共查询到20条相似文献,搜索用时 375 毫秒
1.
In this paper, the Ritz minimum energy method, based on the use of the Principle of Virtual Displacements (PVD), is combined with refined Equivalent Single Layer (ESL) and Zig Zag (ZZ) shell models hierarchically generated by exploiting the use of Carrera's Unified Formulation (CUF), in order to engender the Hierarchical Trigonometric Ritz Formulation (HTRF). The HTRF is then employed to carry out the free vibration analysis of doubly curved shallow and deep functionally graded material (FGM) shells. The PVD is further used in conjunction with the Gauss theorem to derive the governing differential equations and related natural boundary conditions. Donnell–Mushtari's shallow shell-type equations are given as a particular case. Doubly curved FGM shells and doubly curved sandwich shells made up of isotropic face sheets and FGM core are investigated. The proposed shell models are widely assessed by comparison with the literature results. Two benchmarks are provided and the effects of significant parameters such as stacking sequence, boundary conditions, length-to-thickness ratio, radius-to-length ratio and volume fraction index on the circular frequency parameters and modal displacements are discussed. 相似文献
2.
In the present work, the study of the nonlinear vibration of a functionally graded cylindrical shell subjected to axial and transverse mechanical loads is presented. Material properties are graded in the thickness direction of the shell according to a simple power law distribution in terms of volume fractions of the material constituents. Governing equations are derived using improved Donnell shell theory ignoring the shallowness of cylindrical shells and kinematic nonlinearity is taken into consideration. One-term approximate solution is assumed to satisfy simply supported boundary conditions. The Galerkin method, the Volmir's assumption and fourth-order Runge–Kutta method are used for dynamical analysis of shells to give explicit expressions of natural frequencies, nonlinear frequency–amplitude relation and nonlinear dynamic responses. Numerical results show the effects of characteristics of functionally graded materials, pre-loaded axial compression and dimensional ratios on the dynamical behavior of shells. The proposed results are validated by comparing with those in the literature. 相似文献
3.
Mohammad Ebrahim Torki Mohammad Taghi Kazemi Junuthula N. Reddy Hassan Haddadpoud Saeid Mahmoudkhani 《Journal of sound and vibration》2014
In this paper, flutter of functionally graded material (FGM) cylindrical shells under distributed axial follower forces is addressed. The first-order shear deformation theory is used to model the shell, and the material properties are assumed to be graded in the thickness direction according to a power law distribution using the properties of two base material phases. The solution is obtained by using the extended Galerkin's method, which accounts for the natural boundary conditions that are not satisfied by the assumed displacement functions. The effect of changing the concentrated (Beck's) follower force into the uniform (Leipholz's) and linear (Hauger's) distributed follower loads on the critical circumferential mode number and the minimum flutter load is investigated. As expected, the flutter load increases as the follower force changes from the so-called Beck's load into the so-called Leipholz's and Hauger's loadings. The increased flutter load was calculated for homogeneous shell with different mechanical properties, and it was found that the difference in elasticity moduli bears the most significant effect on the flutter load increase in short, thick shells. Also, for an FGM shell, the increase in the flutter load was calculated directly, and it was found that it can be derived from the simple power law when the corresponding increase for the two base phases are known. 相似文献
4.
A numerical method is proposed for analyzing transient waves in cylindrical shells of a functionally graded material (FGM) excited by impact point loads. In the present method, the FGM shell is divided into layer elements with three nodal lines along the wall thickness. The material property within each element is assumed to vary linearly in the thickness direction, which represents the spatial variation of material property of FGM. This can further reduce the number of elements to obtain more accurate results effectively. The Hamilton principle is used to develop approximate dynamic equilibrium equations. The displacement response is determined by employing the Fourier transformation and the modal analysis. As examples, the displacement responses of FGM shells excited by point loads are calculated, and the characteristics of waves in FGM shells are discussed. The computations have shown the efficiency of the present method. 相似文献
5.
《Journal of sound and vibration》2007,299(1-2):36-43
Here, the dynamic thermal buckling behavior of functionally graded spherical caps is studied considering geometric nonlinearity based on von Karman's assumptions. The formulation is based on first-order shear deformation theory and it includes the in-plane and rotary inertia effects. The material properties are graded in the thickness direction according to the power-law distribution in terms of volume fractions of the material constituents. The effective material properties are evaluated using homogenization method. The governing equations obtained using finite element approach are solved employing the Newmark's integration technique coupled with a modified Newton–Raphson iteration scheme. The pressure load corresponding to a sudden jump in the maximum average displacement in the time history of the shell structure is taken as the dynamic buckling load. The present model is validated against the available isotropic case. A detailed numerical study is carried out to highlight the influences of shell geometries, power law index of functional graded material and boundary conditions on the dynamic buckling load of shallow spherical shells. 相似文献
6.
A comprehensive dynamic model of a rotating hub–functionally graded material (FGM) beam system is developed based on a rigid–flexible coupled dynamics theory to study its free vibration characteristics. The rigid–flexible coupled dynamic equations of the system are derived using the method of assumed modes and Lagrange's equations of the second kind. The dynamic stiffening effect of the rotating hub–FGM beam system is captured by a second-order coupling term that represents longitudinal shrinking of the beam caused by the transverse displacement. The natural frequencies and mode shapes of the system with the chordwise bending and stretching (B–S) coupling effect are calculated and compared with those with the coupling effect neglected. When the B–S coupling effect is included, interesting frequency veering and mode shift phenomena are observed. A two-mode model is introduced to accurately predict the most obvious frequency veering behavior between two adjacent modes associated with a chordwise bending and a stretching mode. The critical veering angular velocities of the FGM beam that are analytically determined from the two-mode model are in excellent agreement with those from the comprehensive dynamic model. The effects of material inhomogeneity and graded properties of FGM beams on their dynamic characteristics are investigated. The comprehensive dynamic model developed here can be used in graded material design of FGM beams for achieving specified dynamic characteristics. 相似文献
7.
Buckling of 2D-FG Cylindrical Shells under Combined External Pressure and Axial Compression
下载免费PDF全文
![点击此处可从《advances in applied mathematics and mechanics.》网站下载免费的PDF全文](/ch/ext_images/free.gif)
R. Mohammadzadeh M. M. Najafizadeh & M. Nejati 《advances in applied mathematics and mechanics.》2013,5(3):391-406
This paper presents the stability of two-dimensional functionally graded (2D-FG)
cylindrical shells subjected to combined external pressure and axial compression loads,
based on classical shell theory. The material properties of functionally graded cylindrical
shell are graded in two directional (radial and axial) and determined by the rule of mixture.
The Euler's equation is employed to derive the stability equations, which are solved by GDQ
method to obtain the critical mechanical buckling loads of the 2D-FG cylindrical shells. The
effects of shell geometry, the mechanical properties distribution in radial and axial direction
on the critical buckling load are studied and compared with a cylindrical shell made of 1D-FGM.
The numerical results reveal that the 2D-FGM has a significant effect on the critical buckling load. 相似文献
8.
Huijie Shen Jihong Wen Michael P. Païdoussis Dianlong Yu Meisam Asgari Xisen Wen 《Physics letters. A》2012
A periodic shell made of functionally graded material (FGM) is proposed in this Letter. Wave propagation and vibration transmission in the FGM periodic shell for different circumferential modes are investigated. By illustrating the dynamical behavior of the periodic FGM shell within the pass/stop band frequency ranges, the mechanism of wave propagation and vibration transmission in the shell are illuminated. Moreover, the suppression characteristics of structure-borne sound in the internal field of the shell, either within the stop or pass band frequency ranges, are studied. 相似文献
9.
Free vibration of functionally graded beams with a through-width delamination is investigated.It is assumed that the material property is varied in the thickness direction as power law functions and a single through-width delamination is located parallel to the beam axis.The beam is subdivided into three regions and four elements.Governing equations of the beam segments are derived based on the Timoshenko beam theory and the assumption of‘constrained mode’.By using the differential quadrature element method to solve the eigenvalue problem of ordinary differential equations governing the free vibration,numerical results for the natural frequencies of the beam are obtained.Natural frequencies of delaminated FGM beam with clamped ends are presented.Effects of parameters of the material gradients,the size and location of delamination on the natural frequency are examined in detail. 相似文献
10.
为了获得任意角度铺层的多层复合材料圆柱壳的自由振动准确解,在三维弹性理论的基础上,结合分层理论和状态空间法,建立横向位移和应力的传递矩阵,轴向和环向位移采用双螺旋模式的位移函数,对任意角度铺层复合材料圆柱壳简支边界条件下的自由振动进行了理论推导,得到了自由振动方程的精确形式。与文献理论解和有限元计算结果对比,结果表明,关注频率在2倍的环频率以下时,薄壳的固有频率计算精度能控制在1%以内,厚壳的固有频率计算精度能控制在2%以内。对于厚壳的计算可将壳体沿厚度方向划分为多层来处理,这样能有效提高计算精度。计算分析了铺层角对壳体固有频率的影响,环向模态数较低时,固有频率随着铺层角的增加呈抛物线变化趋势;环向模态数较高时,固有频率随着铺层角的增大单调递增。该理论方法同样适用于均质各向同性壳和正交各向异性圆柱壳。 相似文献
11.
Free vibration and parametric resonance of shear deformable functionally graded cylindrical panels 总被引:1,自引:0,他引:1
This paper investigates free vibration and dynamic instability of functionally graded cylindrical panels subjected to combined static and periodic axial forces and in thermal environment. Theoretical formulations are based on Reddy's higher order shear deformation shell theory to account for rotary inertia and the parabolic distribution of the transverse shear strains through the panel thickness. Thermal effects due to steady temperature change are included in the analysis. Material properties are assumed to be temperature dependent and graded in the thickness direction according to a power-law distribution in terms of the volume fractions of the constituents. The panel under current consideration is clamped or simply supported on two straight edges and may be either free, simply supported or clamped on the curved edges. A semi-analytical approach, which takes the advantages of one-dimensional differential quadrature approximation, Galerkin technique and Bolotin's method, is employed to determine the natural frequencies and the unstable regions of the panel. Numerical results for silicon nitride/stainless-steel cylindrical panels are given in both dimensionless tabular and graphical forms. Effects of material composition, temperature rise, panel geometry parameters, and boundary conditions on free vibration and the parametric resonance are also studied. 相似文献
12.
The main aim of this paper is to provide a simple yet efficient solution for the free vibration analysis of functionally graded (FG) conical shells and annular plates. A solution approach based on Haar wavelet is introduced and the first-order shear deformation shell theory is adopted to formulate the theoretical model. The material properties of the shells are assumed to vary continuously in the thickness direction according to general four-parameter power-law distributions in terms of volume fractions of the constituents. The separation of variables is first performed; then Haar wavelet discretization is applied with respect to the axial direction and Fourier series is assumed with respect to the circumferential direction. The constants appearing from the integrating process are determined by boundary conditions, and thus the partial differential equations are transformed into algebraic equations. Then natural frequencies of the FG shells are obtained by solving algebraic equations. Accuracy and reliability of the current method are validated by comparing the present results with the existing solutions. Effects of some geometrical and material parameters on the natural frequencies of shells are discussed and some selected mode shapes are given for illustrative purposes. It’s found that accurate frequencies can be obtained by using a small number of collocation points and boundary conditions can be easily achieved. The advantages of this current solution method consist in its simplicity, fast convergence and excellent accuracy. 相似文献
13.
In this paper, free vibration response of stepped beams made from functionally graded materials (FGMs) is investigated. The beams are supported by various types of elastically end constraints. The differential transformation method (DTM) is employed to solve the governing differential equations of such beams in order to obtain natural frequencies and mode shapes. The power law distribution is used and modified to describe material compositions across the thickness of the beams made of FGMs. Two main types of the stepped FGM beams in which their material compositions can be described by using the modified power law distribution are selected to investigate their vibration behaviour. The significant parametric studies such as step ratio, step location, boundary conditions, spring constants and material volume fraction are taken into investigation. 相似文献
14.
In this paper, an analytical solution is provided for the nonlinear free vibration behavior of plates made of functionally graded materials. The material properties of the functionally graded plates are assumed to vary continuously through the thickness, according to a power-law distribution of the volume fraction of the constituents. The fundamental equations for thin rectangular plates of functionally graded materials are obtained using the von Karman theory for large transverse deflection, and the solution is obtained in terms of mixed Fourier series. The effect of material properties, boundary conditions and thermal loading on the dynamic behavior of the plates is determined and discussed. The results reveal that nonlinear coupling effects play a major role in dictating the fundamental frequency of functionally graded plates. 相似文献
15.
In this paper, the vibration and stability of orthotropic conical shells with non-homogeneous material properties under a hydrostatic pressure are studied. At first, the basic relations have been obtained for orthotropic truncated conical shells, Young's moduli and density of which vary continuously in the thickness direction. By applying the Galerkin method to the foregoing equations, the buckling pressure and frequency parameter of truncated conical shells are obtained from these equations. Finally, carrying out some computations, the effects of the variations of conical shell characteristics, the effects of the non-homogeneity and the orthotropy on the critical dimensionless hydrostatic pressure and lowest dimensionless frequency parameter have been studied, when Young's moduli and density vary together and separately. The results are presented in tables, figures and compared with other works. 相似文献
16.
This paper focuses on the dynamic behavior of functionally graded conical, cylindrical shells and annular plates. The last two structures are obtained as special cases of the conical shell formulation. The first-order shear deformation theory (FSDT) is used to analyze the above moderately thick structural elements. The treatment is developed within the theory of linear elasticity, when materials are assumed to be isotropic and inhomogeneous through the thickness direction. The two-constituent functionally graded shell consists of ceramic and metal that are graded through the thickness, from one surface of the shell to the other. Two different power-law distributions are considered for the ceramic volume fraction. The homogeneous isotropic material is inferred as a special case of functionally graded materials (FGM). The governing equations of motion, expressed as functions of five kinematic parameters, are discretized by means of the generalized differential quadrature (GDQ) method. The discretization of the system leads to a standard linear eigenvalue problem, where two independent variables are involved without using the Fourier modal expansion methodology. For the homogeneous isotropic special case, numerical solutions are compared with the ones obtained using commercial programs such as Abaqus, Ansys, Nastran, Straus, Pro/Mechanica. Very good agreement is observed. Furthermore, the convergence rate of natural frequencies is shown to be very fast and the stability of the numerical methodology is very good. Different typologies of non-uniform grid point distributions are considered. Finally, for the functionally graded material case numerical results illustrate the influence of the power-law exponent and of the power-law distribution choice on the mechanical behavior of shell structures. 相似文献
17.
Three-dimensional free vibration of thick functionally graded annular plates in thermal environment 总被引:1,自引:0,他引:1
The free vibration analysis of functionally graded (FG) thick annular plates subjected to thermal environment is studied based on the 3D elasticity theory. The material properties are assumed to be temperature dependent and graded in the thickness direction. Considering the thermal environment effects and using Hamilton's principle, the equations of motion are derived. The effects of the initial thermal stresses are considered accurately by obtaining them from the 3D thermoelastic equilibrium equations. The differential quadrature method (DQM) as an efficient and accurate numerical tool is used to solve both the thermoelastic equilibrium and free vibration equations. Very fast rate of convergence of the method is demonstrated. Also, the formulation is validated by comparing the results with those obtained based on the first-order shear deformation theory and also with those available in the literature for the limit cases, i.e. annular plates without thermal effects. The effects of temperature rise, material and geometrical parameters on the natural frequencies are investigated. The new results can be used as benchmark solutions for future researches. 相似文献
18.
The free vibration analysis of functionally graded annular plates with mixed boundary conditions in thermal environment is carried out by the 3D elasticity theory and the Chebyshev–Ritz method. The material properties are assumed to be temperature dependent and graded in the thickness direction. The mixed boundary conditions which include upper and lower surfaces partially fixed, inner side partially fixed and outer side partially fixed are considered, respectively. The accuracy of the present approach for solving the free vibration of the plates with different boundary conditions is validated by comparing the present numerical results with the results available. The effects of the different mixed boundary conditions, the temperature rise, the material graded index and the geometrical parameters on the eigen-frequencies are studied. 相似文献
19.
An analytical method for free vibration analysis of functionally graded beams with edge cracks 总被引:1,自引:0,他引:1
In this paper, an analytical method is proposed for solving the free vibration of cracked functionally graded material (FGM) beams with axial loading, rotary inertia and shear deformation. The governing differential equations of motion for an FGM beam are established and the corresponding solutions are found first. The discontinuity of rotation caused by the cracks is simulated by means of the rotational spring model. Based on the transfer matrix method, then the recurrence formula is developed to get the eigenvalue equations of free vibration of FGM beams. The main advantage of the proposed method is that the eigenvalue equation for vibrating beams with an arbitrary number of cracks can be conveniently determined from a third-order determinant. Due to the decrease in the determinant order as compared with previous methods, the developed method is simpler and more convenient to analytically solve the free vibration problem of cracked FGM beams. Moreover, free vibration analyses of the Euler–Bernoulli and Timoshenko beams with any number of cracks can be conducted using the unified procedure based on the developed method. These advantages of the proposed procedure would be more remarkable as the increase of the number of cracks. A comprehensive analysis is conducted to investigate the influences of the location and total number of cracks, material properties, axial load, inertia and end supports on the natural frequencies and vibration mode shapes of FGM beams. The present work may be useful for the design and control of damaged structures. 相似文献
20.
Huijie Shen Michael P. Païdoussis Jihong Wen Dianlong Yu Xisen Wen 《Journal of sound and vibration》2014
The characteristics of beam-mode stability of fluid-conveying shell systems are investigated in this paper for shells with clamped-free (cantilevered) boundary conditions. An FEM algorithm is developed to conduct the investigation. A periodic shell structure of functionally graded material (FGM), termed as PFGM shell here, is designed so as to enhance the stability for the shell system, and to eliminate the stress concentration problems that exist in periodic structures. Results show that by the introduction of periodic design the critical velocities can be raised over several desired ranges of the dimensionless fluid density β, and the stress concentration is effectively reduced in the PFGM shell. Finally, the effects of the geometric shape, material parameters and spring supports on the dynamical stability are probed. 相似文献