room temperature. The MOFs with mesoporous networks are characterized by SEM and TEM. The formation mechanism of the mesoporous MOF in EG/IL mixture is investigated. It is proposed that the EG nanodroplets in the IL work as templates for the formation of the large mesopores. The as‐synthesized mesoporous metal–organic framework is an effective and reusable heterogeneous catalyst to catalyze the aerobic oxidation of benzylic alcohols.     

Aqueous Batteries Operated at −50 °C

Insufficient ionic conductivity and freezing of the electrolyte are considered the main problems for electrochemical energy storage at low temperatures (low T). Here, an electrolyte with a freezing point lower than ?130 °C is developed by using dimethyl sulfoxide (DMSO) as an additive with molar fraction of 0.3 to an aqueous solution of 2 m NaClO₄ (2M‐0.3 electrolyte). The 2M‐0.3 electrolyte exhibits sufficient ionic conductivity of 0.11 mS cm^?1 at ?50 °C. The combination of spectroscopic investigations and molecular dynamics (MD) simulations reveal that hydrogen bonds are stably formed between DMSO and water molecules, facilitating the operation of the electrolyte at ultra‐low T. Using DMSO as the electrolyte additive, the aqueous rechargeable alkali‐ion batteries (AABs) can work well even at ?50 °C. This work provides a simple and effective strategy to develop low T AABs.     

Microwave‐Assisted Modular Fabrication of Nanoscale Luminescent Metal‐Organic Framework for Molecular Sensing

Miniaturizing the size of metal‐organic framework (MOF) crystals to the nanometer scale is challenging, but it provides more advanced applications without changing the characteristic features itself. It is especially useful to investigate the correlation between the porous properties and the interfacial structures of nanocrystals. Using amino acids as capping agents, nanoscale Tb‐MOF‐76 is fabricated rapidly by means of microwave‐assisted methods. Both the modular effects of the amimo acids and the acid–base environment of the reaction medium have an important impact on the morphologies and dimensions of Tb‐MOF‐76. The structures of the samples are confirmed by powder X‐ray diffraction, and the morphologies are characterized by SEM. Photoluminescence studies reveal that these Tb‐MOF‐76 materials exhibit a green emission corresponding to the transition ⁵D₄→⁷F_J of Tb³⁺ ions under UV‐light excitation, which is sensitive to small organic molecules in solution.     

Hydrangea‐like NiCo‐based Bimetal‐organic Frameworks,and their Pros and Cons as Supercapacitor Electrode Materials in Aqueous Electrolytes

Hydrangea‐like NiCo‐based bimetal‐organic frameworks (NiCo‐MOF) are synthesized in DMF‐EtOH solution via a solvothermal method, using 4,4′‐biphenyldicarboxylic acid as a ligand. NiCo‐MOF having a highest capacity of 1056.6 F · g^–1 at 0.5 A · g^–1 and 457.7 F · g^–1 even at 10 A · g^–1 is achieved at a Ni/Co/BPDC molar ratio of 1:1:1, a temperature of 170 °C and a reaction time of 12 hours. It exhibits secondary 3D microsphere structures assembled by primary 2D nanosheet structures, good crystalline structure and good thermal stability below 350 °C in air. All the electrochemical data show that NiCo‐MOF has the pros and cons as supercapacitor electrode materials in aqueous electrolytes. On the one hand, NiCo‐MOF has a high capacity even at a high current density, low internal resistance, charge‐transfer resistance and ion diffusion impendence, owing to the ordered coordination structure, 2D nanosheet structure and 3D assembled microsphere structure of NiCo‐MOF. On the other hand, the cycling stability and rate capability are not ideal enough due to the hydrolysis of coordination bonds in aqueous electrolytes, especially, in alkaline solution. The good dispersion and high electrochemical activity of metal ions bring a high capacity for NiCo‐MOF, but they result in the poor stability of NiCo‐MOF. In the future work, finding a suitable organic electrolyte is an effective way to enhance the cycling stability of NiCo‐MOF as well as deriving more stable skeleton materials from NiCo‐MOF.     

A Novel Hybrid Metal–Organic Framework–Polymeric Monolith for Solid‐Phase Microextraction

This study describes the fabrication of a novel hybrid metal–organic framework– organic polymer (MOF–polymer) for use as a stationary phase in fritless solid‐phase microextraction (SPME) for validating analytical methods. The MOF–polymer was prepared by using ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and an imidazolium‐based ionic liquid as porogenic solvent followed by microwave‐assisted polymerization with the addition of 25 % MOF. This novel hybrid MOF–polymer was used to extract penicillin (penicillin G, penicillin V, oxacillin, cloxacillin, nafcillin, dicloxacillin) under different conditions. Quantitative analysis of the extracted penicillin samples using the MOF–organic polymer for SPME was conducted by using capillary electrochromatography (CEC) coupled with UV analysis. The penicillin recovery was 63–96.2 % with high reproducibility, sensitivity, and reusability. The extraction time with the proposed fabricated SPME was only 34 min.     

Crystal Dynamics in Multi‐stimuli‐Responsive Entangled Metal–Organic Frameworks

An understanding of solid‐state crystal dynamics or flexibility in metal–organic frameworks (MOFs) showing multiple structural changes is highly demanding for the design of materials with potential applications in sensing and recognition. However, entangled MOFs showing such flexible behavior pose a great challenge in terms of extracting information on their dynamics because of their poor single‐crystallinity. In this article, detailed experimental studies on a twofold entangled MOF ( f‐MOF‐1) are reported, which unveil its structural response toward external stimuli such as temperature, pressure, and guest molecules. The crystallographic study shows multiple structural changes in f‐MOF‐1 , by which the 3 D net deforms and slides upon guest removal. Two distinct desolvated phases, that is, f‐MOF‐1 a and f‐MOF‐1 b , could be isolated; the former is a metastable one and transformable to the latter phase upon heating. The two phases show different gated CO₂ adsorption profiles. DFT‐based calculations provide an insight into the selective and gated adsorption behavior with CO₂ of f‐MOF‐1 b . The gate‐opening threshold pressure of CO₂ adsorption can be tuned strategically by changing the chemical functionality of the linker from ethanylene (?CH₂?CH₂?) in f‐MOF‐1 to an azo (?N=N?) functionality in an analogous MOF, f‐MOF‐2 . The modulation of functionality has an indirect influence on the gate‐opening pressure owing to the difference in inter‐net interaction. The framework of f‐MOF‐1 is highly responsive toward CO₂ gas molecules, and these results are supported by DFT calculations.     

Amphiphilic Carbazole‐Containing Compounds with Lower Critical Solution Temperature Behavior for Supramolecular Self‐Assembly and Solution‐Processable Resistive Memories

The self‐organization and resistive memory performances of a series of newly synthesized water‐soluble amphiphilic carbazole derivatives have been explored. Temperature‐dependent UV/Vis absorption spectroscopy has been conducted to study the isodesmic self‐assembly mechanism of the carbazole‐containing compounds. This class of compounds also exhibits interesting lower critical solution temperature properties, which are sensitive to concentration and ionic additives. One of the compounds has been solution‐processed and utilized as an active material in the engineering of resistive memory devices, exhibiting a switching voltage of about 3.9 V, a constant ON/OFF current ratio of 10⁶, and a long retention time of 10⁴ s. The present work demonstrates the versatile potential applications of water‐soluble amphiphilic carbazole‐containing compounds in supramolecular chemistry and resistive memory devices.     

An Intrinsically Self‐Healing NiCo||Zn Rechargeable Battery with a Self‐Healable Ferric‐Ion‐Crosslinking Sodium Polyacrylate Hydrogel Electrolyte

Self‐healing solid‐state aqueous rechargeable NiCo||Zn batteries are inherently safe and have a high energy density and mechanical robustness. However, the self‐healability of solid‐state batteries has only been realized by a few studies in which electron/ion‐inactive self‐healable substrates are utilized. This arises from the lack of self‐healable electrolytes. Now an intrinsically self‐healing battery has been designed that utilizes a new electrolyte that is intrinsically self‐healable. Sodium polyacrylate hydrogel chains are crosslinked by ferric ions to promote dynamic reconstruction of an integral network. These non‐covalent crosslinkers can form ionic bonds to reconnect damaged surfaces when the hydrogel is cut off, providing an ultimate solution to the intrinsic self‐healability problem of batteries. As a result, this NiCo||Zn battery with this hydrogel electrolyte can be autonomically self‐healed with over 87 % of capacity retained after 4 cycles of breaking/healing.     

Evaporation‐Directed Crack‐Patterning of Metal–Organic Framework Colloidal Films and Their Application as Photonic Sensors

A straightforward crack‐patterning method is reported allowing the direct formation of periodic cracks in metal–organic framework (MOF) nanoparticle films during dip‐coating deposition. The crack propagation and periodicity can be easily tailored by controlling the evaporation front and the withdrawal speed. Several MOF‐patterned films can be fabricated on large surfaces and on several substrates (flat, curved or flexible) including the inner surface of a tube, not achievable by other lithographic techniques. We demonstrate that the periodic cracked arrays diffract light and, due to the MOF sorption properties, photonic vapor sensors are fabricated. A new concept of “in‐tube”, MOF‐based diffraction grating sensors is proposed with outstanding sensitivity that can be easily tuned “on‐demand” as function of the desired detection range.     

Observation of Ion Electrosorption in Metal–Organic Framework Micropores with In Operando Small‐Angle Neutron Scattering

A molecular‐level understanding of transport and adsorption mechanisms of electrolyte ions in nanoporous electrodes under applied potentials is essential to control the performance of double‐layer capacitors. Here, in operando small‐angle neutron scattering (SANS) is used to directly detect ion movements into the nanopores of a conductive metal–organic framework (MOF) electrode under operating conditions. Neutron‐scattering data reveals that most of the void space within the MOF is accessible to the solvent. Upon the addition of the electrolyte sodium triflate (NaOTf), the ions are adsorbed on the outer surface of the protrusions to form a 30 Å layer instead of entering the ionophobic pores in the absence of an applied charging potential. The changes in scattering intensity when potentials are applied suggests the ion rearrangement in the micropores following different mechanisms depending on the electrode polarization. These observations shed insights on ion electrosorption in electrode materials.     

Introduction of an Ionic Liquid into the Micropores of a Metal–Organic Framework and Its Anomalous Phase Behavior

Controlling the dynamics of ionic liquids (ILs) is a significant issue for widespread use. Metal–organic frameworks (MOFs) are ideal host materials for ILs because of their small micropores and tunable host–guest interactions. Herein, we demonstrate the first example of an IL incorporated within the micropores of a MOF. The system studied consisted of EMI‐TFSA (1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)amide) and ZIF‐8 (composed of Zn(MeIM)₂; H(MeIM)=2‐methylimidazole) as the IL and MOF, respectively. Construction of the EMI‐TFSA in ZIF‐8 was confirmed by X‐ray powder diffraction, nitrogen gas adsorption, and infrared absorption spectroscopy. Differential scanning calorimetry and solid‐state NMR measurements showed that the EMI‐TFSA inside the micropores demonstrated no freezing transition down to 123 K, whereas bulk EMI‐TFSA froze at 231 K. Such anomalous phase behavior originates from the nanosize effect of the MOF on the IL. This result provides a novel strategy for stabilizing the liquid phase of the ILs down to a lower temperature region.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Template‐Directed Synthesis of Porous and Protective Core–Shell Bionanoparticles

Metal–organic frameworks (MOFs) are promising high surface area coordination polymers with tunable pore structures and functionality; however, a lack of good size and morphological control over the as‐prepared MOFs has persisted as an issue in their application. Herein, we show how a robust protein template, tobacco mosaic virus (TMV), can be used to regulate the size and shape of as‐fabricated MOF materials. We were able to obtain discrete rod‐shaped TMV@MOF core–shell hybrids with good uniformity, and their diameters could be tuned by adjusting the synthetic conditions, which can also significantly impact the stability of the core–shell composite. More interestingly, the virus particle underneath the MOF shell can be chemically modified using a standard bioconjugation reaction, showing mass transportation within the MOF shell.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Application of Weakly Oriented Non‐ionic Liquid Crystal Solvents to NMR Studies of Poly‐ethylene Oxide (PEO)

We report in this article the application of a series of weakly ordered liquid crystal solvents for liquid state nuclear magnetic resonance (NMR) spectroscopy. The solvents are a n‐alkyl‐poly(ethylene glycol)/n‐alkyl alcohol non‐ionic liquid crystal system, first proposed by Ruckert and Otting (J. Am. Chem. Soc. 2000 , 122, 7793). The merits of these solvents are further demonstrated by using them with a homogeneous polymer PEO which is one of the most studied polymer electrolyte materials, thus offering an answer to the question of whether the weak anisotropy introduced by liquid crystal solvents has any connection with the large‐scale (≥ one nanometer) heterogeneity (tertiary or higher orders of structure) of the system under study.     

Modulating the Biofunctionality of Metal–Organic‐Framework‐Encapsulated Enzymes through Controllable Embedding Patterns

Embedding an enzyme within a MOF as exoskeleton (enzyme@MOF) offers new opportunities to improve the inherent fragile nature of the enzyme, but also to impart novel biofunctionality to the MOF. Despite the remarkable stability achieved for MOF‐embedded enzymes, embedding patterns and conversion of the enzymatic biofunctionality after entrapment by a MOF have only received limited attention. Herein, we reveal how embedding patterns affect the bioactivity of an enzyme encapsulated in ZIF‐8. The enzyme@MOF can maintain high activity when the encapsulation process is driven by rapid enzyme‐triggered nucleation of ZIF‐8. When the encapsulation is driven by slow coprecipitation and the enzymes are not involved in the nucleation of ZIF‐8, enzyme@MOF tends to be inactive owing to unfolding and competing coordination caused by the ligand, 2‐methyl imidazole. These two embedding patterns can easily be controlled by chemical modification of the amino acids of the enzymes, modulating their biofunctionality.     

A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction

Metal–organic framework (MOFs) two‐dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top‐down or bottom‐up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF‐74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top‐down) or the conventional solvothermal method (bottom‐up). The ultrathin iron–cobalt MOF‐74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF‐74 particles and the state‐of‐the‐art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.