Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

岩石的核磁共振弛豫时间加权微成像

根据自旋回波成像脉冲序列中像点信号强度与重复时间TR及回波时间TE的关系，结合岩石孔隙流体核磁共振她豫的多指数特性，利用T1加权和T2加权微成像提取岩样扎隙结构的信息，以此区分大孔和微孔．1实验方法自旋回波单片核磁共振成像脉冲序列如图1所示问．图中，GX为X方向的梯度场，用于信号的频率编码，实现X方向的空间定位；GY为Y方向的梯度场，用于信号的相位编码，实现Y方向的空间定位；GZ为Z方向的梯度场，结合形状脉冲，用于确定选片的位置及片厚，实现Z方向的空间定位．RF是射频脉冲发射通道，由90°宽带脉冲和180℃窄带形状…     

Saturation-dependent nuclear magnetic resonance relaxation of fluids confined inside porous media with micrometer-sized pores

In the present study, we investigate the relationship between the relaxation rate and the filling factor in partially saturated porous media. The filling fluids are polar (water, acetone) and nonpolar (cyclohexane, hexane). The porous sample is a silica glass (Vitrapor#5) with the nominal mean pore size of d = 1 μm ( ± 0.6 μm). All nuclear magnetic resonance relaxation experiments are performed at 20 °C using a NMR instrument operable at 20 MHz proton resonance frequency. The experimental results are compared with a two-phase exchange model providing us information on the strength of surface relaxation and fluid distribution inside pores. These results will affect the NMR estimations about fluid content of porous media.     

两种偶氮分子玻璃材料的光致取向特性

利用光诱导双折射和偏振红外光谱法研究了2种无定形树枝状偶氮分子材料G1-AZ-CN和G2-AZ-CN的光致取向行为, 对其偶氮生色团及非光响应性星形核的光致取向速度、 取向松弛速度和饱和取向程度进行了系统研究. 结果表明, G2-AZ-CN中偶氮生色团和星形核的光致取向速度快于G1-AZ-CN, 但其取向松弛速度慢于G1-AZ-CN, 这与G2-AZ-CN具有更高的偶氮生色团密度有关. G1-AZ-CN具有较高的饱和取向程度及较好的取向稳定性. 与具有相同类型偶氮生色团的偶氮聚合物BP-AZ-CN相比, G1-AZ-CN和G2-AZ-CN中偶氮生色团表现出较慢的取向速度. 其取向行为与其特殊的星形分子结构有关.     

NMR microscopy - limitations and applications in material sciences -

Alongside the numerous applications of NMR spectroscopy in analytical chemistry, materials sciences and morphological studies by magnetic resonance imaging (MRI), NMR microscopy makes possible a whole new range of applications in materials sciences such as the development and non destructive testing of polymers and ceramic materials. This includes imaging of microscopic structures and structural changes in such materials. The contrast in the images is determined by the NMR specific parameters chemical shift δ, spin density ρ, spin lattice relaxation time T₁, spin spin relaxation time T₂ and spin lattice relaxation time in the rotating frame T_1ρ. The numerous well developed methods available make it possible to study dynamic processes by fast imaging, the measurement of diffusion constants of solvents or liquids, the mobility of fluids in polymers or ceramics or the three dimensional evaluation of pore sizes in porous materials.     

Nuclear spin relaxation of mesogenic fluids in spherical microcavities

We discuss the nuclear spin relaxation resulting from molecular translational diffusion of a liquid crystal in the isotropic phase confined to spherical microcavities. The relaxation is induced by the time modulation of spin interactions as molecules diffuse between the ordered surface layer into the isotropic interior volume and back. The calculated spin-lattice relaxation rate T(1) (-1) shows three distinct dispersion regimes: a plateau at the lowest frequencies, practically independent of the size of the cavity, an intermediate power-law dispersion regime with an exponent between -0.7 and -1, depending on the spatial profile of the order parameter and cavity radius, and at frequencies above 1 MHz a strong dispersion tending toward the quadratic dependence of the relaxation rate on the Larmor frequency in the high-frequency limit. The pretransitional increase in T(1) (-1) depends drastically on the Larmor frequency. The frequency and temperature dependences of T(1) (-1) yield not only information on the magnitude of the surface order parameter, but also on its spatial profile, revealing the type of liquid-crystal-substrate interactions. Apart from thermotropic liquid crystals in the isotropic phase, this analysis can be also applied to other fluids in porous media.     

低场核磁共振法对油基钻井液乳状液乳滴稳定性的研究

采用低场核磁共振技术,针对油基钻井液油包水型乳状液乳滴的稳定性进行研究。引入弛豫试剂Mn Cl2·4H2O对W/Q型乳状液的T2分布曲线进行定性分析,位于10~1 000 ms之间的弛豫峰对应于中度可自由移动水和白油弛豫峰的叠合峰,定义为乳状液弛豫峰;1 000~10 000 ms之间的峰为高度可自由移动水的弛豫峰。基于此,以弛豫峰峰形为定性指标,弛豫峰面积比率和弛豫峰间距为定量指标,针对弛豫试剂、油水比和老化温度等因素对乳状液横向弛豫时间T2分布曲线的影响进行了分析,进而深入研究了其对油基钻井液乳状液乳滴稳定性的影响。还将低场核磁共振分析技术运用于油基钻井液乳状液体系相对含油率的测量。结果表明,低场核磁共振是一种高效、快捷、准确反映油基钻井液乳状液稳定性的分析测试技术,同时,还可用于油基钻井液乳状液或原油相对含油率的测量。     

Molecular exchange dynamics in partially filled microscale and nanoscale pores of silica glasses studied by field-cycling nuclear magnetic resonance relaxometry

Nuclear magnetic spin-lattice relaxation experiments have been performed in partially filled porous glasses with wetting and nonwetting fluids. The frequency dependence of the spin-lattice relaxation rate in Vycor (4 nm pores) and VitraPOR #5 (1 microm pores) silica glasses was studied as a function of the filling degree with the aid of field-cycling NMR relaxometry. The species of primary interest were water ("polar") and cyclohexane ("nonpolar"). Spin-lattice relaxation was examined in the frequency range from 1 kHz to 400 MHz with the aid of a field-cycling NMR relaxometer and an ordinary 400 MHz NMR spectrometer. Three different mobility states of the fluid molecules are distinguished: The adsorbed state at the pore walls, the bulklike liquid phase, and the vapor phase. The adsorbate spin-lattice relaxation rate is dominated by the "reorientation mediated by translational displacements" (RMTD) mechanism taking place at the adsorbate/matrix interface at frequencies low enough to neglect rotational diffusion of the molecules. The experimental data are analyzed in terms of molecular exchange between the different mobility states. Judged from the dependence of the spin-lattice relaxation rates on the filling degree, limits for slow and fast exchange (relative to the RMTD time scale) can be distinguished and identified. It is concluded that water always shows the features of slow exchange irrespective of the investigated pore sizes and filling degrees. This is in contrast to cyclohexane which is subject to slow exchange in micrometer pores, whereas fast exchange occurs in nanoscopic pores. The latter case implies that the vapor phase contributes to molecular dynamics in this case at low filling degrees while it is negligible otherwise.     

A comparison of magnetic resonance imaging methods for fluid content imaging in porous media

Quantitative measurements are important for imaging fluid content in porous media. Conventional MRI methods suffer from contrast because of relaxation times in porous media, resulting in measurements of apparent fluid content, not the true fluid content. We compare four magnetic resonance imaging methods for fluid content imaging in several water‐saturated reservoir core plugs: frequency‐encoded spin echo, single point ramped imaging with T₁ enhancement, hybrid spin echo single point imaging (SE‐SPI), and T₂ mapping SE‐SPI. 1‐D profiles obtained with each method were compared in terms of image quality, image sensitivity, and quantification of water content. The image quality of short T₂ lifetime samples suffered from blurring in hybrid SE‐SPI images. Image sensitivity was the highest in the profiles obtained with frequency‐encoded spin echo. The quantification of frequency‐encoded spin echo, T₂ mapping SE‐SPI, and hybrid SE‐SPI suffered in core plugs with a significant population of short T₂ components because of T₂ attenuation. Overall, single point ramped imaging with T₁ enhancement was found to be the most general method for fluid content imaging. Copyright © 2013 John Wiley & Sons, Ltd.     

Flow of non‐newtonian fluids in porous media

The study of flow of non‐Newtonian fluids in porous media is very important and serves a wide variety of practical applications in processes such as enhanced oil recovery from underground reservoirs, filtration of polymer solutions and soil remediation through the removal of liquid pollutants. These fluids occur in diverse natural and synthetic forms and can be regarded as the rule rather than the exception. They show very complex strain and time dependent behavior and may have initial yield‐stress. Their common feature is that they do not obey the simple Newtonian relation of proportionality between stress and rate of deformation. Non‐Newtonian fluids are generally classified into three main categories: time‐independent whose strain rate solely depends on the instantaneous stress, time‐dependent whose strain rate is a function of both magnitude and duration of the applied stress and viscoelastic which shows partial elastic recovery on removal of the deforming stress and usually demonstrates both time and strain dependency. In this article, the key aspects of these fluids are reviewed with particular emphasis on single‐phase flow through porous media. The four main approaches for describing the flow in porous media are examined and assessed. These are: continuum models, bundle of tubes models, numerical methods and pore‐scale network modeling. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010