掠射椭偏术对K4[Fe（CN）6]／K3[Fe（CN）6]电极反应的研究

提出掠射椭圆偏振测试技术的实验方案，应用该掠射式技术循环 安法研究了在镀有Ｉｎ２Ｏ３玻璃片上进行的Ｋ４「Ｆｅ（ＣＮ）６」／Ｋ３「Ｆｅ（ＣＮ）６」电极反应，结果证明：掠射椭圆偏嗥中在电化学反应过程中现场测定椭圆偏振参数及其变化规律，这些规律与所发生的表面电化学反应规律相对应，由此可以对电极体系进行研究，现场掠射椭圆偏振术还能用于分析表面扩散层的性质，弥补其它界面研究方法的缺陷。     

应用Fe2+与K3[Fe(CN)6]反应测定还原性物质Vc

在pH 2～3的溶液中,低浓度Fe^2＋与K3[Fe（CN）6]反应产生的蓝色沉淀为近似真溶液,最大吸收波长为710 nm.形成的近似真溶液吸光度随静置时间变化而逐渐变大,30 min后吸光度变化缓慢.K3[Fe（CN）6]过量时,Fe^2＋浓度与吸光度呈很好的线性关系.Fe^2＋浓度较大时,易形成絮状沉淀.在pH 2～3的Fe^3＋-K3[Fe（CN）6]体系中,加入Vc能将Fe^3＋还原成Fe^2＋,进而与K3[Fe（CN）6]反应,30 min后测定蓝色拟真溶液的吸光度,Vc的量与溶液的吸光度同样有很好的线性关系,线性相关系数R〉0.999,检出限为0.94μg.     

A Study on Thermal Decomposition of K_3[Fe(CN)_6] and KFe[Fe(CN)_6] in Helium

K3 [Fe(CN)6] and KFe[Fe(CN)6] are classical coordination compounds. However, the mechanism of decomposition reactions has not been well expounded. The gas products of thermal decomposition were examined by gas chroma tography (GC) , and the structure of the solid products by Mossbauer spectroscopy(MS) and X-ray diffraction(XRD). The findings are explained in terms of the theory of coordination chemistry and a decomposition mechanism is proposed in this study. On the basis of various experimental results, the first stage of the decomposition of K3[Fe(CN)6] in He was found to be the evolution of(CN)2 resulting in the reduction of Fe(Ⅲ)12K3 [Fe(CN)6]→9K4[Fe(CN)6] + Fe2 [Fe(CN)6] + 6 ( CN )For KFe [Fe(CN) 6 ], the first stage of decomposition man be represented as6KFe[Fe(CN)6]→3K2Fe[Fe(CN)6] + 2Fe2[Fe(CN)6 + 3(CN)2At higher temperatures, the decomposition of both K3[Fe(CN)6) andKFe[Fe(CN)6] to form KCN and Fe2C was accomplished by the release of(CN)2 and N2.     

用异丙肾上腺素检定[Fe(CN)6]3-

将医用药物异丙肾上腺素引入分析化学作新显色剂,报道了异丙肾上腺素与[Fe(CN)6]3-进行显色反应的最佳条件、灵敏度、选择性和允许共存比.建立了微量的[Fe(CN)6]3-简便检定新方法,检出限为0.055μg,稀释限为14.5×106.     

K4[Fe(CN)6]作为氰源在氰基化反应中的应用**

过渡金属催化氰基化反应成为合成芳基腈化物的重要手段之一。2004年,无毒、廉价的K4[Fe(CN)6]首次被用来代替传统的KCN、NaCN及CuCN等作为氰源用于芳基卤代物的氰基化反应。K4[Fe(CN)6]作为氰源时无需复杂的预处理,其6个氰根均可参与反应。该反应为氰基化反应开创了一个新的研究方向,迅速得到了众多研究者的青睐。K4[Fe(CN)6]用于氰基化反应的研究也得到了较快的发展。本文主要综述了近年来K4[Fe(CN)6]作为氰源用于卤代芳烃和芳基氟代磺酸酯的氰基化反应。主要介绍了在钯催化剂和铜催化剂作用下,以K4[Fe(CN)6]为氰源的氰基化反应在配体、反应介质和底物适用范围等方面的研究成果。     

γ-二氧化锰/K3[Fe(CN)6]溶液界面的电子转移反转区

Marcus电子转移理论的主要成果之一是预言了电子转移反应反转区的存在.从实验上 验证Marcus反转区仍是一个热点问题.通过对γ-MnO2/K3[Fe(CN)6]溶液界面平带电位、极 化曲线的测量,计算了在极化条件下,γ-MnO2导带的电子直接转移到溶液中氧化态物种[F e(CN)6]3-空电子能级上的速率常数ket,logket对外加电位作图,观察到了Marcus反转区. 从理论上也论证了在半导体/溶液界面上的直接电子转移反转区的存在.     

掠射椭偏术对K_4〔Fe(CN)_6〕/K_3〔Fe(CN)_6〕电极反应的研究

提出掠射椭圆偏振测试技术的实验方案,应用该掠射式技术结合循环伏安法研究了在镀有Ｉｎ２Ｏ３玻璃片上进行的Ｋ４〔Ｆｅ（ＣＮ）６〕／Ｋ３〔Ｆｅ（ＣＮ）６〕电极反应．结果证明：掠射椭圆偏振术可在电化学反应过程中现场测定椭圆偏振参数及其变化规律,这些规律与所发生的表面电化学反应规律相对应,由此可以对电极体系进行研究;现场掠射椭圆偏振术还能用于分析表面扩散层的性质,弥补其它界面研究方法的缺陷．     

Mossbauer study of reactions of Sn[Fe(CN)_6] on supports

Mossbauer spectroscopy has been applied to the investigation of reaction of Sn[Fe(CN)6] on magnesia, 7-alumina, silica and activated carbon. It was found that the thermal decomposition products of supported Sn[Fe(CN)6] are quite different from those of the unsupported one as a result of the interaction between the complex and supports. The supports could promote the oxidation in the air atmosphere and their effect led to high dispersion of the decomposition products on the surface.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

K4[Fe(CN)6]-K3[Fe(CN)6]体系催化分光光度法测定痕量汞

建立了一种测定痕量汞的催化分光光度新方法,它是基于汞能催化亚铁氰化钾分解生成Fe2 ,生成的Fe2 又与铁氰化钾反应生成兰色胶体溶液.方法的相对标准偏差≤5.3%,回收率为98.8%～104.8%之间,检出限为9.8×10-7 g/L;线性范围为0～0.050 μg/mL.     

Fe L-edge XAS studies of K4[Fe(CN)6] and K3[Fe(CN)6]: a direct probe of back-bonding

Distinct spectral features at the Fe L-edge of the two compounds K3[Fe(CN)6] and K4[Fe(CN)6] have been identified and characterized as arising from contributions of the ligand pi orbitals due to metal-to-ligand back-bonding. In addition, the L-edge energy shifts and total intensities allow changes in the ligand field and effective nuclear charge to be determined. It is found that the ligand field term dominates the edge energy shift. The results of the experimental analysis were compared to BP86 DFT calculations. The overall agreement between the calculations and experiment is good; however, a larger difference in the amount of pi back-donation between Fe(II) and Fe(III) is found experimentally. The analysis of L-edge spectral shape, energy shift, and total intensity demonstrates that Fe L-edge X-ray absorption spectroscopy provides a direct probe of metal-to-ligand back-bonding.     

Preparation of57Fe enriched K4[Fe(CN)6] and K3[Fe(CN)6]

A simple method to prepare⁵⁷Fe enriched K₄[Fe(CN)₆] and K₃[Fe(CN)₆] is described. The yields of the products are much better than those reported in the literature so far. The enrichment is essential for⁵⁷Fe Mössbauer investigation in a variety of Prussiate type complexes and other inorganic compounds which are conveniently prepared from K₄[Fe(CN)₆] and K₃[Fe(CN)₆]. K₄[Fe(CN)₆] was obtained by reacting freshly prepared Fe(OH)₃ with glacial acetic acid and treating with iron acetate in boiling aqueous solution of KCN. The novel feature of the procedure to obtain K₃[Fe(CN)₆] is that the oxidation of K₄[Fe(CN)₆] has been carried out in the solid state by passing chlorine gas over the powdered specimen. K₃[Fe(CN)₆] was crystallised from alkaline solution of this oxidised powder. The compounds were characterised by Mössbauer spectroscopy.     

CrIII(NCMe)6]3+--a labile CrIII source enabling formation of Cr[M(CN)6] (M=V, Cr, Mn, Fe) Prussian blue-type magnetic materials

The kinetic inertness of the hexaaquachromium(III) (kH2O=2.4x10(-6) s(-1)) has led to challenges with respect to incorporating CrIII ions into Prussian blue-type materials; however, hexakis(acetonitrile)chromium(III) was shown to be substantially more labile (approximately 10(4) times) and enables a new synthetic route for the synthesis of these materials via nonaqueous solvents. The synthesis, spectroscopic, and physical properties of Cr[M(CN)6] (M=V, Cr, Mn, Fe) Prussian blue analogues synthesized from [CrIII(NCMe)6]3+ and the corresponding [MIII(CN)6]3- are described. All these compounds {(NEt4)0.02CrIII[VIII(CN)6]0.98(BF4)(0.08).0.10MeCN (1), CrIII[CrIII(CN)6].0.16MeCN (2), CrIII[MnIII(CN)6].0.10MeCN (3), and (NEt4)0.04CrIII0.64CrIV0.40[FeII(CN)6]0.40[FeIII(CN)6]0.60(BF4)(0.16).1.02MeCN (4)} are ferrimagnets exhibiting cluster-glass behavior. Strong antiferromagnetic coupling was observed for M=V, Cr, and Mn with Weiss constants (theta) ranging from -132 to -524 K; and in 2, where the strongest coupling is observed (theta=-524 K), the highest Tc (110 K) value was observed. Weak antiferromagnetic coupling was observed for M=Fe (theta=-12 K) leading to the lowest Tc (3 K) value in this series. Weak coupling and the low Tc value observed in 4 were additionally contributed by the presence of both [FeII(CN)6]4- and [FeIII(CN)6]3- as confirmed by 57Fe-M?ssbauer spectroscopy.     

A Novel 3D Heterobimetallic Cyano-bridged Coor- dination Polymer {(NH_4)_2[Cd(H_2O)Fe(CN)_6]}_n:Synthesis and Crystal Structure

A novel heterobimetallic coordination polymer, {(NH4)2[Cd(H2O)Fe(CN)6]}n 1, has been synthesized by using the slow diffusion method and structurally characterized by elemental analysis, IR spectroscopy and single-crystal X-ray diffraction. The crystal crystallizes in the monoclinic system, space group P21/n, a = 7.4202(16), b = 14.939(3), c = 10.868(2) A and ? = 91.660(3)A. For 1, five CN groups of Fe(CN)6]4- are involved in bridging. The polymer displays a 3D open microporous framework with 5-connected uninodal(46.64) topology.     

Synthesis and Crystal Structure of an Ionic Compound [Fe(CN)_6(phCH_2NC_5H_5)3]·(H_2O)_4

A novel ionic compound [Fe(CN)6(phCH2NC5H5)3]·(H2O)4(Mr = 794.71) has been synthesized and its structure was characterized by IR, elemental analysis and X-ray diffraction. The compound crystallizes in monoclinic, space group P21/c with a = 10.837(2), b = 16.551(3), c = 23.402(5) , β = 97.531(4)o, V = 4161.0(15) A3, Z = 4, Dc = 1.269 g/cm3, F(000) = 1668, μ = 0.414 mm-1, R = 0.0479 and wR = 0.1232. The building unit of the title compound consists of three (phCH2N+C5H5) ions, one [Fe(CN)6]3- anion and four water molecules. According to the structural analysis, [Fe(CN)6]3- are linked together by O–H···N and O–H···O hydrogen bonds, but [Fe(CN)6]3- and [(phCH2N+C5H5)3] ions are bound by electrostatic force to form an ionic compound.     

新型氰基桥联二维配位聚合物{[Fe(salen)]_2[Ni(CN)_4]}_n的合成、晶体结构和磁性质

将[Fe(salen)NO_3]的甲醇溶液和K_2[Ni(CN)_4]·H_2O水溶液通过H管扩散反 应,得到了一个新型氰基桥联配位聚合物{[Fe(salen)]_2[Ni(CN)_4]}_n (H_2salen为N,N'-二水杨醛缩乙二胺席夫碱)。该化合物属四方晶系。空间群 P4/ncc,晶胞参数为a=b=1.4216(2)nm, c=1.7471(5)nm, V=3.5308(12)nm~3,Z=.该 配合物通过Ni-CN-Fe(salen)-NC-Ni链连接形成二维枕形网格结构,其中键长Ni-C 0.1876(3)nm, Fe-N 0.2170(3) nm, 键角Fe-N-C 164.9(3)°,Ni-C-N 178.9(4) °;金属中心Ni(III)和Fe(III)分别具有正方形和畸形变八面体配位构型。变温磁 化率研究表明,配合物存在分子内反铁磁相互作用,其Fe(III)…Fe(III)交换积分 为-0.041cm~(-1).     

Hydrogen storage in the dehydrated prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn)

The porosity and hydrogen storage properties for the dehydrated Prussian blue analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn) are reported. Argon sorption isotherms measured at 87 K afford BET surface areas ranging from 560 m2/g for Ni3[Co(CN)6]2 to 870 m2/g for Mn3[Co(CN)6]2; the latter value is comparable to the highest surface area reported for any known zeolite. All six compounds show significant hydrogen sorption at 77 K and 890 Torr, varying from 1.4 wt % and 0.018 kg H2/L for Zn3[Co(CN)6]2 to 1.8 wt % and 0.025 kg H2/L for Cu3[Co(CN)6]2. Fits to the sorption data employing the Langmuir-Freundlich equation give maximum uptake quantities, resulting in a predicted storage capacity of 2.1 wt % and 0.029 kg H2/L for Cu3[Co(CN)6]2 at saturation. Enthalpies of adsorption for the frameworks were calculated from hydrogen isotherms measured at 77 and 87 K and found to increase with M varying in the order Mn < Zn < Fe < Co < Cu < Ni. In all cases, the binding enthalpies, which lie in the range of 5.3-7.4 kJ/mol, are higher than the 4.7-5.2 kJ/mol measured for Zn4O(1,4-benzenedicarboxylate)3.     

Sorption of [Fe(CN)6]3− and [Fe(CN)6]4− ions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels from aqueous solutions

The sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions on the surface of Fe(III), Cr(III), and Zr(IV) oxyhydroxide hydrogels at various pH values of hydrogel precipitation from solutions without a support electrolyte and from NaCl and Na₂SO₄ solutions with an ionic strength of 0.5 was studied. It was found that isotherms of sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions from solutions without a support electrolyte and from NaCl solutions and those of sorption of [Fe(CN)₆]^4? from Na₂SO₄ solutions are described by the Langmuir equation. It was established that the sulfate background suppresses the sorption of [Fe(CN)₆]^3? on Fe(III) and Zr(IV) oxyhydroxides. Both anions are sorbed only when the surface of the oxyhydroxides is charged positively; the Langmuir equation parameters A _max and K tend to decrease to the point of zero charge as the pH value of oxyhydroxide precipitation increases. An electrostatic mechanism of the sorption of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? anions was suggested.     

Bimetallic cyanide-bridged complexes based on the photochromic nitroprusside anion and paramagnetic metal complexes. Syntheses, structures, and physical characterization of the coordination compounds [Ni(en)2]4[Fe(CN)5NO]2[Fe(CN)6]x5H2O, [Ni(en)2][Fe(CN)5NO]x3H2O, [Mn(3-MeOsalen)(H2O)]2[Fe(CN)5NO], and [Mn(5-Brsalen)]2[Fe(CN)5NO

The synthesis, crystal structure, and physical characterization of the coordination compounds [Ni(en)2]4[Fe(CN)5NO]2[Fe(CN)6]x5H2O (1), [Ni(en)2][Fe(CN)5NO]x3H2O (2), [Mn(3-MeOsalen)(H2O)]2[Fe(CN)5NO] (3), and [Mn(5-Brsalen)]2[Fe(CN)5NO] (4) are presented. 1 crystallizes in the monoclinic space group P2(1)/n (a = 7.407(4) A, b = 28.963(6) A, c = 14.744(5) A, alpha = 90 degrees, beta = 103.26(4) degrees, gamma = 90 degrees, Z = 2). Its structure consists of branched linear chains formed by cis-[Ni(en)2]2+ cations and ferrocyanide and nitroprusside anions. The presence of two kinds of iron(II) sites has been demonstrated by M?ssbauer spectroscopy. 2 crystallizes in the monoclinic space group P2(1)/c (a = 11.076(3) A, b = 10.983(2) A, c = 17.018(5) A, alpha = 90 degrees, beta = 107.25(2) degrees, gamma = 90 degrees, Z = 4). Its structure consists of zigzag chains formed by an alternated array of cis-[Ni(en)2]2+ cations and nitroprusside anions. 3 crystallizes in the triclinic space group P1 (a = 8.896(5) A, b = 10.430(5) A, c = 12.699(5) A, alpha = 71.110(5) degrees, beta = 79.990(5) degrees, gamma = 89.470(5) degrees, Z = 1). Its structure comprises neutral trinuclear bimetallic complexes in which a central [Fe(CN)5NO]2- anion is linked to two [Mn(3-MeOsalen)]+ cations. 4 crystallizes in the tetragonal space group P4/ncc (a = 13.630(5) A, c = 21.420(8) A, Z = 4). Its structure shows an extended 2D neutral network formed by cyclic octameric [-Mn-NC-Fe-CN-]4 units. The magnetic properties of these compounds indicate the presence of quasi-isolated paramagnetic Ni2+ and Mn3+. Irradiated samples of the four compounds have been studied by differential scanning calorimetry to detect the existence of the long-lived metastable states of nitroprusside.