Gallium Oxide Nanorods: Novel,Template‐Free Synthesis and High Catalytic Activity in Epoxidation Reactions

Gallium oxide nanorods with unprecedented small dimensions (20–80 nm length and 3–5 nm width) were prepared using a novel, template‐free synthesis method. This nanomaterial is an excellent heterogeneous catalyst for the sustainable epoxidation of alkenes with H₂O₂, rivaling the industrial benchmark microporous titanosilicate TS‐1 with linear alkenes and being much superior with bulkier substrates. A thorough characterization study elucidated the correlation between the physicochemical properties of the gallium oxide nanorods and their catalytic performance, and underlined the importance of the nanorod morphology for generating a material with high specific surface area and a high number of accessible acid sites.     

Expanding the Applications of the Ilmenite Mineral to the Preparation of Nanostructures: TiO2 Nanorods and their Photocatalytic Properties in the Degradation of Oxalic Acid

The mineral ilmenite is one of the most abundant ores in the Earth′s crust and it is the main source for the industrial production of bulk titanium oxide. At the same time, methods to convert ilmenite into nanostructures of TiO₂ (which are required for new advanced applications, such as solar cells, batteries, and photocatalysts) have not been explored to any significant extent. Herein, we describe a simple and effective method for the preparation of rutile TiO₂ nanorods from ball‐milled ilmenite. These nanorods have small dimensions (width: 5–20 nm, length: 50–100 nm, thickness: 2–5 nm) and possess large specific surface areas (up to 97 m² g^?1). Dissolution/hydrolysis/precipitation is proposed as a growth mechanism. The nanorods were found to have attractive photocatalytic properties in the degradation of oxalic acid. Their photocatalytic activity is close to that of the benchmark Degussa P25 material and better than that of a commercial high‐surface‐area rutile powder.     

One‐Step Solvothermal Synthesis of Single‐Crystalline TiOF2 Nanotubes with High Lithium‐Ion Battery Performance

Single‐crystalline TiOF₂ nanotubes were prepared by a one‐step solvothermal method. The nanotubes are rectangular in shape with a length of 2–3 μm, width of 200–300 nm, and wall thickness of 40–60 nm. The formation of TiOF₂ nanotubes is directly driven by the interaction between TiF₄ and oleic acid in octadecane to form the 1D nanorods, and this is followed by a mass diffusion process to form the hollow structures. The synthesis approach can be extended to grow TiOF₂ nanoparticles and nanorods. Compared with TiO₂, which is the more commonly considered anode material in lithium‐ion batteries, TiOF₂ has the advantages of a lower Li‐intercalation voltage (e.g., to help increase the total voltage of the battery cell) and higher specific capacities. The TiOF₂ nanotubes showed good Li‐storage properties with high specific capacities, stable cyclabilities, and good rate capabilities.     

Formation of Eu2O3 Nanorods through Solvothermal Routes by Surfactant Assistance

Eu₂O₃nanorods were synthesized and characterized. The crystallites of Eu₂O(CO₃)₂·H₂O nanorods and Eu₂O₃ nanorods were obtained by means of surfactant assistance, with aqueous butanol solution as the solvent and hexamethylene tetramine as the base. The characteristics of the nanorods were analyzed by transmission electron microscopy, high‐resolution transmission electron microscopy, scanning electron microscopy and X‐ray diffraction. The Eu₂O₃ nanorod is about 80–300 nm in diameter and 1–5 µm in length. The formation mechanism of the 1D products was also proposed.     

Synthesis and optical properties of poly (vinyl acetate)/bismuth oxide nanorods

Poly (vinyl acetate) (PVAc) loaded bismuth oxide (Bi₂O₃) nanorods were successfully prepared at ambient pressure. X‐ray diffraction (XRD) and transmission electron microscopy were used to characterize the final product. It was found that Bi₂O₃ nanorods were formed and the diameter of the rods was confined to about 8 nm. The diameter and length of formed rods were found to increase by increasing the bismuth oxide concentration in the PVAc matrix. The optical properties of the nanocomposite films were characterized from the analysis of the experimentally recorded transmittance and reflectance data in the spectral wavelength range of 300–800 nm. The values of some important parameters of the studied films are determined such as refractive index (n), extinction coefficient (k), optical absorption coefficient (α), and band energy gap (E_g). According to the analysis of dispersion curves, it has been found that the dispersion data obeyed the single oscillator of the Wemple–DiDomenico model, from which the dispersion parameters and high‐frequency dielectric constant were determined. In such work, from the transmission spectra, the dielectric constant (ε_∞) and the third‐order optical nonlinear susceptibility χ⁽³⁾ were determined. Copyright © 2010 John Wiley & Sons, Ltd.     

Fabrication of CoO nanorods via thermal decomposition of CoC2O4 precursor

Cobalt oxide (CoO) nanorods were synthesized by annealing CoC₂O₄ precursor. The nanorods were identified by Transmission electron microscopy (TEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and other methods. The results showed that the nanorods are composed of cubic CoO with diameter of 10–80 nm, and lengths ranging from 1 to 3 μm. The mechanism of formation of CoO nanorods was also discussed.     

Sodium-doped vanadium oxide nanorods

Sodium-Doped vanadium oxide nanorods of composition Na_0.44V₂O₅ · 1.6H₂O were manufactured under hydrothermal conditions (T = 150-180°C, τ = 30–50 h). Particle diameters are 20–80 nm; lengths are 0.25–1.5 μm. Particles have a layered structure with interlayer distances of 10.71 ± 0.03 Å. X-ray photoelectron and IR spectra, electrical conductivity, and thermal properties of nanorods were studied.     

β‐AgVO3 Nanorods as Peroxidase Mimetic for Colorimetric Determination of Glucose

β‐AgVO₃ nanorods have been demonstrated to exhibit intrinsic peroxidase‐like activity. The oxidation of glucose can be catalyzed by glucose oxidase (GOx ) to generate H₂O₂ in the presence of O₂ . The β‐AgVO₃ nanorods can catalytically oxidize peroxidase substrates including o‐phenylenediamine (OPD ), 3,3′,5,5′‐tetramethylbenzidine (TMB ), and diammonium 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonate) (ABTS ) by H₂O₂ to produce typical color reactions: OPD from colorless to orange, TMB from colorless to blue, and ABTS from colorless to green. The catalyzed reaction by the β‐AgVO₃ nanorods was found to follow the characteristic Michaelis–Menten kinetics. Compared with horseradish peroxidase and AgVO₃ nanobelts, β‐AgVO₃ nanorods showed a higher affinity for TMB with a lower Michaelis–Menten constant (K _m) value (0.04118 mM ) at the optimal condition. Taking advantage of their high catalytic activity, the as‐synthesized β‐AgVO₃ nanorods were utilized to develop a colorimetric sensor for the determination of glucose. The linear range for glucose was 1.25–60 μM with the lower detection limit of 0.5 μM . The simple and sensitive GOx ‐β–AgVO₃ nanorods–TMB sensing system shows great promise for applications in the pharmaceutical, clinical, and biosensor detection of glucose.     

Titanium-doped vanadium oxide nanorods

Titanium-doped vanadium oxide nanorods of composition V_0.95Ti_0.05O_2.33(C₆H₄)_0.12 are hydrothermally manufactured from the V_1.67Ti_0.33O_4.84 · nH₂O gel/hydroquinone (HQ) composite for 30–50 h at 150–180°C. The outer diameters of the nanoparticles are 20–40 nm, and their lengths are 150–300 nm. The X-ray photoelectron spectra, IR spectra, electrical conductivity, and thermal properties of the compound are investigated. When poly(vinyl alcohol) (PVA) is added to the gel instead of HQ, single nanorods 35 nm in diameter and 500 nm long, oval nanoparticles, and fibrous species are formed. The composition and structural characteristics of these oxides have not been determined.     

Synthesis of Nanorods of Crystalline Co3O4Using Carbon Nanotubes as Templates

ＩｎｔｒｏｄｕｃｔｉｏｎＭａｔｅｒｉａｌｓｂａｓｅｄｏｎｃｏｂａｌｔｏｘｉｄｅｓｈａｖｅａｔｔｒａｃｔｅｄａｇｒｅａｔｉｎｔｅｒｅｓｔｉｎｖｉｅｗｏｆｔｈｅｉｒｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉｏｎｓｉｎｓｃｉｅｎｔｉｆｉｃａｎｄｔｅｃｈｎｏｌｏｇｉｃａｌｆｉｅｌｄｓ .1Ｔｈｅｙｈａｖｅｂｅｅｎｕｓｅｄｆｏｒｔｈｅｐｒｏｄｕｃｔｉｏｎｏｆｓｏｌｉｄ ｓｔａｔｅｓｅｎｓｏｒｓ ,2 ｈｅｔｅｒｏｇｅｎｅｏｕｓｃａｔａｌｙｓｔｓ ,3ｅｌｅｃｔｒｏｃｈｒｏｍｉｃｄｅｖｉｃｅｓ (ＥＣＤｓ) 4ａｎｄａｓｉｎｔｅ…     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

A Vanadium(V) Oxide Nanorod Promoted Platinum/Reduced Graphene Oxide Electrocatalyst for Alcohol Oxidation under Acidic Conditions

A Pt‐V₂O₅/rGO ternary hybrid electrocatalyst was designed by using active vanadium(V) oxide (V₂O₅) nanorods and reduced graphene oxide (rGO) components. The V₂O₅ nanorods were synthesized by a simple polyol‐assisted solvothermal method and were incorporated uniformly onto rGO sheets by intermittent microwave heating. Subsequently, Pt nanoparticles (2–3 nm in size) were deposited over the V₂O₅/rGO composite by the conventional polyol reflux method. The electrocatalytic performance of the Pt‐V₂O₅/rGO ternary hybrid and bare Pt/rGO catalysts towards the oxidation of simple alcohols was evaluated in acidic media. The ternary hybrid catalyst exhibited higher electrocatalytic activity than bare Pt/rGO and also showed good stability. The higher electrocatalytic activity of the Pt‐V₂O₅/rGO ternary hybrid was attributed to a synergistic effect among the Pt, V₂O₅, and rGO components. In addition, oxygen‐containing species, such as OH groups, were generated on V₂O₅ at lower potentials. These groups were able to scavenge intermediate species such as CO_ads on the Pt surfaces and helped to regenerate the active sites on the Pt surface more effectively for the routine alcohol oxidation reaction.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced photocatalytic activity of cobalt-doped CeO2 nanorods

In this paper, CeO₂ and cobalt-doped CeO₂ nanorods synthesized by surfactant free co-precipitation method. The microstructures of the synthesized products were characterized by XRD, FESEM and TEM. The structural properties of the grown nanorods have been investigated using electron diffraction and X-ray diffraction. High resolution transmission electron microscopy studies show the polycrystalline nature of the Co-doped cerium oxide nanorods with a length of about 300?nm and a diameter of about 10?nm were produced. The X-ray Photoelectron spectrum confirms the presence of cobalt in cerium oxide nanorods. From BET, the specific surface area of the CeO₂ (Co-doped) nanostructures (131 m²?g^??) is found to be significantly higher than that of pure CeO₂ (52 m²?g^??). The Co-doped cerium nanorods exhibit an excellent photocatalytic performance in rapidly degrading azodyes acid orange 7 (AO7) in aqueous solution under UV illumination.     

Radical Cyclization Reactions via Manganese(III) Acetate Leading to 2‐Thienyl‐Substituted Dihydrofuran Compounds

The 2‐thienyl‐substituted 4,5‐dihydrofuran derivatives 3 – 8 were obtained by the radical cyclization reaction of 1,3‐dicarbonyl compounds 1a – 1f with 2‐thienyl‐substituted conjugated alkenes 2a – 2e by using [Mn(OAc)₃] (Tables 1–5). In this study, reactions of 1,3‐dicarbonyl compounds 1a – 1e with alkenes 2a – 2c gave 4,5‐dihydrofuran derivatives 3 – 5 in high yields (Tables 1–3). Also the cyclic alkenes 2d and 2e gave the dihydrobenzofuran compounds, i.e., 6 and 7 in good yields (Table 4). Interestingly, the reaction of benzoylacetone (=1‐phenylbutane‐1,3‐dione; 1f ) with some alkenes gave two products due to generation of two stable carbocation intermediates (Table 5).     

Porous cobalt oxide (Co3O4) nanorods: Facile syntheses, optical property and application in lithium-ion batteries

We developed a facile synthetic route of porous cobalt oxide (Co₃O₄) nanorods via a microemulsion-based method in combination with subsequent calcination process. The porous structure was formed by controlled decomposition of the microemulsion-synthesized precursor CoC₂O₄ nanorods without destruction of the original morphology. The as-prepared Co₃O₄ nanorods, consisting of small nanoparticles with diameter of 80–150 nm, had an average diameter of 200 nm and a length of 3–5 μm. The morphology and structure of synthesized samples were characterized by transmission electron microscopy and scanning electron microscopy. The phase and composition were investigated by X-ray powder diffraction and X-ray photoelectron spectroscopy. The optical property of Co₃O₄ nanorods was investigated. Moreover, the porous Co₃O₄ nanorods exhibited high electrochemical performance when applied as cathode materials for lithium-ion batteries, which gives them good potential applications.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Photoanode Based on Chain‐Shaped Anatase TiO2 Nanorods for High‐Efficiency Dye‐Sensitized Solar Cells

Anatase TiO₂ nanorods with large specific surface areas and high crystallinity have been synthesized by surfactant‐free hydrothermal treatment of water‐soluble peroxotitanium acid (PTA). X‐ray diffraction and TEM analysis showed that all TiO₂ nanorods derived from PTA in different hydrothermal processes were in the anatase phase, and high aspect ratio TiO₂ nanorods with chain‐shaped structures were formed at 150 °C for 24 h by oriented growth. The nanorods were fabricated as photoanodes for high‐efficiency dye‐sensitized solar cells (DSSCs). DSSCs fabricated from the chain‐shaped TiO₂ nanorods gave a highest short‐circuit current density of 14.8 mA cm^?2 and a maximum energy conversion efficiency of 7.28 %, as a result of the presence of far fewer surface defects and grain boundaries than are present in commercial P25 TiO₂ nanoparticles. Electrochemical impedance spectroscopy also confirmed that DSSCs based on the TiO₂ nanorods have enhanced electron transport properties and a long electron lifetime.     

Controllable Synthesis of Mesoporous Iron Oxide Nanoparticle Assemblies for Chemoselective Catalytic Reduction of Nitroarenes

Iron(III) oxide is a low‐cost material with applications ranging from electronics to magnetism, and catalysis. Recent efforts have targeted new nanostructured forms of Fe₂O₃ with high surface area‐to‐volume ratio and large pore volume. Herein, the synthesis of 3D mesoporous networks consisting of 4–5 nm γ‐Fe₂O₃ nanoparticles by a polymer‐assisted aggregating self‐assembly method is reported. Iron oxide assemblies obtained from the hybrid networks after heat treatment have an open‐pore structure with high surface area (up to 167 m² g^?1) and uniform pores (ca. 6.3 nm). The constituent iron oxide nanocrystals can undergo controllable phase transition from γ‐Fe₂O₃ to α‐Fe₂O₃ and to Fe₃O₄ under different annealing conditions while maintaining the 3D structure and open porosity. These new ensemble structures exhibit high catalytic activity and stability for the selective reduction of aryl and alkyl nitro compounds to the corresponding aryl amines and oximes, even in large‐scale synthesis.     

Synthesis and In Vitro Bioactivity of TiO2 Nanorods

Titanium dioxide (TiO₂) powders were synthesized by the hydrothermal method. The TiO₂ powders were composed of nanorods with dimensions of 10–18 nm and 60–180 nm in diameter and length, respectively. The in vitro bioactivity of the TiO₂ powders was examined by evaluation of hydroxyapatite (HAp) formation ability in simulated body fluid (SBF). The results showed that TiO₂ nanorods induced the formation of nanocrystalline HAp after soaking in SBF after 1 day rapidly. Our study indicates that TiO₂ nanorods are bioactive and might be used for preparation of new biomaterials.