等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Core-shell lipid-polymer nanoparticles as a promising ocular drug delivery system to treat glaucoma

Nowadays,tremendous researches have been focused on the core-shell lipid-polymer nanoparticles(LPNs) due to the advantages of both liposomes and polymer nanoparticles.In this work,LPNs were applied to encapsulate brinzolamide(Brz-LPNs) for achieving sustained drug release,improving drug corneal permeation and enhancing drug topical therapeutic effect.The structure of Brz-LPNs was composed of poly(lactic-co-glycolic) acid(PLGA) nanocore which encapsulated Brz(Brz-NPs) and lipid shell around the core.Brz-LPNs were prepared by a modified thin-film dispersion method.With the parameters optimization of Brz-LPNs,optimal Brz-LPNs showed an average particle size of151.23±1.64 nm with a high encapsulation efficiency(EE) of 86.7%±2.28%.The core-shell structure of Brz-LPNs were confirmed by transmission electronic microscopy(TEM).Fourier transformed infrared spectra(FTIR) analysis proved that Brz was successfully entrapped into Brz-LPNs.Brz-LPNs exhibited obvious sustained release of Brz,compared with AZOPT^■ and Brz-LPs.Furthermore,the corneal accumulative permeability of Brz-LPNs significantly increased compared to the commercial available formulation(AZOPT^■) in vitro.Moreover,Brz-LPNs(1 mg/mL Brz) showed a more sustained and effective intraocular pressure(IOP) reduction than Brz-LPs(1 mg/mL) and AZOPT^■(10 mg/mL Brz) in vivo.In conclusion,Brz-LPNs,as promising ocular drug delivery systems,are well worth developing in the future for glaucoma treatment.     

Query generation to search for inhibitors of enzymatic reactions

A method for the generation of intermediates of enzyme-catalyzed reactions is presented. These intermediates can be used as three-dimensional structural queries for searching for inhibitors of enzymatic reactions. The intermediates can be considered as being structurally quite close to transition-state analogues. For this application, a database containing detailed chemical information on metabolic reactions is used. The likely three-dimensional structure of the intermediates of enzyme-catalyzed reactions can be generated from the information in the database. For three reactions catalyzed by the enzymes AMP deaminase (EC code 3.5.4.6), triose phosphate isomerase (EC code 5.3.1.1), and arginase II (EC code 3.5.3.1), we show how a 3D model of these intermediates can be superimposed onto known inhibitors of these enzymes by a program that uses a genetic algorithm. For this, we test different methods for the superimposition using information on the enzymatic binding site, using information on physicochemical properties calculated from the molecular structure, or without having any information in the superimposition process. We show that these inhibitors are most similar to the corresponding intermediates regarding the 3D structure.     

应用基团键贡献法计算烷烃和环烷烃的折光指数

根据分子中基团的特性和连接性,发展了一种直接根据分子结构信息计算烷烃和环烷烃折光指数的新方法－基团键贡献法,该方法既考虑分子中基团的特性,又考虑基团之间的连接性(化学键),同时具有基团贡献法和化学键贡献法的特点。应用基团键贡献法对950种烷烃和环烷烃折光指数的计算结果表明,计算值与实验值的一致性令人满意,平均误差0.11%,进一步对聚乙烯、聚丙烯和聚1-丁烯等聚合物的折光指数进行预测,也取得了令人满意的结果。     

计算环烷烃沸点的新方法——基团键贡献法

根据分子中基团的特性和连接性，发展了一种直接根据分子结构信息计算环烷 烃沸点的新方法——基团键贡献法，该方法既考虑分子中基团的特性，又考虑基团 之间的连接性（化学键），具有基团贡献法和化学键贡献法的特点。对256种环烷 烃沸点的计算结果表明，计算值与实验值的一致性令人满意，平均误差0.71。     

用拓扑指数和神经网络研究有机污染物的生物富集因子

在修正Randic的分子连接性指数和连接矩阵的基础上, 定义新型分子连接性指数(mF), 并计算了239种有机污染物的分子连接性指数(mF). 用其1F构建了239种有机污染物生物富集因子(lgBCF)的QSAR模型, 该模型判定系数(R2)及逐一剔除法(LOO)的交互验证系数(Q2)分别为0.747和0.742. 而用1F和4个电性距离矢量(Mk)构建的五元QSAR模型的R2及Q2分别为0.829和0.819. 结果表明, 从统计学的角度, 该模型具有高度的稳定性及良好预测能力. 从此模型可知, 有机污染物BCF的主要影响因素是—C—, ＞C—, —O—, —S—, —X等分子结构碎片以及分子的柔韧性、折叠程度等空间因素. 将5个结构参数作为人工神经网络的输入层结点, 采用5∶26∶1的网络结构, 利用BP算法, 获得了一个令人满意的QSAR模型, 其R2和标准偏差s分别为0.987和0.157, 表明lgBCF与这5个参数具有良好的非线性关系. 从上可见, 新建的连接性指数1F以及电性距离矢量与有机物的生物富集因子具有良好的相关性, 可望在物质构效关系研究中获得广泛的应用.     

Implementation of the complex coordinate method for resonances and photoionization cross sections by means of matrix element extrapolation

A new implementation of the complex coordinate method for calculation of molecular resonances and photoionization cross sections is presented. The method originates from the idea of analytic continuation of stabilization graphs, but instead all matrix elements are numerically continued. Exterior scaling is invoked in conjunction with the use of dilationally adapted basis sets. It is operationally equivalent to the bivariational method in the Feshbach-partitioned manifold of complex basis functions, but no complex integrals are calculated. Instead, the complex eigenvalue problem arises from the analytical continuation of the realvalued matrix elements pertinent to any atomic or molecular structure code in its standard (real) form. That includes the possibility of using numerical basis sets. Since the method does not require modification of existing numerical codes, it can serve as a complement to any large scale CI or MCSCF molecular structure calculation.     

计算烷烃沸点的新方法-基团键贡献法

根据分子中基团的特性和连接性,将基团贡献法和化学键贡献法结合在一起,发展了一种直接根据分子结构信息计算烷烃沸点的新方法-基团键贡献法,此方法同时具有基团贡献法和化学键贡献法的特点。对753种烷烃(C2～C100)的计算结果表明,沸点计算值与实验值的一致性令人满意,平均误差0.46%。     

A machine learning technique toward generating minimum energy structures of small boron clusters

The search for a global minimum related to molecular electronic structure and chemical bonding has received wide attention based on some theoretical calculations at various levels of theory. Particle swarm optimization (PSO) algorithm and modified PSO have been used to predict the energetically stable/metastable states associated with a given chemical composition. Out of a variety of techniques such as genetic algorithm, basin hopping, simulated annealing, PSO, and so on, PSO is considered to be one of the most suitable methods due to its various advantages over others. We use a swarm‐intelligence based parallel code to improve a PSO algorithm in a multidimensional search space augmented by quantum chemical calculations on gas phase structures at 0 K without any symmetry constraint to obtain an optimal solution. Our currently employed code is interfaced with Gaussian software for single point energy calculations. The code developed here is shown to be efficient. Small population size (small cluster) in the multidimensional space is actually good enough to get better results with low computational cost than the typical larger population. But for larger systems also the analysis is possible. One can try with a large number of particles as well. We have also analyzed how arbitrary and random structures and the local minimum energy structures gravitate toward the target global minimum structure. At the same time, we compare our results with that obtained from other evolutionary techniques.     

Study of localized molecular orbitals using group theory methods and its approach to the many-electron correlation problem. IV. The symmetry-adaptation of many-center integrals and hamiltonian matrix elements in MCSCF calculations

Group theoretic methods are presented for the transformations of integrals and the evaluation of matrix elements encountered in multiconfigurational self-consistent field (MCSCF) and configuration interaction (CI) calculations. The method has the advantages of needing only to deal with a symmetry unique set of atomic orbitals (AO) integrals and transformation from unique atomic integrals to unique molecular integrals rather than with all of them. Hamiltonian matrix element is expressed by a linear combination of product terms of many-center unique integrals and geometric factors. The group symmetry localized orbitals as atomic and molecular orbitals are a key feature of this algorithm. The method provides an alternative to traditional method that requires a table of coupling coefficients for products of the irreducible representations of the molecular point group. Geometric factors effectively eliminate these coupling coefficients. The saving of time and space in integral computations and transformations is analyzed. © 1994 by John Wiley & Sons, Inc.