Asymmetric Total Synthesis of (+)‐Bermudenynol,a C15 Laurencia Metabolite with a Vinyl Chloride Containing Oxocene Skeleton,through Intramolecular Amide Enolate Alkylation

A substrate‐controlled asymmetric total synthesis of (+)‐bermudenynol, a compact and synthetically challenging C₁₅ Laurencia metabolite that contains several halogen atoms, is reported. The oxocene core, which contains a vinyl chloride, was constructed by an efficient and highly stereoselective intramolecular amide enolate alkylation (IAEA). This result showcases the broad utility of the IAEA methodology as a useful alternative for cases in which the ring‐closing metathesis is inefficient.     

Measurement of sulfur isotope composition (δ34S) by multiple‐collector thermal ionization mass spectrometry using a 33S‐36S double spike

A new analytical technique is described for the determination of δ³⁴S that is comparable to or better than modern gas source mass spectrometry in precision and accuracy, but requires about a factor of 10 less sample. The technique is based on the production of singularly charged arsenic sulfide molecular ions (AsS⁺) by thermal ionization using silica gel as an emitter and combines multiple‐collector thermal ionization mass spectrometry (MC‐TIMS) with a ³³S‐³⁶S double spike to correct instrumental fractionation. Three international sulfur standards (IAEA‐S‐1, IAEA‐S‐2, and IAEA‐S‐3) were measured to evaluate the precision and accuracy of the new technique and to evaluate the consensus values for these standards. Two different double spike preparations were used. The δ³⁴S values (reported relative to Vienna Canyon Diablo Troilite (VCDT), (δ³⁴S (‰) = ([((³⁴S/³²S)_sample/(³⁴S/³²S)_VCDT ? 1) × 1000]), ³⁴S/³²S_VCDT = 0.0441626) determined were ?0.32 ± 0.04‰ (1σ, n = 4) and ?0.31 ± 0.13‰ (1σ, n = 8) for IAEA‐S‐1, 22.65 ± 0.04‰ (1σ, n = 7) and 22.60 ± 0.06‰ (1σ, n = 5) for IAEA‐S‐2, and ?32.47 ± 0.07‰ (1σ, n = 8) for IAEA‐S‐3. The amount of natural sample used for these analyses ranged from 0.40 to 2.35 µmol. Replicate determinations of each standard showed less than 0.5‰ variability (IAEA‐S‐1 <0.4‰, IAEA‐S‐2 <0.2‰, and IAEA‐S‐3 <0.2‰). Because the technique is based on thermal ionization of AsS⁺, and As is mononuclidic, corrections for interferences or for scale contraction/expansion are not required. The availability of MC‐TIMS instruments in laboratories around the world makes this technique immediately available to a much larger scientific community who require highly accurate and precise measurements of sulfur. Published in 2005 by John Wiley & Sons, Ltd.     

Offline oxygen isotope analysis of organic compounds with high N:O

Although the advantages of online δ¹⁸O analysis of organic compounds make its broad application desirable, researchers have encountered NO⁺ isobaric interference with CO⁺ at m/z 30 (e.g. ¹⁴N¹⁶O⁺, ¹²C¹⁸O⁺) when analyzing nitrogenous substrates. If the δ¹⁸O value of inter‐laboratory standards for substrates with high N:O value could be confirmed offline, these materials could be analyzed periodically and used to evaluate δ¹⁸O data produced online for nitrogenous unknowns. To this end, we present an offline method based on modifications of the methods of Schimmelmann and Deniro (Anal. Chem. 1985; 57: 2644) and Sauer and Sternberg (Anal. Chem. 1994; 66: 2409), whereby all the N₂ from the gas products of a chlorinated pyrolysis was eliminated, resulting in purified CO₂ for analysis via a dual‐inlet isotope ratio mass spectrometry system. We evaluated our method by comparing observed δ¹⁸O values with previously published or inter‐laboratory calibrated δ¹⁸O values for five nitrogen‐free working reference materials; finding isotopic agreement to within ±0.2‰ for SIGMA® cellulose, IAEA‐CH3 cellulose (C₆H₁₀O₅) and IAEA‐CH6 sucrose (C₁₂H₂₂O₁₁), and within ±1.8‰ for IAEA‐601 and IAEA‐602 benzoic acids (C₇H₆O₂). We also compared the δ¹⁸O values of IAEA‐CH3 cellulose and IAEA‐CH6 sucrose that was nitrogen‐'doped' with adenine (C₅H₅N₅), imidazole (C₃H₄N₂) and 2‐aminopyrimidine (C₄H₅N₃) with the undoped δ¹⁸O values for the same substrates; yielding isotopic agreement to within ±0.7‰. Finally, we provide an independent analysis of the δ¹⁸O value of IAEA‐600 caffeine (C₈H₁₀N₄O₂), previously characterized using online systems exclusively, and discuss the reasons for an average 1.4‰ enrichment in δ¹⁸O observed offline relative to the consensus online δ¹⁸O value. Copyright © 2010 John Wiley & Sons, Ltd.     

Form I of desloratadine,a tricyclic anti­histamine

The title compound [systematic name: 8‐chloro‐11‐(piperidin‐4‐yl­idene)‐6,11‐dihydro‐5H‐benzo[4,5]cyclo­hepta­[2,1‐b]pyridine], C₁₉H₁₉ClN₂, was crystallized from ethyl acetate. The inter­esting feature of the reported structure is that it does not contain any strong hydrogen bonds, although the mol­ecule contains a secondary NH group, which is a good hydrogen‐bond donor.     

N2: a potential pitfall for bulk 2H isotope analysis of explosives and other nitrogen‐rich compounds by continuous‐flow isotope‐ratio mass spectrometry

Observations made during the ¹³C isotope analysis of gaseous CO₂ in the simultaneous presence of argon in the ion source of the isotope ratio mass spectrometer prompted us to investigate what influence the simultaneous presence of nitrogen would have on both accuracy and precision of bulk ²H isotope analysis of nitrogen‐rich organic compounds. Initially an international reference material, IAEA‐CH7, was mixed with silver nitrate in various ratios to assess the impact that N₂ evolved from the pyrolysis of nitrogen‐rich organic compounds would have on measured δ²H‐values of IAEA‐CH7. In a subsequent experiment, benzoic acid was mixed with silver nitrate to mimic the N:H ratio of organic‐rich nitrogen compounds such as cellulose nitrate and RDX. The results of both experiments showed a significant deterioration of both accuracy and precision for the expected δ²H values for IAEA‐CH7 and benzoic acid when model mixtures were converted into hydrogen and nitrogen, and subsequently separated by gas chromatography using standard experimental conditions, namely a 60 cm packed column with molecular sieve 5 Å as stationary phase held at a temperature of 85°C. It was found that bulk ²H stable isotope analysis of nitrogen‐rich organic compounds employing published standard conditions can result in a loss of accuracy and precision yielding δ²H values that are 5 to 25‰ too negative, thus suggesting, for example, that tree‐ring ²H isotope data based on cellulose nitrate may have to be revised. Copyright © 2009 John Wiley & Sons, Ltd.     

Azadirachtol,a tetranortriterpenoid from neem kernels

The title compound, di­methyl (?)‐(2aR,3R,4R,4aS,5R,7aS,8R,10S,10aR)‐3,8,10‐tri­hydroxy‐4‐[(2R,6R)‐2‐hydroxy‐11‐methyl‐5,7,10‐trioxatetra­cyclo­[6.3.1.0^2,60^9,11]­dodec‐3‐en‐9‐yl]‐4‐methyl­per­hydro­isobenzo­furano­[5,4,3a‐cd]­isobenzofuran‐5,10a‐di­acetate, C₂₈H₃₆O₁₃, which exhibits higher antifeedant activity than azadirachtin‐A, a known potent antifeedant, was isolated from neem kernels. The asymmetric unit of the structure contains two independent mol­ecules, which differ in the conformations of their functional groups and also in the conformations of some of the rings. The relative orientation between the decalin and furan­yl moieties is similar to that observed in the majority of azadirachtin structures, but is different from that in azadirachtin‐A. The two symmetry‐independent mol­ecules are linked into dimeric units by intermolecular O—H?O hydrogen bonds.     

Na6(H2O)20(V10O28)·4H2O,a novel polyvanadate(V) with a three‐dimensional framework

The novel title polyvanadate(V), poly[[octa‐μ‐aqua‐dodecaaqua‐μ₄‐octacosaoxidodecavanadato‐hexasodium] tetrahydrate], [Na₆(H₂O)₂₀(V₁₀O₂₈)·4H₂O]_n, contains [V₁₀O₂₈]⁶⁻ anions which lie about inversion centres and have approximate 2/m symmetry and which are linked to [Na₃(H₂O)₁₀]³⁺ cations through two terminal and two μ₂‐bridging O atoms. The structure contains three inequivalent Na⁺ cations, two of which form [Na₂(H₂O)₈]_n chains, which are linked via NaO₆ octahedra involving the third Na⁺ ion, thus forming a three‐dimensional framework.     

(4aR,8aS,9aR,10aS)‐8a,9a‐Difluoro‐1,4,4a,5,8,8a,9,9a,10,10a‐decahydroanthracene‐4a,10a‐diol hemihydrate

The title compound, C₁₄H₁₈F₂O₂·0.5H₂O, a hemihydrate of a C_s‐symmetric unsaturated difluorodiol, crystallizes in the centrosymmetric space group P2/m (Z = 4). The asymmetric unit contains two crystallographically independent difluorodiol half‐molecules, occupying the mirror planes at (x, 0, z) and (x, , z), and half a molecule of water, lying on the twofold axis at (0, y, 0). Four difluorodiol molecules self‐assemble around each solvent water molecule via O—H...O hydrogen bonds in a near tetrahedral symmetry to generate a cylindrical column‐like architecture.     

A Novel Ruthenium(III) and Lithium Complex: Synthesis,Crystal Structure,and Magnetic Properties

A novel complex [Li₃{μ‐(H₂O)₆}(H₂O)₆]·[RuCl₆] has been synthesized and was characterized by single‐crystal X‐ray diffraction. The compound crystallizes in rhombohedral space group R3¯c, with the unit cell parameters a = b = 9.948(2)Å, c = 33.376(14)Å, γ = 120°, V = 2860.5(15)ų, Z = 6, D_c = 1.918 Mg m^—3, μ = 1.703 mm^—1, R = 0.0244, wR = 0.0478. The compound consists of a cation, which contains three lithium ions linked by six bridged water molecules, and an anion, which contains a ruthenium(III) ion. The whole complex can be described as a three‐dimensional structure linked by hydrogen bonds between cation and anion. The magnetic properties of the complex have been investigated. The IR, UV‐vis and EPR spectra are studied.     

(1SR,2SR,3SR,4RS,5RS,6RS,7SR,8RS)‐7,8‐Dichloro­bicyclo­[4.2.0]octa‐2,3,4,5‐tetrayl tetra­acetate

In the title compound, C₁₆H₂₀Cl₂O₈, the bicyclic system contains a central non‐planar cyclo­hexane ring which is fused to a cyclo­butane moiety. The cyclo­hexane ring has a chair conformation and the whole system adopts a syn conformation. The structure provides information on the stereochemical course of the chlorination, photo‐oxidation and hydrox­ylation steps of the reaction.     

Nicotine,acetanilide and urea multi‐level 2H‐, 13C‐ and 15N‐abundance reference materials for continuous‐flow isotope ratio mass spectrometry

Accurate determinations of stable isotope ratios require a calibration using at least two reference materials with different isotopic compositions to anchor the isotopic scale and compensate for differences in machine slope. Ideally, the δ values of these reference materials should bracket the isotopic range of samples with unknown δ values. While the practice of analyzing two isotopically distinct reference materials is common for water (VSMOW‐SLAP) and carbonates (NBS 19 and L‐SVEC), the lack of widely available organic reference materials with distinct isotopic composition has hindered the practice when analyzing organic materials by elemental analysis/isotope ratio mass spectrometry (EA‐IRMS). At present only L‐glutamic acids USGS40 and USGS41 satisfy these requirements for δ¹³C and δ¹⁵N, with the limitation that L‐glutamic acid is not suitable for analysis by gas chromatography (GC). We describe the development and quality testing of (i) four nicotine laboratory reference materials for on‐line (i.e. continuous flow) hydrogen reductive gas chromatography‐isotope ratio mass‐spectrometry (GC‐IRMS), (ii) five nicotines for oxidative C, N gas chromatography‐combustion‐isotope ratio mass‐spectrometry (GC‐C‐IRMS, or GC‐IRMS), and (iii) also three acetanilide and three urea reference materials for on‐line oxidative EA‐IRMS for C and N. Isotopic off‐line calibration against international stable isotope measurement standards at Indiana University adhered to the ‘principle of identical treatment’. The new reference materials cover the following isotopic ranges: δ²H_nicotine ?162 to ?45‰, δ¹³C_nicotine ?30.05 to +7.72‰, δ¹⁵N_nicotine ?6.03 to +33.62‰; δ¹⁵N_acetanilide +1.18 to +40.57‰; δ¹³C_urea ?34.13 to +11.71‰, δ¹⁵N_urea +0.26 to +40.61‰ (recommended δ values refer to calibration with NBS 19, L‐SVEC, IAEA‐N‐1, and IAEA‐N‐2). Nicotines fill a gap as the first organic nitrogen stable isotope reference materials for GC‐IRMS that are available with different δ¹⁵N values. Comparative δ¹³C and δ¹⁵N on‐line EA‐IRMS data from 14 volunteering laboratories document the usefulness and reliability of acetanilides and ureas as EA‐IRMS reference materials. Published in 2009 by John Wiley & Sons, Ltd.     

Synthesis,Structure, and Properties of a New Calcium(II) Complex of 1,10‐Phenanthroline, 1,2,4,5‐Benzenetetracarboxylic Acid,and a New Precursor to Produce Pure Phase Micro‐crystalline Calcite Particles

The self‐assembly of 1, 0‐phenanthroline (phen) and 1,2,4,5‐benzenetetracarboxylic acid(H₄btc) with Ca(NO₃)₂ gives rise to a two‐dimensional network structure coordination polymer, [Ca(phen)(btc)_0.5(H₂O)] ( 1 ), which was characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction. This compound is monoclinic, space group C2/c, with Z = 8 in a unit cell with dimensions a = 21.744(3) Å, b = 10.0151(12) Å, c = 14.7122(17) Å, β = 110.2850(10)°. The structure contains one crystallographic unique Ca^II atom, one phen coordinated molecule and a half of btc^4– anion. The phen molecule acts as a didentate ligand chelating with a Ca^II atom, whereas the btc^4– anion acts as a μ₆‐bridge linking six different Ca^II atoms to form a two‐dimensional network with (4, 4) topological structure. The three dimensional stacking structures are formed by C–H ··· O hydrogen bonding and π–π interaction. The thermal stability and fluorescent properties of 1 were investigated. Calcite particles are produced by calcination of compound 1 at 580 °C. The obtained calcite was characterized by XRD and SEM analyses.     

Comprehensive inter‐laboratory calibration of reference materials for δ18O versus VSMOW using various on‐line high‐temperature conversion techniques

Internationally distributed organic and inorganic oxygen isotopic reference materials have been calibrated by six laboratories carrying out more than 5300 measurements using a variety of high‐temperature conversion techniques (HTC) a in an evaluation sponsored by the International Union of Pure and Applied Chemistry (IUPAC). To aid in the calibration of these reference materials, which span more than 125‰, an artificially enriched reference water (δ¹⁸O of +78.91‰) and two barium sulfates (one depleted and one enriched in ¹⁸O) were prepared and calibrated relative to VSMOW2 b and SLAP reference waters. These materials were used to calibrate the other isotopic reference materials in this study, which yielded:

Calcite‐CO2 mixed into CO2‐free air: a new CO2‐in‐air stable isotope reference material for the VPDB scale

In order to generate a reliable and long‐lasting stable isotope ratio standard for CO₂ in samples of clean air, CO₂ is liberated from well‐characterized carbonate material and mixed with CO₂‐free air. For this purpose a dedicated acid reaction and air mixing system (ARAMIS) was designed. In the system, CO₂ is generated by a conventional acid digestion of powdered carbonate. Evolved CO₂ gas is mixed and equilibrated with a prefabricated gas comprised of N₂, O₂, Ar, and N₂O at close to ambient air concentrations. Distribution into glass flasks is made stepwise in a highly controlled fashion. The isotopic composition, established on automated extraction/measurement systems, varied within very small margins of error appropriate for high‐precision air‐CO₂ work (about ±0.015‰ for δ¹³C and ±0.025‰ for δ¹⁸O). To establish a valid δ¹⁸O relation to the VPDB scale, the temperature dependence of the reaction between 25 and 47°C has been determined with a high level of precision. Using identical procedures, CO₂‐in‐air mixtures were generated from a selection of reference materials; (1) the material defining the VPDB isotope scale (NBS 19, δ¹³C = +1.95‰ and δ¹⁸O = ?2.2‰ exactly); (2) a local calcite similar in isotopic composition to NBS 19 (‘MAR‐J1’, δ¹³C = +1.97‰ and δ¹⁸O = ?2.02‰), and (3) a natural calcite with isotopic compositions closer to atmospheric values (‘OMC‐J1’, δ¹³C = ?4.24‰ and δ¹⁸O = ?8.71‰). To quantitatively control the extent of isotope‐scale contraction in the system during mass spectrometric measurement other available international and local carbonate reference materials (L‐SVEC, IAEA‐CO‐1, IAEA‐CO‐8, CAL‐1 and CAL‐2) were also processed. As a further control pure CO₂ reference gases (Narcis I and II, NIST‐RM 8563, GS19 and GS20) were mixed with CO₂‐free synthetic air. Independently, the pure CO₂ gases were measured on the dual inlet systems of the same mass spectrometers. The isotopic record of a large number of independent batches prepared over the course of several months is presented. In addition, the relationship with other implementations of the VPDB‐scale for CO₂‐in‐air (e.g. CG‐99, based on calibration of pure CO₂ gas) has been carefully established. The systematic high‐precision comparison of secondary carbonate and CO₂ reference materials covering a wide range in isotopic composition revealed that assigned δ‐values may be (slightly) in error. Measurements in this work deviate systematically from assigned values, roughly scaling with isotopic distance from NBS 19. This finding indicates that a scale contraction effect could have biased the consensus results. The observation also underlines the importance of cross‐contamination errors for high‐precision isotope ratio measurements. As a result of the experiments, a new standard reference material (SRM), which consists of two 5‐L glass flasks containing air at 1.6 bar and the CO₂ evolved from two different carbonate materials, is available for distribution. These ‘J‐RAS’ SRM flasks (‘Jena‐Reference Air Set’) are designed to serve as a high‐precision link to VPDB for improving inter‐laboratory comparability. a Copyright © 2005 John Wiley & Sons, Ltd.     

(2S,3S)‐2,6‐Dimethylheptane‐1,3‐diol,the oxygenated side chain of 22(S)‐hydroxycholestrol,and its synthetic precursor (R)‐4‐benzyl‐3‐[(2R,3S)‐3‐hydroxy‐2,6‐dimethylheptanoyl]‐1,3‐oxazolidin‐2‐one

(2S,3S)‐2,6‐Dimethylheptane‐1,3‐diol, C₉H₂₀O₂, (I), was synthesized from the ketone (R)‐4‐benzyl‐3‐[(2R,3S)‐3‐hydroxy‐2,6‐dimethylheptanoyl]‐1,3‐oxazolidin‐2‐one, C₁₉H₂₇NO₄, (II), containing C atoms of known chirality. In both structures, strong hydrogen bonds between the hydroxy groups form tape motifs. The contribution from weaker C—H...O hydrogen bonds is much more evident in the structure of (II), which furthermore contains an example of a direct short Osp³...Csp² contact that represents a usually unrecognized type of intermolecular interaction.     

A chalcone showing positional disorder,two related diarylcyclohexenones showing enantiomeric disorder and a related hydroxyterphenyl,all derived from simple carbonyl precursors

Four compounds are reported, all of which lie along a versatile reaction pathway which leads from simple carbonyl compounds to terphenyls. (2E)‐1‐(2,4‐Dichlorophenyl)‐3‐ [4‐(prop‐1‐en‐2‐yl)phenyl]prop‐2‐en‐1‐one, C₁₈H₁₄Cl₂O, (I), prepared from 4‐(prop‐1‐en‐2‐yl)benzaldehyde and 2,4‐dichloroacetophenone, exhibits disorder over two sets of atomic sites having occupancies of 0.664 (6) and 0.336 (6). The related chalcone (2E)‐3‐(4‐chlorophenyl)‐1‐(4‐fluorophenyl)prop‐2‐en‐1‐one reacts with acetone to produce (5RS)‐3‐(4‐chlorophenyl)‐5‐[4‐(propan‐2‐yl)phenyl]cyclohex‐2‐en‐1‐one, C₂₁H₂₁ClO, (II), which exhibits enantiomeric disorder with occupancies at the reference site of 0.662 (4) and 0.338 (4) for the (5R) and (5S) forms; the same chalcone reacts with methyl 3‐oxobutanoate to give methyl (1RS,6SR)‐4‐(4‐chlorophenyl)‐6‐[4‐(propan‐2‐yl)phenyl]‐2‐oxocyclohex‐3‐ene‐1‐carboxylate, C₂₃H₂₃ClO₃, (III), where the reference site contains both (1R,6S) and (1S,6R) forms with occupancies of 0.923 (3) and 0.077 (3), respectively. Oxidation, using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone, of ethyl (1RS,6SR)‐6‐(4‐bromophenyl)‐4‐(4‐fluorophenyl)‐2‐oxocyclohex‐3‐ene‐1‐carboxylate, prepared in a similar manner to (II) and (III), produces ethyl 4′′‐bromo‐4‐fluoro‐5′‐hydroxy‐1,1′:3′,1′′‐terphenyl‐4′‐carboxylate, C₂₁H₁₆BrFO₃, (IV), which crystallizes with Z′ = 2 in the space group P. There are no significant intermolecular interactions in the structures of compounds (I) and (II), but for the major disorder component of compound (III), the molecules are linked into sheets by a combination of C—H...O and C—H...π(arene) hydrogen bonds. The two independent molecules of compound (IV) form two different centrosymmetric dimers, one built from inversion‐related pairs of C—H...O hydrogen bonds and the other from inversion‐related pairs of C—H...π(arene) hydrogen bonds. Comparisons are made with related compounds.     

An oxonium hydrogen sulfate of 3a,6a‐diphenyl­glycoluril

In the title compound, (5‐oxo‐3a,6a‐diphenyl­perhydro­imidazo[4,5‐d]imidazol‐2‐ylidene)oxonium hydrogen sulfate, C₁₆H₁₅N₄O₂⁺·HSO₄⁻, the asymmetric unit contains a hydrogen sulfate anion and a 3a,6a‐diphenyl­glycoluril oxonium cation. The hydrogen sulfate anion is joined to the oxonium cation via a strong O—H⋯O hydrogen bond (H⋯O = 1.69 Å). The crystal packing is mainly dominated by inter­actions involving the hydrogen sulfate anion. The diphenyl­glycoluril oxonium cations also self‐assemble through N—H⋯O hydrogen bonds, forming mol­ecular chains along the [001] vector. Four intra­molecular C—H⋯N hydrogen bonds are observed, having an S(5) motif.     

9,9′‐Biacridine N,N′‐dioxide: a novel potential bridging ligand bearing the bulky acridine N‐oxide skeleton

The title compound, C₂₆H₁₆N₂O₂, is a potential linear bridging O‐donor ligand comprising bulky acridine N‐oxide ring systems. Weak intermolecular C—H...O hydrogen‐bonding interactions link adjacent molecules to form extended chains. The structure also contains intermolecular C—H...π interactions.     

The chiral helical structure of a copper(II) complex with a tridentate Schiff base ligand

In the title salt, catena‐poly[[[aquacopper(II)]‐μ‐3‐(2‐pyridylmethyleneamino)propanoato‐κ⁴N,N′,O:O′] perchlorate], {[Cu(C₉H₉N₂O₂)(H₂O)]ClO₄}_n, the monomeric unit contains a square‐based pyramidal Cu^II centre. The four basal positions are occupied by a tridentate anionic Schiff base ligand which furnishes an NNO‐donor set, with the fourth basal position being occupied by an O‐donor atom from the carboxylate group of an adjacent Schiff base ligand. The coordination sphere is completed by a water molecule at the apical position. Interestingly, each carboxylate group in the ligand forms a syn–anti‐configured bridge between two Cu^II centres, leading to left‐handed chiral helicity. The framework also exhibits O—H...O hydrogen bonds involving the water molecules and an O atom of the perchlorate anion.     

Synthesis,crystal structure and cytotoxic activity of tricyclohexyltin complexes of benzenedioxyacetic acids

Two new bis(tricyclohexyltin)benzenedioxyacetates, 1,x‐C₆H₄[OCH₂CO₂Sn(c‐C₆H₁₁)₃]₂ ( 1 : x = 3; 2 : x = 4), have been synthesized and characterized by means of elemental analysis, infrared and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra and single‐crystal X‐ray diffraction. Compound 1 ?H₂O?CH₃OH is a binuclear tin complex containing a four‐coordinated tin and a five‐coordinated tin and linked by an R₃³(16) hydrogen bond into a one‐dimensional supramolecular chain. Compound 2 is a two‐dimensional coordination polymer which is formed as a result of anisobidentate bridging coordination action of the two carboxylate units of the ligand. Interestingly the two‐dimensional coordination polymer contains 34‐membered macrocycles each of which is comprised of four tricyclohexyltin units. Both compounds have potent in vitro cytotoxic activity against three human tumor cell lines: HeLa, MCF‐7 and CoLo 205. Copyright © 2015 John Wiley & Sons, Ltd.