Unique thermospray mass spectrometry of 1,4-benzoquinone and analogs in ammonium acetate solutions

In general, ions corresponding to [M + H]⁺ and/or [M + NH₄]⁺ are observed in thermospray mass spectrometry (TSMS) when using ammonium acetate in the liquid carrier. For several quinones investigated, unique thermospray mass spectra were detected with a mass spectral peak corresponding to an [M + 16]⁺ ion being observed in aqueous ammonium acetate solutions. Investigation of l,4-benzoquinone (BQU) and structurally analogous quinones indicated that amine conjugate formation with BQU and similar quinones was the origin of the unique [M + 16]⁺ ion in TSMS. When methanol was added to the liquid carrier, ions corresponding to methoxy conjugation were detected. High-performance liquid chromatography followed by TSMS or electrochemical detection gave evidence that this amine and methoxy conjugate formation was occurring in the thermospray source area.     

Electrochemical O-glycosylation using thioglycosides as glycosyl donors in the presence of a catalytic amount of sodium trifluoromethanesulfonate as a supporting electrolyte

Electrochemical O-glycosylation of primary alcohols with O-protected thioglycosides was performed in the presence of a small amount of sodium trifluoromethansulfonate (12.5 mol % to glycosyl acceptor) as a supporting electrolyte. The reaction was successfully carried out in an undivided cell to give O-glycosides in good yields with a high electro-efficiency (ca. 1 F/mol) at 15 °C in acetonitrile.     

Unusual ring transformations: Reaction of phenyl 7-fluoro-4-chromone-3-sulfonate with methyl 3-oxo-pentanoate in the presence of ammonium acetate

The novel benzoxathiinopyridines 4 and 5 , the hitherto unknown dibenzopyrone 6 and the heterocyclic enaminone 7 have been synthesized by ring transformations of phenyl 7-fluoro-4-chromone-3-sulfonate ( 1 ) with methyl 3-oxopentanoate ( 2 ) in the presence of ammonium acetate ( 3 ). The structures of 4–7 were determinated by spectroscopic methods and the reaction pathways of formation for these compounds are discussed.     

Utility of solution electrochemistry mass spectrometry for investigating the formation and detection of biologically important conjugates of acetaminophen

On-line formation and detection of glutathione and cysteine conjugates of acetaminophen were accomplished by the interfacing of a coulometric electrochemical cell with a thermospray mass spectrometer in a flow-injection experiment using a liquid chromatographic pump. Formation of the conjugates occurred only after acetaminophen was oxidized electrochemically by a two-electron transfer to N-acetyl-p-benzoquinoneimine and reacted in a mixing tee with either glutathione or cysteine. The newly formed conjugate was detected by thermospray mass spectrometry by observing the [M + H]+ ion for the acetaminophen-glutathione conjugate at m/z 457, or the [M + H]+ ion for the acetaminophen cysteine conjugate at m/z 271. Both the glutathione and cysteine conjugates produced a common fragment ion at m/z 184. The on-line reaction of glutathione and electrochemically generated N-acetyl-p-benzoquinoneimine was monitored at varying pH. At pH 8.5 the ion intensity for the acetaminophen-glutathione conjugate was greater than at lower pH, indicating that lower proton concentration enhanced the reaction of glutathione with N-acetyl-p-benzoquinoneimine. This on-line electrochemical-thermospray mass spectrometric method demonstrated that acetaminophen conjugates may be formed and detected in the time frame of 1 s.     

Direct infusion mass spectrometry as a fingerprint of protein-binding media used in works of art

A direct infusion mass spectrometry method for the characterization of proteinaceous glues from binding media used in pictorial works of art prior to conservation or restoration treatment is proposed. Amino acids are released by acid hydrolysis and dissolved in a mixture of acidic water and ethanol. This mixture is directly infused into a mass spectrometer without any derivatization. The mass spectrometer is operated in positive ion electrospray mode (ESI-MS) to yield [M+H](+) ions for the amino acids. Relative amounts of each amino acid are calculated for each protein (beef and porcine gelatines, albumin, casein and egg). The analyzed proteins were satisfactorily distinguished. The method is easy and fast, and shows good sensitivity and resolution. The proposed method has been successfully applied to artistic samples from items of the cultural heritage of Valencia (Spain).     

Interfacial systems for the coupling of gas chromatography with mass spectrometry

This review is an account of the various interfacial systems used in the mass spectrometric analysis of gas chromatographic eluates.     

Structural analysis of diacyl peroxides by electrospray tandem mass spectrometry with ammonium acetate: bond homolysis of peroxide-ammonium and peroxide-proton adducts

Organic peroxides have significant implications in organic chemistry and biological processes. The weak O-O bond makes them extremely difficult to characterize by conventional analytical methods. Diacyl peroxides are one of the major radical sources in polymerization and organic synthesis. It is well known that diacyl peroxides are thermal labile and thus are not amenable to study by gas chromatography/mass spectrometry (GC/MS). Electrospray tandem mass spectrometry (ESI-MS/MS) has been applied to the structural analysis of diacyl peroxides by formation of ammonium adducts. Collision induced dissociation (CID) studies of the ammonium adducts of the peroxide [M + NH(4)](+) give collision energy dependent fragments. For most diacyl peroxides, homolysis of the peroxy bond predominates the fragmentation pathways of the peroxide-ammonium adducts. Deuterated substrates have been employed to provide evidence for typical fragmentation pathways. The CID studies were also used to locate the O-18 in some O-18 specifically labeled diacyl peroxides. For branched alkyl or alkoxy substrates, McLafferty rearrangement and decarboxylation become a major pathway. By comparison with some anhydride analogues, ESI-MS/MS can also be used to study this class of compounds.     

Unexpected formation of aryl dialkyl carbinol as a side product from the reaction of methoxyarylaldehydes with Grignard reagents

In the attempted formation of secondary aryl alkyl carbinols from the reaction of methoxyarylaldehydes with Grignard reagents, aryl dialkyl carbinols were formed as unexpected side products. A mechanism for their formation is proposed.     

Speciation analysis of tellurium by solid-phase extraction in the presence of ammonium pyrrolidine dithiocarbamate and inductively coupled plasma mass spectrometry

Under acidic conditions tellurium(IV) formed a complex with ammonium pyrrolidine dithiocarbamate (APDC). The tellurium(IV) complex was completely retained on a non-polar Isolute silica-based octadecyl (C(18)) sorbent-containing solid-phase extraction (SPE) cartridge, while the uncomplexed Te(VI) passed through the cartridge and remained as a free species in the solution. Only partial Te(IV) was retained on the SPE cartridge for samples without addition of APDC. On the basis of different retention behaviours of the complexed Te(IV) and uncomplexed Te(VI), a simple and highly sensitive method is proposed for the determination of total tellurium and Te(VI) by SPE separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The Te(IV) concentration was calculated as the difference between total tellurium and Te(VI) concentrations. The detection limit (3 sigma) is 3 ng L(-1) tellurium. Factors affecting the separation and detection of tellurium species were investigated. Coexisting ions did not show significant interferences with the Te(IV)-APDC complex retention and the subsequent ICP-MS detection of Te. The method has been successfully applied to the tellurium speciation analysis in waters with spiked recoveries for Te(IV) and Te(VI) of 86.0-108% and 87.1-97.4%, respectively.     

Time-resolved analysis of hydrolytic aluminum species in the formation of the tridecamer using electrospray ionization mass spectrometry

The time-resolved analysis of neutralized aluminum solution was conducted by electrospray ionization mass spectrometry (ESI-MS) for the speciation of aluminum. Using this technique, the behavior of each aluminum species in a 'short-term' (on the order of minutes) reaction time could be observed. Partially neutralized aluminum solutions (R = [OH(-)](add)/[Al(3+)](T) = 0-3) were adopted to elucidate the formation mechanisms of aluminum species, some of which are industrially and geochemically important. The behavior of the species in the solution at R = 1.5 was dependent on aging time for the first 24 h, while solutions at R = 0 and 3 were quickly equilibrated. At R = 1.5, the time lag for the gradual formation of aluminum tridecamer and the sudden decrease of monomer indicates the presence of an intermediate species: the pentamer. In the concentrated aluminum solution ([Al(3+)] = 1 mol/L) at R = 1.3, where the tridecamer was absent, the hexamer was observed instead of the tridecamer. This hexamer was decomposed to the monomer by dilution, and then the formation of the tridecamer was observed. Two reaction pathways exist for the formation of the hexamer and tridecamer, and the pentamer is proved to be a key to the formation of both the tridecamer and the hexamer. The tridecamer and hexamer, which are detected by nuclear magnetic resonance ((27)Al NMR) and potentiometric titration, respectively, were simultaneously observed by ESI-MS. This indicates that ESI-MS complements conventional techniques such as (27) Al NMR and potentiometric titration for the speciation of aluminum, and can offer detailed information on the dynamics of aluminum species.     

Electrodeposition of cadmium from a sulfate electrolyte in the presence of a fixative

Electrodeposition of cadmium from a sulfate electrolyte containing CdSO₄ · 8/3H2O, H₂SO₄, and a fixative was studied.     

Field ionization mass spectrometry as a facile method for the study of the thermal formation of radicals

Electron impact spectra of thermolysis products of organic salts heated in the ion source of a mass spectrometer may give rise to organic ions corresponding to the cation of the salt. Field ionization mass spectrometry has been used as a facile method for detemining whether such an ion is due to ionization of the corresponding radical present in the gas phase, or to an electron impact induced fragmentation of a reaction product of higher mass. By comparison of the electron impact and field ionization spectra of a series of N-methyl pyridinium, tropylium and 1,2-dithiolylium salts it has been found possible to identify the radicals formed thermolytically, when present.     

Comparison of on-line coupling of ion-chromatography with atmospheric pressure ionization mass spectrometry and with inductively coupled plasma mass spectrometry as tools for the ultra-trace analysis of bromate in surface water samples

Ion chromatography in combination with atmospheric pressure ionization mass spectrometry (API-MS) as well as with inductively coupled plasma mass spectrometry (ICP-MS) had been compared for trace analysis of bromate. The results indicate that both techniques yield comparable results, which are in excellent agreement with standard methods for bromate determination. Furthermore, both techniques showed almost equal absolute detection limits (approximately 50 pg bromate injected). Contrary to IC-API-MS, IC-ICP-MS can tolerate a higher salt concentration in the mobile phase. This allows the use of high-capacity columns combined with large sample volumes. This lowered the concentration based detection limits by one order of magnitude for IC-ICP-MS compared to IC-API-MS (0.06 microg/l vs. 0.5 microg/l). On the other hand, IC-API-MS is able to allow a positive identification of bromate even in cases when IC does not fully separate bromate from other bromine-containing species. The performance data of both IC-MS techniques have been established by participation in an international round robin test.     

Vinyl acetate formation by the reaction of ethylene with acetate species on oxygen-covered Pd(111)

The reaction pathway of vinyl acetate synthesis is scrutinized by reacting gas-phase ethylene (at an effective pressure of 1 x 10-4 Torr) with eta2-acetate species (with a coverage of 0.31 +/- 0.02 monolayer) on a Pd(111)-O(2x2) model catalyst surface in ultrahigh vacuum. It is found that the 1414 cm-1 infrared feature due to the symmetric OCO stretching mode of the acetate species decreases in intensity due to reaction with gas-phase ethylene, while temperature-programmed desorption experiments demonstrate that vinyl acetate is formed. The formation of ethylidyne species is detected when almost all of the acetate species have been removed. The experimental removal kinetics are reproduced by a model in which adsorbed acetates react with an ethylene-derived (possibly ethylene or vinyl) species, where ethylene adsorption is blocked by the acetate present on the surface.     

New coupling of planar chromatography with direct analysis in real time mass spectrometry

The coupling of planar chromatography with direct analysis in real time time-of-flight mass spectrometry (DART-TOF-MS) was shown for the first time. Cutting the plate within a track led to substance zones positioned on the plate edge which were directly introduced into the DART gas stream. Mass signals were obtained instantaneously within seconds. Detectability was shown in the very low ng-range per zone on the example of isopropylthioxanthone. The coupling was perfectly suited for identification and qualitative purposes, but it was initially critical for quantification of results. Analytical response (R2 0.8202) and repeatability were strongly dependent from proper manual positioning of the HPTLC plate into the electronic or vibronic excited-state gas stream of the ion source. This drawback was overcome by using stable isotope-labeled standards shown on the example of caffeine. This way, analytical response (R2 0.9892) and repeatability (RSD < +/- 5.4%, n=6) were improved to a high extent. Spatial resolution by an in-house-built plate holder system was shown to be better than 3 mm. The decay of the signal was observed. The efficacy of this new coupling was compared to a plunger-based extraction device for HPTLC/electrospray ionisation-MS. The latter device showed detectability down to the pg-range, e.g. the limit of quantification for isopropylthioxanthone was found to be 100 pg. Repeatability was comparable (RSD +/- 6.7%), however, without the need of internal standard correction. Analytical response was slightly better and showed a determination coefficient R2 of 0.9983. Similar data were obtained for caffeine as well. Spatial resolution was 2 mm or 4 mm depending on the plunger head used. The comparison showed that HPTLC/DART-TOF-MS is a useful coupling method regarding qualitative aspects and it has the potential to cope also with the difficulties of quantification if isotope-labeled standards were used or if a plate holder system is employed as initially shown.