微波聚合制备单分散、超细聚甲基丙烯酸甲酯微球

在微波辐照下,通过甲基丙烯酸甲酯(MMA)的无乳化剂乳液聚合,制备出粒径单分散、超细聚甲基丙烯酸甲酯(PMMA)微球。微波显著缩短聚合诱导期,加快聚合反应,其部分原因是微波加快引发剂过硫酸钾(KPS)的分解。实验证明微波辐照下KPS的表观分解活化能(ED)由128.3kJ/mol降低到106.0kJ/mol。单体浓度是影响PMMA乳液粒子尺寸的主要因素,在[MMA]小于0.3mol/L时,平均粒径随单体浓度提高而线形增加;[MMA]为0.3～1.0mol/L时,平均粒径稳定在约200nm;之后随单体浓度进一步增加,乳液稳定性变差。引发剂浓度增加对平均粒径影响较小,但增大引发剂浓度可显著降低粒径分散度。选取[MMA]为0.23～0.3mol/L、[KPS]为3×10-3～6×10-3mol/L可以得到粒径200nm的单分散微球。以丙酮/水(体积比1/3)为反应介质,可制备出数均粒径45nm的PMMA纳米粒子。在体系中加入3.5×10-3mol/L的Cu2+,可制备出数均粒径67nm、单分散的PMMA纳米粒子。     

微波辐照制备无皂阳离子PMMA胶乳粒子

在微波辐照条件下 ,用偶氮二异丁基脒盐酸盐 (AIBA)引发甲基丙烯酸甲酯的均聚 ,制得窄分散的无皂阳离子胶乳粒子 .讨论了引发剂的浓度、单体的浓度、离子强度等对粒子大小、分散性和乳液稳定性的影响 .对微波辐照和水浴加热进行比较 ,发现微波辐照反应速度快、反应无恒速阶段 ,所得粒子的粒径小 ,粒子数目多 ,这为通过改变反应条件制备适宜的窄分散的胶乳粒子提供了一条途径 .     

无皂阳离子MMA/HEMA胶乳粒子的制备及表征

讨论了微波辐照下带正电荷的自由基引发剂偶氮二异丁基脒盐酸盐(AIBA)引发甲基丙烯酸甲酯(MMA)和甲基丙烯酸2-羟乙酯(HEMA)共聚,用透射电子显微镜、红外光谱仪、差热分析仪等对聚合产物进行表征.结果表明: 两种单体发生了共聚反应,制得均分散、表面洁净的无皂阳离子胶乳粒子;粒子的粒径随着单体HEMA浓度的增加先减小后增加.在微波辐照下共聚反应的速率非常快,几乎所有的反应在20 min之内就能完成.随着单体HEMA浓度的增加,乳液抗电解质稳定性提高.     

无皂高分子胶乳粒子的组成、单分散性和稳定性

分别用控压微波辐照法、常压微波辐照法和常压水浴合成法制备出无皂聚苯乙烯胶乳粒子.运用静态激光光散射和动态激光光散射对粒子的表观分子量及其粒径大小与分布进行了表征.结果表明,微波辐照加热法对于形成小尺寸、单分散的胶乳粒子起着很重要的作用.通过凝胶渗透色谱仪（GPC）测定聚合产物的分子量,并结合Zimm作图法,计算出胶乳粒子所含高分子链的数目.发现由控压微波辐照法所得到的聚苯乙烯胶乳粒子的表观分子量最大,而且粒子的分散性并不是由聚合物高分子链的分散性直接决定的.在微波辐照下的无皂乳液聚合,虽然聚合物的高分子链大小不一,但它们在乳液中缠结在一起而形成的胶乳粒子却具有单分散性.通过对均聚和共聚乳液进行静置考察,发现无皂高分子胶乳粒子的稳定性与制备方法、共聚单体的结构及性质有着密切的关系.     

微波水解法制备均分散α—Fe2O3纳米粒子的初步研究

微波水解法制备均分散α－Ｆｅ２Ｏ３纳米粒子的初步研究＊汤勇铮（皖南医学院生化组芜湖２４１００１）张文敏＊＊（安徽师范大学化学系芜湖２４１０００）关键词微波辐照水解氧化铁中图分类号Ｏ６１４．８１１均分散氧化铁胶体粒子有着广泛的应用［１］，可以用作制备催...     

微波制备均分散氧化铁纳米粒子

微波制备均分散氧化铁纳米粒子汤勇铮杨红（皖南医学院生化组芜湖２４１００１）张文敏＊（安徽师范大学化学系芜湖２４１０００）关键词微波辐照纳米粒子α－Ｆｅ２Ｏ３三乙烯四胺（ＴＥＴＡ）均分散氧化铁胶体粒子有着广泛的应用［１］。可以用作制备催化剂、陶瓷、颜料...     

微波种子聚合制备单分散PMMA高分子微球

在微波辐照下，分别用过硫酸钾和偶氮二异丁基脒酸盐引发甲基丙烯酸甲酯的无皂种子聚合，在种子用量较多的情况下，聚合主要位于粒子的表面，体系中没有新的粒子形成，制得粒子大小可控的、均分散的无皂高分子微球；而体系中种子较少时，种子粒径增加，同时有新的粒子产生，粒子分为大、小两种。这为研究微球形成机理提供了信息。     

高浓度窄分布无皂高分子纳米粒子胶乳的制备

在微波辐照和丙酮存在下,进行了苯乙烯(ST)和甲基丙烯酸甲酯(MMA)的无皂乳液聚合.当丙酮的含量在50％以下时,可以得到稳定的窄分布的纳米粒子胶乳.丙酮的含量由0增加到50％,粒子的平均水化半径由278nm降低到35.4nm.在一定的浓度范围内,固定引发剂过硫酸钾（KPS）的用量,则粒子的平均水化半径与单体的浓度成正比;当单体浓度一定时,随着引发剂浓度的增加,粒子平均水化半径从25nm减少到22nm然后又增大.考虑到引发剂既是粒子表面电荷的来源,又增加了体系的离子强度,在粒子形成过程中,起着稳定和絮凝的双重作用,我们得到了一个简单的公式用以描述粒子的平均水化半径<R     

无皂乳液聚合合成均分散PMMA微球

甲基丙烯酸甲酯;微波辐照;无皂乳液聚合合成均分散PMMA微球     

采用RATRP沉淀聚合法合成聚合物PMMA和PSt

以甲基丙烯酸甲酯(MMA)或苯乙烯(St)为单体,偶氮二异丁腈(AIBN)为引发剂,乙醇为溶剂,CuCl2/PMDETA(N,N,N’,N″,N″-五甲基二乙烯基三胺)为催化体系,MMA或St经反向原子转移自由基沉淀聚合法合成了聚合物PMMA或PSt。研究结果表明:PMMA和PSt的分子量分布较窄(Mw/Mn<1.3),聚合反应速率对单体呈一级动力学特征,数均分子量与单体转化率呈线性关系。反应具有"活性"/可控聚合的特征。     

无乳化剂乳液聚合法合成单分散大粒径高分子微球的研究

无乳化剂乳液聚合法合成单分散大粒径高分子微球的研究朱世雄杜金环金熹高陈柳生（中国科学院化学研究所北京１０００８０）关键词无乳化剂乳液聚合，单分散，均相成核，低聚物胶束微米级大粒径单分散高分子微球在标准计量、情报信息、分析化学等许多领域都有广泛的...     

Study of bulk morphology of polymer latex films using laser confocal fluorescence microscopy

Ｐｏｌｙｍｅｒｆｉｌｍｆｏｒｍａｔｉｏｎｆｒｏｍｅｉｔｈｅｒｌａｔｅｘｏｒｓｏｌｕｔｉｏｎｉｓｑｕｉｔｅａｎｉｎｔｅｒｅｓｔｉｎｇｂｕｔｃｏｍｐｌｉｃａｔｅｄｓｕｂｊｅｃｔｄｅａｌｉｎｇｗｉｔｈｄｉｆｆｕｓｉｏｎ,ｉｎｔｅｒｐｅｎｅｔｒａｔｉｏｎａｎｄｃｏａｇｕｌａｔｉｏｎｏｆｐｏｌｙｍｅｒｃｈａｉｎｓ,ａｎｄｅｓｐｅｃｉａｌｌｙｃｏｒｒｅｌａｔｅｄｔｏｔｈｅｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｆｉｎａｌｌｙｆｏｒｍｅｄｆｉｌｍ.Ｍａｎｙｓｔｕｄｉｅｓ[1—3]ｈａｖｅｂｅｅｎｃａｒｒｉｅｄｏｕｔｏｎｌａｔ…     

Miniaturization of anisotropic composite particles incorporating a silica particle smaller than 100 nm

Two-step aqueous polymerizations with a water-soluble initiator of potassium persulfate were conducted to prepare anisotropic composite particles incorporating a silica core smaller than 100 nm. The two-step polymerization consisted of the first polymerization to coat the silica cores with cross-linked polymethylmethacrylate (PMMA) shell and the second polymerization to protrude a polystyrene (PSt) bulge from the core–shell particles. The concentration of ionic comonomer of sodium p-styrenesulfonate (NaSS) in the first polymerization was an important factor to stabilize the core–shell particles during the second polymerization as well as the first one, and an appropriate concentration of NaSS could prepare the anisotropic composite particles incorporating a single core. Another important factor for small, anisotropic composite particles was duration time for swelling the core–shell particles with the second monomer of styrene. Extension of the duration time from 2 to 4 h facilitated protrusion of the PSt bulge from the particles incorporating a 44-nm silica core. The composite particles were also employed to fabricate anisotropic hollow particles. Chemical etching of silica component in the composite particles with hydrofluoric acid successfully created anisotropic hollow polymer particles with a cavity size corresponding to the silica cores.     

用共混和共聚法改性聚苯胺及其电流变液的研究

通过共混和表面接枝共聚两种方法改性聚苯胺，制备聚苯胺（ＰＡｎ）复合粒子并用它们组成活性较高的电流变（ＥＲ）液．研究了ＰＡｎ复合粒子的结构与ＥＲ液性能的关系．结果表明在ＰＡｎ粒子表面涂覆聚乙烯醇或接枝聚丙烯酰胺等与ＰＡｎ能形成氢键或有化学键连接的绝缘物质可以既提高其ＥＲ液的电诱导屈服应力又降低漏电流密度．     

Hybrid polymeric latexes containing magnetite

The work describes a study for preparing polystyrene (PSt) and polymethyl methacrylate (PMMA) latex, containing magnetite (Fe₃O₄), covalently bounded to the polymeric chains. The magnetite was functionalized with various alkoxysilanes containing double bonds: vinyltriethoxysilane (VTES), methacryloyl propyl trimethoxysilane (MPTS) and vinyldimethylethoxysilane (VMe₂TES). The ferrite-silane composite forms higher average size particles with MPTS than with VTES. Ferrite functionalized with VMe₂TES forms stable latexes with both PSt and PMMA polymers. PSt forms also stable latexes with ferrite functionalized with VTES but unstable with ferrite functionalized with MPTS.     

One-step preparation of highly monodisperse micron-size particles in organic solvents

In this communication, we report the first simple and fast one-step method for synthesizing highly monodisperse micron-size PMMA particles in organic media through dispersion polymerization in the presence of PHSA (a polyhydroxyl-stearic-acid graft PMMA copolymer) as a stabilizer. There are two significant advantages of our method over earlier methods. First, by optimizing the composition of a solvent mixture of hexane and dodecane, we were able to increase the concentration of monomer up to 50-56% and obtain unusually large (up to 10 mum in diameter) PMMA particles. Second, by strictly controlling the nucleation time, we were able to make PMMA particles with a low polydispersity of around 1%, much lower than has ever before been achieved for such large particles. We also report an unusual apparent metastable state in the nucleation stage.     

Preparation of asymmetrically nanoparticle-supported, monodisperse composite dumbbells by protruding a smooth polymer bulge from rugged spheres

A novel method is proposed to create asymmetrically nanoparticle-supported, monodisperse composite dumbbells. The method consists of the three steps of double soap-free emulsion polymerizations before and after a heterocoagulation. In the first step, soap-free emulsion polymerization was conducted to cover silica cores with cross-linked poly(methyl methacrylate) (PMMA) shells. Then, positively or negatively charged silica nanoparticles were heterocoagulated with the silica-PMMA core-shell particles. In the heterocoagulations, the nanoparticles surface-modified with a cationic silane coupling agent, 3-aminopropyltriethoxysilane, were used as the positively charged ones, and silica nanoparticles without any treatment were used as the negatively charged ones. In the third step, soap-free polymerizations at different pH values were performed to protrude a polystyrene (PSt) bulge from the core-shell particles supporting the charged silica nanoparticles. In the polymerization, the core-shell particles heterocoagulated with the positively charged silica nanoparticles were aggregated in an acidic condition whereas the silica nanoparticles supported on the core-shell particles were dissolved in a basic condition. For the negatively charged silica nanoparticle, a PSt bulge was successfully protruded from the core-shell particle in acidic and neutral conditions without aggregation of the core-shell particles. The protrusion of the PSt bulge became distinctive when the number of heterocoagulated silica nanoparticles per core-shell particle was increased. Additional heterocoagulation experiments, in which positively or negatively charged magnetite nanoparticles were mixed with the asymmetrically nanoparticle-supported composite dumbbells, confirmed direct exposure of silica nanoparticles to the outer solvent phase.     

微波合成均分散胶体高分子微球

1947年美国密西很大学的研究人员在电子显微镜下首次发现，聚苯乙烯胶乳粒子是理想的均分散微球．很快地，这些颗粒成为大家公认的电子显微镜内标物，并开发出许多其它用途，如标定仪器、测定膜厚、孔隙、血管管径、填充色谱柱、检验电泳方法，以及用于蛋白质分离、检测脑膜炎、妊娠等．微波辐照对于许多有机化学反应有着明显的加速作用．与传统的方法相比，具有高效、节能、无环境污染等优点问．Murr阿等人同首次报导了用微波辐照的方法制备均分散胶体高分子微球．合成反应的时间由传统方法的6个小时缩短到不足1小时．然而，他们在实验中…     

Spectral,thermal, and electrical properties of poly(o- and m-toluidine)-polystyrene blends prepared by emulsion pathway

Conducting poly(o-toluidine) (POT) and poly(m-toluidine) (PMT) blends containing 10, 30, 50, 70, and 90 % wt/wt of polystyrene (PSt) were prepared by employing a two-step emulsion pathway. The bands characteristic of both polystyrene and POT/PMT are present in the IR spectra of POT–PSt and PMT–PSt blends. The UV-visible spectra of POT–PSt and PMT–PSt blends exhibit two bands around 313 and 610 nm, confirming that some amount of POT/PMT base is present in the blends. The EPR parameters such as line width and spin concentration reveal the presence of POT/PMT salt in the respective blends. The TGA, DTA, and DSC results suggest a higher thermal stability for the POT and PMT blends than that for the respective salts. The conductivity values of POT(70)–PSt(30) and POT(90)–PSt(10) blends are almost the same (1.1 × 10⁻² and 1.3 × 10⁻² S cm⁻¹, respectively) and these values are very close to that of pure POT salt, suggesting that POT can be blended with up to 30% wt/wt of PSt to improve its mechanical properties without a significant drop in its conductivity. The conductivity values of PMT–PSt blends are lower than those of the corresponding POT–PSt blends by two to three orders of magnitude, indicating that POT is a better system than PMT to prepare blends by this method. The dielectric constant and tan δ values of the blends increase with the amount POT/PMT and are greater than that of polystyrene. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2291–2299, 1998