One‐Pot Three‐Component Synthesis of Highly Functionalized 2,3‐Dihydro‐1,3‐dioxo‐1H,5H‐pyrazolo[1,2‐a][1,2,4]triazoles

The reactive 1 : 1 zwitterionic intermediate formed by the addition of isocyanides to dialkyl acetylenedicarboxylates was trapped with 4‐arylurazoles to produce the highly functionalized pyrazolo[1,2‐a][1,2,4]triazoles 5 in good yields (Table). The structures of the products 5a – h were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR), by EI‐MS, and elemental analysis. A possible mechanism for this reaction is proposed (Scheme).     

Quantum‐chemical,IR, NMR,and X‐ray diffraction studies on 2‐(4‐chlorophenyl)‐1‐methyl‐ 1H‐benzo[d]imidazole

The title molecule, 2‐(4‐chlorophenyl)‐1‐methyl‐1H‐benzo[d]imidazole (C₁₄H₁₁ClN₂), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, and single‐crystal X‐ray diffraction. The molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) ¹H and ¹³C NMR chemical shift values of the title compound in the ground state have been calculated by using the Hartree‐Fock (HF) and density functional theory (DFT/B3LYP) method with 6‐31G(d) basis sets, and compared with the experimental data. The calculated results show that the optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies and GIAO ¹H and ¹³C NMR chemical shifts show good agreement with experimental values. The energetic behavior of the title compound in solvent media has been examined using B3LYP method with the 6‐31G(d) basis set by applying the Onsager and the polarizable continuum model (PCM). Besides, molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis, and nonlinear optical (NLO) properties of the title compound were investigated by theoretical calculations. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

Curing chemistry of phenylethynyl‐terminated imide oligomers: Synthesis of 13C‐labeled oligomers and solid‐state NMR studies

4‐(Phenylethynyl‐α,β‐¹³C)phthalic anhydride (PEPA) and ¹³C‐labeled phenylethynyl‐terminated imide (PETI) oligomers were synthesized, and solid‐state ¹³C nuclear magnetic resonance (NMR) spectroscopy was used to determine the structure of cured oligomers. Solid‐state ¹³C NMR spectra were collected before and after thermal curing. Using solid‐state ¹³C NMR difference spectroscopy, several cure products were identified. The observed ¹³C NMR resonances were assigned to four different classes of cure products: aromatics, products from backbone addition (substituted stilbenes and tetraphenylethanes), polyenes, and cyclobutadiene cyclodimers. The effects of postcuring and oligomer chain length on the structure of the cured resins were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3486–3497, 2000     

Solid‐State and Solution Structural Studies of 4‐{[C(E)]‐1H‐Azol‐1‐ylimino)methyl}pyridin‐3‐ols

The new N‐salicylideneheteroarenamines 1 – 4 were prepared by reacting the biologically relevant 3‐hydroxy‐4‐pyridinecarboxaldehyde ( 5 ) with 1H‐imidazol‐1‐amine ( 6 ), 1H‐pyrazol‐1‐amine ( 7 ), 1H‐1,2,4‐triazol‐1‐amine ( 8 ), and 1H‐1,3,4‐triazol‐1‐amine ( 9 ). Solution ¹H‐, ¹³C‐, and ¹⁵N‐NMR were used to establish that the hydroxyimino form A is the predominant tautomer. A combination of ¹³C‐ and ¹⁵N‐CPMAS‐NMR with X‐ray crystallographic studies confirms that the same form is present in the solid state. The stabilities and H‐bond geometries of the different forms, tautomers and rotamers, are discussed by using B3LYP/6‐31G** calculations.     

A Red‐Emissive Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Duplex Bearing Perylene Diimide Fluorophores for Warm‐White Organic Light‐Emitting Diode Application

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular duplex bearing red‐emitting perylene diimide (PDI) fluorophores, namely PDIHB , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³C NMR, TOF‐MS and 2D NMR. Compared with the small molecular reference compound PDI , PDIHB shows one time enhanced fluorescence efficiency in solid state (4.1% vs. 2.1%). More importantly, the presence of bulky HB oligoamide strands in PDIHB could trigger effective spatial separation between guest and host fluorophores in thin solid film state, hence inefficient energy transfer occurs between the blue‐emitting host 2TPhNIHB and red guest PDIHB in the 2 wt% guest/host blending film. As a result, a solution‐processed organic light‐emitting diode (OLED) with quite simple device structure of ITO/PEDOT:PSS (40 nm)/PVK (40 nm)/ PDIHB (2 wt%): 2TPhNIHB (50 nm)/LiF (0.8 nm)/Al (100 nm) could emit bias‐independent warm‐white electroluminescence with stable Commission Internationale de L'Eclairage coordinates of (0.42, 0.33), and the maximum brightness and current efficiency of this device are 260 cd·m^?2 and 0.49 cd·A^?1, respectively. All these results indicated that HB self‐assembly supramolecular fluorophores could act as prospective materials for white OLED application.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Structural studies on aryl‐substituted enaminoketones and their thio analogues. Part I. Analysis of high‐resolution 1H, 13C NMR and 13C CP MAS spectra combined with GIAO‐DFT calculations

A series of aryl‐substituted enaminoketones and their thio analogues in CDCl₃ solution and in the solid state were studied by the use of high‐resolution ¹H and ¹³C as well as ¹³C cross polarization magic angle spinning (CP MAS) NMR spectra in combination with gauge including atomic orbitals‐density functional theory (GIAO‐DFT) calculations performed at the B3PW91/6–311 + + G(d,p) level of theory using the B3PW91/6‐311 + + G(d,p)‐optimized geometries. The analysis of the ¹³C NMR spectra in solution was done by using the Incredible Natural Abundance DoublE QUAntum Transfer Experiment (INADEQUATE) technique, whereas trends observed in the ¹³C shielding constants, calculated for the compounds studied, were a great help in assigning most of the signals in the ¹³C CP MAS NMR spectra. It was established on the basis of the experimental and theoretical NMR data that both groups of compounds exist in the form of Z‐s‐Z‐s‐E isomers in CDCl₃ solution as well as in the solid state, with the NH hydrogen atom involved in intramolecular hydrogen bonding. This conclusion is in agreement with the fact that some of the compounds studied reveal liquid‐crystalline properties. Three‐bond H, H and C, H coupling constants measured in solution played a crucial role in the structure elucidation. Copyright © 2009 John Wiley & Sons, Ltd.     

GIAO/DFT studies on 1,2,4‐triazole‐5‐thiones and their propargyl derivatives

Density functional theory (DFT)/Becke–Lee–Yang–Parr (B3LYP) and gauge‐including atomic orbital (GIAO) calculations were performed on a number of 1,2,4‐triazole derivatives, and the optimized structural parameters were employed to ascertain the nature of their predominant tautomers. ¹³C and ¹⁵N NMR chemical shifts of 3‐substituted 1,2,4‐triazole‐5‐thiones and their propargylated derivatives were calculated via GIAO/DFT approach at the B3LYP level of theory with geometry optimization using a 6‐311++G** basis set. A good agreement between theoretical and experimental ¹³C and ¹⁵N NMR chemical shifts could be found for the systems investigated. The data generated were useful in predicting ¹⁵N chemical shifts of all the nitrogen atoms of the triazole ring, some of which could not be obtained in solution state ¹⁵N HMBC/HSQC NMR measurements. The energy profile computed for the dipropargylated derivatives was found to follow the product distribution profile of regioisomers formed during propargylation of 1,2,4‐triazole thiones. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular complexes between π‐excedent heterocycles (indoles and carbazole) and π‐deficient polynitrobenzenes

Five charge‐transfer complexes 1–5 derived from indoles (including a carbazole) and halogenopolynitrobenzenes (ClDNB, FDNB, ClTNB) as well as their individual components have been studied in the solid state by ¹³C CPMAS NMR. The stacking effects on the ¹³C chemical shifts have been rationalized by means of M05‐2X functional and GIAO/B3LYP/6‐311 ++G(d,p) calculations. The results, although only semiquantitative, are very promising for studying such structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Solid‐State Synthesis and Characterization of 2‐Thioxo‐4‐Imidazolidinone Derivatives

A new and efficient two‐step solid‐state synthesis method is described for 2‐thioxo‐4‐imidazolidinone from aryl isothiocyanate and free amino acid. This method requires only simple equipment and is easy to perform. The products reported were characterized on the basis of IR, MS, ¹H NMR, ¹³C NMR and elemental analysis.     

Ammonolysis of 1,2‐Bis[dichloro(methyl)silyl]ethane. On the Structure of 1,3,6,8‐Tetramethyl‐2,7,11,12‐tetraaza‐1,3,6,8‐tetrasila‐tricyclo[6.2.1.13,6]‐dodecane

Ammonolysis of 1,2‐bis[dichloro(methyl)silyl]ethane afforded a crystalline tricyclic silazane along with polymeric material. The crystalline material could be isolated in pure state. It was analyzed by ¹H, ¹³C, ¹⁵N and ²⁹Si NMR spectroscopy in solution, by ¹³C, ¹⁵N and ²⁹Si MAS NMR spectroscopy in the solid state, as well as by single‐crystal and powder X‐ray diffraction. The title compound exists as a single isomer in solution, whereas in the solid state the presence of several modifications is indicated, in particular by the solid‐state MAS NMR spectra.     

Experimental and quantum chemical calculational studies on N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐hydrazine

The title molecule, N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐ hydrazine (C₂₀ H₂₀ N₄ S₁), was characterized by ¹H‐NMR, ¹³C‐NMR, IR, UV‐visible, and X‐ray determination. In addition to the molecular geometry from X‐ray experiment, the molecular geometry, vibrational frequencies and gauge including atomic orbital ¹H‐ and ¹³C‐NMR chemical shift values of the title compound in the ground state have been calculated using the Hartree‐Fock and density functional method (B3LYP) with 6‐31G(d, p) basis set. The calculated results show that optimized geometries can well reproduce the crystal structural parameters. By using time‐dependent density functional theory method, electronic absorption spectrum of the title compound has been predicted. © 2011 Wiley Periodicals, Inc.     

Experimental and theoretical investigation of the molecular and electronic structure of N′‐benzylidene‐N‐[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐chloro‐acetic acid hydrazide

The title compound, N′‐benzylidene‐N‐[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐chloro‐acetic acid hydrazide, has been synthesized and characterized by elemental analysis, IR, ¹H and ¹³C NMR, and X‐ray single crystal diffraction. The compound crystallizes in the orthorhombic space group P 21 21 21 with a = 5.8671 (3) Å, b = 17.7182 (9) Å, and c = 20.6373 (8) Å. Moreover, the molecular geometry from X‐ray experiment, the molecular geometry, vibrational frequencies, and gauge‐including atomic orbital ¹H and ¹³C chemical shift values of the title compound in the ground state have been calculated by using the Hartree–Fock and density functional methods (B3LYP) with 6‐31G(d) and 6‐31G(d,p) basis sets. The results of the optimized molecular structure are exhibited and compared with the experimental X‐ray diffraction. Besides, molecular electrostatic potential, Frontier molecular orbitals, and thermodynamic properties of the title compound were determined at B3LYP/6‐31G(d) levels of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Synthesis of 9,9‐bis(4‐aminophenyl)fluorene‐based benzoxazine and properties of its high‐performance thermoset

A benzoxazine ( P‐bapf ) based on 9,9‐bis(4‐aminophenyl)fluorene (BAPF), phenol, and formaldehyde was successfully prepared using two‐pot and one‐pot procedures. In the two‐pot approach, BAPF initially reacted with 2‐hydroxybenzaldehyde, leading to 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene. The imine linkages of 9,9‐bis(4‐(2‐hydroxybenzylideneimino)phenyl)fluorene were then reduced by sodium borohydride, forming 9,9‐bis(4‐(2‐hydroxybenzylamino)phenyl)fluorene. Finally, paraformaldehyde was added to induce ring closure condensation, forming benzoxazine ( P‐bapf ). In the one‐pot approach, P‐bapf was obtained directly by reacting BAPF, phenol, and paraformaldehyde in various solvents. Among the solvents, we found that using toluene/ethanol (2/1, v/v) as a solvent leads to the best purity and yield. No gelation was observed in the preparation. The structure of the resulting benzoxazine was confirmed by ¹H, ¹³C, ¹H? ¹H and ¹H? ¹³C NMR spectra. P‐bapf exhibits a photoluminescent emission at 395 nm under an excitation of 275 nm. After curing, the resulting P‐bapf thermoset exhibits T_g as high as 236 °C, and the T_g can be further increased to 260 °C by copolymerization with an equal equivalent of cresol novolac epoxy. The 5% degradation temperature of the P‐bapf thermoset reaches as high as 413 °C (N₂) and 431 °C (air). The refractive index at 589 nm is as high as 1.70, demonstrating a high refractive index characteristic of fluorene linkage. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fingerprints of Phalaenopsis Tissues in Growth and Spike Induction Periods—A Solid‐state 13C NMR Approach

Solid‐state Nuclear Magnetic Resonance (ss‐NMR) ¹³C single‐pulse excitation spectroscopy in combination with the magic‐angle spinning (MAS) technique was applied to a series of Phalaenopsis tissues, including the leaf, sheath, stem, and root, at different growth and spiking periods. Compared with{¹H}/¹³C cross‐polarization MAS spectra, the ¹³C single‐pulse excitation MAS spectra displayed very distinct spectral patterns, recognizable as fingerprints of the tissues studied. ¹Here, we demonstrate that solid‐state ¹³C single‐pulse excitation NMR spectroscopy provides a direct and robust analytical tool for studying the various tissues of Phalaenopsis in different growth and spiking induction periods.     

Solid‐state NMR studies of 1,3‐imidazolidine‐2‐selenone and some related compounds

Solid‐state cross‐polarization magic angle spinning ¹³C, ⁷⁷Se and ¹⁵N NMR spectra were recorded for 1,3‐imidazolidine‐2‐selenone, its N‐substituted derivatives and some related compounds. The spinning sideband manifold intensities were used to obtain principal values of ¹³C and ⁷⁷Se chemical shift tensors. Large selenium chemical shift anisotropies were observed for these selenones. Copyright © 2003 John Wiley & Sons, Ltd.     

One‐Step Synthesis of Dialkyl 2‐[(4‐Methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates by Reaction of Acetylenedicarboxylates with ‘Tosylmethyl Isocyanide’ (TsMIC) and Triphenylphosphine

The reactive 1 : 1 adducts in the reaction between Ph₃P and dialkyl acetylenedicarboxylates have been trapped with ‘tosylmethyl isocyanide’ (TsMIC ; 1 ) to yield dialkyl 2‐[(4‐methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates 3 (Scheme 1). The structures of the highly functionalized compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012