Proton Conduction in Metal–Organic Frameworks and Related Modularly Built Porous Solids

Proton‐conducting materials are an important component of fuel cells. Development of new types of proton‐conducting materials is one of the most important issues in fuel‐cell technology. Herein, we present newly developed proton‐conducting materials, modularly built porous solids, including coordination polymers (CPs) or metal–organic frameworks (MOFs). The designable and tunable nature of the porous materials allows for fast development in this research field. Design and synthesis of the new types of proton‐conducting materials and their unique proton‐conduction properties are discussed.     

Water‐Mediated Proton Conduction in a Robust Triazolyl Phosphonate Metal–Organic Framework with Hydrophilic Nanochannels

The development of water‐mediated proton‐conducting materials operating above 100 °C remains challenging because the extended structures of existing materials usually deteriorate at high temperatures. A new triazolyl phosphonate metal–organic framework (MOF) [La₃ L ₄(H₂O)₆]Cl ? x H₂O ( 1 , L ^2?=4‐(4H‐1,2,4‐triazol‐4‐yl)phenyl phosphonate) with highly hydrophilic 1D channels was synthesized hydrothermally. Compound 1 is an example of a phosphonate MOF with large regular pores with 1.9 nm in diameter. It forms a water‐stable, porous structure that can be reversibly hydrated and dehydrated. The proton‐conducting properties of 1 were investigated by impedance spectroscopy. Magic‐angle spinning (MAS) and pulse field gradient (PFG) NMR spectroscopies confirm the dynamic nature of the incorporated water molecules. The diffusivities, determined by PFG NMR and IR microscopy, were found to be close to that of liquid water. This porous framework accomplishes the challenges of water stability and proton conduction even at 110 °C. The conductivity in 1 is proposed to occur by the vehicle mechanism.     

pH‐Dependent Proton Conducting Behavior in a Metal–Organic Framework Material

A porous metal–organic framework (MOF), [Ni₂(dobdc)(H₂O)₂]?6 H₂O (Ni₂(dobdc) or Ni‐MOF‐74; dobdc^4?=2,5‐dioxido‐1,4‐benzenedicarboxylate) with hexagonal channels was synthesized using a microwave‐assisted solvothermal reaction. Soaking Ni₂(dobdc) in sulfuric acid solutions at different pH values afforded new proton‐conducting frameworks, H⁺@Ni₂(dobdc). At pH 1.8, the acidified MOF shows proton conductivity of 2.2×10^?2 S cm^?1 at 80 °C and 95 % relative humidity (RH), approaching the highest values reported for MOFs. Proton conduction occurs via the Grotthuss mechanism with a significantly low activation energy as compared to other proton‐conducting MOFs. Protonated water clusters within the pores of H⁺@Ni₂(dobdc) play an important role in the conduction process.     

Proton Transport in a Highly Conductive Porous Zirconium‐Based Metal–Organic Framework: Molecular Insight

The water stable UiO‐66(Zr)‐(CO₂H)₂ MOF exhibits a superprotonic conductivity of 2.3×10^?3 S cm^?1 at 90 °C and 95 % relative humidity. Quasi‐elastic neutron scattering measurements combined with aMS‐EVB3 molecular dynamics simulations were able to probe individually the dynamics of both confined protons and water molecules and to further reveal that the proton transport is assisted by the formation of a hydrogen‐bonded water network that spans from the tetrahedral to the octahedral cages of this MOF. This is the first joint experimental/modeling study that unambiguously elucidates the proton‐conduction mechanism at the molecular level in a highly conductive MOF.     

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal–organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one‐pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball‐and‐stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.     

Defect‐Controlled Preparation of UiO‐66 Metal–Organic Framework Thin Films with Molecular Sieving Capability

Metal–organic framework (MOF) UiO‐66 thin films are solvothermally grown on conducting substrates. The as‐synthesized MOF thin films are subsequently dried by a supercritical process or treated with polydimethylsiloxane (PDMS). The obtained UiO‐66 thin films show excellent molecular sieving capability as confirmed by the electrochemical studies for redox‐active species with different sizes.     

Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Imparting Multifunctionality by Utilizing Biporosity in a Zirconium‐Based Metal–Organic Framework

In this work, we have synthesized nanocomposites made up of a metal–organic framework (MOF) and conducting polymers by polymerization of specialty monomers such as pyrrole (Py) and 3,4‐ethylenedioxythiophene (EDOT) in the voids of a stable and biporous Zr‐based MOF ( UiO‐66 ). FTIR and Raman data confirmed the presence of polypyrrole ( PPy ) and poly3,4‐ethylenedioxythiophene ( PEDOT ) in UiO‐66‐PPy and UiO‐66‐PEDOT nanocomposites, respectively, and PXRD data revealed successful retention of the structure of the MOF. HRTEM images showed successful incorporation of polymer fibers inside the voids of the framework. Owing to the intrinsic biporosity of UiO‐66 , polymer chains were observed to selectively occupy only one of the voids. This resulted in a remarkable enhancement (million‐fold) of the electrical conductivity while the nanocomposites retain 60–70 % of the porosity of the original MOF. These semiconducting yet significantly porous MOF nanocomposite systems exhibited ultralow thermal conductivity. Enhanced electrical conductivity with lowered thermal conductivity could qualify such MOF nanocomposites for thermoelectric applications.     

Dynamic Calcium Metal–Organic Framework Acts as a Selective Organic Solvent Sponge

Herein, we present a Ca‐based metal–organic framework named AEPF‐1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF‐1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single‐crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest‐free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions.     

Solvent‐Assisted Linker Exchange: An Alternative to the De Novo Synthesis of Unattainable Metal–Organic Frameworks

Metal‐organic frameworks (MOFs) have gained considerable attention as hybrid materials—in part because of a multitude of potential useful applications, ranging from gas separation to catalysis and light harvesting. Unfortunately, de novo synthesis of MOFs with desirable function–property combinations is not always reliable and may suffer from vagaries such as formation of undesirable topologies, low solubility of precursors, and loss of functionality of the sensitive network components. The recently discovered synthetic approach coined solvent‐assisted linker exchange (SALE) constitutes a simple to implement strategy for circumventing these setbacks; its use has already led to the generation of a variety of MOF materials previously unobtainable by direct synthesis methods. This Review provides a perspective of the achievements in MOF research that have been made possible with SALE and examines the studies that have facilitated the understanding and broadened the scope of use of this invaluable synthetic tool.     

Assembly of a Metal–Organic Framework into 3 D Hierarchical Porous Monoliths Using a Pickering High Internal Phase Emulsion Template

3D Hierarchical porous metal–organic framework (MOF) monoliths are prepared by using Pickering high internal phase emulsion (HIPE) template. Pickering HIPEs were stabilized solely by UiO‐66 MOF particles with internal phase up to 90 % of the volume. The effects of internal phase type and volume, as well as MOF particle concentration on the stability of resulting Pickering HIPEs were investigated. Furthermore, by adding small amount of polyvinyl alcohol (PVA) as binder or polymerization in the continuous aqueous phase, followed by freeze‐drying, two types of MOF‐based 3D hierarchical porous monoliths with ultralow density (as low as 12 mg cm^?3) were successfully prepared. This Pickering HIPE template approach provides a facile and practical way for assembling of MOFs into complex structures.     

Selective Sensing of Fe3+ and Al3+ Ions and Detection of 2,4,6‐Trinitrophenol by a Water‐Stable Terbium‐Based Metal–Organic Framework

A water‐stable luminescent terbium‐based metal–organic framework (MOF), {[Tb(L₁)_1.5(H₂O)] ? 3 H₂O}_n (Tb‐MOF), with rod‐shaped secondary building units (SBUs) and honeycomb‐type tubular channels has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. The high green emission intensity and the microporous nature of the Tb‐MOF indicate that it can potentially be used as a luminescent sensor. In this work, we show that Tb‐MOF can selectively sense Fe³⁺ and Al³⁺ ions from mixed metal ions in water through different detection mechanisms. In addition, it also exhibits high sensitivity for 2,4,6‐trinitrophenol (TNP) in the presence of other nitro aromatic compounds in aqueous solution by luminescence quenching experiments.     

2D Semiconducting Metal–Organic Framework Thin Films for Organic Spin Valves

2D conductive metal–organic frameworks (2D c‐MOFs) feature promising applications as chemiresistive sensors, electrode materials, electrocatalysts, and electronic devices. However, exploration of the spin‐polarized transport in this emerging materials and development of the relevant spintronics have not yet been implemented. In this work, layer‐by‐layer assembly was applied to fabricate highly crystalline and oriented thin films of a 2D c‐MOF, Cu₃(HHTP)₂, (HHTP: 2,3,6,7,10,11‐hexahydroxytriphenylene), with tunable thicknesses on the La_0.67Sr_0.33MnO₃ (LSMO) ferromagnetic electrode. The magnetoresistance (MR) of the LSMO/Cu₃(HHTP)₂/Co organic spin valves (OSVs) reaches up to 25 % at 10 K. The MR can be retained with good film thickness adaptability varied from 30 to 100 nm and also at high temperatures (up to 200 K). This work demonstrates the first potential applications of 2D c‐MOFs in spintronics.     

A Versatile AlIII‐Based Metal–Organic Framework with High Physicochemical Stability

A unique Al^III‐based metal–organic framework (467‐MOF) with two types of square channels has been designed and synthesized by using a flexible tricarboxylate ligand under solvothermal conditions. 467‐MOF exhibits superior thermal and chemical stability and, moreover, shows high CO₂ sorption selectivity over H₂, with a selectivity, based on the ideal adsorbed solution theory (IAST) of approximately 45 at 273 or 293 K. Furthermore, its solvent‐dependent photoluminescence makes it an applicable sensor in the detection of nitrobenzene explosives through fluorescence quenching.     

Electrically Conductive Porous Metal–Organic Frameworks

Owing to their outstanding structural, chemical, and functional diversity, metal–organic frameworks (MOFs) have attracted considerable attention over the last two decades in a variety of energy‐related applications. Notably missing among these, until recently, were applications that required good charge transport coexisting with porosity and high surface area. Although most MOFs are electrical insulators, several materials in this class have recently demonstrated excellent electrical conductivity and high charge mobility. Herein we review the synthetic and electronic design strategies that have been employed thus far for producing frameworks with permanent porosity and long‐range charge transport properties. In addition, key experiments that have been employed to demonstrate electrical transport, as well as selected applications for this subclass of MOFs, will be discussed.