Crystal structures and magnetic properties of CeAu4Si2 and CeAu2Si2

Single crystals of CeAu₄Si₂ and CeAu₂Si₂ have been grown out of ternary fluxes rich in Au, and the former, also by sintering the stoichiometric composition at 750 °C. The single-crystal X-ray refinement result for CeAu₄Si₂ is orthorhombic, Cmmm (No. 65, Z=2), different from a tetragonal result found from an X-ray powder diffraction refinement [H. Nakashima, et al., J. Alloys Compds. 424 (2006) 7]. For CeAu₂Si₂, this is the first report of the stoichiometric crystalline phase, in the known tetragonal I4/mmm structure. The anisotropic field- and temperature-dependent magnetizations, as well as specific heat and resistivity data are compared. Although both compounds have related structural packing, they present unique magnetic features. CeAu₂Si₂ is a typical antiferromagnet with T_N=8.8(1) K and CeAu₄Si₂ features a ferromagnetic component below T_c=3.3(1) K. Both phases have effective moments close in value to that of free Ce³⁺.     

Crystal structures, physical properties and NMR experiments on the ternary rare-earth metal silicide boride compounds RE5Si2B8 (RE=Y, Sm, Gd, Tb, Dy, Ho)

The ternary rare-earth metal silicide borides RE₅Si₂B₈ (RE=Y, Sm, Gd, Tb, Dy Ho) were prepared by arc melting the elemental components and subsequent annealing up to . The crystal structure was determined for each term of the series from single-crystal X-ray data: tetragonal symmetry, space group P4/mbm, Z=2; unit cell parameters a=7.2616(3), and a=7.1830(2), for Sm₅Si₂B₈ and Ho₅Si₂B₈, respectively. The structure is a new type and can be structurally described as an intergrowth of ThB₄-like and U₃Si₂-like slabs of composition REB₄ and RE₃Si₂, respectively, alternating along the c direction. The boron and silicon substructures are wholly independent and well ordered. The magnetic properties are as follows: Y₅Si₂B₈ is a Pauli-type paramagnet above 1.8 K, Gd₅Si₂B₈ undergoes a weak (canted) ferromagnetic-like order at 70 K followed by a colinear antiferromagnetic spin alignment at 44 K. Tb₅Si₂B₈ and Dy₅Si₂B₈ order antiferromagnetically at a Néel temperature of T_N=45 and 28 K, respectively. In the paramagnetic regime, the effective moments are in good accord with the theoretical RE³⁺ free ion moments. The temperature dependence of the electrical resistivities for the Y, Gd, Tb, and Dy containing samples corroborates with the metallic state of the nonmagnetic (Y) and the magnetically ordered compounds. ¹¹B, ²⁹Si and ⁸⁹Y nuclear magnetic resonance (NMR) spectroscopy on nonmagnetic Y₅Si₂B₈ shows different signals, which correspond to the expected number of distinct crystallographic sites in the structure. ¹¹B NMR on Y₅Si₂B₈ indicates that the local magnetic susceptibilities are substantially different from the ones observed in the related compound YB₄.     

On the structural and magnetic properties of the ternary silicides Ce6M1.67Si3 (M=Co, Ni) and Ce5Ni1.85Si3

Contrary to that reported previously, the ternary silicide “Ce₆Ni₂Si₃” does not exist. The melting of this alloy, followed or not by annealing, leads to the existence of the two new ternary compounds, Ce₆Ni_1.67Si₃ and Ce₅Ni_1.85Si₃. The investigation of these ternary silicides based on nickel and Ce₆Co_1.67Si₃ by X-ray diffraction on single crystal reveals an ordered distribution between Ni (or Co) and Si atoms. The nickel or cobalt positions in the chains of face-shared octahedra of cerium are not fully occupied with a strong delocalisation of their electron density. The structural investigations of these compounds confirm that the “Ce₆Ni₂Si₃” and “Ce₅Ni₂Si₃” structural type have to be rewritten as Ce₆Ni_2−xSi₃ and Ce₅Ni_2−xSi₃. Magnetisation and specific heat measurements evidence a magnetic ordering at 3.8(2) K for Ce₆Ni_1.67Si₃ and a heavy fermion behaviour for Ce₆Co_1.67Si₃.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

Crystal structure of BaMg2Si2O7 and Eu luminescence

Crystal structure of BaMg₂Si₂O₇ was determined and refined by a combined powder X-ray and neutron Rietveld method (monoclinic, C2/c, no. 15, Z=8, a=7.24553(8) Å, b=12.71376(14) Å, c=13.74813(15) Å, β=90.2107(8)°, V=1266.44(2) Å³; R_p/R_wp=3.38%/4.77%). The structure contains a single crystallographic type of Ba atom coordinated to eight O atoms with C₁ (1) site symmetry. Under 325-nm excitation Ba_0.98Eu_0.02Mg₂Si₂O₇ exhibits an asymmetric emission band around 402 nm. The asymmetric shape of the emission band is likely associated with a small electron-phonon coupling in BaMg₂Si₂O₇. The integrated intensity of the emission band was observed to remain constant over the temperature range 4.2-300 K.     

Synthesis, structure characterization and optical properties of a new tripotassium cadmium pentaborate, K3CdB5O10

A new ternary borate oxide, K₃CdB₅O₁₀, has been synthesized by solid-state reaction at 580 °C. The compound crystallizes in the monoclinic space group P2₁/n with a=7.6707 (7) Å, b=19.1765 (17) Å, c=7.8784 (6) Å, β=115.6083 (49)°, and Z=4. The crystal structure consists of a two-dimensional infinite [CdB₅O₁₀] layer, which forms by connecting isolated double ring [B₅O₁₀] groups and CdO₄ tetrahedra. K atoms filling in the interlayer and intralayer link the layers together and balance charge. The IR spectrum has been studied and confirmed the presence of both BO₃ and BO₄ groups, and the UV-vis-IR diffuse reflectance spectrum exhibits a band gap of about 3.4 eV. The DSC analysis proves that K₃CdB₅O₁₀ is a congruent melting compound.     

Novel rare-earth borosilicide RE1−xB12Si3.3−δ (RE=Y, Gd-Lu) (0?x?0.5, δ≈0.3): synthesis, crystal growth, structure analysis and properties

New rare-earth boron-rich compounds with the formula of RE_1−xB₁₂Si_3.3−δ (RE=Y, Gd-Lu) (0?x?0.5,δ≈0.3) have been synthesized. They belong to a new type of rhombohedral structure with the space group of R-3m (No. 166) and z=9. The lattice constants were measured from powder XRD data. Crystal structure solved from powder XRD data for Tb_0.68B₁₂Si₃ as a representative has been compared with that of YB_17.6Si_4.6 (or Y_0.68B₁₂Si_3.01), whose structure was solved from single-crystal reflection data. The structure model is confirmed by high-resolution transmission microscope analysis. The vibrational modes of the new crystals were measured by Raman spectroscopy. Temperature dependence of magnetic susceptibility which was measured for RE_1−xB₁₂Si_3.3−δ single crystals by SQUID revealed that they are paramagnetic materials down to 2.0 K.     

Structure and high-temperature thermoelectric properties of SrAl2Si2

Single crystals of SrAl₂Si₂ were synthesized by reaction of the elements in an aluminum flux at 1000 °C. SrAl₂Si₂ is isostructural to CaAl₂Si₂ and crystallizes in the hexagonal space group P-3m1 (90 K, a=4.1834 (2), c=7.4104 (2) Å, Z=1, R1=0.0156, wR2=0.0308). Thermal analysis shows that the compound melts at ∼1020 °C. Low-temperature resistivity on single crystals along the c-axis shows metallic behavior with room temperature resistivity value of ∼7.5 mΩ cm. High-temperature Seebeck, resistivity, and thermal conductivity measurements were made on hot-pressed pellets. The Seebeck coefficient shows negative values in entire temperature range decreasing from ∼−78 μV K⁻¹ at room temperature to −34 μV K⁻¹ at 1173 K. Seebeck coefficients are negative indicating n-type behavior; however, the temperature dependence is consistent with contribution from minority p-type carriers as well. The lattice contribution to the thermal conductivity is higher than for clathrate structures containing Al and Si, approximately 50 mW cm⁻¹ K, and contributes to the overall low zT for this compound.     

Synthesis and structural characterization of Al4Si2C5-homeotypic aluminum silicon oxycarbide, (Al6−xSix)(OyC5−y) (x∼0.8 and y∼1.6)

We have prepared a new layered oxycarbide, [Al_5.25(5)Si_0.75(5)][O_1.60(7)C_3.40(7)], by isothermal heating of (Al_4.4Si_0.6)(O_1.0C_3.0) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3?m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm³. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R_wp=4.45% (S=1.30), R_p=3.48%, R_B=2.27% and R_F=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3¯m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

Structure and magnetic order in the series BixRE1−xFe0.5Mn0.5O3 (RE=La,Nd)

The influence of Bi³⁺ on the structural and magnetic properties of the rare-earth-containing perovskites REFe_0.5Mn_0.5O₃ (RE=La,Nd) was studied, and the limit of bismuth substitution was determined to be x≤0.5 in Bi_xRE_1−xFe_0.5Mn_0.5O_3+δ (RE=La,Nd) at ambient pressure. Crystal structures in both La and Nd series were determined to be GdFeO₃-type Pnma with the exception of the Bi_0.3La_0.7Fe_0.5Mn_0.5O₃ sample, which is monoclinic I2/a in the a⁻b⁻b⁻ tilt scheme. The samples undergo a transition to G-type antiferromagnetic order along with a weak ferromagnetic component, mixed with cluster-glass type behavior. The substitution of bismuth into the lattice results in a drop in T_N relative to the lanthanide end-members. Long range ordering temperatures T_N in the range 240-255 K were observed, with a significantly lower ordered magnetic moment in the case of lanthanum (M∼1.7-1.9 μ_B) than in the case of neodymium (M∼2.1 μ_B).     

On phase equilibria and crystal structures in the systems Ce-Pd-B and Yb-Pd-B. Physical properties of R2Pd13.6B5 (R=Yb, Lu)

Phase equilibria and crystal structures of ternary compounds were determined in the systems Ce-Pd-B and Yb-Pd-B at 850 °C in the concentration ranges up to 45 and 33 at% of Ce and Yb, respectively, employing X-ray single crystal and powder diffraction. Phase relations in the Ce-Pd-B system at 850 °C are governed by formation of extended homogeneity fields, τ₂-CePd₈B_2−x (0.10<x<0.48); τ₃-Ce₃Pd_25−xB_8−y (1.06<x<1.87; 2.20<y<0.05), and CePd₃B_x (0<x<0.65) the latter arising from binary CePd₃. Crystallographic parameters for the new structure type τ₂-CePd₈B_2−x (space group C2/c, a=1.78104(4) nm, b=1.03723(3) nm, c=1.16314(3), β=118.515(1)° for x=0.46) were established from X-ray single crystal diffraction. The crystal structures of τ₂-CePd₈B_2−x and τ₃-Ce₃Pd_25−xB_3−y are connected in a crystallographic group-subgroup relationship. Due to the lack of suitable single crystals, the novel structure of τ₁-Ce₆Pd_47−xB₆ (x=0.2, C2/m space group, a=1.03594(2) nm, b=1.80782(3) nm, c=1.01997(2) nm, β=108.321(1)°) was determined from Rietveld refinement of X-ray powder diffraction data applying the structural model obtained from single crystals of homologous La₆Pd_47−xB₆ (x=0.19) (X-ray single crystal diffraction, new structure type, space group C2/m, a=1.03988(2) nm, b=1.81941(5) nm, c=1.02418(2) nm, β=108.168(1)°).The Yb-Pd-B system is characterized by one ternary compound, τ₁-Yb₂Pd₁₄B₅, forming equilibria with extended solution YbPd₃B_x, YbB₆, Pd₅B₂ and Pd₃B. The crystal structures of both Yb₂Pd₁₄B₅ and isotypic Lu₂Pd₁₄B₅ were determined from X-ray Rietveld refinements and found to be closely related to the Y₂Pd₁₄B₅-type (I4₁/amd). The crystal structure of binary Yb₅Pd_2−x (Mn₅C₂-type) was confirmed from X-ray single crystal data and a slight defect on the Pd site (x=0.06) was established.The three structures τ₁-Ce₆Pd_47−xB₆, τ₂-CePd₈B_2−x and τ₃-Ce₃Pd_25−xB_8−y are related and can be considered as the packings of fragments observed in Nd₂Fe₁₄B structure with different stacking of common structural blocks.Physical properties for Yb₂Pd_13.6B₅ (temperature dependent specific heat, electrical resistivity and magnetization) yielded a predominantly Yb-4f¹³ electronic configuration, presumably related with a magnetic instability below 2 K. Kondo interaction and crystalline electric field effects control the paramagnetic temperature domain.     

Structure and magnetic properties of RE2Cu2Cd

The ternary intermetallic compounds RE₂Cu₂Cd (RE=Y, Sm, Gd-Tm, Lu) were synthesized by induction-melting of the elements in sealed tantalum tubes. The samples were characterized by X-ray powder diffraction. The structure of Gd₂Cu₂Cd was refined from single crystal X-ray diffractometer data: Mo₂FeB₂ type, space group P4/mbm, a=756.2(3), c=380.2(3) pm, wR2=0.0455, 321 F² values, 12 variables. The structures are 1:1 intergrowth variants of slightly distorted CsCl and AlB₂ related slabs of compositions RECd and RECu₂. The copper and cadmium atoms build up two-dimensional [Cu₂Cd] networks (257 pm Cu-Cu and 301 pm Cu-Cd in Gd₂Cu₂Cd) which are bonded to the rare earth atoms via short RE-Cu contacts (290 pm in Gd₂Cu₂Cd). Temperature dependent susceptibility measurements of RE₂Cu₂Cd with RE=Gd, Tb, Dy, and Tm show experimental magnetic moments which are close to the free RE³⁺ ion values. The four compounds show ferromagnetic ordering at T_C=116.7(2), 86.2(3), 48.4(1), and 14.5(1) K, respectively, as confirmed by heat capacity measurements. Dy₂Cu₂Cd shows a spin reorientation at T_N=16.9(1) K.     

Syntheses and Crystal Structure of the Ternary Silicides RE2Si2Mg (RE = Y, La–Nd, Sm, Gd–Lu) and Structure Refinement of Dy5Si3

The rare earth metal–magnesium–silicides RE₂Si₂Mg (RE = Y, La–Nd, Sm, Gd–Lu) were prepared by induction melting of the elements in sealed tantalum tubes in a water-cooled sample chamber of a high-frequency furnace. The silicides were investigated via X-ray powder diffraction. The structures of Sm₂Si₂Mg and Dy₂Si₂Mg were refined from X-ray single crystal diffractometer data: Mo₂FeB₂ type, P4/mbm, a = 727.86(7), c = 428.16(6) pm, wR2 = 0.0194, 206 F² values, 13 variable parameters for Sm₂Si₂Mg and a = 713.85(7), c = 419.07(6) pm, wR2 = 0.0331, 286 F² values, 12 variable parameters for Dy₂Si₂Mg. The samarium compound shows a small homogeneity range Sm_2+xSi₂Mg_1−x. The investigated single crystal had the refined composition Sm_2.022(3)Si₂Mg_0.978(3). The RE₂Si₂Mg silicides are 1:1 intergrowth structures of CsCl and AlB₂ related slabs of compositions REMg and RESi₂. Crystals of the binary silicide Dy₅Si₃ were obtained as side product. The structure was refined from X-ray single crystal data: Mn₅Si₃ type, P6₃/mcm, a = 841.0(2), c = 631.3(1) pm, wR2 = 0.0661, 269 F² values, 12 variable parameters.     

Syntheses and Crystal Structure of the Ternary Silicides RE2Si2Mg (RE = Y, La–Nd, Sm, Gd–Lu) and Structure Refinement of Dy5Si3

Summary. The rare earth metal–magnesium–silicides RE₂Si₂Mg (RE = Y, La–Nd, Sm, Gd–Lu) were prepared by induction melting of the elements in sealed tantalum tubes in a water-cooled sample chamber of a high-frequency furnace. The silicides were investigated via X-ray powder diffraction. The structures of Sm₂Si₂Mg and Dy₂Si₂Mg were refined from X-ray single crystal diffractometer data: Mo₂FeB₂ type, P4/mbm, a = 727.86(7), c = 428.16(6) pm, wR2 = 0.0194, 206 F² values, 13 variable parameters for Sm₂Si₂Mg and a = 713.85(7), c = 419.07(6) pm, wR2 = 0.0331, 286 F² values, 12 variable parameters for Dy₂Si₂Mg. The samarium compound shows a small homogeneity range Sm_2+xSi₂Mg_1−x. The investigated single crystal had the refined composition Sm_2.022(3)Si₂Mg_0.978(3). The RE₂Si₂Mg silicides are 1:1 intergrowth structures of CsCl and AlB₂ related slabs of compositions REMg and RESi₂. Crystals of the binary silicide Dy₅Si₃ were obtained as side product. The structure was refined from X-ray single crystal data: Mn₅Si₃ type, P6₃/mcm, a = 841.0(2), c = 631.3(1) pm, wR2 = 0.0661, 269 F² values, 12 variable parameters.     

Multianvil high-pressure/high-temperature preparation, crystal structure, and properties of the new oxoborates Dy4B6O14(OH)2 and Ho4B6O14(OH)2

This paper reports about two new hydrogen-containing rare-earth oxoborates RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho) synthesized under high-pressure/high-temperature conditions from the corresponding rare-earth oxides, boron oxide, and water using a Walker-type multianvil equipment at 8 GPa and 880 °C. The single crystal structure determination of Dy₄B₆O₁₄(OH)₂ showed: Pbcn, a=1292.7(2), b=437.1(2), , Z=2, R1=0.0190, and wR2=0.0349 (all data). The isotypic holmium species revealed: Pbcn, a=1292.8(2), b=436.2(2), , Z=2, R1=0.0206, and wR2=0.0406 (all data). The compounds exhibit a new type of structure, which is built up from layers of condensed BO₄-tetrahedra. Between the layers, the rare-earth cations are coordinated by 7+2 oxygen atoms. Furthermore, we report about temperature-resolved in situ powder diffraction measurements, DTA/TG, and IR-spectroscopic investigations into RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho).     

Crystal-chemistry of mullite-type aluminoborates Al18B4O33 and Al5BO9: A stoichiometry puzzle

Orthorhombic Al₂O₃-rich aluminoborate is an important ceramic material for which two slightly different compositions have been assumed: Al₅BO₉ (5Al₂O₃:B₂O₃) and Al₁₈B₄O₃₃ (9Al₂O₃:2B₂O₃). The formula Al₁₈B₄O₃₃ (=Al_4.91B_1.09O₉) was derived from results of chemical analyses when crystal structure data were not yet available. Subsequent structural investigations indicated Al₅BO₉ composition. Nevertheless, Al₁₈B₄O₃₃ was still accepted as the correct stoichiometry assuming that additional B replaces 9% Al.Powder samples of both compositions and ones with excess boron were prepared by solid state reactions between α-Al₂O₃ and B₂O₃/H₃BO₃ at temperatures above 1100 °C and single-crystals were grown from flux at 1100 and 1550 °C. Products were investigated by single-crystal and powder XRD, ¹¹B and ²⁷Al solid-state MAS-NMR, Raman and FTIR spectroscopy as well as Laser-ablation ICP-MS. No indication of the predicted 9% B→Al substitution was found. LA ICP-MS indicated 12.36(27) wt% B₂O₃ corresponding to Al_4.97B_1.03O₉. Hence, the suggested Al₁₈B₄O₃₃ stoichiometry can be excluded for all synthesized samples. A very low amount of Al vacancies at a five-fold coordinated site are likely, charge balanced by an additional nearby three-fold coordinated B site. All evidences indicate that the title compound should be reported as Al_5−xB_1+xO₉ with x<0.038(6), which is close to Al₅BO₉.     

Phase formation, crystal chemistry, and properties in the system Bi2O3-Fe2O3-Nb2O5

Subsolidus phase relations have been determined for the Bi₂O₃-Fe₂O₃-Nb₂O₅ system in air (900-1075 °C). Three new ternary phases were observed—Bi₃Fe_0.5Nb_1.5O₉ with an Aurivillius-type structure, and two phases with approximate stoichiometries Bi₁₇Fe₂Nb₃₁O₁₀₆ and Bi₁₇Fe₃Nb₃₀O₁₀₅ that appear to be structurally related to Bi₈Nb₁₈O₅₇. The fourth ternary phase found in this system is pyrochlore (A₂B₂O₆O′), which forms an extensive solid solution region at Bi-deficient stoichiometries (relative to Bi₂FeNbO₇) suggesting that ≈4-15% of the A-sites are occupied by Fe³⁺. X-ray powder diffraction data confirmed that all Bi-Fe-Nb-O pyrochlores form with positional displacements, as found for analogous pyrochlores with Zn, Mn, or Co instead of Fe. A structural refinement of the pyrochlore 0.4400:0.2700:0.2900 Bi₂O₃:Fe₂O₃:Nb₂O₅ using neutron powder diffraction data is reported with the A cations displaced (0.43 Å) to 96g sites and O′ displaced (0.29 Å) to 32e sites (Bi_1.721Fe_0.190(Fe_0.866Nb_1.134)O₇, Fd3¯m (#227), ). This displacive model is somewhat different from that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which exhibits twice the concentration of small B-type cations on the A-sites as the Fe system. Bi-Fe-Nb-O pyrochlores exhibited overall paramagnetic behavior with large negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. The single-phase pyrochlore with composition Bi_1.657Fe_1.092Nb_1.150O₇ exhibited low-temperature dielectric relaxation similar to that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92; at 1 MHz and 200 K the relative permittivity was 125, and above 350 K conductive effects were observed.     

The study of Bi3B5O12: synthesis, crystal structure and thermal expansion of oxoborate Bi3B5O12

The paper presents a new data on the crystal structure, thermal expansion and IR spectra of Bi₃B₅O₁₂. The Bi₃B₅O₁₂ single crystals were grown from the melt of the same stoichiometry by Czochralski technique. The crystal structure of Bi₃B₅O₁₂ was refined in anisotropic approximation using single-crystal X-ray diffraction data. It is orthorhombic, Pnma, a=6.530(4), b=7.726(5), c=18.578(5) Å, V=937.2(5) Å³, Z=4, R=3.45%. Bi³⁺ atoms have irregular coordination polyhedra, Bi(1)O₆ (d(B-O)=2.09-2.75 Å) and Bi(2)O₇ (d(B-O)=2.108-2.804 Å). Taking into account the shortest bonds only, these polyhedra are considered here as trigonal Bi(1)O₃ (2.09-2.20 Å) and tetragonal Bi(2)O₄ (2.108-2.331 Å) irregular pyramids with Bi atoms in the tops of both pyramids. The BiO₄ polyhedra form zigzag chains along b-axis. These chains alternate with isolated anions [B₂^IVB₃^IIIO₁₁]⁷⁻ through the common oxygen atoms to form thick layers extended in ab plane. A perfect cleavage of the compound corresponds to these layers and an imperfect one is parallel to the Bi-O chains. The Bi₃B₅O₁₂ thermal expansion is sharply anisotropic (α₁₁≈α₂₂=12, α₃₃=3×10⁻⁶ °C⁻¹) likely due to a straightening of the flexible zigzag chains along b-axis and decreasing of their zigzag along c-axis. Thus the properties like cleavage and thermal expansion correlate to these chains.     

Crystal structure and physical properties of the novel ternary intermetallics URuSi3−x and U3Ru2Si7

Two novel ternary intermediate phases, namely URuSi_3−x (x=0.11) and U₃Ru₂Si₇ were found in the Si-rich part of the U-Ru-Si phase diagram. Single crystal X-ray diffraction measurements, carried out at room temperature, indicated that URuSi_3−x crystallizes in its own tetragonal type structure (space group P4/nmm, no. 129; unit cell parameters: a=12.108(1) Å and c=9.810(1) Å), being a derivative of the BaNiSn₃-type structure. U₃Ru₂Si₇ adopts in turn a disordered orthorhombic La₃Co₂Sn₇-type structure (space group Cmmm, no. 65; unit cell parameters: a=4.063(1) Å, b=24.972(2) Å and c=4.072(1) Å). As revealed by magnetization, electrical resistivity and specific heat measurements, both compounds order magnetically at low temperatures. Namely URuSi_3−x is a ferromagnet with T_C=45 K, and U₃Ru₂Si₇ shows ferrimagnetic behavior below T_C=29 K.