A mixed‐valence diacetate‐bridged MnII–MnIII complex incorporating a bridging phenolate ligand

The synthesis and characterization of a new unsymmetrical dinucleating N,O‐donor ligand, 2‐[N,N‐bis­(2‐pyridyl­methyl)­amino­methyl]‐6‐[N‐(3,5‐di‐tert‐butyl‐2‐oxidobenzyl)‐N‐(2‐pyridyl­amino)­aminomethyl]‐4‐methyl­phenol (H₂Ldtb), as well as the X‐ray crystal structure of its corresponding mixed‐valence diacetate‐bridged manganese complex, di‐μ‐acetato‐μ‐{2‐[N,N‐bis­(2‐pyridylmethyl)amino­methyl]‐6‐[N‐(3,5‐di‐tert‐butyl‐2‐oxidobenzyl)‐N‐(2‐pyridyl­amino)­aminomethyl]‐4‐methylphenolato}dimanganese(II,III) tetra­phenyl­borate, [Mn^IIMn^III(C₄₂H₄₉N₅O₂)(C₂H₃O₂)₂](C₂₄H₂₀B), are reported. The complex may be regarded as an inter­esting structural model for the mixed‐valence Mn^II–Mn^III state of manganese catalase.     

NHC‐Containing Manganese(I) Electrocatalysts for the Two‐Electron Reduction of CO2

The synthesis and characterization of the first catalytic manganese N‐heterocyclic carbene complexes are reported: MnBr(N‐methyl‐N′‐2‐pyridylbenzimidazol‐2‐ylidine)(CO)₃ and MnBr(N‐methyl‐N′‐2‐pyridylimidazol‐2‐ylidine)(CO)₃. Both new species mediate the reduction of CO₂ to CO following two‐electron reduction of the Mn^I center, as observed with preparative scale electrolysis and verified with ¹³CO₂. The two‐electron reduction of these species occurs at a single potential, rather than in two sequential steps separated by hundreds of millivolts, as is the case for previously reported MnBr(2,2′‐bipyridine)(CO)₃. Catalytic current enhancement is observed at voltages similar to MnBr(2,2′‐bipyridine)(CO)₃.     

NH‐Heterocyclic Aryliodonium Salts and their Selective Conversion into N1‐Aryl‐5‐iodoimidazoles

The synthesis of N‐arylimidazoles substituted at the sterically encumbered 5‐position is a challenge for modern synthetic approaches. A new family of imidazolyl aryliodonium salts is reported, which serve as a stepping stone on the way to selective formation of N1‐aryl‐5‐iodoimidazoles. Iodine acts as a “universal” placeholder poised for replacement by aryl substituents. These new λ³‐iodanes are produced by treating the NH‐imidazole with ArI(OAc)₂, and are converted to N1‐aryl‐5‐iodoimidazoles by a selective copper‐catalyzed aryl migration. The method tolerates a variety of aryl fragments and is also applicable to substituted imidazoles.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

N,N,N‐Trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate a precursor for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[18F]‐fluoronicotinate

The synthesis, recrystallization, and X‐ray deterimination of N,N,N‐trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate (PyTFP‐precursor), C₁₅H₁₃F₄N₂O₂⁺·CF₃SO₃⁻, is described. This triflate salt precursor is required for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[¹⁸F]‐fluoronicotinate ([¹⁸F]FPyTFP), a prosthetic group used to radiolabel peptides for positron emission tomography (PET), as peptides are increasingly being used as PET‐imaging probes in nuclear medicine. Radiolabeling of peptides is typically done using a `prosthetic group', a small synthon to which the radioisotope is attached in the first step, followed by attachment to the peptide in the second step. During the synthesis of the PyTFP‐precursor, displacement of a Cl atom with trimethylamine gas and anion replacement with a triflate counter‐ion is critical, as incomplete replacement would hinder radioisotopic incorporation of nucleophilic fluorine‐18 and result in diminished radiochemical yields. The structural determination of the PyTFP‐precursor by X‐ray crystallography helped confirm the anion exchange of chloride with triflate.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

In situ green synthesis of Cu‐Ni bimetallic nanoparticles supported on reduced graphene oxide as an effective and recyclable catalyst for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles

In the present work, for the first time we have designed a novel approach for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles using reduced graphene oxide (rGO) decorated with Cu‐Ni bimetallic nanoparticles (NPs). In situ synthesis of Cu/Ni/rGO nanocomposite was performed by a cost efficient, surfactant‐free and environmentally benign method using Crataegus azarolus var. aronia L. leaf extract as a stabilizing and reducing agent. Phytochemicals present in the extract can be used to reduce Cu²⁺ and Ni²⁺ ions and GO to Cu NPs, Ni NPs and rGO, respectively. Analyses by means of FT‐IR, UV–Vis, EDS, TEM, FESEM, XRD and elemental mapping confirmed the Cu/Ni/rGO formation and also FT‐IR, NMR, and mass spectroscopy as well as elemental analysis were used to characterize the tetrazoles. The Cu/Ni/rGO nanocomposite showed the superior catalytic activity for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles within a short reaction time and high yields. Furthermore, this protocol eliminates the need to handle HN₃.     

A dihydroxidotetracopper(II) framework supported by 4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole) and benzene‐1,3,5‐tricarboxylate bridges

The new bifunctional ligand 4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole) (tr₂ad) and benzene‐1,3,5‐tricarboxylate sustain complementary coordination bridging for the three‐dimensional framework of poly[[bis[μ₃‐4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole)‐κ³N¹:N²:N^1′]bis(μ₄‐benzene‐1,3,5‐tricarboxylato‐κ⁴O¹:O^1′:O³:O⁵)di‐μ₃‐hydroxido‐κ⁶O:O:O‐tetracopper(II)] dihydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₄H₁₈N₆)₂]·2H₂O}_n. The net node is a centrosymmetric (μ₃‐OH)₂Cu₄ cluster [Cu—O = 1.9525 (14)–2.0770 (15) Å and Cu...Cu = 3.0536 (5) Å] involving two independent copper ions in tetragonal pyramidal CuO₄N and trigonal bipyramidal CuO₃N₂ environments. One carboxylate group of the anion is bridging and the other two are monodentate, leading to the connection of three hydroxide clusters and the generation of neutral coordination layers separated by 9.3583 (5) Å. The interlayer linkage is effected by μ₃‐tr₂ad ligands, with one triazole group N¹:N²‐bridging and the second monodentate [Cu—N = 1.9893 (19), 2.010 (2) and 2.411 (2) Å]. In total, the hydroxide clusters are linked to six close neighbors within the carboxylate layer and to four neighbors via tr₂ad bridges. Hydrogen bonding of solvent water molecules to noncoordinated triazole N atoms and carboxylate groups provides two additional links for the net, which adopts a 12‐connected topology corresponding to hexagonal closest packing. The study also introduces a new type of bis(triazole) ligand, which may find wider applications for supramolecular synthesis.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

Potassium‐Ion‐Assisted Regeneration of Active Cyano Groups in Carbon Nitride Nanoribbons: Visible‐Light‐Driven Photocatalytic Nitrogen Reduction

As a metal‐free nitrogen reduction reaction (NRR) photocatalyst, g‐C₃N₄ is available from a scalable synthesis at low cost. Importantly, it can be readily functionalized to enhance photocatalytic activities. However, the use of g‐C₃N₄‐based photocatalysts for the NRR has been questioned because of the elusive mechanism and the involvement of N defects. This work reports the synthesis of a g‐C₃N₄ photocatalyst modified with cyano groups and intercalated K⁺ (mCNN), possessing extended visible‐light harvesting capacity and superior photocatalytic NRR activity (NH₃ yield: 3.42 mmol g^?1 h^?1). Experimental and theoretical studies suggest that the ‐C≡N in mCNN can be regenerated through a pathway analogous to Mars van Krevelen process with the aid of the intercalated K⁺. The results confirm that the regeneration of the cyano group not only enhances photocatalytic activity and sustains the catalytic cycle, but also stabilizes the photocatalyst.     

Ultrasound‐Assisted Synthesis of 6‐Methyl‐1,2,3,4‐tetrahydro‐N‐aryl‐2‐oxo/thio‐4‐arylpyrimidine‐5‐carboxamides Catalyzed by Uranyl Nitrate Hexahydrate

An efficient and simple method developed for the synthesis of 6‐methyl‐1,2,3,4‐tetrahydro‐N‐aryl‐2‐oxo/thio‐4‐arylpyrimidine‐5‐carboxamide derivatives ( 4a‐o ) using UO₂(NO₃)₂.6H₂O catalyst under conventional and ultrasonic conditions. The ultrasound irradiation synthesis had shown several advantages such as milder conditions, shorter reaction times and higher yields. The structures of all the newly synthesized compounds have been confirmed by FT‐IR, ¹H NMR, ¹³C NMR and mass spectra.     

Synthesis,structural characterization and thermal properties of a new copper(II) one‐dimensional coordination polymer based on bridging N,N′‐bis(2‐hydroxybenzylidene)‐2,2‐dimethylpropane‐1,3‐diamine and dicyanamide ligands

The design and synthesis of polymeric coordination compounds of 3d transition metals are of great interest in the search for functional materials. The coordination chemistry of the copper(II) ion is of interest currently due to potential applications in the areas of molecular biology and magnetochemistry. A novel coordination polymer of Cu^II with bridging N,N′‐bis(2‐hydroxyphenyl)‐2,2‐dimethylpropane‐1,3‐diamine (H₂L‐DM) and dicyanamide (dca) ligands, catena‐poly[[[μ₂‐2,2‐dimethyl‐N,N′‐bis(2‐oxidobenzylidene)propane‐1,3‐diamine‐1:2κ⁶O,N,N′,O′:O,O′]dicopper(II)]‐di‐μ‐dicyanamido‐1:2′κ²N¹:N⁵;2:1′κ²N¹:N⁵], [Cu₂(C₁₉H₂₀N₂O₂)(C₂N₃)₂]_n, has been synthesized and characterized by CHN elemental analysis, IR spectroscopy, thermal analysis and X‐ray single‐crystal diffraction analysis. Structural studies show that the Cu^II centres in the dimeric asymmetric unit adopt distorted square‐pyramidal geometries, as confirmed by the Addison parameter (τ) values. The chelating characteristics of the L‐DM²⁻ ligand results in the formation of a Cu^II dimer with a double phenolate bridge in the asymmetric unit. In the crystal, the dimeric units are further linked to adjacent dimeric units through μ_1,5‐dca bridges to produce one‐dimensional polymeric chains.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

Structural studies of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine hetero‐scorpionate copper complexes

The structures of five compounds consisting of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine complexed with copper in both the Cu^I and Cu^II oxidation states are presented, namely chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(I) 0.18‐hydrate, [CuCl(C₁₅H₁₇N₃)]·0.18H₂O, (1), catena‐poly[[copper(I)‐μ₂‐(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ⁵N,N′,N′′:C²,C³] perchlorate acetonitrile monosolvate], {[Cu(C₁₅H₁₇N₃)]ClO₄·CH₃CN}_n, (2), dichlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) dichloromethane monosolvate, [CuCl₂(C₁₅H₁₇N₃)]·CH₂Cl₂, (3), chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) perchlorate, [CuCl(C₁₅H₁₇N₃)]ClO₄, (4), and di‐μ‐chlorido‐bis({(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II)) bis(tetraphenylborate), [Cu₂Cl₂(C₁₅H₁₇N₃)₂][(C₆H₅)₄B]₂, (5). Systematic variation of the anion from a coordinating chloride to a noncoordinating perchlorate for two Cu^I complexes results in either a discrete molecular species, as in (1), or a one‐dimensional chain structure, as in (2). In complex (1), there are two crystallographically independent molecules in the asymmetric unit. Complex (2) consists of the Cu^I atom coordinated by the amine and pyridyl N atoms of one ligand and by the vinyl moiety of another unit related by the crystallographic screw axis, yielding a one‐dimensional chain parallel to the crystallographic b axis. Three complexes with Cu^II show that varying the anion composition from two chlorides, to a chloride and a perchlorate to a chloride and a tetraphenylborate results in discrete molecular species, as in (3) and (4), or a bridged bis‐μ‐chlorido complex, as in (5). Complex (3) shows two strongly bound Cl atoms, while complex (4) has one strongly bound Cl atom and a weaker coordination by one perchlorate O atom. The large noncoordinating tetraphenylborate anion in complex (5) results in the core‐bridged Cu₂Cl₂ moiety.     

Three novel topologically different metal–organic frameworks built from 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid

The design and synthesis of metal–organic frameworks (MOFs) have attracted much interest due to the intriguing diversity of their architectures and topologies. However, building MOFs with different topological structures from the same ligand is still a challenge. Using 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid (HL) as a new ligand, three novel MOFs, namely poly[[(N,N‐dimethylformamide‐κO)bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O,O′:N]cadmium(II)] N,N‐dimethylformamide monosolvate methanol monosolvate], {[Cd(C₁₂H₇N₂O₄)₂(C₃H₇NO)]·C₃H₇NO·CH₃OH}_n, ( 1 ), poly[[(μ₂‐acetato‐κ²O:O′)[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O:O′:N]bis[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ⁴O,O′:O′:N]dicadmium(II)] N,N‐dimethylacetamide disolvate monohydrate], {[Cd₂(C₁₂H₇N₂O₄)₃(CH₃CO₂)]·2C₄H₉NO·H₂O}_n, ( 2 ), and catena‐poly[[[diaquanickel(II)]‐bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ²O:N]] N,N‐dimethylacetamide disolvate], {[Ni(C₁₂H₇N₂O₄)₂(H₂O)₂]·2C₄H₉NO}_n, ( 3 ), have been prepared. Single‐crystal structure analysis shows that the Cd^II atom in MOF ( 1 ) has a distorted pentagonal bipyramidal [CdN₂O₅] coordination geometry. The [CdN₂O₅] units as 4‐connected nodes are interconnected by L^? ligands to form a fourfold interpenetrating three‐dimensional (3D) framework with a dia topology. In MOF ( 2 ), there are two crystallographically different Cd^II ions showing a distorted pentagonal bipyramidal [CdNO₆] and a distorted octahedral [CdN₂O₄] coordination geometry, respectively. Two Cd^II ions are connected by three carboxylate groups to form a binuclear [Cd₂(COO)₃] cluster. Each binuclear cluster as a 6‐connected node is further linked by acetate groups and L^? ligands to produce a non‐interpenetrating 3D framework with a pcu topology. MOF ( 3 ) contains two crystallographically distinct Ni^II ions on special positions. Each Ni^II ion adopts an elongated octahedral [NiN₂O₄] geometry. Each Ni^II ion as a 4‐connected node is linked by L^? ligands to generate a two‐dimensional network with an sql topology, which is further stabilized by two types of intermolecular OW—HW…O hydrogen bonds to form a 3D supramolecular framework. MOFs ( 1 )–( 3 ) were also characterized by powder X‐ray diffraction, IR spectroscopy and thermogravimetic analysis. Furthermore, the solid‐state photoluminescence of HL and MOFs ( 1 ) and ( 2 ) have been investigated. The photoluminescence of MOFs ( 1 ) and ( 2 ) are enhanced and red‐shifted with respect to free HL. The gas adsorption investigation of MOF ( 2 ) indicates a good separation selectivity (71) of CO₂/N₂ at 273 K (i.e. the amount of CO₂ adsorption is 71 times higher than N₂ at the same pressure).     

One‐step synthesis of 6‐acetamido‐3‐(N‐(2‐(dimethylamino) ethyl) sulfamoyl) naphthalene‐1‐yl 7‐acetamido‐4‐hydroxynaphthalene‐2‐sulfonate and its characterization with 1D and 2D NMR techniques

A one‐step method was reported for the synthesis of 6‐acetamido‐3‐(N‐(2‐(dimethylamino) ethyl) sulfamoyl) naphthalene‐1‐yl 7‐acetamido‐4‐hydroxynaphthalene‐2‐sulfonate by treating 7‐acetamido‐4‐hydroxy‐2‐naphthalenesulfonyl chloride with equal moles of N, N‐dimethylethylenediamine in acetonitrile in the presence of K₂CO₃. The chemical structure of the obtained compounds was characterized by MS, FTIR, ¹H NMR, ¹³C NMR, gCOSY, TOCSY, gHSQC, and gHMBC. The chemical shift differences of ¹H and ¹³C being δ 0.04 and 0.2, respectively, were unambiguously differentiated. Copyright © 2013 John Wiley & Sons, Ltd.     

A two‐dimensional mixed‐valence CuII/CuI coordination polymer constructed from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate

Coordination polymers are a thriving class of functional solid‐state materials and there have been noticeable efforts and progress toward designing periodic functional structures with desired geometrical attributes and chemical properties for targeted applications. Self‐assembly of metal ions and organic ligands is one of the most efficient and widely utilized methods for the construction of CPs under hydro(solvo)thermal conditions. 2‐(Pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate (HPIDC²⁻) has been proven to be an excellent multidentate ligand due to its multiple deprotonation and coordination modes. Crystals of poly[aquabis[μ₃‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ⁵N¹,O⁵:N³,O⁴:N²]copper(II)dicopper(I)], [Cu^IICu^I₂(C₁₀H₅N₃O₄)₂(H₂O)]_n, (I), were obtained from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PIDC) and copper(II) chloride under hydrothermal conditions. The asymmetric unit consists of one independent Cu^II ion, two Cu^I ions, two HPIDC²⁻ ligands and one coordinated water molecule. The Cu^II centre displays a square‐pyramidal geometry (CuN₂O₃), with two N,O‐chelating HPIDC²⁻ ligands occupying the basal plane in a trans geometry and one O atom from a coordinated water molecule in the axial position. The Cu^I atoms adopt three‐coordinated Y‐shaped coordinations. In each [CuN₂O] unit, deprotonated HPIDC²⁻ acts as an N,O‐chelating ligand, and a symmetry‐equivalent HPIDC²⁻ ligand acts as an N‐atom donor via the pyridine group. The HPIDC²⁻ ligands in the polymer serve as T‐shaped 3‐connectors and adopt a μ₃‐κ²N,O:κ²N′,O′:κN′′‐coordination mode, linking one Cu^II and two Cu^I cations. The Cu cations are arranged in one‐dimensional –Cu1–Cu2–Cu3– chains along the [001] direction. Further crosslinking of these chains by HPIDC²⁻ ligands along the b axis in a –Cu2–HPIDC²⁻–Cu3–HPIDC²⁻–Cu1– sequence results in a two‐dimensional polymer in the (100) plane. The resulting (2,3)‐connected net has a (12³)₂(12)₃ topology. Powder X‐ray diffraction confirmed the phase purity for (I), and susceptibilty measurements indicated a very weak ferromagnetic behaviour. A thermogravimetric analysis shows the loss of the apical aqua ligand before decomposition of the title compound.     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

Synthesis and ring‐opening (co)polymerization of L‐lysine N‐carboxyanhydrides containing labile side‐chain protective groups

This contribution describes the synthesis and ring‐opening (co)polymerization of several L ‐lysine N‐carboxyanhydrides (NCAs) that contain labile protective groups at the ?‐NH₂ position. Four of the following L ‐lysine NCAs were investigated: N^?‐trifluoroacetyl‐L ‐lysine N‐carboxyanhydride, N^?‐(tert‐butoxycarbonyl)‐L ‐lysine N‐carboxyanhydride, N^?‐(9‐fluorenylmethoxycarbonyl)‐L ‐lysine N‐carboxyanhydride, and N^?‐(6‐nitroveratryloxycarbonyl)‐L ‐lysine N‐carboxyanhydride. In contrast to the harsh conditions that are required for acidolysis of benzyl carbamate moieties, which are usually used to protect the ?‐NH₂ position of L ‐lysine during NCA polymerization, the protective groups of the L ‐lysine NCAs presented here can be removed under mildly acidic or basic conditions or by photolysis. As a consequence, these monomers may allow access to novel peptide hybrid materials that cannot be prepared from ?‐benzyloxycarbonyl‐L ‐lysine N‐carboxyanhydride (Z‐Lys NCA) because of side reactions that accompany the removal of the Z groups. By copolymerization of these L ‐lysine NCAs with labile protective groups, either with each other or with γ‐benzyl‐L ‐glutamate N‐carboxyanhydride or Z‐Lys NCA, orthogonally side‐chain‐protected copolypeptides with number‐average degrees of polymerization ≤20 were obtained. Such copolypeptides, which contain different side‐chain protective groups that can be removed independently, are interesting for the synthesis of complex polypeptide architectures or can be used as scaffolds for the preparation of synthetic antigens or protein mimetics. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1167–1187, 2003