自探针荧光法研究十二烷基苯磺酸钠与TritonX-100相互作用

采用荧光光谱法研究了十二烷基苯磺酸钠（SDBS）与非离子表面活性剂TritonX-100混合体系在水溶液中聚集体的性质。 发现在浓度与荧光强度的关系曲线上存在2个转折点,分别对应于混合体系的临界胶团浓度和胶团形状发生转变的浓度。 通过混合胶团相互作用关系,计算了SDBS与TritonX-100的相互作用参数βM,说明SDBS以其自身所带生色基团苯磺酸与TritonX-100发生了协调效应且存在着较强的相互作用。     

十二烷基季铵盐及其与十二烷基硫酸钠混合体系的表面活性

通过表面张力测定，研究了十二烷基季铵盐Ｃ１２Ｈ２５Ｎ（ＣｎＨ２ｎ＋１）３Ｂｒ（ｎ＝１，２，３，４）及其与十二烷基硫酸钠混合体系的表面活性，应用规则溶液理论，计算了混合体系表面吸附层和胶团的组成及分子相互作用参数，对于季铵盐、极性基影响大：ｃｍｃ随ｎ增加而下降，γｃｍｃ则先上升，后下降，自极性基碳链的空间阻碍、疏水、弯曲效应，以及电荷屏蔽效应可对此予以解释，对于混合体系，极性基大小对其表面活性及胶团     

Triton X-100/CTAB在乙二醇/水混合溶剂中的热力学性质和胶团化行为

利用表面张力法, 研究了非离子表面活性剂Triton X-100和离子表面活性剂十六烷基三甲基溴化铵(CTAB)混合体系在混合极性溶剂乙二醇/水(乙二醇的体积分数分别为5%、10%和20%)中的热力学性质和胶团化行为. 结果表明, 混合体系在乙二醇水溶液中存在协同效应, 临界胶束浓度随乙二醇含量的增加而增大. 利用Rubingh和Maeda模型计算了混合物中各组分在胶团相中的组成、相互作用参数以及自由能的贡献. 在实验研究的乙二醇浓度范围内, 发现该非离子/离子混合体系在离子组分摩尔分数约为0.3时, 协同效应最强.     

酯基Gemini型季铵盐表面活性剂与SDS的相互作用

研究了酯基Gemini型季铵盐表面活性剂[Cm-1H2m-1COOCH2CH2(CH3)2N+(CH2)n+N(CH3)2CH2CH2OOCCm-1H2m-1]•2Br-(简称II-m-n, m=10, 12; n=3, 4, 6)与十二烷基硫酸钠(SDS)的复配体系的相互作用以及无机盐(NaBr)对复配体系表面活性的影响. 结果发现, 其复配体系具有显著的胶团化协同增效作用和降低表面张力的增效作用, 并且II-10-n与SDS的复配体系的增效作用具有等链长效应. II-m-n/SDS复配体系的胶团化协同增效作用随n增大而增强. 混合胶团中II-m-n与SDS的摩尔比均近似为1:1, 显示各复配体系的混合胶团均带电性, 因此NaBr的加入能增强复配体系的表面活性和促进混合胶团的形成.     

不等链长的碳氟、碳氢正负离子表面活性剂混合体系的表面活性

研究了全氟辛酸钠与溴化十四烷基三甲铵混合水溶液的表面活性. 测定了不同比例混合物水溶液的表面张力-浓度曲线, 得出临界胶团浓度(cmc)及监 界胶团浓度时的溶液表面张力(γcmc)值. 应用Gibbs吸附公式及吸附层中两表面活性剂分子相互作用参数法求出表面总吸附量、吸附层组成及两表面活性剂分别吸附量等. 指示此吸附层具有多分子层性质. 这可能是碳氢、碳氟正负离子混合体系的特点.     

乙醇/水混合溶剂中Gemini表面活性剂的表面性质

通过对Gemini表面活性剂12-s-12 (Et)(s=4, 6, 8, 10, 12)体系在乙醇/水混合溶剂中的表面张力曲线的测定, 对该体系的表面性质进行了研究. 发现随乙醇/水比例变化, Gemini各种表面化学性质, 如临界胶束浓度(cmc)、表面张力(γcmc)、饱和吸附量(Γmax)和最小分子占有面积(Amin)等的变化规律. 拓展了Gemini表面活性剂在混合溶剂中表面吸附的研究.     

烷基磷（膦）酸萃取剂钠盐与非离子表面活性剂AEO_9混合体系胶团的形成和分子间的相互作用

本文研究了烷基磷（膦）酸萃取剂钠盐ＮａＥＨＥＨＰ，ＮａＤＴＭＰＰ，Ｎａ_２（ＭＥＨＰ）与非离子表面活性剂ＡＥＯ_９以不同比例复配后水溶液胶团的形成及分子间的相互作用，结果表明混合胶团的形成使ＣＭＣ大大降低。分子间在胶团中的相互作用强弱为：Ｎａ_２（ＭＥＨＰ）体系＞ＮａＤＴＭＰＰ体系＞ＮａＥＨＥＨＰ体系，分子间在表面层的吸引作用小于同体系分子间在胶团中的相互作用，这一结果有利于混合胶团的形成。     

10-十一烯酸衍生物混合体系的表面化学

自表面张力测定对１０－十一烯酸胆碱衍生物（三甲基－［２－（１０－十一烯酰氧乙基）］碘化铵）与１０－十一烯酸钠混合体系的表面吸附和胶团形成作了研究；对该体系中的囊泡形成进行了电镜观察。结果表明，疏水链端基为不饱和烯基的正、负离子表面活性剂混合体系和有饱和疏水链的混合体系一样，也有很高的表面活性，易于表面吸附和形成胶团，并且容易在水及乙醇－水溶液中形成相当稳定的囊泡。这些结果的原因可归之于正、负表面活     

烷基磷（膦）酸萃取剂钠盐与非离子表面活性剂AEO9混合体系胶团的…

本文研究了烷基磷（膦）酸萃取剂钠盐ＮａＥＨＥＨＰ，ＮａＤＴＭＰＰ，Ｎａ２（ＭＥＨＰ）与非离子表面活性剂ＡＥＯ９以不同比例复配后水溶液胶团的形成及分子间的相互作用结果表明混合胶团的形成使ＣＭＣ大大降低，分子间在胶团中的相互中弱为，Ｎａ２（ＭＥＨＰ）体系〉ＮａＤＴＭＰＰ体系〉ＮａＥＨＥＨＰ体系，分子间在表面层的作用小于同体系分子间在胶团中的相互作用，这一结果有利于混合胶团的形成。     

芘从H2O/DMF溶剂向两亲嵌段共聚物平头胶团增溶

发展了从荧光发射谱计算芘（Py）增溶量的方法,以此研究Py从H2O／DMF混合溶剂向PS-b-PAA二嵌段共聚物平头胶团的增溶．实验结果表明,混合溶剂中水含量强烈影响Py的增溶,随水含量增加,Py增溶量增大．结合公式和分布系数,计算并讨论了Py的增溶等温线．理论处理给出了从实验荧光强度直接计算Py在胶团和溶剂相间分布系数的方法     

Mixed micelle formation among anionic gemini surfactant (212) and its monomer (SDMA) with conventional surfactants (C12E5 and C12E8) in brine solution at pH 11

The micellization of anionic gemini surfactant, N,N'-ethylene(bis(sodium N-dodecanoyl-beta-alaninate)) (212), and its monomer, N-dodecanoyl-N-methyl alaninate (SDMA), and polyethoxylated nonionic surfactants, C(12)E(5) and C(12)E(8), has been studied tensiometrically in pure and mixed states in an aqueous solution of 0.1 M NaCl at pH 11 to determine physicochemical properties such as critical micellar concentration (cmc), surface tension at the cmc (gamma(cmc)), maximum surface excess (Gamma(max)) and minimum area per surfactant molecule at the air/water interface (A(min)). The theories of Rosen, Rubingh, Motomura, Maeda, and Nagarajan have been applied to investigate the interaction between those surfactants at the interface and in the micellar solution, the composition of the aggregates formed, the theoretical cmc in pure and mixed states, and the structural parameters as proposed by Tanford and Israelachvili. Various thermodynamic parameters (free energy of micellization and interfacial adsorption) have been calculated with the help of regular solution theory and the pseudophase model for micellization.     

新型Gemini咪唑表面活性剂的合成及表面性能

以2,2-双(溴甲基)-1,3-丙二醇为连接基合成了新型的连接基为枝状的Gemini咪唑表面活性剂2,4-二(溴化-3-烷基咪唑)-1,3-丙二醇([Cn-P-Cnim]Br2,n=10,12,14).产物经核磁共振氢谱(1H NMR)、红外(IR)光谱和元素分析等进行了分析,证明所得产物即为目标产物.通过表面张力法和电导法测量其表面活性并计算胶束形成热力学参数(ΔG m—0,ΔH m—0,ΔS m—0).结果表明,25℃时3种表面活性剂均具有很高的表面活性,胶束的形成是自发的熵驱动过程.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。     

N-酰基-L-丝氨酸钠表面活性剂的合成和胶束化热力学性质

以L-丝氨酸和长链酰氯为原料,合成了3种不同碳链长度（n=8,12,14）的N-酰基-L-丝氨酸。 并以1H NMR、ESI-MS和元素分析对3种目标产物进行了表征。 采用表面张力法研究了N-酰基-L-丝氨酸钠在298、308、318和328 K时水溶液中的聚集行为,确定了临界胶束浓度（cmc）、临界胶束浓度下的最低表面张力（γcmc）、表面饱和吸附量Γmax。 由cmc和温度的关系,应用相分离模型计算了胶束化热力学参数ΔGom、ΔHom和ΔSom。 结果表明,ΔGom＜0,ΔHom的绝对值比-TΔSom绝对值小的多,说明胶束化过程为熵驱动过程,随着温度的升高,胶束化过程是熵-焓补偿的过程。     

Self-aggregation of binary mixtures of alkyltriphenylphosphonium bromides: a critical assessment in favor of more than one kind of micelle formation

The micellization behavior of binary combinations of alkyltriphenylphosphonium bromides (ATPBs) with alkyl chain carbons 10, 12, 14, and 16 has been studied by conductometry and calorimetry. The combinations C(10)-C(12), C(10)-C(14), C(10)-C(16), C(12)-C(14), C(12)-C(16), and C(14)-C(16) were found to form two cmc's by both the methods, with good agreement, except C(14)-C(16)TPB, which has evidenced only a single cmc by calorimetry for all combinations. The combinations C(10)-C(12) (for both cmc(1) and cmc(2)) and C(10)-C(14)TPB (for cmc(2)) formed ideal mixtures, whereas the rest were nonideal. In the nonideal binary mixtures, the ATPB components showed antagonistic interaction with each other. The cmc, interaction parameter (beta), mixed micellar composition, extent of counterion binding, and thermodynamic parameters for the micellization process have been reported and discussed. The enthalpy of mixed micelle formation has been found to have a fair correlation with a Clint-type relation applicable to ideal binary mixtures of surfactants.     

pH-responsive surface activity and solubilization with novel pyrrolidone-based Gemini surfactants

A new series of pH-responsive Gemini surfactants with 2-pyrrolidone head groups, N,N'-dialkyl-N,N'-di(ethyl-2-pyrrolidone)ethylenediamine (Di-C(n)P, where n = 6, 8 10, 12), were synthesized and characterized by (1)H NMR, (13)C NMR, ESI-MS, and elemental analysis. The surface activity and micellization behavior at acidic, neutral, and basic conditions were characterized by equilibrium surface tension and fluorescence techniques. It was found that the surface activity of Di-C(n)P depends on the pH of aqueous solutions due to the protonation state of surfactant molecules when pH was varied. The new compounds have lower cmc and γ(cmc) in comparison with that of m-2-m type conventional cationic Gemini surfactants and gluconamide-type nonionic Gemini surfactants. Fluorescence data confirm that micelles are formed when the concentration is above the cmc. Since micellization is of fundamental importance in surfactant applications such as solubilization, microemulsion, and related technologies, the significant difference in cmc at different pH of this new Gemini surfactant is employed to solubilize cyclohexane. The preliminary result indeed shows that the solubilization capacity of Di-C(n)P can be tuned by pH.     

可聚硼酸酯表面活性剂的表面化学性质及与LAS相互作用

用表面张力法研究了可聚合硼酸酯表面活性剂(BES)水溶液不同温度下(288-313 K)的表面活性和热力学函数变化；考察了BES与十二烷基苯磺酸钠(LAS)在0.5 mol·L-1 NaCl溶液中的相互作用. 结果表明, 298 K时, BES临界胶束浓度cmc达到0.066 mmol·L-1, γcmc为29.2 mN·m-1；在所考察的温度范围内BES胶束形成自由能(ΔG0m)在-22.4 - -25.8 kJ·mol-1之间, 胶束形成是熵驱动过程. BES/LAS混合体系为具有较大负偏差的非理想体系, BES/LAS分子间平均相互作用参数βm=-3.48；当溶液体相中BES摩尔分数αBES＝0.5时, 混合胶束中BES摩尔分数X1m为0.46, |βm|达到最大, 而且此时混合溶液cmc为0.017 mmol·L-1, 达到最低, γcmc为27.8 mN·m-1.     

Adsorption and micellar properties of a mixed system of nonionic-nonionic surfactants

We study the surface adsorption and bulk micellization of a mixed system of two nonionic surfactants, namely, ethylene glycol mono-n-dodecyl ether (C12E1) and tetraethylene glycol mono-n-tetradecyl ether (C14E4), at different mixing ratios at 15 degrees C. The pure C14E4 monolayer cannot show any indicative features of phase transition because of both hydration-induced and dipolar repulsive interactions between the bulky head groups. On the other hand, the monolayers of pure C12E1 and its mixture with C14E4 undergo a first-order phase transition, showing a variety of surface patterns in the coexistence region between the liquid expanded (LE) and liquid condensed (LC) phases under the same experimental conditions. For pure C12E1, the domains are of a fingering pattern while those for the C12E1/C14E4 mixed system are found to be compact circular and small irregular structures at 2:1 and 1:1 molar ratios, respectively. The critical micelle concentration (cmc) values of both the pure and the mixed systems were measured to understand the micellar behavior of the surfactants in the mixture. The cmc values of the mixed system were also calculated assuming ideal behavior of the surfactants in the mixture. The experimental and calculated values are found to be very close to each other, suggesting an almost ideal nature of mixing. The interaction parameters for mixed monolayer and micelle formation were calculated to understand the mutual behavior of the surfactants in the mixture. It is observed that the interaction parameters for mixed monolayer formation are more negative than those of micelle formation, indicating a stronger interaction between the surfactants during monolayer formation. It is concluded that since both the surfactants bear EO units in their head groups, structural parity and hydrogen bonding between the surfactants allow them to be closely packed during monolayer and micelle formation.     

Phenyl-ring-bearing cationic surfactants: effect of ring location on the micellar structure

A series of isomeric cationic surfactants (S1-S5) bearing a long alkyl chain that carries a 1,4-phenylene unit and a trimethyl ammonium headgroup was synthesized; the location of the phenyl ring within the alkyl tail was varied in an effort to understand its influence on the amphiphilic properties of the surfactants. The cmc's of the surfactants were estimated using ionic conductivity measurements and isothermal calorimetric titrations (ITC); the values obtained by the two methods were found to be in excellent agreement. The ITC measurements provided additional insight into the various thermodynamic parameters associated with the micellization process. Although all five surfactants have exactly the same molecular formula, their micellar properties were seen to vary dramatically depending on the location of the phenyl ring; the cmc was seen to decrease by almost an order of magnitude when the phenyl ring was moved from the tail end (cmc of S1 is 23 mM) to the headgroup region (cmc of S5 is 3 mM). In all cases, the enthalpy of micellization was negative but the entropy of micellization was positive, suggesting that in all of these systems the formation of micelles is both enthalpically and entropically favored. As expected, the decrease in cmc values upon moving the phenyl ring from the tail end to the headgroup region is accompanied by an increase in the thermodynamic driving force (ΔG) for micellization. To understand further the differences in the micellar structure of these surfactants, small-angle neutron scattering (SANS) measurements were carried out; these measurements reveal that the aggregation number of the micelles increases as the cmc decreases. This increase in the aggregation number is also accompanied by an increase in the asphericity of the micellar aggregate and a decrease in the fractional charge. Geometric packing arguments are presented to account for these changes in aggregation behavior as a function of phenyl ring location.     

Gemini表面活性剂烷烃尾链在吸附和聚集过程中的疏水协同效应(英文)

以表面张力法测定了系列Gemini表面活性剂m-6-m以及对应单体表面活性剂CmTABr的临界胶束浓度(cmc)和降低水表面张力20mN·m-1需要的浓度(pC20).比较这些参数表明m-6-m胶束化和在界面吸附的能力均强于CmTABr,这被归结为Gemini表面活性剂烷烃尾链间的疏水协同效应.与不对称Gemini表面活性剂12-6-m比较,对称的Gemini结构更有利于表面活性剂的聚集和吸附.